Evaluating the effects of similar-class combination on class integration test order generation

This paper examines the possibilities of using Landsat Thematic Mapper images for updating land-use information on topographic maps. Information obtained from satellite images can be kept up-todate and a large number of classes can be distinguished. However, the quality of the information still leaves much to be desired, with a reliability of no more than 40 - 90 %. By using digitized landuse information from a topographic map as a source of contest information the reliability could be improved considerably. The method permitted the Identification of a large number of additional classes and provided quantitative insight into the dynamics of landscap change. Verification using 1:18,000 scale aerial photographs and field data showed the results to have a reliability of over 95 %. It can be expected that whereever topographic maps permit the extraction of land-use information in a similar way as described in this paper, remote sensing information will meet operational accuracy requirements for many fields of application e.g. physical planning, map udating, land-use planning etc. Paper presented at the IGARSS'88 conference Remote Sensing - moving towards the 21st century in Edinburgh, Scotland, 12-16 September 1988

Conventional application of convolutional neural networks (CNNs) for image classification and recognition is based on the assumption that all target classes are equal (i.e. no hierarchy) and exclusive of one another (i.e. no overlap). CNN-based image classifiers built on this assumption, therefore, cannot take into account an innate hierarchy among target classes (e.g. cats and dogs in animal image classification) or additional information that can be easily derived from the data (e.g. numbers larger than five in the recognition of handwritten digits), thereby resulting in scalability issues when the number of target classes is large. Combining two related but slightly different ideas of hierarchical classification and logical learning by auxiliary inputs, we propose a new learning framework called hierarchical auxiliary learning, which not only address the scalability issues with a large number of classes but also could further reduce the classification/recognition errors with a reasonable number of classes. In the hierarchical auxiliary learning, target classes are semantically or non-semantically grouped into superclasses, which turns the original problem of mapping between an image and its target class into a new problem of mapping between a pair of an image and its superclass and the target class. To take the advantage of a superclass as a hint during the learning phase, we introduce an auxiliary block into a neural network, which generates auxiliary scores used as additional information for final classification/recognition; in this paper, we add the auxiliary block between the last residual block and the fully-connected output layer of the ResNet. Experimental results show that the proposed hierarchical auxiliary learning reduces classification errors up to 0.56, 1.6 and 3.56 percent with MNIST, SVHN and CIFAR-10 datasets, respectively.

The label tree-based classification is one of the most popular approaches for reducing the testing complexity to sublinear with the large number of classes. One of the popular approaches to generate the label tree is to apply recursively a spectral clustering algorithm to an affinity matrix for partition set of class labels into subsets, each subset corresponds to a child node of the tree. To obtain the affinity matrix from confusion matrix, a set of N binary one-versus-all classifiers is trained and applied on validation set, where N is number of classes. However, these approaches are not reliable when there are a large number of classes because it is too costly to train these classifiers. Furthermore, the affinity matrix could not reflect the real similarity among classes due to the classification accuracy can be low. In addition, the resulting label tree may not be balanced due to the objective function of spectral clustering penalizes unbalanced partitions. In this paper, to achieve better similarity measurement between classes and without using one-versus-all classifiers, we adopt the sum match kernel to get similarity matrix. Moreover, we propose a heuristic for learning balanced tree structure by adjusting the number of class labels in clusters after the spectral clustering is done. The experimental results on benchmark datasets SUN-397 and Caltech-256 show that the performance of the proposed approach outperforms significantly the other approaches.

The state-of-the-art object detection and image classification methods can perform impressively on more than 9k classes. In contrast, the number of classes in semantic segmentation datasets is relatively limited. This is not surprising when the restrictions caused by the lack of labeled data and high computation demand for segmentation are considered. In this paper, we propose a novel training methodology to train and scale the existing semantic segmentation models for a large number of semantic classes without increasing the memory overhead. In our embedding-based scalable segmentation approach, we reduce the space complexity of the segmentation model’s output from O(C) to O(1), propose an approximation method for ground-truth class probability, and use it to compute cross-entropy loss. The proposed approach is general and can be adopted by any state-of-the-art segmentation model to gracefully scale it for any number of semantic classes with only one GPU. Our approach achieves similar, and in some cases, even better mIoU for Cityscapes, Pascal VOC, ADE20k, COCO-Stuff10k datasets when adopted to DeeplabV3+ model with different backbones. We demonstrate a clear benefit of our approach on a dataset with 1284 classes, bootstrapped from LVIS and COCO annotations, with almost three times better mIoU than the DeeplabV3+. Our source code is available at: https://github.com/shipra25jain/ESSNet.

