ECG-Based Personal Identification Using Empirical Mode Decomposition and Hilbert Transform

Heart disease is still a heavy hitter on the list of leading causes of death around the globe, so getting ahead of the game with early and accurate predictions is crucial for effective treatment. Traditional diagnostic systems often put all their eggs in one basket, relying solely on clinical data or electrocardiogram (ECG) signals. This one-track approach can really throw a wrench in the works, limiting their predictive power. To tackle this head-on, we suggest a Hybrid Deep Learning Framework for Heart Disease Prediction Using Multi-Modal Clinical and ECG Data, which weaves together cutting-edge neural architectures, attention mechanisms, and ensemble strategies to boost performance and clarity.The framework gets the ball rolling by preprocessing UCI Cleveland clinical features with a bit of normalization and encoding, while ECG signals are put through the wringer with noise removal, segmentation, and scaling. Clinical data are shaped using machine learning classifiers and ANN, while ECG features are pulled together with CNN, BiLSTM, and Transformer layers to snag local, temporal, and contextual insights. A Graph Neural Network (GNN) weaves together the threads of clinical and ECG features, while a cross-attention fusion module dances to the rhythm of dynamically aligning and prioritizing the key features from both modalities. Predictions are cooked up using a stacked ensemble classifier, and model interpretability is kept in the clear through SHAP values, attention heatmaps, and graph attention visualization.The experimental evaluation reveals that the proposed method takes the cake, leaving the baseline models in the dust. Our framework hit the nail on the head with a whopping 94.8% accuracy, 93.5% precision, 95.1% recall, and 94.3% F1-score, leaving traditional machine learning in the dust at a mere 86.5%, and unimodal deep learning methods like CNN-BiLSTM and Transformer trailing behind at 89.7% and 90.4%, respectively. Talk about raising the bar!To wrap it all up, the suggested hybrid method hits the nail on the head by blending structured clinical data with ECG signals, providing top-notch predictive accuracy and clarity that’s second to none. This positions it as a strong contender for practical clinical decision support and the early detection of cardiovascular disease. Keywords: Heart Disease Prediction, Hybrid Deep Learning, Multi-Modal Fusion, ECG Signals, Cross-Attention, Graph Neural Network, Explainable AI,

PurposeSurface electromyography (sEMG) is vulnerable to environmental interference, low recognition rate and poor stability. Electrocardiogram (ECG) signals with rich information were introduced into sEMG to improve the recognition rate of fatigue assessment in the process of rehabilitation.MethodsTwenty subjects performed 150 min of Pilates rehabilitation exercise. Twenty subjects performed 150 min of Pilates rehabilitation exercise. ECG and sEMG signals were collected at the same time. Aftering necessary preprocessing, the classification model of improved particle swarm optimization support vector machine base on sEMG and ECG data fusion was established to identify three different fatigue states (Relaxed, Transition, Tired). The model effects of different classification algorithms (BPNN, KNN, LDA) and different fused data types were compared.ResultsIPSO-SVM had obvious advantages in the classification effect of sEMG and ECG signals, the average recognition rate was 87.83%. The recognition rates of sEMG and ECG fusion feature classification models were 94.25%, 92.25%, 94.25%. The recognition accuracy and model performance was significantly improved.ConclusionThe sEMG and ECG signal after feature fusion form a complementary mechanism. At the same time, IPOS-SVM can accurately detect the fatigue state in the process of Pilates rehabilitation. On the same model, the recognition effect of fusion of sEMG and ECG(Relaxed: 98.75%, Transition:92.25%, Tired:94.25%) is better than that of only using sEMG signal or ECGsignal. This study establishes technical support for establishing relevant man–machine devices and improving the safety of Pilates rehabilitation.

