Editorial overview: New protein production tools for structural biology

One of the most common issues in producing membrane proteins in heterologous expression systems is the low yield of purified protein. The solubilization efficiency of the recombinant membrane protein from biological membranes is often the limiting step. Here, we study the effects of titration of the GAL10-CYC promoter of Saccharomyces cerevisiae, induction time, and culture media, on the rat mitochondrial uncoupling protein (UCP1) production and solubilization levels. We found that a maximum threshold of solubilized UCP1 (70%) is reached at 0.003% galactose concentration, independently of time, temperature, and detergent-to-protein ratio during solubilization. Supplementation with 0.1% amino acids of the S-lactate medium at induction resumes cell growth and recombinant protein production. The purified UCP1 protein (0.2 mg/L) is homogenous in DDM detergent and active after reconstitution in proteoliposomes. To extend the impact of our findings, we applied the same promoter titration to produce the GFP-AT7B human transporter and found an optimal galactose concentration of 0.0015%. The protein data bank analysis revealed that these galactose concentrations are 300 times lower than usual. We propose a novel strategy for the recombinant production of membrane proteins in the yeast S. cerevisiae, which unlocks the use of this inexpensive eukaryotic host for membrane protein production.

Agrobacterium-mediated transient expression systems enable plants to produce a wide range of recombinant proteins on a rapid timescale. To achieve economically feasible upstream production and downstream processing, two yield parameters should be considered: (1) recombinant protein content per unit biomass and (2) recombinant protein productivity per unit area–time at the end of the upstream production. Because environmental factors in the upstream production have impacts on these parameters, environment control is important to maximize the recombinant protein yield. In this review, we summarize the effects of pre- and postinoculation environmental factors in the upstream production on the yield parameters and discuss the basic concept of environment control for plant-based transient expression systems. Preinoculation environmental factors associated with planting density, light quality, and nutrient supply affect plant characteristics, such as biomass and morphology, which in turn affect recombinant protein content and productivity. Accordingly, environment control for such plant characteristics has significant implications to achieve a high yield. On the other hand, postinoculation environmental factors, such as temperature, light intensity, and humidity, have been shown to affect recombinant protein content. Considering that recombinant protein production in Agrobacterium-mediated transient expression systems is a result of a series of complex biological events starting from T-DNA transfer from Agrobacterium tumefaciens to protein biosynthesis and accumulation in leaf tissue, we propose that dynamic environment control during the postinoculation process, i.e., changing environmental conditions at an appropriate timing for each event, may be a promising approach to obtain a high yield. Detailed descriptions of plant growth conditions and careful examination of environmental effects will significantly contribute to our knowledge to stably obtain high recombinant protein content and productivity, thus enhancing the utility of plant-based transient expression systems as recombinant protein factories.

In-cell nuclear magnetic resonance (NMR) spectroscopy has emerged as a leading technique in structural biology, providing atomic-level insights into the structures, dynamics, and interactions of biomolecules within their native cellular environments. By bridging the gap between conventional in vitro studies and the complexity of living systems, in-cell NMR enables direct observation of biomolecular behavior under near-physiological conditions. This review highlights recent methodological advances that have expanded the scope and feasibility of in-cell NMR. Innovations in isotopic labeling, including selective incorporation strategies, have enhanced spectral resolution and sensitivity. Optimized delivery approaches, such as microinjection and electroporation, facilitate efficient introduction of labeled biomolecules into diverse cell types. The use of cryogenically cooled probes and high-field magnets further improves signal detection, enabling the study of low-abundance targets. We discuss key applications, including protein folding, conformational dynamics, biomolecular interaction networks, and nucleic acid structural rearrangements. In addition, in-cell NMR has proven invaluable for drug discovery, providing mechanistic insights into intracellular drug-target interactions. Despite these advances, challenges remain, including spectral overlap from endogenous components, low intracellular concentrations, and maintaining cell viability during extended experiments. Future developments integrating cryo-electron microscopy (cryo-EM), mass spectrometry (MS), hyperpolarization techniques, and advanced labeling strategies promise to enhance sensitivity, resolution, and applicability, solidifying in-cell NMR as an indispensable tool for probing biomolecular function in living cells.

