Enhancing Cloud Storage Security with Intrusion Detection System using CNN and Grey Wolf Optimization Algorithm

Destructive cyber-attacks and cybercriminals are increasing with the increase in IoT (Internet of Things) devices globally. This ha/s led to the need for increase in security in IoT systems. Innovative and novel techniques are used by the intruders to accomplish malicious goals effectively through cyber-attacks. An Intrusion Detection System (IDS) is used for classification of attacks in IoT networks based on anomaly detection and machine learning techniques. Inefficiency is observed in the conventional machine learning models and intrusion detection techniques as the network technologies are unpredictable. Accurate identification of various anomalies is possible with deep learning models in several research segments. The input data along with its prominent characteristics may be categorized automatically for classification and anomaly detection using convolutional neural networks (CNN). Faster computations are enabled due to the performance efficiency of CNN. For IoT networks, an intrusion detection model based on anomaly detection is designed and developed in this paper. A multiclass classification framework is created initially using a CNN model. Further, 3D CNN is used for implementation of the proposed model. Various intrusion detection datasets from IoT networks are used for validation of the proposed CNN model. Pre-trained multiclass CNN model is used for implementation of multiclass and binary classification based on transfer learning. When compared to the conventional deep learning models, the proposed multiclass and binary classification framework has attained improved F1 score, recall, precision and accuracy.

Understanding the learning mechanism of convolutional neural networks in spectral analysis

This study leveraged Convolutional Neural Network (CNN) models to estimate canopy height in Southeast Australian forests before and after the 2019–2020 bushfire event, using inputs from Sentinel-1, Sentinel-2, spectral indices, and terrain features and GEDI canopy height (rh99) as target variables. Our research consisted of three primary objectives: (1) an evaluation of GEDI rh99 canopy height in relation to an nDSM derived from airborne LiDAR, (2) the development of two CNN models for pre- and post-fire scenarios, and (3) utilizing the trained CNN models to generate pre- and post-fire canopy height maps and canopy height change maps across the continuous landscape. GEDI rh99 accuracy analysis revealed R 2 = 0.85, RMSE = 7.25 m and nRMSE = 0.23 for pre-fire GEDI and R 2 = 0.78, RMSE = 10.1 m and nRMSE = 0.3 for post-fire GEDI. The pre-fire CNN model achieved R 2 = 0.75, RMSE = 7.29 m and nRMSE = 0.22, and post-fire CNN model achieved R 2 = 0.62, RMSE = 11.67 m, and nRMSE = 0.34 when validated against nDSM. Bias analysis was conducted, revealing that GEDI rh99 underestimated nDSM across all canopy height ranges, and slope has no significant impact on GEDI accuracy. Notably, post-fire GEDI rh99 exhibited significant underestimation in high to extreme fire severity. The CNN models’ prediction displayed overestimation in short forests < 20 m and increasing underestimation in taller forests > 20 m and underestimation in high and extreme fire severity. Subsequent investigation indicated that canopy layer thinning in high fire severity conditions resulted in weak GEDI waveform signals and consequent bias. Additionally, the GEDI rh99 bias was propagated to the CNN models, together with insensitivity of spectral band values to canopy height in dense and burnt forests potentially contributed to models’ bias. Finally, we demonstrated CNN models’ ability to monitor forest recovery by generating canopy height maps spanning East Gippsland from 2019 to 2023.

Automatic prediction of citrus fruit diseases requires the selection of a suitable classification model among various Convolutional Neural Network (CNN) models. The CNN models are the most effective for image classification. However, more than one CNN model occasionally performs closer to each other. Choosing the best classification model requires considerable effort in this situation. In this study, 17 CNN models were used for citrus fruit disease identification. Citrus fruit diseases include anthracnose, blackspot, canker, scab, and healthy. In this research, the performance of CNN models was analysed, and a two-phase statistical analysis was carried out to determine which CNN model provided the most accurate predictions of citrus crop disease. The 17 CNN models used were AlexNet, Darknet, Densenet, efficientnet, nasnetlarge, googlenet, inceptionresnetv2, inceptionv3, mobilenetv2, nasnetmobile, Xception, squeezenet, resnet18, resnet50, resnet101, vgg16, and vgg19. The two-phase statistical analysis was Duncan's multiple range test, followed by the Wilcoxon signed-rank test is the second one. Again, in order to do a statistical analysis, nine different indicators, including “accuracy, sensitivity, specificity, precision, FPR, F1 Score, MCC, Kappa, and computing time”, were taken into consideration. After the execution of 17 CNN models and twophase statistical analysis, it was revealed that resnet101 is superior among CNN models for citrus fruit disease prediction.