With the advent of the aging era, healthcare and elderly care have become the focus of medical care, especially the care of the elderly with dementia. Patients’ confidential data hiding is a useful technology for healthcare and patient information privacy. In this study, we implement an intelligent healthcare system using the multiple-coefficient quantization technology in transform domain to hide patients’ confidential data into electrocardiogram (ECG) signals obtained by ECG sensor module. In embedding patients’ confidential data, we first consider a non-linear model for optimizing the quality of the embedded ECG signals. Next, we apply simulated annealing (SA) to solve the non-linear model so as to have good signal-to-noise ratio (SNR), root mean square error (RMSE), and relative RMSE (rRMSE). Accordingly, the distortion of the PQRST complexes and the ECG amplitude is very small so that the embedded confidential data can satisfy the requirements of physiological diagnostics. In end devices, one can receive the ECG signals with the embedded confidential data and without the original ECG signals. Experimental results confirm the effectiveness of our method, which remains high quality for each ECG signal with the embedded confidential data no matter how the quantization size Q is increased.

Present paper deals with design and development of digital FIR filters. Heart diseases, which are one of the death reasons, are among the several serious problems in this century and as per the latest survey, 60% of the patients die due to Heart diseases. Electrocardiogram (ECG) signal plays a vital role in the monitoring and diagnosis of the health conditions of human heart. The basic ECG signal has the frequency range from .5Hz to 100Hz. The most significant noises that corrupt ECG signal are power line interference and baseline wanders. It becomes difficult for the Specialist to diagnose the diseases if artifacts are present in the ECG signal. Designing digital filters to reduce these noises is very important in ECG signal processing. In this work a digital FIR filter for reducing 50Hz power line noise in ECG signal is designed and implemented with different windowing methods as of Hamming, Kaiser, and Chebyshev. The work has been done in MATLAB environment. The result obtained for all FIR filters are compared by comparing the waveforms of the original and filtered ECG signals. The filter which gives the best results is the one using Chebyshev Window.

A QRS detection method is proposed based on the principal component analysis (PCA) and the combined wavelet entropy for 12-lead electrocardiogram (ECG) signals. Firstly, the base line wander and the high frequency interference are removed for ECG signals. The PCA method is employed to reduce the dimension of filtered signals. Then, the quasi-period sorting method is proposed to reorder principal components (PCs), which may help the following combined wavelet entropy based method detecting the QRS complex in the lower sorted PCs easily. The proposed method is evaluated against the standard St. Petersburg institute of cardiological technics 12-lead arrhythmia database with other two different QRS detection methods for the single-lead ECG signal and two-lead ECG signals respectively. Experimental results show that the proposed method gives the best overall performance. It achieves an average detection rate of 99.980%, a sensitivity of 99.997%, and a positive prediction of 99.987%.

This paper investigates the application of the newly proposed Kronecker-based method for the reconstruction of compressively sensed electrocardiogram (ECG) signals. By applying the Kronecker-based method, ECG signal acquisition is done in smaller lengths. Collection of smaller length of ECG signals leads to fewer arithmetic operations during the compression phase. Instead of recovering individually in smaller lengths, recovery is done over several concatenated segments. This newly proposed recovery method improves the quality of the reconstructed signal when compared to the traditional recovery done without concatenation. Two random measurement matrices, namely the Gaussian and the Bernoulli matrices, are considered as sensing matrices in this study and the methodology is evaluated using 10 ECG signals acquired from the MIT arrhythmia database. The random Bernoulli matrix is found to provide better quality of recovered compressed ECG signal even with the traditional compressive recovery techniques. Recovery by the newly proposed Kroneckerbased method results in higher SNR in all the ECG signals when the compression ratio (CR) is 25% or 50% and when the CR is 75%, improvement is observed in majority of the ECG signals. Lower CRs provide better reconstruction than higher CRs. The Kronecker-based recovery method may be useful for wearable ECG devices.

