Explicit control of 2D and 3D structural complexity by discrete variable topology optimization method

Structural topology constraints in topology optimization are an important research topic. The structural topology is characterized by the topological invariance of the number of holes. The holes of a structure in 3D space can be classified as internally enclosed holes and external through-holes (or tunnels). The genus is the number of tunnels. This article proposes the quotient set design variable method (QSDV) to implement the inequality constraint on the maximum genus allowed in an optimized structure for 3D structural topology optimization. The principle of the QSDV is to classify the changing design variables according to the connectivity of the elements in a structure to obtain the quotient set and update the corresponding elements in the quotient set to meet the topological constraint. Based on the standard relaxation algorithm discrete variable topology optimization method (DVTOCRA), the effectiveness of the QSDV is illustrated in numerical examples of a 3D cantilever beam.

During the last 20 years, structural optimization has become one of the most important topics of engineering applications. Design optimization of structure has been an interesting area of research in the field of engineering design for its ability to short the design cycle and to enhance product quality. Significant research activity has occurred in the area of structural optimization in the last decade. Especially for topology optimization of structure, many new theoretical, algorithmic, and computational contributions have resulted by researchers and engineers. Topology optimization is a powerful tool for global and multi-scale design of macrostructures, microstructures, and the cell of prescribed composite materials. The population based evolutionary algorithms have emerged as powerful mechanism for finding optimum solutions of complex optimization problems in engineering during the last two decades. Evolutionary computation is the study of computational systems which use ideas and get inspiration from natural evolution and adaptation [1]. The thinking has wide application in various engineering fields, such as computer science, artificial intelligence, operations research. Genetic algorithm is another kind of bio-inspired optimization method and it is playing an increasingly important role in studies of complex adaptive systems. Its application ranges from adaptive agents in economic theory to the use of machine learning techniques in the design of complex devices and structures, such as aircraft turbines and integrated circuits [2]. Optimization of structures can be classified into three categories: sizing, shaping, and topology optimization. In the topology optimization, it is concerned with the structure members and connectivity between members. In general, it is easily represented by discrete variables rather than by those used for continuous optimization problems. Topology optimization is the most difficult and complex among three categories and it is special useful in developing innovative conceptual designs. Structural optimization, in particular the topology optimization, has been identified as one of the most challenging tasks in structural design. Various techniques and approaches have been established during the last two decades. Topology optimization usually referred to as layout optimization or general shape optimization [3]. It lets engineers get the optimal topology of structure or new configurations during product design phase, as they are implementing the design of the size

This article presents a discrete variable topology optimization method to solve the simplified convective heat transfer (SCHT) design optimization modeled by Newton's law of cooling. The discrete variable topology optimization is based on the proposed sequential approximate integer programming with trust‐region. Due to the discrete variables, identifying the convective boundary, and implementing this design‐dependent convective boundary condition can be precisely undertaken. As a result, the consistent precise temperature field compared with the commercial software is captured. Besides, the interpolation scheme of the convective coefficient is unnecessary to analyze this SCHT problem. Furthermore, an analytical sensitivity formulation that can simultaneously incorporate the conductive and convective effect is also deduced. Finally, several 2D and 3D valid thermal designs are presented to illustrate the effectiveness of the method. Based on the optimized designs, we find that favorable configurations for a simplified convective problem may be hollowed structure or the dense needle‐like structure. Further, the checkerboard pattern should be interpreted as a convection oscillatory feature but not the discretization error because it cannot be eliminated by using higher‐order elements.

It is of great importance for the development of new products to find the best possible topology or layout for given design objectives and constraints at a very early stage of the design process (the conceptual and project definition phase). Thus, over the last decade, substantial efforts of fundamental research have been devoted to the development of efficient and reliable procedures for solution of such problems. During this period, the researchers have been mainly occupied with two different kinds of topology design processes; the Material or Microstructure Technique and the Geometrical or Macrostructure Technique. It is the objective of this review paper to present an overview of the developments within these two types of techniques with special emphasis on optimum topology and layout design of linearly elastic 2D and 3D continuum structures. Starting from the mathematical-physical concepts of topology and layout optimization, several methods are presented and the applicability is illustrated by a number of examples. New areas of application of topology optimization are discussed at the end of the article. This review article includes 425 references.