To better understand and improve the prediction of the seasonal surface temperature (TS) across the United States, we employed convolutional neural network (CNN) models trained on the Community Earth System Model Version 2 Large Ensemble (CESM2 LENS). We used lagged sea surface temperatures (SST) over the tropical Pacific region, containing the information of the El Niño Southern Oscillation (ENSO), as input for the CNN models. ENSO is the principal driver of variability in seasonal US surface temperatures (TSUS) and employing CNN models allows for spatiotemporal aspects of ENSO to be analyzed to make seasonal TSUS predictions. For predicting TSUS, the CNN models exhibited significantly improved skill over standard statistical multilinear regression (MLR) models and dynamical forecasts across most regions in the US, for lead times ranging from 1 to 6 months. Furthermore, we employed the CNN models to predict seasonal TSUS during extreme ENSO events. For these events, the CNN models outperformed the MLR models in predicting the effects on seasonal TSUS, suggesting that the CNN models are able to capture the ENSO‐TSUS teleconnection more effectively. Results from a heatmap analysis demonstrate that the CNN models utilize spatial features of ENSO rather than solely the magnitude of the ENSO events, indicating that the improved skill of seasonal TSUS is due to analyzing spatial variation in ENSO events. The proposed CNN model demonstrates a promising improvement in prediction skill compared to existing methods, suggesting a potential path forward for enhancing TSUS forecast skill from subseasonal to seasonal timescales.

Distinguishing pericarpium citri reticulatae of different origins using terahertz time-domain spectroscopy combined with convolutional neural networks

Among the many deep learning methods, the convolutional neural network (CNN) model has an excellent performance in image recognition. Research on identifying and classifying image datasets using CNN is ongoing. Animal species recognition and classification with CNN is expected to be helpful for various applications. However, sophisticated feature recognition is essential to classify quasi-species with similar features, such as the quasi-species of parrots that have a high color similarity. The purpose of this study is to develop a vision-based mobile application to classify endangered parrot species using an advanced CNN model based on transfer learning (some parrots have quite similar colors and shapes). We acquired the images in two ways: collecting them directly from the Seoul Grand Park Zoo and crawling them using the Google search. Subsequently, we have built advanced CNN models with transfer learning and trained them using the data. Next, we converted one of the fully trained models into a file for execution on mobile devices and created the Android package files. The accuracy was measured for each of the eight CNN models. The overall accuracy for the camera of the mobile device was 94.125%. For certain species, the accuracy of recognition was 100%, with the required time of only 455 ms. Our approach helps to recognize the species in real time using the camera of the mobile device. Applications will be helpful for the prevention of smuggling of endangered species in the customs clearance area.

Excessive withdrawal of groundwater for agricultural irrigation can cause seawater intrusion into coastal aquifers. Such a case will in turn results in deterioration of irrigation water quality. Determination of irrigation water quality with traditional methods is a time-consuming and costly process. However, machine learning algorithms can be useful tools for modeling and estimating groundwater quality used for irrigation water purposes. In this study, TDS, PS, SAR, and Cl parameters of groundwater were estimated with models based on EC and pH variables. For this purpose, prediction performances of two different deep learning methods (convolutional neural network (CNN) and deep neural network (DNN)) and two different classical machine learning (Random Forest (RF) and extreme gradient boosting (XGBoost)) methods were compared. In addition, predictive uncertainty of the models was determined by quantile regression (QR) analysis. Performance criteria and results of uncertainty analysis revealed that CNN (in testing phase, NSE = 0.95 for TDS, NSE = 0.96 for PS, NSE = 0.67 for SAR and NSE = 0.93 for CI) and DNN (in testing phase, NSE = 0.91 for TDS, NSE = 0.91 for PS, NSE = 0.57 for SAR and NSE = 0.94 for Cl) models had quite a close performance in estimation of TDS, PS, SAR, and Cl parameters and higher than the other two classical machine learning methods. As a result, the CNN model can be considered the best performing model in estimating all quality parameters due to the highest NSE and lowest RMSE values. In addition, the Taylor diagram showed that the values estimated using the CNN model had the highest correlation with the measured data. It was determined that the model with the lowest uncertainty based on the PICP statistics was DNN, followed by the CNN model. However, the CNN model has predicted outliers more accurately. Present findings proved that deep learning models could offer efficient tools for predicting irrigation water quality parameters.