Electrocardiogram (ECG) signal processing aims basically 1) at artifact reduction to make the ECG signals cleaner and better interpretable by human or machine observers, 2) at revealing aspects not immediately observable in plain measured ECG signals even after artifact reduction, or 3) at diagnostics decision support and automated ECG signal interpretation, including classification of ECG signals into different classes associated with normal or pathological heart function. Thus, sports related applications aside, body surface ECG signal processing aims at enhancing ECG based diagnostics. In this Chapter, we review and demonstrate a statistical signal processing approach, independent component analysis (ICA), which is inherently very suitable for ECG signal processing regarding the aims 1) and 2) above, and also equally applicable as a component in systems aimed at accomplishing the aim 3). For more on general ECG signal processing, the reader is directed to the textbook written by Sornmo & Laguna (2005), and for a thorough treatment of ICA to the Hyvarinen’s book (Hyvarinen et al., 2001). A concise review on ICA in ECG signal processing has been presented by Castells et al. (2007a). In this Chapter, we describe and illustrate several widely adopted applications of ICA in ECG signal processing, and discuss associated practical aspects, some of which are not generally found in the literature. The treatment of the matter is aimed at conceptual and practical understanding, leaving the mathematical derivations and proofs far mostly for the interested reader to find in the references. ICA (Castells et al., 2007a; Comon, 1994; Hyvarinen et al., 2001; Hyvarinen & Oja, 2000; Naik & Kumar, 2011) is a statistical signal processing method for decomposing a set of signals into a set of mutually independent component signals. In general, in the applications of ICA, including in ECG signal processing, the objective is that the resulting independent component signals are the original source signals. Since ICA operates purely based on the input signals and a few assumptions, ICA belongs to the class of methods called blind source separation methods. For ICA, a source signal is called an independent component (IC). The terms ‘IC’ and ‘source signal’ are here used interchangeably. For ECG, the source signals are the bioelectrical signals generated by the heart, and all the possible artifact signals. Generally, ICA input signals are the observed signals, which may be measurement time series, such as sampled voltage values in time as in the case of ECGs, image pixel values, or basically any sets of values fulfilling the assumptions of ICA. In the sequel, the term

A visually interpretable detection method combines 3-D ECG with a multi-VGG neural network for myocardial infarction identification

This paper presents an algorithm formulated to identify the atrial fibrillation complications through electrocardiogram (ECG) signals. The ECG data for the study was retrieved from Physio Net which consists of normal, atrial fibrillation and other rhythms. The Discrete Wavelet Transform (DWT) was used to remove baseline wanders. Pan Tompkins algorithm was utilized to detect the P, Q, R, S and T peak and thus the ECG signals were segmented based on each cycle. The morphological features were extracted directly from the time-series while statistical features were extracted after Stockwell transform (S-transform) was applied to the data. Genetic Algorithm (GA) and reliefF algorithm have been applied separately to select the optimum features for classification purpose. Bagged Tree ensemble algorithm, Decision Tree and k-Nearest Neighbour (KNN) algorithm were used as classifiers to identify atrial fibrillation through ECG signals. The classification results with and without feature selection techniques are presented. Prior to the feature selection, Bagged Tree is the classifier best performing classifier with 86.50% of accuracy, 84.38% of sensitivity and 91.94% of specificity. After feature selection, all the three classifiers have almost the same performance which is nearly 100% of accuracy, sensitivity and specificity. This shows that the proposed combinations of algorithms are reliable and able to improve the identification rate of the normal, atrial fibrillation and other rhythms using lesser number of features.

The automatic identification of cardiac condition through dynamic modelling of electrocardiogram (ECG) signal has immense clinical significance as it eliminates the task of manual annotation of ECG recordings. In this study, an interacting multiple model (IMM)-based scheme has been proposed that helps in dynamically modelling and estimating the ECG signal. This model is having the adaptability of interchanging among several morphological representations. It offers the advantage of not necessitating user-specific parameters. This model does not necessitate a priori information about the ECG signal to initialise the filter parameters and delimitation of fiducial points of ECG signal. The particle filter (PF)-based schemes show superiority owing to their freedom from a single assumption on the signal model and noise model. Besides, it has got the potential of simultaneously tracking multiple pathological and morphological changes occurring in biomedical signals. Thus, the parameters of the model are estimated by adopting the PF, so that the myocardial infarction (MI) affected ECG signals can be efficiently tracked. Investigations on ECG signals from the MIT-BIH database and PTB diagnostic ECG database signify that the IMM-PF scheme can represent several MI morphologies with minimum prior information without distorting the helpful diagnostic information of ECG accurately.

