Evaluation of target segmentation on SAR target recognition

In order to improve synthetic aperture radar (SAR) target recognition performance, this paper proposes a novel method using multi-level deep features. The multi-level deep features are learned by the convolutional neural network (CNN), which are capable of describing the target characteristics from different aspects. In order to make full use of the discrimination contained in the multi-level deep features, the joint sparse representation (JSR) is used as the basic classifier, which performs the multi-task learning to jointly classify the multi-level deep features. It could not only represent each feature properly but also consider the correlations between different levels of features. Based on the solutions from JSR, the target label is classified as the training class with the minimum reconstruction error. By fully exploiting the discriminative information contained in the multi-level deep features, the proposed method could effectively enhance SAR target recognition performance. The moving and stationary target acquisition and recognition (MSTAR) dataset is employed in the experiments. The results show that the proposed method could achieve a significantly high recognition rate of 99.38% for classifying 10 classes of targets under the standard operating condition (SOC), which is higher than those from some reference methods drawn from current literatures. Under different types of extended operating conditions (EOCs), the overall performance of the proposed method keeps superior over the reference methods. In addition, the outlier rejection capability of the proposed method is also better than the compared methods. All these experimental results validate the high effectiveness of the proposed method.

Synthetic aperture radar (SAR) target recognition under extended operating conditions (EOCs) is a challenging problem due to the complex application environment, especially for insufficient target variations and corrupted SAR images in the training samples. This paper proposes a new strategy to solve these problems for target recognition. The SAR images are firstly characterized by multi-scale components of monogenic signal. The generated monogenic features are decomposed to learn a class dictionary and a shared dictionary, which represent the possible intraclass variations information and the common information, respectively. Moreover, a sparse representation of the class dictionary and a dense representation of the shared dictionary are jointly employed to represent a query sample for classification. The validity of the proposed strategy is demonstrated with multiple comparative experiments on moving and stationary target acquisition and recognition (MSTAR) database.

This paper proposes an automatic target recognition (ATR) method for synthetic aperture radar (SAR) images based on information-decoupled representation. A typical SAR image of a ground target can be divided into three parts: target region, shadow and background. From the aspect of SAR target recognition, the target region and shadow contain discriminative information. However, they also include some confusing information because of the similarities of different targets. The background mainly contains redundant information, which has little contribution to the target recognition. Because the target segmentation may impair the discriminative information in the target region, the relatively simpler shadow segmentation is performed to separate the shadow region for information decoupling. Then, the information-decoupled representations are generated, i.e., the target image, shadow and original image. The background is retained in the target image, which represents the coupling of target backscattering and background. The original image and generated target image are classified using the sparse representation-based classification (SRC). Then, their classification results are combined by a score-level fusion for target recognition. The shadow image is not used because of its lower discriminability and possible segmentation errors. To evaluate the performance of the proposed method, extensive experiments are conducted on the Moving and Stationary Target Acquisition and Recognition (MSTAR) dataset under both standard operating condition (SOC) and various extended operating conditions (EOCs). The proposed method can correctly classify 10 classes of targets with the percentage of correct classification (PCC) of 94.88% under SOC. With the PCCs of 93.15% and 75.03% under configuration variance and 45° depression angle, respectively, the superiority of the proposed is demonstrated in comparison with other methods. The robustness of the proposed method to both uniform and nonuniform shadow segmentation errors is validated with the PCCs over 93%. Moreover, with the maximum average precision of 0.9580, the proposed method is more effective than the reference methods on outlier rejection.

Combination of global and local filters for robust SAR target recognition under various extended operating conditions

The synthetic aperture radar (SAR) image preprocessing techniques and their impact on target recognition performance are researched. The performance of SAR target recognition is improved by composing a variety of preprocessing techniques. The preprocessing techniques achieve the effects of suppressing background redundancy and enhancing target characteristics by processing the size and gray distribution of the original SAR image, thereby improving the subsequent target recognition performance. In this study, image cropping, target segmentation, and image enhancement algorithms are used to preprocess the original SAR image, and the target recognition performance is effectively improved by combining the above three preprocessing techniques. On the basis of image enhancement, the monogenic signal is used for feature extraction and then the sparse representation-based classification (SRC) is used to complete the decision. The experiments are conveyed on the moving and stationary target acquisition and recognition (MSTAR) dataset, and the results prove that the combination of multiple preprocessing techniques can effectively improve the SAR target recognition performance.