A learning-based classification problem with a large number of classes is considered. The error-correcting-output-codes (ЕСОС) scheme is optimized. An initial binary matrix is formed at random so that the number of its rows is equal to the number of classes and each column corresponds to the union of several classes in two macroclasses. In the ЕСОС approach, a binary classification problem is solved for every object to be recognized and for every union. The object is assigned to the class with the nearest code row. A generalization of the ЕСОС approach is presented in which a discrete optimization problem is solved to find optimal unions, probabilities of correct classification are used in dichotomy problems, and the degree of dichotomy informativeness is taken into account. If the solution algorithms for the dichotomy problems are correct, the recognition algorithm for the original problem is correct as well.

Visual thalamic neurons were stained in a Golgilike fashion following cortical injections of horseradish peroxidase (HRP). Such staining allows neurons to be classified on the basis of their dendritic morphology, and it enables the direct relation of morphologically identified neurons with their respective cortical projection target to be visualized. All classes of neurons categorized on the basis of Golgi material (Guillery, '66) were identified in the dorsal part of the lateral geniculate body (LGBd): class 1 and class 2 neurons in the laminae A, A1, and C; class 3 neurons in laminae A and A1; class 4 cells in the C‐laminae. Three subtypes of class 4 neurons were differentiated: round cells, spindle cells, and fusiform cells. The round subtype is similar in dendritic morphology to the class 3 neurons, but its soma is larger (mean soma diameter 17 μm compared with 13 μm). Other types of neurons were identified in the laminae A, A1, and C, having morphological characteristics intermediate between class 1 and class 2, and between class 2 and class 3.Class 1 neurons, class 2 neurons, and flat neurons were identified in the medial interlaminar nucleus (MIN). The flat type is similar in morphology to the fusiform type in the C‐laminae; however, its soma is larger (mean soma diameter 23 μm compared with 19 μm), and its dendrites are free of appendages.In the extrageniculate nuclei three types of neurons were found: class 2 neurons in the pulvinar, medium‐sized cells—probably class 5—in the pulvinar and in the nucleus lateralis posterior, and neurons with an isodendritic branching pattern in the intralaminar nuclei.The cortical projections of the various thalamic cell classes were analyzed by injection of HRP into acallosal parts, or callosal parts of area 17 or area 18. Area 17 receives input from a large number of class 2 neurons and from a moderate number of class 1 neurons in the LGBd. In contrast, area 18 receives a dominant input from class 1 neurons and only weak input from class 2 neurons (up to 10% of the population of projection cells in the individual cases).Class 3 neurons in the A‐laminae and class 4 neurons in the C‐laminae project to either cortical area. Class 2 neurons in MIN project only to callosal parts of area 18, whereas class 2 neurons in pulvinar project in addition to acallosal parts of area 18. The significant change in the relative number of class 1 and class 2 neurons in the LGBd occurs gradually across the callosal zone from area 17 to area 18; it is not strictly related to the 17/18 border as defined by cytoarchitectonic or physiological criteria. The class 1/class 2 relation in the projection to area 18 is independent of eccentricity in the A‐laminae. An increase in the frequency of occurrence with eccentricity is noted, however, for class 4 neurons in the C‐laminae and for flat neurons in MIN. The correlation between neuronal function and morphology is discussed. It is concluded that, in addition to strong input with y‐characteristics, area 18 receives significant inputs with non‐y properties. latter inputs arise mainly from the laminae of the LGBd and from extra‐geniculate nuclei, but also may be seen to originate from MIN and the A‐laminae of the LGBd.