Due to the capacity of processing signal with low energy consumption, compressive sensing (CS) has been widely used in wearable health monitoring system for arrhythmia classification of electrocardiogram (ECG) signals. However, most existing works focus on compressive sensing reconstruction, in other words, the ECG signals must be reconstructed before use. Hence, these methods have high computational complexity. In this paper, the authors propose a cardiac arrhythmia classification scheme that performs classification task directly in the compressed domain, skipping the reconstruction stage. The proposed scheme first employs the Pan–Tompkins algorithm to preprocess the ECG signals, including denoising and QRS detection, and then compresses the ECG signals by CS to obtain the compressive measurements. The features are extracted directly from these measurements based on principal component analysis (PCA), and are used to classify the ECG signals into different types by the proposed semi-supervised learning algorithm based on support vector machine (SVM). Extensive simulations have been performed to validate the effectiveness of the proposed scheme. Experimental results have shown that the proposed scheme achieves an average accuracy of [Formula: see text] at a sensing rate of 0.7, compared to an accuracy of [Formula: see text] for noncompressive ECG data.

PO-04-175 RECONSTRUCTING TWELVE-LEAD ELECTROCARDIOGRAM SIGNALS FROM A SINGLE-LEAD SIGNAL USING GENERATIVE ADVERSARIAL NETWORKS

Early detection of unusual heart conditions is of vital importance to recognize heart disappointment and maintain a strategic distance from unexpected death. The humans with similar heart conditions have been practically identical using electrocardiogram (ECG) signals. By reviewing the ECG signal models, one can anticipate heart disease. Since the standard techniques for heart disease disclosure depend upon securing morphological features of the ECG signals, which are repetitious and tedious, the customized recognizable proof of cardiovascular disease is progressively perfect. Subsequently, in order to have the programmed identification of heart diseases, a satisfactory strategy is required. This could arrange the ECG signals with dark features as appeared by the similitudes among them and the ECG signals with known features. If this classifier can discover the similitudes, the likelihood of cardiovascular disease disclosure is broadened. This count can change into a significant procedure in research facilities during this examination work. Another classification technique is brought into the system. The Asymmetric Back Propagation Neural Network classification methodology, which all the more precisely orders ECG signals that rely upon a powerful model of the Electrocardiogram (ECG) signal classification. With this proposed method, a convolutional gated recurrent neural network is constructed, and its simulation results show that this classification can partition the ECG with 98.5% accuracy.

Effective and powerful methods for denoising real electrocardiogram (ECG) signals are important for wearable sensors and devices. Deep Learning (DL) models have been used extensively in image processing and other domains with great success but only very recently have been used in processing ECG signals. This paper presents several DL models namely Convolutional Neural Networks (CNNs), Long Short-Term Memory (LSTM), Restricted Boltzmann Machine (RBM) together with the more conventional filtering methods (low pass filtering, high pass filtering, Notch filtering) and the standard wavelet-based technique for denoising EEG signals. These methods are trained, tested and evaluated on different synthetic and real ECG datasets taken from the MIT PhysioNet database and for different simulation conditions (i.e. various lengths of the ECG signals, single or multiple records). The results show the CNN model is a performant model that can be used for off-line denoising ECG applications where it is satisfactory to train on a clean part of an ECG signal from an ECG record, and then to test on the same ECG signal, which would have some high level of noise added to it. However, for real-time applications or near-real time applications, this task becomes more cumbersome, as the clean part of an ECG signal is very probable to be very limited in size. Therefore the solution put forth in this work is to train a CNN model on 1 second ECG noisy artificial multiple heartbeat data (i.e. ECG at effort), which was generated in a first instance based on few sequences of real signal heartbeat ECG data (i.e. ECG at rest). Afterwards it would be possible to use the trained CNN model in real life situations to denoise the ECG signal.

In this paper, the electrocardiogram (ECG) signal detecting, amplifying, anti-aliasing filtering circuits were designed and made to get the analog ECG signal, and then make it necessarily conditioned to meet the requirement of data acquisition card USB-6008( signal frequency: 0.05Hz ~ 159Hz, signal amplification: + 1000 times). Using the data acquisition card USB-6008 developed by NI Company for A/D conversion, digital form of ECG signal may be gotten, and it can be transmitted to a personal computer for further processing by LabVIEW2009 (evaluation version). We carried out multi-resolution analysis of the digital ECG signal and got ECG signal components in different sub bands. For the purpose of wavelet filtering, the ECG signal was reconstructed with the signal components in sub bands which reflect the characteristics of ECG and ideal effect of ECG was obtained.