Biofilms have great potential for producing valuable products, and recent research has been performed on biofilms for the production of compounds with biotechnological and industrial relevance. However, the production of recombinant proteins using this system is still limited. The recombinant protein production in microbial hosts is a well-established technology and a variety of expression systems are available. Nevertheless, the production of some recombinant proteins can result in proteolyzed, insoluble, and non-functional forms, therefore it is necessary to start the exploration of non-conventional production systems that, in the future, could be helpful to produce some “difficult” proteins. Non-conventional production systems can be based on the use of alternative hosts and/or on non-conventional ways to grow recombinant cells. In this paper, the use of the Antarctic marine bacterium Pseudoalteromonas haloplanktis TAC125 grown in biofilm conditions was explored to produce two fluorescent proteins, GFP and mScarlet. The best conditions for the production were identified by working on media composition, and induction conditions, and by building a new expression vector suitable for the biofilm conditions. Results reported demonstrated that the optimized system for the recombinant protein production in biofilm, although it takes longer than planktonic production, has the same potentiality as the classical planktonic approach with additional advantages since it needs a lower concentration of the carbon sources and doesn't require antibiotic addition. Moreover, in the case of mScarlet, the production in biofilm outperforms the planktonic system in terms of a better quality of the recombinant product.

We propose a novel approach to the selection of Escherichia coli bacterial strains improved for the production of recombinant functional proteins. This approach is based on aggregation-induced toxicity of recombinant proteins. We show that selection of clones displaying a reduced toxicity is an efficient means of isolating bacteria producing recombinant protein with reduced aggregation in favour of correct folding. For an efficient selection, we found that time of toxicity induction must be precisely determined and recombinant protein must be expressed as a fusion with a protein whose activity is easily detectable on plates, thus allowing elimination of non-productive mutants. Choosing the expression to the periplasmic space of an scFv fragment fused to the N-terminus of alkaline phosphatase as a model, we selected chromosomal mutations that reduce aggregation-induced toxicity and showed that they concomitantly improve production of a functional recombinant hybrid. The effects of the mutations isolated could then be cumulated with those of other strategies used for recombinant scFv production. Thus, we could ensure a 6- to 16-fold increase in production of a functional scFv-PhoA hybrid. This is the first report demonstrating the possibility of directly selecting on agar plates E.coli strains improved for functional recombinant protein production from a large bacterial mutant library.

NMR solution structure determination of membrane proteins reconstituted in detergent micelles

A major bottleneck in protein structure determination via nuclear magnetic resonance (NMR) is the lengthy and laborious process of assigning resonances and nuclear Overhauser effect (NOE) cross peaks. Recent studies have shown that accurate backbone folds can be determined using sparse NMR data, such as residual dipolar couplings (RDCs) or backbone chemical shifts. This opens a question of whether we can also determine the accurate protein sidechain conformations using sparse or unassigned NMR data. We attack this question by using unassigned nuclear Overhauser effect spectroscopy (NOESY) data, which record the through-space dipolar interactions between protons nearby in 3D space. We propose a Bayesian approach with a Markov random field (MRF) model to integrate the likelihood function derived from observed experimental data, with prior information (i.e., empirical molecular mechanics energies) about the protein structures. We unify the side-chain structure prediction problem with the side-chain structure determination problem using unassigned NMR data, and apply the deterministic dead-end elimination (DEE) and A* search algorithms to provably find the global optimum solution that maximizes the posterior probability. We employ a Hausdorff-based measure to derive the likelihood of a rotamer or a pairwise rotamer interaction from unassigned NOESY data. In addition, we apply a systematic and rigorous approach to estimate the experimental noise in NMR data, which also determines the weighting factor of the data term in the scoring function that is derived from the Bayesian framework. We tested our approach on real NMR data of three proteins, including the FF Domain 2 of human transcription elongation factor CA150 (FF2), the B1 domain of Protein G (GB1), and human ubiquitin. The promising results indicate that our approach can be applied in high-resolution protein structure determination. Since our approach does not require any NOE assignment, it can accelerate the NMR structure determination process.

Engineered transient and stable overexpression of translation factors eIF3i and eIF3c in CHOK1 and HEK293 cells gives enhanced cell growth associated with increased c-Myc expression and increased recombinant protein synthesis

High-level production of recombinant proteins in industrial microorganisms is often limited by the formation of misfolded proteins or protein aggregates, which consequently induce cellular stress responses. We hypothesized that in a yeast Alzheimer's disease (AD) model overexpression of amyloid-β peptides (Aβ42), one of the main peptides relevant for AD pathologies, induces similar phenotypes of cellular stress. Using this humanized AD model, we previously identified suppressors of Aβ42 cytotoxicity. Here we hypothesize that these suppressors could be used as metabolic engineering targets to alleviate cellular stress and improve recombinant protein production in the yeast Saccharomyces cerevisiae. Forty-six candidate genes were individually deleted and twenty were individually overexpressed. The positive targets that increased recombinant α-amylase production were further combined leading to an 18.7-fold increased recombinant protein production. These target genes are involved in multiple cellular networks including RNA processing, transcription, ER-mitochondrial complex, and protein unfolding. By using transcriptomics and proteomics analyses, combined with reverse metabolic engineering, we showed that reduced oxidative stress, increased membrane lipid biosynthesis and repressed arginine and sulfur amino acid biosynthesis are significant pathways for increased recombinant protein production. Our findings provide new insights towards developing synthetic yeast cell factories for biosynthesis of valuable proteins.

