- Single Book
459
- 10.1002/9781119470007
Experiments
- Jan 09, 2021
- C F Jeff Wu + 1 more +1
This book on experimental design is somewhat similar in flavor to the classic book by G.E
Experimental Design and Process Optimization delves deep into the design of experiments (DOE). The book includes Central Composite Rotational Design (CCRD), fractional factorial, and Plackett and Burman designs as a means to solve challenges in research and development as well as a tool for the improvement of the processes already implemented. Appr
Experiments
This book on experimental design is somewhat similar in flavor to the classic book by G.E
Experimental designs for solid-phase microextraction method development in bioanalysis: A review
Experimental designs for solid-phase microextraction method development in bioanalysis: A review
Evaluation and improvement of promising rubber recycling OT machine using fractional factorial and response surface design
A design of experiment (DOE) is used in many industrial sectors in the development and optimization of manufacturing processes. DOE is a more effective way to determine the impact of two or more factors on a response. In this paper, a Two-Level Fractional Factorial design was employed to develop the important factors that significantly affect new promising OT Rubber recycling machine using a DOEs analysis. Central composite design (CCD) and response surface methodology (RSM) were used to optimize the isolating screen size. The CCD considered five factors with two-level full factorial design. CCD experiments using RSM was proved to be an optimal tool for optimization.
Read moreExtraction and Determination of Sildenafil Citrate by Spectrophotometry: Classical Versus Factorial Design Optimization
In this work, the complexation and extraction processes of sildenafil citrate (SC) were evaluated by using classical optimization versus factorial design methodology. The selected factors were based on the reaction of sildenafil with methyl orange (MO) as a chromogenic reagent via the formation of ion-association complex in acidic buffer media, followed by extraction with chloroform and quantitatively measured by visible spectrophotometry at λmax of 427 nm. The optimization step was first carried out by classical one-factor-at-a-time (OFAT) from which the extracted results were exploited in the experimental design optimization by using 24-1 fractional factorial and 32 full factorial designs for the chosen variables such as pH, concentration of reagent, reaction time, extraction time and temperature. Results obtained from fractional factorial design 24-1 showed that only the variables pH, MO concentration and their interaction based on analysis of variance (ANOVA) in term of Pareto chart, were statistically significant at 95% confidence level. Under the optimized conditions, the assay method of SC was validated in term of the analytical figures of merit. SC can be determined in concentration range of 0.5-40 µg mL-1 with correlation coefficient of 0.9991, detection limit (S/N) of 0.15 µg mL-1, RSD (n=10) of 1.43%, accuracy as %Erel of -2.23% and mean percent recovery of 97.77±0.87. The proposed method was applied for the determination of SC in commercial medicaments without fear from excipients interferences with the assay procedure.
Read moreOptimization of copper cementation process by iron using central composite design experiments
Optimization of copper cementation process by iron using central composite design experiments
Biosurfactant-Producing Bacteria Isolated from a Microbial Consortium Previously Subjected to Adaptive Laboratory Evolution in Oily Sludge.
Microbial bioprospecting in contaminated environments is a promising strategy for identifying biosurfactant-producing bacteria; however, translating environmentally adapted strains into predictable cultivation processes remains challenging. In this study, a microbial consortium subjected to long-term evolutionary laboratory adaptation in oily sludge was investigated to evaluate strain-specific phenotypic responses related to biosurfactant production. Phylogenetic analysis based on 16S rDNA sequencing identified three taxonomically distant isolates: Faucicola sp. strain BS5C, Pseudomonas sp. strain BS16B, and Enterobacter sp. BS14MR. Biosurfactant production was evaluated using a sequential Design of Experiments (DOE) approach, including fractional factorial and central composite rotatable designs, with the emulsification index (E24) used as a semi-quantitative response variable. Initial screening revealed a statistically significant negative effect (p < 0.10) of high dextrose concentrations for all isolates. Strain-specific differences in model adequacy were observed, with a statistically adequate quadratic model obtained for Pseudomonas sp. BS16B (R2 = 0.8658, p = 0.0225), whereas the other isolates showed significant lack of fit (p < 0.05). ATR-FTIR analysis revealed spectral profiles consistent with lipopeptide-like compounds. Overall, these results indicate that isolates derived from the same long-term adapted system may differ substantially in process predictability, suggesting that productivity-based screening alone may be insufficient for selecting robust strains.
