• Home
  • Search
  • Experimental Investigation on the Pipe Leakage
  • https://doi.org/10.1115/icone25-67251Copy DOI Icon

Experimental Investigation on the Pipe Leakage

  • Jul 2, 2017
  • Benan Cai +4 more
Show More
  • Abstract
  • Literature Map
  • Similar Papers
Abstract

Pipelines are widely used in many fields including power industry, petroleum system etc. Pipelines such as the surge line and main pipe are easily subjected to thermal stratification as a result of the non-uniform temperature distribution in the nuclear power plants. Furthermore, pipelines can suffer from thermal fatigue in virtue of long-term uneven stress distribution. When the surge line or main pipe subjected to thermal stratification and thermal fatigue keeps operating for long time, the pipe leakage may happen because of the existence of pipeline crack. The thermal pipeline crack leakage mainly appears in the region with stress concentration. As the pipe system is always covered with thermal insulation layer in the actual nuclear power plants, it is hard for workers to observe pipeline leak, which can have a bad effect on the normal operation. Since the temperature and humidity close to the pipe crack due to leakage can change compared to the normal operation, we can infer from the temperature and humidity changes that the pipe leakage occurs. Based on this idea, the temperature and humidity near the crack of the pipe need to be measured to detect the leakage fields. As the fluids with high pressure and high temperature flow in the pipe system in an actual nuclear power plant, the pipe leakage experiment was performed in the high pressure and high temperature condition. When the fluids with high temperature and pressure leak in the crack, the water will evaporate quickly, which means this process belongs to spray flash evaporation process. The temperature and humidity variations were monitored in the experiment with temperature and humidity probes which have the advantage of responding to the change of temperature and humidity sensitively. The data collection program was mainly written based on the LABVIEW platform. The collecting time step was set 1s. As the measuring position and leakage flux are two key factors for the pipe leakage, the experiment was carried out with different measuring positions and leakage fluxes conditions. The experimental results showed that the leak flux had an important influence on the temperature and humidity near the pipe crack. The temperature and humidity started to change in a very short time with large leak flux. At the same time, the velocity of the temperature and humidity change was high with large leak flux. When the pipe leakage occurred in the location near the temperature and humidity probe, the temperature and humidity responded quickly and the velocity of temperature and humidity change was large. The experiment data can be used for the prediction of the pipe leakage in the nuclear power plants.

Similar Papers
  • Research Article
  • Citations83

European THERFAT project—thermal fatigue evaluation of piping system “Tee”-connections

  • Nov 06, 2004
  • Nuclear Engineering and Design
  • K.-J Metzner +1
  • Research Article
  • Citations10

Analysis of human performance differences between students and operators when using the Rancor Microworld simulator

  • Oct 14, 2022
  • Annals of Nuclear Energy
  • Jooyoung Park +4
  • Conference Article
  • Citations27

Water pipeline monitoring system using vibration sensor

  • Oct 01, 2014
  • M I M Ismail +2
  • Conference Article
  • Citations3

Seismic Fragility Evaluation of Interface Pipes in Seismically Isolated NPPs by Using Scale Model Test

  • Jul 19, 2015
  • Daegi Hahm +5
  • Research Article
  • Citations3

Structural mechanical and thermal hydraulic aspects on the behaviour of crack like leaks in piping

  • May 02, 2015
  • Progress in Nuclear Energy
  • J Sievers +3
  • Conference Article

Application of GIS in the General Layout of a Nuclear Power Plant

  • Jul 02, 2017
  • Peng Fu +1
  • Conference Article
  • Citations1

The Role of Displacement-Controlled Stresses in Critical Flaw Size Determination for Piping Systems

  • Jan 01, 2008
  • Peter C Riccardella +4
  • Research Article
  • Citations7

Enhanced elastic stress solutions for junctions in various pipe bends under internal pressure and combined loading ([formula omitted] pipe bend, U-bend, double-bend pipe)

  • Oct 14, 2024
  • International Journal of Pressure Vessels and Piping
  • Seok-Pyo Hong +4
  • Research Article

LINEAR AND NON-LINEAR ANALYSES OF PRESSURE PIPE ELBOWS

  • Sep 01, 2023
  • Journal of the Serbian Society for Computational Mechanics
  • Benouis Ali +3
  • Research Article
  • Citations2

Detecting Steam Leakage in Nuclear Power Systems Based on the Improved Background Subtraction Method

  • Jul 22, 2024
  • Processes
  • Jie Liu +6
  • Conference Article

Numerical Analysis of Thermal Stratification in Pressurizer Surge Line

  • Jan 01, 2010
  • Zhanfei Qi +1
  • PDF
  • Research Article
  • Citations1

A Special Thermal Fatigue Failure Mode of Pipe in Nuclear Power Plant and Its Countermeasures

  • Apr 01, 2021
  • Journal of Physics: Conference Series
  • Qin Yin +3
  • Conference Article
  • Citations1

Computational Fluid Dynamics Modeling of an Experimental Thermal-Stratification Flow Case Using ABAQUS/CFD

  • Jul 14, 2019
  • Daniel Franken +1
  • Conference Article

The Effect of OBE Elimination on Class 1 Piping Systems

  • Jan 01, 2010
  • Il Kwun Nam +2
  • Research Article

Identifying Hazardous Conditions for Rapid Compression Scenarios of Chemically Unstable Gases in Industrial Scaled Pipes

  • Apr 20, 2016
  • Chemical engineering transactions
  • Martin Kluge +3
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.