The main goal of this research was to accurately diagnose diseases in pepper plants using convolutional neural network (CNN) models and visual parameters features. Thus, we aimed to build a computing system that can utilise visual cues to identify plant diseases with almost 100% reliability. A total of 2,200 images were trained and tested on a dataset, which was divided into healthy leaves and those with bacterial ailments. The images were preprocessed, resized to 300x300 pixels, and then segmented to extract the relevant traits from them. This CNN model, in a word, is accurate because it detects diseases with 99.65% accuracy. If we want to speak of a high accuracy rate, that's the CNN model. It learns to identify the intricate patterns and features in pepper plants that are associated with diseases. CNN can make revolutionary changes to the identification of plant diseases and help prevent crop damage through timely treatments. Automatic identification of the disease makes life easier for both agriculturists and scientists. The results underscore the importance of image preprocessing, segmentation, and feature extraction in improving the ability of CNN models to locate diseases. Additionally, the performance of the CNN model was compared with other machine learning models such as KNN, Decision Tree, ANN, and Random Forest. It was found that the developed CNN model can predict the response with greater accuracy than the others. Modern high-tech precision farming systems might utilise proposed CNN models for plant disease diagnosis.

BACKGROUND AND AIM: Outdoor ultrafine particles (UFP; 100 nm) and black carbon (BC) vary greatly within cities and may have adverse impacts on human health such as cardiovascular mortality and brain tumour incidence. Traditional regression methods for estimating spatial distributions of ambient air pollution depend on extensive, curated geospatial information system databases. This has resulted in a disparity wherein little is known about local air pollution in the data-sparse settings of low- and middle- income countries. We used a hybrid approach to develop new models to estimate within-city spatial variations in outdoor UFP and BC concentrations across Bucaramanga, Colombia. METHODS: We conducted a large-scale mobile monitoring campaign over twenty days in 2019. Land use regression (LUR) models were developed using land use parameters from curated and open-source databases. Convolutional Neural Network (CNN) models were developed using Google Maps satellite view and street view images. Combined models were developed by combining predictions from the LUR and CNN models. After training in the training and validation sets, predictions were generated in the test set and compared to measured values. RESULTS:The combined UFP model (R2=0.54) outperformed the CNN (R2=0.47) and land use regression (LUR) models (R2=0.47) on their own. Similarly, the combined BC model also outperformed the CNN and LUR BC models (R2 = 0.51 vs 0.43 and 0.45 respectively). Spatial variations in model performance were more stable for the CNN and combined models compared to the LUR models suggesting that the combined approach may be less likely to contribute to differential exposure measurement error in epidemiological studies. CONCLUSIONS:Estimates from these models can then be applied to population-based cohorts in order to evaluate population health risks. Additionally, our findings demonstrated that satellite and street-level images can be combined with a traditional LUR modelling approach to improve predictions of within-city spatial variations in outdoor UFP and BC concentrations. KEYWORDS: Ultrafine particles, Black Carbon, Deep learning, Images, Land use regression