Read moreOptimization of SERS scattering by Ag-NPs-coated filter paper for quantification of nicotinamide in a cosmetic formulation
Optimization of SERS scattering by Ag-NPs-coated filter paper for quantification of nicotinamide in a cosmetic formulation
Read moreOptEx: An integrated framework for experimental design and combustion kinetic model optimization
OptEx: An integrated framework for experimental design and combustion kinetic model optimization
Investigation of the effects of bovine collagen peptides and mixed berries on rheological properties and biological activity of egg white-based beverage via central composite design.
Modern consumer expectations have become highly diversified: they want more opportunities to meet diverse family needs (diversity of family members in age, gender, physical activity, etc. ,) and individual health goals with a huge variety of sensorial preferences. Our research is aimed to develop a protein-dense, highly bioactive, lactose- and whey protein-free beverage applying a central composite rotational design (CCRD) with 2 factors. For this purpose, an egg white-based beverage was flavored with mixed berries (factor A) and enriched with bovine collagen peptides (factor B). After suitable sample preparation, the rheological properties were investigated by an Anton Paar MCR 92 rheometer (with CC 27 system, and flow behavior was analyzed with a Herschel-Bulkley (H-B) model). The antioxidant capacity of samples was investigated by Ferric Reducing Antioxidant Power (FRAP) method, the total anthocyanin content was estimated based on a spectrophotometric method, and the total phenolic content was determined by the Folin Ciocalteu method. Our results are figured on response surfaces demonstrating that both factors and their interactions show a positive correlation with the examined parameters. Based on the CCRD, all investigated parameters are significantly influenced by at least one aspect and can be adequately estimated for further product development.
Read moreOptimization of the extraction process of polyphenols from cashew apple agro-industrial residues
The goal of this study was to determine the chemical composition of cashew apples agro-industrial residue and optimize the process of polyphenols extraction in this residue. The extraction process conditions were defined using a 24-1 fractional factorial experimental design using acetone and methanol as solvents. The independent variables were: time (30 to 90 min), temperature (30 to 50 °C), solvent concentrations (50% to 90%), agitation speed (100 to 300 rpm); the dependent variables were: total phenolic content and DPPH scavenging capacity. The optimized process was carried out by applying the Central Composite Rotational Design (CCRD) considering the results obtained with the 24-1 fractional factorial experimental design. The residue presented bioactive compounds in its composition, with emphasis on the content of total phenolic compounds (1975.64 mg/ 100 g). The extraction process was not affected by methanol; however, acetone affected the amounts of extracted phytochemicals. Extracts with high levels of polyphenols and strong DPPH scavenging capacity (> 80%) were obtained using 55% acetone, 30 minutes, 30 °C, and 150 rpm. The results showed that cashew apple residue is a potential natural source of bioactive compounds with strong antioxidant capacity. These compounds could be used partially or totally to replace synthetic antioxidants.