Stress-based topology optimization and nonlinear structural topology optimization is gaining increasing attention in order to make topology optimization more realistic. Thus, this paper extends current concepts of topology optimization to the design of structures made of nonlinear materials. An extended bi-directional evolutionary structural optimization (BESO) method for stress minimization topology optimization of material nonlinear structures is proposed in this work. BESO method based on discrete variables can effectively avoid the well-known singularity problem in density-based methods with low-density elements. The maximum von Mises stress is approximated by the p-norm global stress. The sensitivity information for designing variable updates is derived in detail by adjoint method. As for the highly nonlinear stress behavior, the updated scheme takes advantages from two filters respectively of the sensitivity and topological variables to improve convergence. Moreover, the filtered sensitivity numbers are combined with their historical sensitivity information to further stabilize the optimization process. The effectiveness of the proposed method is demonstrated by several 2D benchmark design problems.

This paper will give a short survey about topology optimization of structures. It is particularly focused on topological shape optimization of structures using level-set methods, including the level-set based standard methods and the level-set based alternative methods. The former often directly solve the Hamilton-Jacobi partial differential equation (H-J PDE) to obtain the boundary velocity field using Finite Differential Methods (FDM), and the later commonly employ parametric or equivalent methods to evaluate the velocity field without directly solving the H-J PDE. The unique characteristics of the level-set based topology optimization methods are discussed, and a future perspective and prospects in this research area is also included. A benchmark numerical example is used to showcase the effectiveness of the level-set based methods.

Discrete ground structure topology optimization design methods have to date received considerable attention in structural engineering. An alternative class of structural topology optimization methods, which have not yet received much attention in structural engineering, but which have undergone considerable development in the past decade, are the so-called continuum formulations. In this work, a continuum structural topology optimization formulation is presented and applied to the concept design optimization of structural bracing systems that are needed to stiffen tall structures against sidesway under lateral-wind and seismic-type loading. Although demonstrated here in the context of these specific design examples, continuum structural topology optimization methods are believed to hold potential as a design tool for a wide range of civil engineering type structures. A variety of continuum topology design formulations, including static compliance minimization and eigenvalue optimization, are explored, and solution parameters are varied to show that a number of design possibilities can be realized as solutions.

Topology optimization of pretensioned reflector antennas with unified cable-bar model

According to the requirements of the aerospace industry for high strength, high stiffness, and lightweight structural parts, topology optimization has been proved to be an effective product design method. As one of the most conceptual and prospective structural optimization design methods, topology optimization intends to seek the optimal layout of materials in an allowed design region under a given load and boundary conditions. Thus, the object of study in the article is the method of topological optimization of aircraft structures. The goal of this article is to analyze the existing approaches, algorithms, as well as application of the method of topological optimization in the aerospace field in applied problems. The tasks are to describe the existing various approaches methods, features, and research directions of topological optimization as well as to study the possibility of application in the manufacturing process of composite structures. The following results were obtained. The optimization methods are briefly explained and compared, and the advantages and limitations of each approach are discussed. The various ways of simultaneous optimization of fiber orientation and structural topology were described and analyzed. The features of different methods of continuous fiber orientation optimization method were reviewed. The discrete fiber orientation optimization methods were represented. The possibility of multi-scale concurrent topological optimization was described. The combination of topology optimization and additive manufacturing was considered. Finally, the topology optimization of FRC structures which have been resolved in literature are reviewed and the potential research fields requiring more investigation are pointed out. Conclusions. In the article, a comprehensive review of the topology optimization design of FRC structures was presented. The promising way is to combine topology optimization with additive manufacturing techniques. However, these proposed methods may not suitable for other more complex problems, such as bucking stability and natural frequency. Hence, the topology optimization design of complex FRC components under complicated conditions is the main challenge in the future. This can be a new trend in the topology design of FRC structures.

Dimension reduction and surrogate based topology optimization of periodic structures

Finding optimized structural topology design for maximizing natural frequencies and frequency gaps of continuum structures is crucial for engineering applications. However, two significant numerical issues must be addressed: non‐smoothness caused by multiple frequencies and Artificial Localized Rigid Motion (ALRM) modes due to the violation of the topological constraint related to isolated islands and point‐connections. The above two issues are solved by employing the discrete variable topology optimization method based on Sequential Approximate Integer Programming (SAIP). First, the directional differentiability and multiple frequencies preservation constraints are formulated as the linear integer constraints. And then, the integer programming with these linear integer constraints is established and solved by the discrete variable linear or quadratic programming solver with multi‐constraint Canonical Relaxation Algorithm (CRA). We also prove that the popular Average Modal Frequencies (AMF) strategy, like the Kreisselmeier‐Steinhauser (KS) function, cannot rigorously tackle this non‐smoothness caused by multiple frequencies. Furthermore, to eliminate the ALRM modes and concentrate on the real structural global modes, the burning method is employed to impose the topological constraint of the first Betti number that represents the number of isolated islands and point‐connections. Numerical examples, including 2D and 3D, two‐fold and three‐fold multiple frequencies, natural frequencies and frequency gaps, are presented to show the effectiveness of the proposed method.

