Fault-tolerant switched reluctance motor drive using adaptive fuzzy logic controller

In this paper, temperature monitoring of sterilizing equipment system was established with the help of fuzzy and self tuning Adaptive fuzzy logic controller designed in Lab VIEW software. It combines the advantages of both fuzzy logic and self tuning Adaptive fuzzy logic controller. The implementation attempts to rectify the errors between the measured value and the set point which helps to achieve efficient temperature control. The Adaptive fuzzy controller uses defined rules to control the system based on the current values of input variables and temperature errors. The simulation results presented in order to evaluate the proposed method. The result shows that self tuning Adaptive fuzzy logic controller was tolerant to disturbance and the temperature control is most accurate.

Harmony search algorithm and Lyapunov theory based hybrid adaptive fuzzy controller for temperature control of air heater system with transport-delay

The present paper describes the development of a new adaptive fuzzy logic controller (AFLC), which can directly employ an adaptive fuzzy/neuro/neuro-fuzzy function approximator to develop a desired controller, based on an ideal controller input-outpu

This paper presents a theoretical study on a model-reference adaptive fuzzy logic controller for vector-controlled permanent magnet AC servomotor drives. In the proposed system, fuzzy logic is used to implement the direct controller as well as the adaptation mechanism. The operation of the direct fuzzy controller and the fuzzy logic based adaptation mechanism is studied. The control performance of the adaptive fuzzy controller is evaluated by simulation for various operating conditions. The results are compared with that provided by a nonadaptive fuzzy controller. The implementation of proposed adaptive fuzzy controller is also discussed.

In this paper, a fault diagnosis method is presented in order to detection the inter-turn short circuit fault in permanent magnet synchronous motor (PMSM) based on the comparative analysis of two types of controllers. This study consists in the sliding mode control (SMC) of the (PMSM) and the two controllers (fuzzy logic controller (FLC) and Adaptive fuzzy logic controller (AFLC) by taking account of the presence of inter-turn short circuit fault. This study aims to select the most robust controller against the stator faults, load torque variation and reversing rotation speed. Tests regarding these two controllers associated with the sliding mode control were carried on a PMSM 5KW under to different loads, speed and severity degrees of failures for a functioning in healthy and degraded state. The obtained simulation results confirm the superiority and robustness of AFLC-SMC (insensitive to the load torque and the rotation direction, faster response time, decrease the oscillations, and minimization of THD) compared to FLC-SMC.

Adaptive type-2 fuzzy logic control of a bioreactor

This paper demonstrates tracking control of a class of feedback linearizable unknown nonlinear dynamical systems, such as a robotic systems, using a discrete-time fuzzy logic controller (FLC). Designing a discrete-time FLC is significant because almost all FLC's are implemented on digital computers. A repeatable design algorithm and a stability proof are examined for an adaptive fuzzy logic controller that uses fuzzy basis functions based on the fuzzy system, unlike most standard adaptive control approaches which use basis vectors depending on the unknown plant. An /spl epsiv/-modification sort of approach to adapt the fuzzy system parameters is examined. Using this adaptive fuzzy logic controller, uniform ultimate boundedness of the closed-loop signals is presented and that the controller achieves tracking. In fact, the fuzzy system designed is a model-free universal fuzzy controller that works for any system in the given class of systems.

<para xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> Simultaneous adaptive positioning and vibration control of a flexible active composite manipulator with two piezoelectric patches and an active strut are investigated in this paper. First, the configuration of the manipulator is described, and then its dynamics is analyzed. An adaptive fuzzy logic control (AFLC) strategy and an independent modal space adaptive control (IMSAC) scheme are proposed for the active strut motion control and for the manipulator vibration control, respectively. In the AFLC, an adaptive input scaling concept is introduced to adaptively adjust the input of a traditional fuzzy logic controller. As a result, an inverse dead zone is gained to compensate the existing strut dead zone and overcome the dead zone effects. In the IMSAC, a novel adaptive feedback control scheme is developed using the adaptive filtered-x algorithm that is commonly used for adaptive feedforward control. Simulations and experiments demonstrate that the AFLC can provide very accurate positioning control with a relative steady-state positioning error of 0.06%, and that the IMSAC raises the damping ratios of the first two modes of the flexible manipulator 10 times and substantially suppresses the vibration induced by the manipulator motion. </para>

Motion control is an essential part of industrial machinery and manufacturing systems. In this article, the adaptive fuzzy controller is proposed for precision trajectory tracking control in biaxial X-Y motion stage system. The theoretical analyses of direct fuzzy control which is insensitive to parameter uncertainties and external load disturbances are derived to demonstrate the feasibility to track the reference trajectories. The Lyapunov stability theorem has been used to testify the asymptotic stability of the whole system, and all the signals are bounded in the closed-loop system. The intelligent position controller combines the merits of the adaptive fuzzy control with robust characteristics and learning ability for periodic command tracking of a servo drive mechanism. The simulation and experimental results on square, triangle, star, and circle reference contours are presented to show that the proposed controller indeed accomplishes the better tracking performances with regard to model uncertainties. It is observed that the convergence of parameters and tracking errors can be faster and smaller compared with the conventional adaptive fuzzy control in terms of average tracking error and tracking error standard deviation.

