Efficient coding techniques algorithm for cluster-heads communication in wireless sensor networks

This letter gives a random construction for Low Density Parity Check (LDPC) codes, which uses an iterative algorithm to avoid short cycles in the Tanner graph. The construction method has great flexible choice in LDPC code’s parameters including codelength, code rate, the least girth of the graph, the weight of column and row in the parity check matrix. The method can be applied to the irregular LDPC codes and strict regular LDPC codes. Systemic codes have many applications in digital communication, so this letter proposes a construction of the generator matrix of systemic LDPC codes from the parity check matrix. Simulations show that the method performs well with iterative decoding.

Understanding Packet Delivery Performance In Dense Wireless Sensor Networks ∗ Computer Science Department University of Southern California Los Angeles, CA 90089-0781 Jerry Zhao Computer Science Department University of Southern California Los Angeles, CA 90089-0781 Ramesh Govindan zhaoy@usc.edu ABSTRACT Wireless sensor networks promise fine-grain monitoring in a wide variety of environments. Many of these environ- ments (e.g., indoor environments or habitats) can be harsh for wireless communication. From a networking perspec- tive, the most basic aspect of wireless communication is the packet delivery performance: the spatio-temporal charac- teristics of packet loss, and its environmental dependence. These factors will deeply impact the performance of data acquisition from these networks. In this paper, we report on a systematic medium-scale (up to sixty nodes) measurement of packet delivery in three different environments: an indoor office building, a habitat with moderate foliage, and an open parking lot. Our findings have interesting implications for the design and evaluation of routing and medium-access protocols for sensor networks. ramesh@usc.edu spectrum under use, the particular modulation schemes un- der use, and possibly on the communicating devices them- selves. Communication quality can vary dramatically over time, and has been reputed to change with slight spatial displacements. All of these are true to a greater degree for ad-hoc (or infrastructure-less) communication than for wire- less communication to a base station. Given this, and the paucity of large-scale deployments, it is perhaps not surpris- ing that there have been no medium to large-scale measure- ments of ad-hoc wireless systems; one expects measurement studies to reveal high variability in performance, and one suspects that such studies will be non-representative. Wireless sensor networks [5, 7] are predicted on ad-hoc wireless communications. Perhaps more than other ad-hoc wireless systems, these networks can expect highly variable wireless communication. They will be deployed in harsh, inaccessible, environments which, almost by definition will exhibit significant multi-path communication. Many of the current sensor platforms use low-power radios which do not have enough frequency diversity to reject multi-path prop- agation. Finally, these networks will be fairly densely de- ployed (on the order of tens of nodes within communica- tion range). Given the potential impact of these networks, and despite the anecdotal evidence of variability in wireless communication, we argue that it is imperative that we get a quantitative understanding of wireless communication in sensor networks, however imperfect. Our paper is a first attempt at this. Using up to 60 Mica motes, we systematically evaluate the most basic aspect of wireless communication in a sensor network: packet delivery. Particularly for energy-constrained networks, packet de- livery performance is important, since that translates to net- work lifetime. Sensor networks are predicated using low- power RF transceivers in a multi-hop fashion. Multiple short hops can be more energy-efficient than one single hop over a long range link. Poor cumulative packet delivery per- formance across multiple hops may degrade performance of data transport and expend significant energy. Depending on the kind of application, it might significantly undermine application-level performance. Finally, understanding the dynamic range of packet delivery performance (and the ex- tent, and time-varying nature of this performance) is impor- tant for evaluating almost all sensor network communication protocols. We study packet delivery performance at two layers of the communication stack (Section 3). At the physical-layer and in the absence of interfering transmissions, packet de- Categories and Subject Descriptors C.2.1 [Network Architecture and Design]: Wireless communication; C.4 [Performance of Systems]: Perfor- mance attributes, Measurement techniques General Terms Measurement, Experimentation Keywords Low power radio, Packet loss, Performance measurement 1. INTRODUCTION Wireless communication has the reputation of being no- toriously unpredictable. The quality of wireless communica- tion depends on the environment, the part of the frequency ∗ This work is supported in part by NSF grant CCR-0121778 for the Center for Embedded Systems. Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. To copy otherwise, to republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. SenSys’03, November 5–7, 2003, Los Angeles, California, USA. Copyright 2003 ACM 1-58113-707-9/03/0011 ... $ 5.00.

Turbo codes are attractive compared with Low Density Parity Check (LDPC) codes for Forward Error Correction (FEC) applications mainly due to their superior performance, especially at low Signal-to-Noise Ratio (SNR) such as are common in Powerline channels. For example, IEEE 1901-FFT PHY used the Turbo coding scheme defined in the HomePlug AV standards. However, patent fees are usually required for each turbo-code enabled manufactured device. The objective of this paper is to examine whether unlicensed LDPC codes, with optimized choices of block lengths, could be a viable alternative for future Powerline Communications (PLC) applications. The paper shows that the performance of the LDPC codes can approximate that of the Turbo codes with higher block lengths, on channels with typical and realistic PLC characteristics. The paper also shows that the additional complexity associated with this increase in block length can be mitigated by the use of Quasi-Cyclic LDPC (QC-LDPC) codes.

