Effective BST Approach to Find Underflow Condition in Interval Trees Using Augmented Data Structure

We develop the first dynamic data structures that tolerate δ memory faults, lose no data, and incur only an \(\tilde O(\delta)\) additive overhead in overall space and time per operation. We obtain such data structures for arrays, linked lists, binary search trees, interval trees, predecessor search, and suffix trees. Like previous data structures, δ must be known in advance, but we show how to restore pristine state in linear time, in parallel with queries, making δ just a bound on the rate of memory faults. Our data structures require Θ(δ) words of safe memory during an operation, which may not be theoretically necessary but seems a practical assumption.KeywordsInterval TreeSoft ErrorBinary Search TreeAdditive OverheadEuler TourThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

We prove new cell-probe lower bounds for dynamic data structures that maintain a subset of {1, 2, ..., n}, and compute various statistics of the set. The data structure is said to handle insertions non-adaptively if the locations of memory accessed depend only on the element being inserted, and not on the contents of the memory. For any such data structure that can compute the median of the set, we prove that:[EQUATION]where tins is the number of memory locations accessed during insertions, tmed is the number of memory locations accessed to compute the median, and w is the number of bits stored in each memory location. When the data structure is able to perform deletions non-adaptively and compute the minimum non-adaptively, we prove[EQUATION]where tmin is the number of locations accessed to compute the minimum, and tdel is the number of locations accessed to perform deletions. For the predecessor search problem, where the data structure is required to compute the predecessor of any element in the set, we prove that if computing the predecessors can be done non-adaptively, then[EQUATION]where tpred is the number of locations accessed to compute predecessors.These bounds are nearly matched by Binary Search Trees in some range of parameters. Our results follow from using the Sunflower Lemma of Erdos and Rado [11] together with several kinds of encoding arguments.

In this paper, we demonstrate that we can effectively use the results from the field of adaptive self‐organizing data structures in enhancing compression schemes. Unlike adaptive lists, which have already been used in compression, to the best of our knowledge, adaptive self‐organizing trees have not been used in this regard. To achieve this, we introduce a new data structure, the partitioning binary search tree (PBST) which, although based on the well‐known binary search tree (BST), also appropriately partitions the data elements into mutually exclusive sets. When used in conjunction with Fano encoding, the PBST leads to the so‐called Fano binary search tree (FBST), which, indeed, incorporates the required Fano coding (nearly equal probability) property into the BST. We demonstrate how both the PBST and the FBST can be maintained adaptively and in a self‐organizing manner. The updating procedure that converts a PBST into an FBST, and the corresponding new tree‐based operators, namely the shift‐to‐left and the shift‐to‐right operators, are explicitly presented. The encoding and decoding procedures that also update the FBST have been implemented and rigorously tested. Our empirical results on the files of the well‐known benchmarks, the Calgary and Canterbury Corpora, show that the adaptive Fano coding using FBSTs, the Huffman, and the greedy adaptive Fano coding achieve similar compression ratios. However, in terms of encoding/decoding speed, the new scheme is much faster than the latter two in the encoding phase, and they achieve approximately the same speed in the decoding phase. We believe that the same philosophy, namely that of using an adaptive self‐organizing BST to maintain the frequencies, can also be utilized for other data encoding mechanisms, even as the Fenwick scheme has been used in arithmetic coding. Copyright © 2008 John Wiley & Sons, Ltd.

Kakkot Tree is a Binary Searching Tree with the caching concept added. It is used to speed up the searching process that is carried on a Binary Search Tree. The time complexity of BST varies between O(n) and O(log n) depends upon the number of nodes that are present in left and right children. Kakkot Tree is a new data structure which is a variant of BST with some initial nodes which act like caching.