This thesis aims at understanding and improving topology optimization techniques focusing on density-based level-set methods and geometrical nonlinearities. Central in this work are the numerical modeling of the mechanical response of a design and the consistency of the optimization process itself. Concerning the first topic, we investigate different means to improve the robustness of density-based numerical models including geometrical nonlinearities. The conventional approach (scaling the local material properties) can result in convergence problems due to excessive deformation in low-stiffness finite elements. To avoid excessive deformation, we combine the element connectivity parameterization method (adapting the connectivity between finite elements) with level-set-based topology optimization. Furthermore, we achieve greater robustness of analysis method using a second and improved approach called element deformation scaling. This approach eliminates the need for solving internal equilibrium equations (needed for the element connectivity parameterization method) via an explicit relation between the local internal and global external displacement field. The second focus of this thesis is on the optimization process of level-set-based topology optimization, and in particular its numerical consistency. We observe that signed-distance reinitialization of the level-set function affects the shape of a design in the optimization process. To minimize this effect, we propose a discrete level-set method that is based on an approximate Heaviside function and focusing on the implementation. Furthermore, we also propose a level-set-based topology optimization method using an exact Heaviside function and mathematical programming that effectively eliminates the need for reinitialization. We demonstrate that our density-based level-set method is closely related to conventional density-based topology optimization methods, while offering the advantage of more control over the geometrical complexity. On the other hand, we confirm that the dependence of the final result on the initial design which remains one of the big challenges for level-set-based topology optimization. The potential of the proposed level-set method is shown by applying it on problems with stress constraints and geometrical nonlinearities and performing manufacturing tolerant topology optimization. Finally, this thesis offers a review of level-set methods for structural topology optimization to identify and discuss the different approaches that are available in literature. We can distinguish between level-set methods by examination of their design parameterization, sensitivities, update procedures and regularization techniques. A level-set-based design parameterization offers the advantage of a crisp distinction between subdomains. For this reason, X-FEM approaches and conforming discretizations are an interesting option to retain the crisp nature of the level-set-based description of the design. Many level-set methods are combined with density-based numerical models and are, therefore, closely related to conventional density-based topology optimization methods. In particular, recently proposed projection methods have much in common with a level-set-based design description. The results of level-set-based TO methods often rely heavily on regularization techniques that introduce inconsistencies in the optimization process. Numerical consistency does not necessarily lead to the best search direction, but is essential to find a Karush-Kuhn-Tucker point of the discretized optimization problem.

This paper presents the optimum load-speed diagram evaluation for a linear micromotor, including multitude cantilever piezoelectric bimorphs, briefly. Each microbeam in the mechanism can be actuated in both axial and flexural modes simultaneously. For this design, we consider quasi-static and linear conditions, and a relatively new numerical method called the smoothed finite element method (S-FEM) is introduced here. For this purpose, after finding an optimum volume fraction for piezoelectric layers through a standard numerical method such as quadratic finite element method, the relevant load-speed curves of the optimized micromotor are examined and compared by deterministic topology optimization (DTO) design. In this regard, to avoid the overly stiff behavior in FEM modeling, a numerical method known as the cell-based smoothed finite element method (CS-FEM, as a branch of S-FEM) is applied for our DTO problem. The topology optimization procedure to find the optimal design is implemented using a solid isotropic material with a penalization (SIMP) approximation and a method of moving asymptotes (MMA) optimizer. Because of the higher efficiency and accuracy of S-FEMs with respect to standard FEMs, the main micromotor characteristics of our final DTO design using a softer CS-FEM are substantially improved.

Optimum topological bracing design of tall steel frames subjected to dynamic loading

The topology of a structure is defined by its genus or number of handles. When the topology of a structure is optimized, its topology might be changed if the material state of a design cell is switched from solid to void or vice versa. In discrete topology optimization, each design cell is either solid or void and there is no topology uncertainty from any grey design cell. Point connection might cause topology uncertainty and is eradicated when hybrid discretization model is used for discrete topology optimization. However, the topology solution of an optimized structure might be uncertain when its design domain is discretized differently, which is commonly called mesh dependence problem. In this paper, the degree of genus based topology optimization strategy is introduced to circumvent this topology uncertainty. With this strategy, the genus of an optimized structure is constrained during its topology optimization process. There is no topology uncertainty even if different design domain discretizations are used. The introduced strategy is used for discrete topology optimization of structures that have multiple loading points in this paper. The presented discrete topology optimization procedure is demonstrated by examples with different degrees of genus and loading conditions.