Low Density Parity Check (LDPC) codes have capacity-approaching performance over several channels of interest. In practice, for good block-error rate performance, the girth of the Tanner graph of an LDPC code needs to be as high as possible. In theory, to show that block-error rate approaches zero for increasing block-lengths, the girth of the Tanner graph sequence needs to tend to infinity with block-length. To meet these requirements, we construct sequences of large-girth irregular LDPC codes for a given degree-distribution pair (DDP) by applying a general node splitting algorithm on large girth graphs. The obtained Tanner graph meets the required DDP up to a suitable approximation. By optimizing the node-splitting method and using suitable large-girth graphs, we show code constructions with smaller block length for the same girth, when compared to previous constructions. Similar gains in block length are observed in the construction of sequences of large-girth protograph LDPC codes. Simulations, over a binary erasure channel, confirm the gains in block-error rate obtained by the large girth construction.

Big data storage demands larger cluster. The increasing size of the cluster may lead to failures of larger number of nodes. To provide reliable big data storage, replications are not cost-effective and does not provide a robust solution to prevent data loss. Traditional erasure codes applied in the RAID system such as Reed-Solomon (R-S) based solutions have limitations in providing high reliability. This is because higher reliability requires erasure codes with larger size. The computational cost of the R-S codes increase quadratically with the number of failures the R-S codes can tolerate for the same redundancy rate. It has been shown that Low Density Parity Check (LDPC) codes have lower computational cost and repair network traffic compared with R-S based solutions. Unfortunately, there does not exist a construction method for LDPC codes with larger size to control the computational cost and repair traffic. In this paper, a novel method is proposed to construct a family of LDPC codes - expanCodes with expandable sizes. The proposed expanCodes allows the encoding and decoding complexity remain unchanged with the increase of the size of the LDPC codes. As a result, increased reliability can be achieved without additional computation and repair traffic. The proposed expanCodes is integrated with the Hadoop system. Simulations show that more than 29% decrease in terms of encoding and decoding latency compared with R-S based solutions.

We propose a novel concatenated coding scheme combined Low Density Parity Check(LDPC) code and vertical Bell Labs layered space-time (VBLAST) code to improve the bit error rate (BER) performance for Free-space optical (FSO) communication links with On Off Keying(OOK) modulation. In the scheme, π-rotation encoding and belief-propagation (BP) decoding algorithm are employed in LDPC code, and minimum mean-square error (MMSE) soft-decision decoding algorithm is used for VBLAST code. Moreover, a joint iterative detection and decoding algorithm of VBLAST code and LDPC code is used to improve the overall link performance. At last, the BER of the proposed scheme over lognormal atmospheric turbulent fading channels is analyzed by using Monte Carlo method. The result shows that the BER of the proposed concatenated coding scheme is much improved than that only use VBLAST code scheme.

DOI: 10.1049/cp:20061337 ISBN: 0 86341 644 6 Location: Hangzhou, China Conference date: 6-9 Nov. 2006 Format: PDF The BER performance of presented quasi-cyclic (QC) low-density parity-check (LDPC) codes is not good as that of randomly constructed LDPC codes, while the lack of structure of randomly constructed LDPC codes implies serious disadvantages in terms of storing and accessing a large parity-check matrix. To solve the problems, this paper proposes a design of good quasi-cyclic (QC) low-density parity-check (LDPC) codes, the obtained algebraically structured codes have large minimum distances and good BER performance. The proposed design is based on index matrices, which determines the shifts of the circulant matrices of the sparse parity-check matrices. Compared with the presented design of QC LDPC codes, the designed QC LDPC codes are free from girth 4, sometimes free from girth 6, and have much larger minimum distances. Based on the algebraic code structure, the conditions of the girth and minimum distance of the codes are found. The BER performance of the designed QC LDPC block codes compares with that of randomly constructed LDPC codes for any block lengths. Better BER performance is obtained by increasing the circulant size of the base QC code. Simulations verify the construction of the QC LDPC codes to be valid. (4 pages) Inspec keywords: AWGN channels; error statistics; channel coding; algebraic codes; parity check codes; sparse matrices Subjects: Algebra; Other topics in statistics; Codes

In this paper, we propose a concatenated code by combining a Recursive Systematic Convolutional (RSC) code with a Low-Density Parity-Check (LDPC) code. The proposed concatenated code is encoded in parallel by an RSC encoder and an LDPC encoder without interleavers between them. When decoding the proposed concatenated code, the information bits are decoded by two decoding algorithms, and soft information is exchanged between the RSC decoder and the LDPC decoder. This allows for the elimination of wrong codewords output by each decoder. The use of an LDPC code allows us to halt the decoding process when the valid codeword is obtained. We evaluate the error rate performance of the proposed concatenated code by computer simulations. We show that the proposed concatenated code does not have a high error floor, and achieves better BLock Error Rate (BLER) performance than either conventional LDPC codes or conventional turbo codes in the high Eb/No region. We also show that since the proposed concatenated code can correct wrong codewords output by each decoder, it achieves better BLER than the regular LDPC code at the same Bit Error Rate (BER).