We present a new connection between self-adjusting binary search trees (BSTs) and heaps, two fundamental, extensively studied, and practically relevant families of data structures. Roughly speaking, we map an arbitrary heap algorithm within a natural model, to a corresponding BST algorithm with the same cost on a dual sequence of operations (i.e. the same sequence with the roles of time and key-space switched). This is the first general transformation between the two families of data structures. There is a rich theory of dynamic optimality for BSTs (i.e. the theory of competitiveness between BST algorithms). The lack of an analogous theory for heaps has been noted in the literature. Through our connection, we transfer all instance-specific lower bounds known for BSTs to a general model of heaps, initiating a theory of dynamic optimality for heaps. On the algorithmic side, we obtain a new, simple and efficient heap algorithm, which we call the smooth heap. We show the smooth heap to be the heap-counterpart of Greedy, the BST algorithm with the strongest proven and conjectured properties from the literature, widely believed to be instance-optimal. Assuming the optimality of Greedy, the smooth heap is also optimal within our model of heap algorithms. As corollaries of results known for Greedy, we obtain instance-specific upper bounds for the smooth heap, with applications in adaptive sorting. Intriguingly, the smooth heap, although derived from a non-practical BST algorithm, is simple and easy to implement (e.g. it stores no auxiliary data besides the keys and tree pointers). It can be seen as a variation on the popular pairing heap data structure, extending it with a "power-of-two-choices" type of heuristic.

This paper presents the analysis of element deletion in different data structures, like linked lists, binary search trees, stacks, and queues. For random data sequence, we build the linked list and binary search tree and we compare the element deletion procedure. We find the much more stable performance of the binary search tree than that of the linked list. Additionally, we analyze the stack as a complex data structure and its basic operations. We present the element deletion with the basic operations for array stack implementation and we note the limitations. Also, we present the element deletion problem for a queue as a complex data structure, implemented with an array. We present the element deletion with the basic queue operations and we point out the limitations.

We study multi-finger binary search trees (BSTs), a far-reaching extension of the classical BST model, with connections to the well-studied k-server problem. Finger search is a popular technique for speeding up BST operations when a query sequence has locality of reference. BSTs with multiple fingers can exploit more general regularities in the input. In this paper we consider the cost of serving a sequence of queries in an optimal (offline) BST with k fingers, a powerful benchmark against which other algorithms can be measured. We show that the k-finger optimum can be matched by a standard dynamic BST (having a single root-finger) with an O(log{k}) factor overhead. This result is tight for all k, improving the O(k) factor implicit in earlier work. Furthermore, we describe new online BSTs that match this bound up to a (log{k})^{O(1)} factor. Previously only the "one-finger" special case was known to hold for an online BST (Iacono, Langerman, 2016; Cole et al., 2000). Splay trees, assuming their conjectured optimality (Sleator and Tarjan, 1983), would have to match our bounds for all k. Our online algorithms are randomized and combine techniques developed for the k-server problem with a multiplicative-weights scheme for learning tree metrics. To our knowledge, this is the first time when tools developed for the k-server problem are used in BSTs. As an application of our k-finger results, we show that BSTs can efficiently serve queries that are close to some recently accessed item. This is a (restricted) form of the unified property (Iacono, 2001) that was previously not known to hold for any BST algorithm, online or offline.

We present a new linear-time algorithm for constructing multiway search trees with near-optimal search cost whose running time is independent of the size of the node in the tree. With the analysis of our construction method, we provide a new upper bound on the average search cost for multiway search trees that nearly matches the lower bound. In fact, it is tight for infinitely many probability distributions. This problem is well-studied in the literature for the case of binary search trees. Using our new construction method, we are able to provide the tightest upper bound on the average search cost for an optimal binary search tree.

The aim of this talk is to explain a pioneering exploratory research endeavour that attempts to merge two completely different fields in Computer Science so as to yield very fascinating results. These are the well-established fields of Neural Networks (NNs) and Adaptive Data Structures (ADS) respectively. The field of NNs deals with the training and learning capabilities of a large number of neurons, each possessing minimal computational properties. On the other hand, the field of ADS concerns designing, implementing and analyzing data structures which adaptively change with time so as to optimize some access criteria. In this talk, we shall demonstrate how these fields can be merged, so that the neural elements are themselves linked together using a data structure. This structure can be a singly-linked or doubly-linked list, or even a Binary Search Tree (BST). While the results themselves are quite generic, in particular, we shall, as a prima facie case, present the results in which a Self-Organizing Map (SOM) with an underlying BST structure can be adaptively re-structured using conditional rotations. These rotations on the nodes of the tree are local and are performed in constant time, guaranteeing a decrease in the Weighted Path Length of the entire tree. As a result, the algorithm, referred to as the Tree-based Topology-Oriented SOM with Conditional Rotations (TTO-CONROT), converges in such a manner that the neurons are ultimately placed in the input space so as to represent its stochastic distribution. Besides, the neighborhood properties of the neurons suit the best BST that represents the data.KeywordsLearning CapabilityBinary Search TreeAccess ProbabilityPrima Facie CaseAnalyze Data StructureThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