Deep learning algorithms have found extensive utility in Automatic Target Recognition (ATR) using Synthetic Aperture Radar (SAR). Despite this, conventional deep learning-based ATR models often lack in their performance when subjected to Extended Operating Conditions (EOCs). Significant variations in depression, noise interference, limited training data, and partial occlusion are primary factors in EOCs. In this paper, we proposed a deep neural network-based technique to recognize SAR targets for Standard Operating Conditions (SOC) and Extended Operating Conditions (EOC). The proposed approach comprises an encoder and decoder network. The encoder network integrates multiple dilated convolutions to address noise-induced recognition challenges for extracting multi-scale features. Furthermore, a feature refinement module is integrated within the multi-scale channels to enhance the extraction of discriminative and resilient features. Feature refinement selectively emphasizes informative features while suppressing irrelevant ones. Additionally, a salient attention block and a spatial feature learning module are introduced for feature selection. Selected features are then utilized in the top-level network layer of the encoder network to preserve spatial relationships among diverse features. This spatial feature learning module aids in recognition performance, particularly when training data is scarce. The decoder network consists of stacked transposed convolution layers, facilitating the encoder network's acquisition of discriminative image features. Experimental evaluations were conducted on the Moving and Stationary Target Acquisition and Recognition (MSTAR) dataset to validate the efficacy of the proposed methodology.

Cross-task and cross-domain SAR target recognition: A meta-transfer learning approach

Automatic target recognition (ATR) of synthetic aperture radar (SAR) images is performed on either global or local features. The global features can be extracted and classified with high efficiency. However, they lack the reasoning capability thus can hardly work well under the extended operation conditions (EOCs). The local features are often more difficult to extract and classify but they provide reasoning capability for EOC target recognition. To combine the efficiency and robustness in an ATR system, a hierarchical fusion of the global and local features is proposed for SAR ATR in this paper. As the global features, the random projection features can be efficiently extracted and effectively classified by sparse representation-based classification (SRC). The physically relevant local descriptors, i.e., attributed scattering centers (ASCs), are employed for local reasoning to handle various EOCs like noise corruption, resolution variance, and partial occlusion. A one-to-one correspondence between the test and template ASC sets is built by the Hungarian algorithm. Then, the local reasoning is performed by evaluating individual matched pairs as well as the false alarms and missing alarms. For the test image to be recognized, it is first classified by the global classifier, i.e., SRC. Once a reliable decision is made, the whole recognition process terminates. When the decision is not reliable enough, it is passed to the local classifier, where a further classification by ASC matching is carried out. Therefore, by the hierarchical fusion strategy, the efficiency of global features and the robustness of local descriptors to various EOCs can be maintained jointly in the ATR system. Extensive experiments on the moving and stationary target acquisition and recognition data set demonstrate that the proposed method achieves superior effectiveness and robustness under both SOC and typical EOCs, i.e., noise corruption, resolution variance, and partial occlusion, compared with some other SAR ATR methods.

Images from different aspect views for one target, known as multiple views, are widely applied to improve synthetic aperture radar (SAR) target recognition. However, most of existing multi-view methods have strict constraint on the angle interval among multiple views. In this paper, a new multiview fusion method free from interval limitation using expectation maximization (EM) is explored for SAR image classification. Firstly, we apply convolutional neural network (CNN) to extract features effectively owning to its powerful ability of feature learning and then obtain the classification probability. Secondly, Multi-view Label Set (MLS) is automatically constructed from multiple views according to the probability and finally we use EM algorithm to classify SAR images intelligently. It is worth noting that the proposed method can be used flexibly according to the number of perspectives obtained and without angle interval constraint among multiple views. Experiments demonstrate that the proposed method has better recognition performance than some state-of-the-art methods on the Moving and Stationary Target Acquisition and Recognition (MSTAR) dataset.

Feature extraction is a crucial step for any automatic target recognition process, especially in the interpretation of synthetic aperture radar (SAR) imagery. In order to obtain distinctive features, this paper proposes a feature fusion algorithm for SAR target recognition based on a stacked autoencoder (SAE). The detailed procedure presented in this paper can be summarized as follows: firstly, 23 baseline features and Three-Patch Local Binary Pattern (TPLBP) features are extracted. These features can describe the global and local aspects of the image with less redundancy and more complementarity, providing richer information for feature fusion. Secondly, an effective feature fusion network is designed. Baseline and TPLBP features are cascaded and fed into a SAE. Then, with an unsupervised learning algorithm, the SAE is pre-trained by greedy layer-wise training method. Capable of feature expression, SAE makes the fused features more distinguishable. Finally, the model is fine-tuned by a softmax classifier and applied to the classification of targets. 10-class SAR targets based on Moving and Stationary Target Acquisition and Recognition (MSTAR) dataset got a classification accuracy up to 95.43%, which verifies the effectiveness of the presented algorithm.

