Extracellular filaments revealed by affinity capture cryo-electron tomography

Cryo-electron tomography (cryo-ET) is a formidable technique to observe the inner workings of vitrified cells at a nanometric resolution in near-native conditions and in three-dimensions. One consequent drawback of this technique is the sample thickness, for two reasons: i) achieving proper vitrification of the sample gets increasingly difficult with sample thickness, and ii) cryo-ET relies on transmission electron microscopy (TEM), requiring thin samples for proper electron transmittance (<500 nm). For samples exceeding this thickness limit, thinning methods can be used to render the sample amenable for cryo-ET. Cryo-focused ion beam (cryo-FIB) milling is one of them and despite having hugely benefitted the fields of animal cell biology, virology, microbiology, and even crystallography, plant cells are still virtually unexplored by cryo-ET, in particular because they are generally orders of magnitude bigger than bacteria, viruses, or animal cells (at least 10 μm thick) and difficult to process by cryo-FIB milling. Here, we detail a preparation method where abaxial epidermal onion cell wall peels are separated from the epidermal cells and subsequently plunge frozen, cryo-FIB milled, and screened by cryo-ET in order to acquire high resolution tomographic data for analyzing the organization of the cell wall. This protocol was validated in: Curr Biol (2022), DOI: 10.1016/j.cub.2022.04.024.

Cryo-electron tomography (cryoET) has become a powerful technique at the interface of structural biology and cell biology, due to its unique ability for imaging cells in their native state and determining structures of macromolecular complexes in their cellular context. A limitation of cryoET is its restriction to relatively thin samples. Sample thinning by cryo-focused ion beam (cryoFIB) milling has significantly expanded the range of samples that can be analyzed by cryoET. Unfortunately, cryoFIB milling is low-throughput, time-consuming and manual. Here, we report a method for fully automated sequential cryoFIB preparation of high-quality lamellae, including rough milling and polishing. We reproducibly applied this method to eukaryotic and bacterial model organisms, and show that the resulting lamellae are suitable for cryoET imaging and subtomogram averaging. Since our method reduces the time required for lamella preparation and minimizes the need for user input, we envision the technique will render previously inaccessible projects feasible.

Cryo-electron tomography (cryoET) is a powerful tool for exploring the molecular structure of large organisms. However, technical challenges still limit cryoET applications on large samples. In particular, localization and cutting out objects of interest from a large tissue sample are still difficult steps. In this study, we report a sample thinning strategy and workflow for tissue samples based on cryo-focused ion beam (cryoFIB) milling. This workflow provides a full solution for isolating objects of interest by starting from a millimeter-sized tissue sample and ending with hundred-nanometer-thin lamellae. The workflow involves sample fixation, pre-sectioning, a two-step milling strategy, and localization of the object of interest using cellular secondary electron imaging (CSEI). The milling strategy consists of two steps, a coarse milling step to improve the milling efficiency, followed by a fine milling step. The two-step milling creates a furrow–ridge structure with an additional conductive Pt layer to reduce the beam-induced charging issue. CSEI is highlighted in the workflow, which provides on-the-fly localization during cryoFIB milling. Tests of the complete workflow were conducted to demonstrate the high efficiency and high feasibility of the proposed method.

Cryo-electron tomography (cryo-ET) is a powerful method to elucidate subcellular architecture and to structurally analyze biomolecules in situ by subtomogram averaging, yet data quality critically depends on specimen thickness. Cells that are too thick for transmission imaging can be thinned into lamellae by cryo-focused ion beam (cryo-FIB) milling. Despite being a crucial parameter directly affecting attainable resolution, optimal lamella thickness has not been systematically investigated nor the extent of structural damage caused by gallium ions used for FIB milling. We thus systematically determined how resolution is affected by these parameters. We find that ion-induced damage does not affect regions more than 30 nanometers from either lamella surface and that up to ~180-nanometer lamella thickness does not negatively affect resolution. This shows that there is no need to generate very thin lamellae and lamella thickness can be chosen such that it captures cellular features of interest, thereby opening cryo-ET also for studies of large complexes.

Cryo-Electron Tomography (cryo-ET) is a method that enables resolving the structure of macromolecular complexes directly in the cellular environment. However, sample preparation for in situ Cryo-ET is labour-intensive and can require both cryo-lamella preparation through cryo-Focused Ion Beam (FIB) milling and correlative light microscopy to ensure that the event of interest is present in the lamella. Here, we present an integrated cryo-FIB and light microscope setup called the Photon Ion Electron microscope (PIE-scope) that enables direct and rapid isolation of cellular regions containing protein complexes of interest. The PIE-scope can be retrofitted on existing microscopes, although the drawings we provide are meant to work on ThermoFisher DualBeams with small mechanical modifications those can be adapted on other brands.