Tauopathies, a group of neurodegenerative disorders, are characterized by the abnormal aggregation of microtubule-associated Tau proteins in neurons and glial cells. The process of Tau proteins transitioning from soluble, intrinsically disordered monomers to disease-associated aggregates is still unclear. Investigating these molecular mechanisms requires the reconstitution of such processes in cellular and in vitro models using recombinant proteins at high purity and yield. However, the production of phase-separating or aggregation-prone recombinant proteins like Tau’s hydrophobic-rich domains or disease mutation-carrying variants on a large scale is highly challenging due to their limited solubility. To overcome this challenge, we have developed an improved strategy for expressing and purifying recombinant Tau proteins using the major ampullate spidroin-derived solubility tag (MaSp-NT*). This approach involves using NT* as a fusion tag to enhance the solubility and stability of expressed proteins by forming micelle-like particles within the cytosol of E. coli cells. We found that fusion with the NT* tag significantly increased the solubility and yield of highly hydrophobic and/or aggregation-prone Tau constructs. Our purification method for NT* fusion proteins yielded up to twenty-fold higher amounts than proteins purified using our novel tandem-tag (6xHis-SUMO-Tau-Heparin) purification system. This enhanced expression and yield were demonstrated with full-length Tau (hT40/Tau441), its particularly aggregation-prone repeat domain (Tau-MTBR), and Frontotemporal dementia (FTD)-associated mutant (Tau-P301L). These advancements offer promising avenues for the production of large quantities of Tau proteins suitable for in vitro experimental techniques such as nuclear magnetic resonance (NMR) spectroscopy without the need for a boiling step, bringing us closer to effective treatments for tauopathies.

A Constraint-based modeling approach to reach an improved chemically defined minimal medium for recombinant antiEpEX-scFv production by Escherichia coli

Streptomyces as host for recombinant production of Mycobacterium tuberculosis proteins

Volume 39 Part 3 (2011) 719–723In the second paragraph of the ‘Membrane proteins as targets for recombinant protein production’ section, the date given for the publication of the first high-resolution crystallographic structure of a membrane protein should be 1985, not 1995 as written.

A Chinese hamster ovary (CHO) cell line is the primary choice for the production of recombinant protein drugs with glycosylation modification. Recombinant protein productivity was enhanced by the addition of dimethyl sulfoxide (DMSO) in CHO cells. However, DMSO induced G0/G1 phase growth arrest and reduced cell growth rate. A two-stage process was developed to utilize the stimulatory effect of DMSO on recombinant protein production and mitigate the problem of growth inhibition in this study. In the first stage, cells are cultured without DMSO for a certain period in order to obtain a high cell density. Sequentially, DMSO is added to achieve a high specific productivity in the second stage. Using this approach, we found that by adding 1% DMSO after 24 h of growth, macrophage colony-stimulating factor (M-CSF) volumetric productivity is increased by 57% compared with the value obtained without the addition of DMSO.

Proteome profiling of the inclusion body (IB) fraction of recombinant proteins produced in Escherichia coli suggested that two small heat shock proteins, IbpA and IbpB, are the major proteins associated with IBs. In this study, we demonstrate that IbpA and IbpB facilitate the production of recombinant proteins in E. coli and play important roles in protecting recombinant proteins from degradation by cytoplasmic proteases. We examined the cytosolic production, and Tat- or Sec-dependent secretion of the enhanced green fluorescent protein (EGFP) in wild type, ibpAB(-) mutant, and ibpAB-amplified E. coli strains. Analysis of fluorescence histograms and confocal microscopic imaging revealed that over-expression of the ibpA and/or ibpB genes enhanced cytosolic EGFP production whereas knocking out the ibpAB genes enhanced secretory production. This strategy seems to be generally applicable as it was successfully employed for the enhanced cytosolic or secretory production of several other recombinant proteins in E. coli.