Aimed at the problem of unbalanced energy consumption of cluster heads caused by inter-cluster communications in wireless sensor networks clustering routing protocols, a novel algorithm named cluster head load balanced clustering (CHLBC) is presented. Based on uneven distributed cluster heads, CHLBC builds backbone network's inter-cluster transit route which is composed of cluster heads and calculates relay traffic of cluster heads. Sensors take the cluster head's relay traffic into consideration in the process of choosing the best cluster head and realize load balance of cluster heads. Simulation results show that the routing protocol effectively balances the load among cluster heads and achieves an obvious improvement on the network lifetime.

In this paper, a random Low-Density Parity-Check (LDPC) code is proposed for Noncontiguous Orthogonal Frequency Division Multiplexing (NC-OFDM) Cognitive Radio (CR) systems. Unlike other encoding schemes which achieve a system code rate of only 1/4 when half of the subcarriers are active, the proposed scheme achieves a system code rate of 1/2. The LDPC code is used to enhance the data transmission rate. A new channel model comprised of a binary erasure channel concatenated with an uncorrelated fading channel and an AWGN channel is adopted for NC-OFDM CR systems. Moreover, the adopted channel model is employed with density evolution algorithm to obtain good degree distribution pairs for the LDPC code. Thereafter, a modified shortest-path algorithm is used to construct the parity-check matrix for the LDPC code. Simulation results show that the proposed LDPC code performs well in terms of both error rate and data transmission rate.

Summary form only given. The ultimate performance limit or threshold of low-density parity-check (LDPC) codes is close to capacity over various memoryless channels (S.-Y. Chung, IEEE Trans. Info. Theory, vol. 47, pp. 657-670, 2001). Since the capacity of binary-input partial response (PR) channels is unknown, we estimate the capacity by calculating the threshold of capacity-approaching LDPC codes over these channels. We assume a BCJR equalizer for the channel and a sum-product message-passing decoder for the LDPC code. We also assume that the log-likelihood ratios (LLRs) in the channel BCJR and the LDPC decoder are Gaussian. We use our results to guide the design of decoder schedules that minimize the number of computationally expensive BCJR steps. The threshold calculation method can be used to optimize the left and right degree sequences of the LDPC code factor graph, using fast linear programming methods, to provide better thresholds than regular codes.

Low-density parity-check (LDPC) codes have been widely considered as error-correcting codes for next generation communication systems. A good LDPC decoder design requires both implementation friendly LDPC codes and efficient decoder architectures. The quality of LDPC code is crucial in determining the coding gain and implementation complexity of LDPC hardware decoders. This paper presented a genetic algorithm (GA) based LDPC code search algorithm with hardware considerations. Regular quasi-cyclic LDPC codes are used due to its friendliness to hardware implementation. Our hardware architecture design schedules pipeline LDPC decoding operation to boost the hardware utilization efficiency (HUE) of LDPC decoder. A LDPC decoder with a block size of 12288 is implemented in FPGA to validate our code and architecture design.

The application of Low Density Parity Check (LDPC) code in the anti-interference systems has drawn an increasing attention, due to its admiring performance which is very close to the theory limit. This paper focuses on a LDPC encoded slow frequency hopping (SFH) communication system with partial-band interference. Firstly, a modified soft- decision algorithm based on the utilization of interference information is proposed, and its performance is compared with some other soft-decision methods. Secondly, with numerical simulation, the influence of code rate, code length and the number of symbols per hops on the performance of the system with partial band noise interference is illustrated and examined in detail. Considering the great influence of hops per symbol on the performance, interleaver should be used and its influence on the performance is further examined by simulation. Finally, some constructive advises for the design of LDPC coded SFH system are given. Simulation results show that, with a reasonable design, the SFH system with LDPC code could achieve a desirable performance.

Low Density Parity Check (LDPC) codes have been widely used in communications systems due to their high error correction capabilities. Recently these codes are also investigated for being exploited in high performance storage systems, especially when Non-Volatile Memory (NVM) technologies are used. The main drawback of using LDPC codes in storage systems with a high number of parallel channels is the increased hardware complexity and cost, especially when variable rate codes are used. In this work, we present an architecture of a NVM-based storage system that dynamically adapts the LDPC's rate to the aging conditions of the storage device in order to maximize its lifetime capacity while keeping low its hardware complexity. In order to decrease the system's complexity we propose a PCIe-based architecture that uses a pool of LDPC decoders shared by all NVM channels and we study its effect on the system's lifetime capacity and the achievable I/O data rate.

RS (Reed - Solomon) code is used in DVB-H (digital video broadcasting - handheld) system as an addtional error correcting code to improve the performance during mobile reception. LDPC (low density parity check) code which is rediscovered recently shows the astonishing performance. Therefore LDPC code can be used to replace RS code in order to improve the performance further since both of them are block codes. So the performance of LDPC code in MPE-FEC (multi protocol encapsulation - forward error correction) frame of DVB-H system is analyzed in this paper.