Read moreThe machinability and tribological characteristics of aluminum alloys with improved elevated temperature properties using rapidly solidified powder
The machinability and tribological characteristics of aluminum alloys with improved elevated temperature properties using rapidly solidified powder
Read moreProduction of fish protein hydrolisates from Oreochromis niloticus fillet trimmings
Process optimization is essential for the large-scale viability of the food industry. Central composite rotational design (CCRD) followed by response surface analysis was used to optimize the production of fish protein hydrolysate (FHP). FHP was obtained from tilapia filet trimmings hydrolyzed subjected using Alcalase 2.4L™, Neutrase™, and Novo-Pro™ D enzymes under temperature, enzyme concentration, and pH-controlled conditions. A 23-3 full factorial design (FFD) was initially employed to select the most influential variables in the process (with each enzyme used in the CCRD). From the FFD, temperature and enzyme concentration for Alcalase 2.4L™ and Novo-Pro™ D, and temperature and pH for Neutrase™ were selected. The estimated maximum degree of hydrolysis (DHmax) using Alcalase 2.4L™ was 60.05% during 180 min of processing at 39.03°C and 0.65% enzyme concentration. A DHmax of 56.96% was reached using Neutrase™ during 120 min at 39.46°C and 6.039 pH. Novo-Pro™ D was associated with a DHmax of 54.76% during 60 min at 47.95°C and 0.866% enzyme concentration. The three enzymes showed promising results for obtaining FHP with high DH from Nile tilapia filet trimmings.
Read moreFlotation response of coal washery reject fines: Characteristics, process optimization, and oxidation
The present paper outlines the characterization, electrokinetic behaviour, and flotation response of rejected coking coal fines with 32.5% ash generated in a coal washery in Eastern India. The response methodology and central composite rotatable design (RSM‐CCRD) were used for the process modelling and optimization of the flotation process using diesel, methyl isobutyl carbinol (MIBC), and sodium hexametaphosphate as a collector, frother, and depressant to maximize ash reduction, yield, and combustible recovery. At optimum condition, a 9.7% clean ash coal was achieved with a 63% yield at collector, frother, and depressant dosages of 0.78, 0.31, and 0.80 kg/ton, respectively. The model prediction and experimental data corroborated sufficiently. Subsequently, within 1 year, the fines oxidized and did not float with the collector. Fourier‐transform infrared spectroscopy (FTIR) confirmed surface oxidation on oxidized coal. The oxidized coal responded favourably to acid oil, a vegetable oil refinery waste. With acid oil as a collector, the oxidized coal can upgrade to 12% clean ash coal with a 60% yield; the combustible recovered is 80%. The work indicates successful upgradation of fresh and oxidized coal using the froth flotation process.
Read moreEnhanced butanol production using Clostridium beijerinckii SE-2 from the waste of corn processing
Enhanced butanol production using Clostridium beijerinckii SE-2 from the waste of corn processing
Cross-Entropy Loss for Recommending Efficient Fold-Over Technique
Due to the limited resources and budgets in many real-life projects, it is unaffordable to use full factorial experimental designs and thus fractional factorial (FF) designs are used instead. The aliasing of factorial effects is the price we pay for using FF designs and thus some significant effects cannot be estimated. Therefore, some additional observations (runs) are needed to break the linages among the factorial effects. Folding over the initial FF designs is one of the significant approaches for selecting the additional runs. This paper gives an in-depth look at fold-over techniques via the following four significant contributions. The first contribution is on discussing the adjusted switching levels fold-over technique to overcome the limitation of the classical one. The second contribution is on presenting a comparison study among the widely used fold-over techniques to help experimenters to recommend a suitable fold-over technique for their experiments by answering the following two fundamental questions: Do these techniques dramatically lessen the confounding of the initial designs, and do the resulting combined designs (combining initial design with its fold-over) via these techniques have considerable difference from the optimality point of view considering the markedly different searching domains in each technique? The optimality criteria are the aberration, confounding, Hamming distance and uniformity. Many of these criteria are given in sequences (patterns) form, which are inconvenient and costly to represent and compare, especially when the designs have many factors. The third innovation is on developing a new criterion (dictionary cross-entropy loss) to simplify the existing criteria from sequence to scalar. The new criterion leads to a more straightforward and easy comparison study. The final contribution is on establishing a general framework for the connections between initial designs and combined designs based on any fold-over technique.
Read more