Structural insights into functional regulation of the human CPEB3 prion by an amyloid-forming segment.

Cell activation by stressors is characterized by a sequence of detectable phenotypic cell changes. A given stimulus, depending on its strength, induces modifications in the activity of membrane phospholipid transporters and calpains, which lead to phosphatidylserine exposure, membrane blebbing and the release of microparticles (nanoscale membrane vesicles). This vesiculation could be considered as a warning signal that may be followed, if the stimulus is maintained, by cell detachment-induced apoptosis. In the present study, plasminogen incubated with adherent cells is converted into plasmin by constitutively expressed tPA (tissue-type plasminogen activator) or uPA (urokinase-type plasminogen activator). Plasmin formed on the cell membrane then induces a unique response characterized by membrane blebbing and vesiculation. Hitherto unknown for plasmin, these membrane changes are similar to those induced by thrombin on platelets. If plasmin formation persists, matrix proteins are then degraded, cells lose their attachments and enter the apoptotic process, characterized by DNA fragmentation and specific ultrastructural features. Since other proteolytic or inflammatory stimuli may evoke similar responses in different types of adherent cells, the proposed experimental procedure can be used to distinguish activated adherent cells from cells entering the apoptotic process. Such a distinction is crucial for evaluating the effects of mediators, inhibitors and potential therapeutic agents.

Quantification of bacterial invasion into adherent cells by flow cytometry

Beyond resolution: Cryo-electron tomography of microbial nanomachines in native host context.

Cryo-electron tomography (cryo-ET) has become a powerful approach to study the high-resolution structure of cellular macromolecular machines in situ. However, the current correlative cryo-fluorescence and electron microscopy lacks sufficient accuracy and efficiency to precisely prepare cryo-lamellae of target locations for subsequent cryo-ET. Here we describe a precise cryogenic fabrication system, ELI-TriScope, which sets electron (E), light (L) and ion (I) beams at the same focal point to achieve accurate and efficient preparation of a target cryo-lamella. ELI-TriScope uses a commercial dual-beam scanning electron microscope modified to incorporate a cryo-holder-based transfer system and embed an optical imaging system just underneath the vitrified specimen. Cryo-focused ion beam milling can be accurately navigated by monitoring the real-time fluorescence signal of the target molecule. Using ELI-TriScope, we prepared a batch of cryo-lamellae of HeLa cells targeting the centrosome with a success rate of ~91% and discovered new in situ structural features of the human centrosome by cryo-ET.

In the recent years, cryo-electron microscopy (cryo-EM) single-particle analysis (SPA) has greatly benefited from a multitude of technological advances cumulating in breaking the atomic-resolution barrier for biological macromolecules. Since then, structural insights by cryo-EM have led to driving rational design of new vaccines and therapeutics due to high throughput and high-resolution screening and data collection technologies. Additionally, cryo-electron tomography (cryo-ET) has become an indispensable tool for structural cell biology. In this presentation we elaborate on the latest Thermo Fisher Scientific innovations for 300kV cryo electron microscopy for SPA and cryo-ET to advance more workflow efficiency and performance. Our ongoing mission is to further improve the connectivity between the cryo-FIB and cryo-TEM for an even more streamlined tomography workflow that is safer, faster and cleaner. Data acquisition and processing can be a significant cryo-ET bottleneck. Our integrated solution, combining Thermo Scientific Tomography 5 and Tomo Live, automates pre-acquisition tasks, enhances productivity with predictive tracking and enables rapid quality assessment. Robust and optimized motion correction helps produce crisp tomograms and image quality needed for sub-tomogram averaging. Results are displayed with new quality metrics on a web platform, making the workflow user-friendly and facilitating structural biology advancements.

The involvement of the death adaptor protein FADD and the apoptosis-initiating caspase-8 in CD95 and TRAIL death signalling has recently been demonstrated by the analysis of the native death-inducing signalling complex (DISC) that forms upon ligand-induced receptor cross-linking. However, the role of caspase-10, the other death-effector-domain-containing caspase besides caspase-8, in death receptor signalling has been controversial. Here we show that caspase-10 is recruited not only to the native TRAIL DISC but also to the native CD95 DISC, and that FADD is necessary for its recruitment to and activation at these two protein complexes. With respect to the function of caspase-10, we show that it is not required for apoptosis induction. In addition, caspase-10 can not substitute for caspase-8, as the defect in apoptosis induction observed in caspase-8-deficient cells could not be rescued by overexpression of caspase-10. Finally, we demonstrate that caspase-10 is cleaved during CD95-induced apoptosis of activated T cells. These results show that caspase-10 activation occurs in primary cells, but that its function differs from that of caspase-8.