We present a provably linearizable and lock-free relaxed AVL tree called the non-blocking ravl tree. At any time, the height of a non-blocking ravl tree is upper bounded by log_d (2m) + c, where d is the golden ratio, m is the total number of successful INSERT operations performed so far and c is the number of active concurrent processes that have inserted new keys and are still rebalancing the tree at this time. The most significant feature of the non-blocking ravl tree is that it does not rebalance itself after DELETE operations. Instead, it performs rebalancing only after INSERT operations. Thus, the non-blocking ravl tree is much simpler to implement than other self-balancing concurrent binary search trees (BSTs) which typically introduce a large number of rebalancing cases after DELETE operations, while still providing a provable non-trivial bound on its height. We further conduct experimental studies to compare our solution with other state-of-the-art concurrent BSTs using randomly generated data sequences under uniform distributions, and find that our solution achieves the best performance among concurrent self-balancing BSTs. As the keys in access sequences are likely to be partially sorted in system software, we also conduct experiments using data sequences with various degrees of presortedness to better simulate applications in practice. Our experimental results show that, when there are enough degrees of presortedness, our solution achieves the best performance among all the concurrent BSTs used in our studies, including those that perform self-balancing operations and those that do not, and thus is potentially the best candidate for many real-world applications.

Tree-based string pattern matching on FPGAs

In this paper we introduce Range Query Timestamp Counter (RQ-TSC), a general approach to provide scalable and linearizable range query operations for highly concurrent lock-based data structures. RQ-TSC is a multi-versioned building block that relies on hardware timestamps (e.g., obtained through hardware timestamp counter register on x86_64) to generate version timestamps, which greatly reduce a point of contention on a shared atomic counter. To evaluate the performance of RQ-TSC, we apply it to three data structures: a linked list, a skip list, and a binary search tree. Experiments show that our approach can improve scalability significantly. Moreover, in almost all cases, range queries on these data structures built from our design perform as well as or better than state-of-the-art concurrent data structures that support linearizable range queries.

In a multiprocessor system, a lock-based scheme is used to ensure consistency and correctness during parallel processing. To manipulate a binary search tree in parallel, a process that modifies the current state of the data structure has to lock a certain portion of the tree. Lock-based schemes result in a longer wait time for the rest of the processes, particularly if a large portion of the tree has been locked. In a concurrent environment, the root of the binary search tree may therefore become a bottleneck, as it is the only entry point for all processes. To reduce the total wait time, it is possible to create and maintain a binary search tree with multiple roots, thereby allowing multiple processors to act upon different trees simultaneously. In this paper, we present static and dynamic methods to create and maintain a binary search tree with multiple roots. Without considerable overhead, a set of connected trees is created that resembles a forest, yet acts as a single binary search tree.

We consider the model of random trees introduced by Devroye [SIAM J. Comput. 28 (1999) 409-432]. The model encompasses many important randomized algorithms and data structures. The pieces of data (items) are stored in a randomized fashion in the nodes of a tree. The total path length (sum of depths of the items) is a natural measure of the efficiency of the algorithm/data structure. Using renewal theory, we prove convergence in distribution of the total path length toward a distribution characterized uniquely by a fixed point equation. Our result covers, using a unified approach, many data structures such as binary search trees, m-ary search trees, quad trees, median-of-(2k+1) trees, and simplex trees.

This paper presents an interactive, user-friendly tutoring system, which can be used to enhance students' understanding of the principles behind data structures. The system has the capability to display data structures graphically as well as providing the facility to allow users to perform the basic operations on the data structure generated. An animation-based approach has been developed to provide a step-by-step illustration of how various traversal techniques are performed in the context of binary search and AVL trees data structure. The system has a tutorial mode incorporating exercises, where students can learn basic concepts operations associated with each data structure. The evaluation was carried out by computer science undergraduate students in the School of Computing and Mathematics. It is generally acknowledged that the system was very useful in teaching students about data structures. This system can be used as an effective supplement to traditional teaching methods.