• Home
  • Search
  • Evaluation of jetting insertion for the self-boring pressuremeter
  • Cite Icon4
  • https://doi.org/10.1139/t95-003Copy DOI Icon

Evaluation of jetting insertion for the self-boring pressuremeter

Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

The primary objectives of the self-boring pressuremeter (SPBM) test are to measure, in situ, the horizontal stress and the stress–strain characteristics of soils and soft rocks. This cylindrical probe tunnels itself into the ground with a minimum disturbance. Conventionally, the advance has been performed using a cutter system housed inside a cutting shoe. Although proven effective, this method is slow and cumbersome. In response to these drawbacks, a jetting insertion method was introduced and designed to allow a faster rate of insertion using a system that is less equipment intensive and easily adapted to conventional drill rigs. To avoid similar potential inconsistencies encountered in earlier SBPM testing with the cutting method, a series of laboratory simulation tests and in situ self-boring pressuremeter tests were carried out in two soft clay deposits to assess the jetting method. The following key insertion parameters were studied: jetting nozzle type, drilling fluid velocity, jetting nozzle position, rate of advance, and jetting flushing system. The results of this study indicate that, as with the cutting method, the jetting method can be used in soft to medium clays to advance the self-boring pressuremeter with minimum disturbance. Key words : self-boring pressuremeter, soft clay, horizontal stress, jetting, cutting.

Similar Papers
  • Research Article
  • Citations6

PRESSUREMETER TESTING IN GROUND INVESTIGATION. PART II - INTERPRETATION.

  • Jan 01, 1997
  • Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
  • B G Clarke
  • Research Article
  • Citations36

Self-Boring Pressuremeter Study of San Francisco Bay Mud

  • Jan 01, 1980
  • Journal of the Geotechnical Engineering Division
  • G Wayne Clough +1
  • Research Article
  • Citations1

Consolidation characteristics of clays from self-boring pressuremeter tests

  • Jan 01, 1990
  • Geological Society, London, Engineering Geology Special Publications
  • B G Clarke
  • Research Article
  • Citations1

Stiffness parameters from cone pressuremeter tests at Changi East, Singapore

  • Oct 10, 2019
  • Proceedings of the Institution of Civil Engineers - Ground Improvement
  • Kyaw Win Soe Moe +4
  • Research Article
  • Citations23

Effects of Disturbance on Undrained Strengths Interpreted from Pressuremeter Tests

  • Dec 01, 2000
  • Journal of Geotechnical and Geoenvironmental Engineering
  • Charles P Aubeny +2
  • Research Article
  • Citations17

A Clay Calibration Chamber for Testing Field Devices

  • Dec 01, 1991
  • Geotechnical Testing Journal
  • Wf Anderson +2
  • Research Article
  • Citations3

Effect of flow rules and elastic strains on pressuremeter test results in dense sand

  • Feb 01, 2009
  • Canadian Geotechnical Journal
  • Vincenzo Silvestri +2
  • Research Article
  • Citations3

Geostatic stress in oil-sand tailings

  • Dec 03, 2021
  • Proceedings of the Institution of Civil Engineers - Geotechnical Engineering
  • Dawn Shuttle +2
  • Abstract
  • Citations4

A comparison of the results of special pressuremeter tests with conventional tests on a deposit of soft clay at Canvey Island : HUGHES, JM, UNIV. AUCKLAND, NZ WROTH, CP, UNIV. CAMBRIDGE, GB PENDER, MJ, MINIST. WKS AND DEVELOP. NZ 6F, 7R. 2ND AUS-N. Z. CONF. GEOMECH, BRISBANE, 1975, INST. ENGRS, AUS. NAT. CONF. PUBL. NO. 75/4, P292–296

  • Jun 01, 1976
  • International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts
  • J M O Hughes +2
  • Abstract

Self-boring pressuremeter tests in soft clay : Benoit, J; Clough, G W J Geotech Engng Div ASCEV112, N1, Jan 1986, P60–P78

  • Aug 01, 1986
  • International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts
  • Conference Article
  • Citations5

Three Years' Experience With the Offshore Self-Boring Pressuremeter "PAM"

  • May 07, 1984
  • F Brucy +2
  • Research Article
  • Citations3

Alternate Analysis of Pressuremeter Test

  • Dec 01, 1989
  • Journal of Geotechnical Engineering
  • Sayed M Sayed
  • Abstract

Determination of horizontal geostatic stress in clay with self-bored pressuremeter : Jefferies, MG Can Geotech JV25, N3, Aug 1988, P559–573

  • Mar 01, 1989
  • International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts
  • Research Article
  • Citations4

Determination of horizontal geostatic stress in clay with self-bored pressuremeter: Reply

  • Nov 01, 1989
  • Canadian Geotechnical Journal
  • M G Jefferies
  • Research Article
  • Citations6

Estimating Moduli and Friction Angle from Self-Boring Pressuremeter Tests in Sand

  • Jan 01, 2005
  • Soils and Foundations
  • Ramesh C Gupta
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.