Cellular shear adhesion, which is the adhesion between cells and the substrates, plays an important role in cell activities. This article aimed to develop a robotic system with automated cell aspiration and in situ micropipette cleaning for shear adhesion force measurement. We proposed a shear adhesion force measurement method based on the balance pressure model and designed a cell placement device with a double-Petri dish to improve the accuracy and efficiency of the measurement. Then we achieved the whole measurement automation by cell selection based on image texture analysis, contact detection based on motion history image (MHI) analysis, and cell aspiration state detection based on sub-pixel image registration. Three types of adherent cells (pancreatic cancer cell, osteoblast, and osteoclast) were used to validate the automated measurement system. The system demonstrated an overall success rate of 75.6% with an average measurement time of 5 min. The experimental results show that pancreatic cancer cells possessed higher shear adhesion force than osteoblasts and osteoclasts. There was a significant difference in adhesion between osteoblasts and osteoclasts. Conclusion: The experimental results demonstrate that the system was an efficient, reproducible approach for shear adhesion force measurement automatically. The robotic system eliminated the stringent skill requirements of operators and improved the consistency and efficiency of the shear adhesion measurement, which can be applied to life science.

Cryogenic focused ion beam (Cryo-FIB) milling has become a standard step in the cryogenic electron tomography (Cryo-ET) workflow and is required to thin cells to electron-semitransparency. However, this destructive process removes the vast majority of the cellular material and raises a critical question: what thin section should be preserved for Cryo-ET analysis? Using a tri-coincident cryogenic FIB-SEM-LM system, we identify an interferometric optical response that can be used for targeting lamella production to fluorescently labeled structures with accuracy beyond the diffraction limit. Here we demonstrate this approach using synthetic samples of fluorescent beads embedded in micron-scale droplets of amorphous ice. We then apply the approach to capture virions inside host cells. Successful targeting is confirmed by Cryo-ET revealing clusters of virions in intracellular vesicles. The method does not require any fluorescent fiducials or axial registration and can be performed on any fluorescently labeled structure that is visible in widefield fluorescence microscopy.

Human Immunodeficiency virus type 1 (HIV-1) is a lentivirus that infects non-dividing cells of the immune system. In non-dividing cells, nuclear import of the viral genome occurs through the nuclear pore complex (NPC), a large macromolecular assembly that forms a channel of ~40 nm across the nuclear envelope. This process requires interactions between NPC components known as nucleoporins and CA (capsid) proteins of HIV-1 post-fusion complexes. In mature HIV-1 virions, multiple copies of CA assemble into a lattice of hexamers and pentamers, forming a cone-shaped capsid core of ~60 nm in width and ~110 nm in length encasing the viral genome. Because of its large size, it was generally believed that the capsid core entirely or partially disassembled prior to its translocation through the NPC. However, nuclear entry and uncoating are rare events and challenging to characterize and therefore subject to a long-standing debate. Here, cryo-electron tomography (cryo-ET) on cryo-focused ion beam (FIB) milled T-cells was combined with subtomogram averaging (SA) to study the ultrastructure of HIV-1 capsids in the process of nuclear entry. Using a HIV-1 variant arrested at the nuclear pore due to a defect in binding of the CA lattice to the host cell protein CPSF6, snapshots of HIV-1 nuclear entry at multiple stages were captured. Reverse transcription-competent HIV-1 complexes were identified in the cytosol, docking to and within the NPC, and in the nucleoplasm of T cells. Surprisingly, in the cytosol and at the NPC, the viral complexes retained cone-shaped capsids highly resembling in size and geometry the mature capsid cores within intact virions. The density at their interior suggested that they were associated with the viral genome. The cone-shape capsids deeply enter into the NPC central channel with their narrow ends. The hexameric lattices of these capsids were intact or nearly intact. These findings argued against the current models of uncoating in the cytosol or at the NPC and rather supported translocation of intact HIV-1 capsids through the NPC. Instead, HIV-1 capsids uncoat in the nucleus of T cells. Inside the nucleus, tube-shape fragments still containing few lattice elements were observed. The lack of density at their inside suggested that the viral genome was released from these complexes. Uncoating may thus occur through the partial opening and remodeling of the hexameric lattices of HIV-1 capsids, rather than a step-wise disassembly. To address how an intact HIV-1 capsid can enter the central channel of NPC, the human NPC from T cells was structurally analyzed in cellulo by SA. The NPC overall structure was not altered upon infection but rather dilated in comparison to the structure previously obtained from purified envelopes. The diameter of the central channel of NPC in T cells corresponded to ~64 nm, suggesting that the translocation of intact HIV-1 capsid through the NPC is geometrically possible. The dilated conformation of NPCs in T cells is independent of HIV-1 infection, but represents a physiological condition of actively transporting NPCs.