Question classification is an important phase in question answering systems. In this paper, we propose to apply i) hierarchical classifiers, ii) hierarchical classifiers in combination with semi-supervised learning and iii) hierarchy expansion for question classification for improving the precision. When the number of classes is large, the performance of classification algorithms may be affected. In order to improve the performance by reducing the number of classes for each classifier, we propose to use hierarchical classifiers according to the question taxonomy, in which each internal node is attached a classifier. We try to use semi-supervised learning to consume unlabeled questions with expectation to improve the performance of classifiers in the hierarchy. We explored different applications of learning methods in for each classifier of the hierarchy: a) supervised learning for all classifiers at all levels; b) semi-supervised learning for the first-level classifier and supervised learning for other classifiers; c) semi-supervised learning for all classifiers. The experiments show that the first method (a) has better results than those of flat classification; the second method (b) produces better results than those of the first method while the effort to increase the performance of fine classifiers in the last method (c) is not so successful. As another effort, we propose to automatically group question classes by clustering in order to expand a node which has a large number of classes in the question taxonomy. The experiment also shows that the overall precision is improved.

Classification is one of the widely used techniques to quantify and mine the rich information present in hyperspectral imagery. However, the realization of trustworthy classification still continues to be a challenging task. This is due to the presence of various uncertainties, such as incomplete a priori knowledge on the actual number of classes and noise. Especially, mismatching between the number of spectral classes and the number of information classes leads to substantial omission or commission errors in the classification. In this letter, we present a new multiclass classification framework, named supervised cascaded classifier system (SC <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> S), that addresses the abovementioned problem by providing reliable results. The SC <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> S method is a two-stage cascaded classification procedure that involves quantifying the uncertainty and then classifying the samples. In the first stage, pixels for which no reliable training samples can be found in the training stage are detected. In the second stage, pixels that are matched with the respective training distribution are classified using a supervised learning algorithm, otherwise labeled as unknown. The proposed SC <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> S framework has been implemented on eight different classification scenarios with a varying number of unknown classes (UCs) using hyperspectral and multispectral imageries. The performance of the proposed SC <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> S method is compared with other widely used classifiers with and without reject-option. The experimental results indicate that our method offers superior classification results even in the case of data sets with a large number of unknown spectral classes.

Fine-Grained Visual Categorization (FGVC) is challenging due to the large intra-class and small inter-class variance, and classes which are prone to be confused with one or more similar classes are called as confusing classes. Hierarchical visual data structures are widely used for image classification with a large number of classes so that the sophisticated classification problem can be processed from coarse to fine. However, hierarchical structures are accompanied with error propagation. In order to reduce the error propagation caused by the hierarchical structure, we propose the concept of minimal confusion set and its metrics. Minimal confusion set is the minimal set of classes that are highly confused with other classes in the set and much less confused with classes outside the set. Based on minimal confusion sets, a flat two-layer hierarchical structure can be formed, which reduces the error propagation. An effective mining method of minimal confusion set is also proposed, which can also be used for hierarchical learning. The mining method of minimal confusion set is based on confusion matrix, but it is different from the traditional methods using the confusion matrix obtained from test data. This method is independent on test data, and experiments on multiple datasets demonstrate the effectiveness of the method.

This paper proposes a growable switch architecture with multiple modules comprising a CORE module to support highspeed switching and EDGE modules with large buffers, providing a large number of traffic classes. For open-loop traffic such as CBR and VBR, the proposed switch uses a weighted fair queueing scheduler at each EDGE buffer module based on the equivalent bandwidth allocated by the call admission control (CAC). On the other hand, for best effort class services (e.g., ABR and UBR), closed-loop control using adaptive rate control at the actual source and at the virtual source queue of the input EDGE module is proposed to avoid internal congestion and to achieve fair throughput performance among the flows competing on the same link. Simulation results show that the proposed architecture achieves ATM switches having hundreds of Gbps capacity, while providing a large number of QoS classes with high throughput and fair sharing of bandwidth by all flows.