Accurately identifying epileptogenic zone (EZ) using high-frequency oscillations (HFOs) is a challenge that must be mastered to transfer HFOs into clinical use. We analyzed the ability of a convolutional neural network (CNN) model to distinguish EZ and non-EZ HFOs. Nineteen medically intractable epilepsy patients with good surgical outcomes 2 years after surgery were studied. Five-minute interictal intracranial electroencephalogram epochs of slow-wave sleep were selected randomly. Then 5 s segments of ripples (80–200 Hz) and fast ripples (FRs, 200–500 Hz) were detected automatically. The EZs and non-EZs were identified using the surgery resection range. We innovatively converted all epochs into four types of images using two scales: original waveforms, filtered waveforms, wavelet spectrum images, and smoothed pseudo Wigner–Ville distribution (SPWVD) spectrum images. Two scales were fixed and fitted scales. We then used a CNN model to classify the HFOs into EZ and non-EZ categories. As a result, 7,000 epochs of ripples and 2,000 epochs of FRs were randomly selected from the EZ and non-EZ data for analysis. Our CNN model can distinguish EZ and non-EZ HFOs successfully. Except for original ripple waveforms, the results from CNN models that are trained using fixed-scale images are significantly better than those from models trained using fitted-scale images (p < 0.05). Of the four fixed-scale transformations, the CNN based on the adjusted SPWVD (ASPWVD) produced the best accuracies (80.89 ± 1.43% and 77.85 ± 1.61% for ripples and FRs, respectively, p < 0.05). The CNN using ASPWVD transformation images is an effective deep learning method that can be used to classify EZ and non-EZ HFOs.

Pinhole corrosions on oil and gas pipelines are difficult to detect and size and, therefore, pose a significant challenge to the pipeline integrity management practice. This study develops two convolutional neural network (CNN) models to identify pinholes and predict the sizes and location of the pinhole corrosions according to the magnetic flux leakage signals generated using the magneto-static finite element analysis. Extensive three-dimensional parametric finite element analysis cases are generated to train and validate the two CNN models. Additionally, comprehensive algorithm analysis evaluates the model performance, providing insights into the practical application of CNN models in pipeline integrity management. The proposed classification CNN model is shown to be highly accurate in classifying pinholes and pinhole-in-general corrosion defects. The proposed regression CNN model is shown to be highly accurate in predicting the location of the pinhole and obtain a reasonably high accuracy in estimating the depth and diameter of the pinhole, even in the presence of measurement noises. This study indicates the effectiveness of employing deep learning algorithms to enhance the integrity management practice of corroded pipelines.

Predicting the thermal conductivity of polymer composites with one-dimensional oriented fillers using the combination of deep learning and ensemble learning

Rice is the staple food in Bangladesh. Every year many crops are lost because of the disease of the rice plant. Our farmers are facing a great loss every year as well as rice productivity is declining. Some diseased and healthy leaf images of rice plants have been collected. The images have been classified into four classes. The classes are Brown Spot, Hispa, Leaf Blast diseased leaves, and Healthy leaves, usually known as Oryza Saiva diseases of rice. Deep learning is very common and popular to analyze and make predictions from these kind of image data. In this research, the CNN (Convolutional Neural Network) models have been used to predict the classes. Among various CNN models, VGG16, MobileNet, ResNet50, and DenseNet121 pre-trained models have been applied. Among those pre-trained models, the highest accuracy 95.3% has been found from the VGG16 model. In addition, an Android mobile app has been developed using the highest performant VGG16 trained model. Using this mobile app, farmers will be able to upload a photo and predict the disease of that rice plant or not in a convenient way.

PurposeSemantic segmentation is a fundamental part of the surgical application of deep learning. Traditionally, segmentation in vision tasks has been performed using convolutional neural networks (CNNs), but the transformer architecture has recently been introduced and widely investigated. We aimed to investigate the performance of deep learning models in segmentation in robot-assisted radical prostatectomy (RARP) and identify which of the architectures is superior for segmentation in robotic surgery.Materials and MethodsIntraoperative images during RARP were obtained. The dataset was randomly split into training and validation data. Segmentation of the surgical instruments, bladder, prostate, vas and seminal vesicle was performed using three CNN models (DeepLabv3, MANet, and U-Net++) and three transformers (SegFormer, BEiT, and DPT), and their performances were analyzed.ResultsThe overall segmentation performance during RARP varied across different model architectures. For the CNN models, DeepLabV3 achieved a mean Dice score of 0.938, MANet scored 0.944, and U-Net++ reached 0.930. For the transformer architectures, SegFormer attained a mean Dice score of 0.919, BEiT scored 0.916, and DPT achieved 0.940. The performance of CNN models was superior to that of transformer models in segmenting the prostate, vas, and seminal vesicle.ConclusionsDeep learning models provided accurate segmentation of the surgical instruments and anatomical structures observed during RARP. Both CNN and transformer models showed reliable predictions in the segmentation task; however, CNN models may be more suitable than transformer models for organ segmentation and may be more applicable in unusual cases. Further research with large datasets is needed.