To solve the problem of low recognition rate of synthetic aperture radar (SAR) target based on feature recognition, a target recognition method of SAR image based on multi-feature fusion is proposed, which combines Hu moment, Harris corner point and Gabor feature. The three kinds of features describe the target's geometric shape feature, corner feature and image texture feature respectively, which can improve the accuracy of SAR target recognition from the aspect of feature extraction. Based on the MSTAR data set, the experiment is carried out under standard and extended operating conditions. The results show that the proposed method can effectively overcome the deficiency of insufficient single feature description information and improve the SAR target recognition rate to a certain extent.

This paper proposes a method using joint classification of monogenic components with discrimination analysis for target recognition in synthetic aperture radar (SAR) images. Three monogenic components, namely, phase, amplitude, and orientation, are extracted from the original image and classified by joint sparse representation for target recognition. Considering that the three components may have different discrimination capabilities for different operating conditions, the discrimination analysis is incorporated into the classification scheme. The components with low discriminability are not used in the joint classification. Afterwards, those discriminative components for a certain condition are classified to determine the target type. Experiments are conducted on the moving and stationary target acquisition and recognition (MSTAR) to evaluate the performance of the proposed method.

In the field of synthetic aperture radar (SAR) automatic target recognition (ATR), deep learning-driven methods perform well when numerous training samples are available. However, in practical SAR application scenarios, the number of available training samples is often scarce due to the limitation of observation conditions, which leads to major challenges for deep learning-driven methods in real-world deployment. Currently, the problem of ATR with only a few training samples has attracted much attention in the SAR field. In this article, we put forward an ATR method called azimuth-guided feature embedding network with dual inference mechanism (AGFEN-DIM) to achieve fewshot SAR target recognition. To be specific, the feature extraction model, i.e. azimuth-guided feature embedding network (AGFEN) is composed of the azimuth embedding module (AEM) and the dynamic feature embedding module (DFEN). Among them, AEM resorts to a set of azimuth-parameterized convolution kernels, aiming to make full use of information relevant to the current radar imaging environment. The proposed DFEN is capable of dynamically extracting the discriminative features of the target according to the input image under the guidance of azimuth-parameterized convolutional kernels. The dual inference mechanism (DIM) effectively integrates the inference results of improved prototype classification and label propagation strategy to boost the reliability and robustness of the recognition model for few-shot SAR target recognition tasks. Extensive experiments on the moving and stationary target acquisition and recognition (MSTAR) dataset demonstrate that the proposed AGFEN-DIM surpasses many state-of-the-art SAR ATR methods in various application scenarios.

The extraction of a valuable set of features and the design of a discriminative classifier are crucial for target recognition in SAR image. Although various features and classifiers have been proposed over the years, target recognition under extended operating conditions (EOCs) is still a challenging problem, e.g., target with configuration variation, different capture orientations, and articulation. To address these problems, this paper presents a new strategy for target recognition. We first propose a low-dimensional representation model via incorporating multi-manifold regularization term into the low-rank matrix factorization framework. Two rules, pairwise similarity and local linearity, are employed for constructing multiple manifold regularization. By alternately optimizing the matrix factorization and manifold selection, the feature representation model can not only acquire the optimal low-rank approximation of original samples, but also capture the intrinsic manifold structure information. Then, to take full advantage of the local structure property of features and further improve the discriminative ability, local sparse representation is proposed for classification. Finally, extensive experiments on moving and stationary target acquisition and recognition (MSTAR) database demonstrate the effectiveness of the proposed strategy, including target recognition under EOCs, as well as the capability of small training size.

Synthetic Aperture Radar (SAR) images are prone to be contaminated by noise, which makes it very difficult to perform target recognition in SAR images. Inspired by great success of very deep convolutional neural networks (CNNs), this paper proposes a robust feature extraction method for SAR image target classification by adaptively fusing effective features from different CNN layers. First, YOLOv4 network is fine-tuned to detect the targets from the respective MF SAR target images. Second, a very deep CNN is trained from scratch on the moving and stationary target acquisition and recognition (MSTAR) database by using small filters throughout the whole net to reduce the speckle noise. Besides, using small-size convolution filters decreases the number of parameters in each layer and, therefore, reduces computation cost as the CNN goes deeper. The resulting CNN model is capable of extracting very deep features from the target images without performing any noise filtering or pre-processing techniques. Third, our approach proposes to use the multi-canonical correlation analysis (MCCA) to adaptively learn CNN features from different layers such that the resulting representations are highly linearly correlated and therefore can achieve better classification accuracy even if a simple linear support vector machine is used. Experimental results on the MSTAR dataset demonstrate that the proposed method outperforms the state-of-the-art methods.