This paper presents a constructive method for deriving an updated discriminant eigenspace for classification when bursts of data that contains new classes is being added to an initial discriminant eigenspace in the form of random chunks. Basically, we propose an incremental linear discriminant analysis (ILDA) in its two forms: a sequential ILDA and a Chunk ILDA. In experiments, we have tested ILDA using datasets with a small number of classes and small-dimensional features, as well as datasets with a large number of classes and large-dimensional features. We have compared the proposed ILDA against the traditional batch LDA in terms of discriminability, execution time and memory usage with the increasing volume of data addition. The results show that the proposed ILDA can effectively evolve a discriminant eigenspace over a fast and large data stream, and extract features with superior discriminability in classification, when compared with other methods.

Machine learning based algorithms, such as a decision tree (DT) classifier, have been applied to automated process monitoring and fault identification in manufacturing processes, however the current DT-based process control models employ a single DT classifier for both mean shift detection and fault identification. As many manufacturing processes use automated data collection for multiple process parameters, a DT classifier would have to handle a large number of classes. Previous research shows that a large number of classes can degrade the accuracy of a DT multiclass classifier. In this study we propose a new process monitoring model using multiple DT classifiers with each handling a small number of classes. Moreover, we not only detect mean shifts but also identify process variability levels that may cause out-of-control signals. Experimental results show that our proposed model achieves satisfactory performance in process monitoring and fault identification with various parameter settings. It achieves better ARL performance compared with the baseline method based on a single DT classifier.

We show that there exist infinitely many quartic number fields K with large class numbers such that K∕Q is a Galois extension whose Galois group is isomorphic to a given finite group. Cho and Kim proved that there are infinitely many totally real cyclic extensions over Q of degree 4 with large class numbers. We consider all the other cases of quartic Galois extensions.

The aim of this study was to explore the characteristic of structure; species composition and species diversity in Sekelemariam State forest to enhance the forest’s plant biodiversity conservation and management practices through minimize the illegal deforestation practices by the local communities. The floristic composition and relative dominance of trees were studied in 66 (10m x 20 m) sample plots. A systematic sampling of plot of (10 m x 20 m) in each site was done to take vegetation samples. The data of tree individuals have served to give insight into the stand density, basal area, and frequency number of DBH class ranges. There were a large number of DBH class ranges but there were low DBH values. The species composition of Sekelemariam State forest is low rich and diversity with moderate density. The dominant species of trees were Croton macrostachys, Cupressus lusitanica Mil and Albizzia schimperiana, respectively. The maximum and minimum IVI values of trees were 34.97 and 0.66 of Croton macrostachys and Terminalia schimperiana , respectively. The density of vegetation in study area increases with increasing of DBH and height classes; this implies that the predominance of plantation tree individuals as the local community had been logging large sized natural tree species. The DBH size class distribution of trees in Sekelemariam State forest is shown to be on L-shape curve, which is high abundance of small trees. Keywords: Species diversity, Species richness, DBH, Diversity Indices. DOI : 10.7176/JBAH/9-24-02 Publication date: December 31 st 2019

Networks-on-chip (NoCs) were developed to meet the communication requirements of large-scale systems. The majority of current NoCs spend considerable area and power for router buffers. In our past work, we have developed elastic buffer (EB) flow control which adds simple control logic in the channels to use pipeline flip-flops (FFs) as EBs with two storage locations. This way, channels act as distributed FIFOs and input buffers are no longer required. Removing buffers and virtual channels (VCs) significantly simplifies router design. Compared to VC networks with highly-efficient custom SRAM buffers, EB networks provide an up to 45 percent shorter cycle time, 16 percent more throughput per unit power, or 22 percent more throughput per unit area. EB networks provide traffic classes using duplicate physical subnetworks. However, this approach negates the cost gains or becomes infeasible for a large number of traffic classes. Therefore, in this paper we propose a hybrid EB-VC router which provides an arbitrary number of traffic classes by using an input buffer to drain flits facing severe contention or deadlock. Thus, hybrid routers operate as EB routers in the common case, and as VC routers when necessary. For this reason, the hybrid EB-VC scheme offers 21 percent more throughput per unit power than VC networks and 12 percent than EB networks.