An adaptive fuzzy logic controller is proposed for trajectory tracking control of robot manipulators. The approach uses quantitative control schemes to ensure global stability and qualitative control schemes to approximate any nonlinear functions caused by disturbances, system uncertainties and interconnections. With the PD control as a preliminary component in maintaining the local stability, we add nonlinear feedback to ensure global stability of the entire system. An adaptive fuzzy logic controller is incorporated into the robot arm control system as a function approximator to compensate the interconnections effect, unmodeled dynamics, friction, gravity force and uncertainties. The stability criteria of the proposed controller is developed using the Lyapunov synthesis approach. Computer simulations show that the proposed adaptive fuzzy controller outperforms traditional control approaches.

To achieve a better robustness and get a static response of a certain target missiles in longitudinal control, a mathematical model of target missiles is established. The uncontrolled trajectory, the predetermined trajectory and the requirements of the predetermined trajectory are analyzed next. Then the trajectory instruction angle is designed to ensure the stable flight of the target missiles system. To solve the problem that the PID controller cannot adjust parameters online and the output is easy to be disturbed by external noise, the fuzzy adaptive PID control is designed. It enhanced the robustness of the target missiles by fuzzy control, and also has a good response by using PID control. The simulation experiments show the fuzzy adaptive control system can track the predetermined trajectory rapidly and smoothly, and the static error and overshoot were significantly reduced. When the system are affected by noise, the fuzzy adaptive PID control can achieve a good robustness than traditional PID controller.

Research on A Fuzzy Adaptive PID Control Method for Four Rotor UAV Control System With the continuous improvement of national living standards, people have higher and higher requirements for the reliability of power supply. The emergence of unmanned aerial vehicle inspection technology provides a new idea to solve the contradiction between the increasing equipment scale and the increasing inspection requirements. However, at present, the stability of the traditional proportion integration differentiation (PID) control system of the four rotor unmanned aerial vehicle (UAV) is not high enough. During the inspection, there are accidents of drones hitting power equipment from time to time. In view of the above problems, this paper studies the fuzzy adaptive PID control method to support the stable flight of four rotor UAV. The principle of fuzzy control is analyzed. The fuzzy control method and PID control method are deeply integrated. A fuzzy adaptive PID control system is designed. The universe and membership function of the relevant control parameters of the system are formulated. The tuning rules of fuzzy adaptive PID control system are formulated. Finally, the improved control system is simulated. The simulation results show that the fuzzy adaptive PID control algorithm can effectively improve the stability, reliability and emergency ability of UAV. This method can effectively improve the adaptability of UAV to perform complex missions in complex environments. The research results have guiding significance for expanding the application field of UAV.

Abstract- This paper introduces a linear structure of wind turbine, operator and the pitch angle controller. Then, a new method of adaptive fuzzy on the variable speed wind turbines was provided and it was compared with PID and Fuzzy Logic Control ler and the simulation results were analyzed. So when the results of each simulation using PID and Fuzzy controllers and adaptive fuzzy PID controllers provided, the observed advantages and disadvantages of the rotor speed and wind turbine power can be introduced. It can be seen that in PID method the high overshoot is discussed as a disadvantage while it is overcome by using fuzzy controller and overshoot will decrease. The time of reaching to a sustained speed increases slightly and in adaptive fuzzy PID controller, the less overshoot has provided a good and effective performance for system response. The use of adaptive fuzzy PID controller causes the system does not have any steady-state error and at all moments of time, the response rate is better than PID and fuzzy controller. The importance of the amount of overshoot and rate fluctuations is that by reducing these parameters in addition to reducing the cost of preventive care, maintenance and depreciation, the fluctuations in electricity generated by induction generator also greatly reduced.

This study presents a novel optimization algorithm known as the Energy Valley Optimizer Approach (EVOA) designed to effectively develop six optimal adaptive fuzzy logic controllers (AFLCs) comprising 30 parameters for a grid-tied doubly fed induction generator (DFIG) utilized in wind power plants (WPP). The primary objective of implementing EVOA-based AFLCs is to maximize power extraction from the DFIG in wind energy applications while simultaneously improving dynamic response and minimizing errors during operation. The performance of the EVOA-based AFLCs is thoroughly investigated and benchmarked against alternative optimization techniques, specifically chaotic billiards optimization (C-BO), genetic algorithms (GA), and marine predator algorithm (MPA)-based optimal proportional-integral (PI) controllers. This comparative analysis is crucial in establishing the efficacy of the proposed method. To validate the proposed approach, experimental assessments are conducted using the DSpace DS1104 control board, allowing for real-time application of the control strategies. The results indicate that the EVOA-AFLCs outperform the C-BO-based AFLCs, GA-based AFLCs, and MPA-based optimal PIs in several key performance metrics. Notably, the EVOA-AFLCs exhibit rapid temporal response, a high rate of convergence, reduced peak overshoot, diminished undershoot, and significantly lower steady-state error. The EVOA-AFLC outperforms the C-BO-AFLC and GA-AFLC in terms of efficiency, transient responses, and oscillations. In comparison to the MPA-PI, it improves speed tracking by 86.3%, the GA-AFLC by 56.36%, and the C-BO by 39.3%. Moreover, integral absolute error (IAE) for each controller has been calculated to validate the system wind turbine performance. The EVOA-AFLC outperforms other approaches significantly, achieving a 71.2% reduction in average integral absolute errors compared to the GA-AFLC, 24.4% compared to the C-BO-AFLC, and an impressive 84% compared to the MPA-PI. These findings underscore the potential of the EVOA as a robust and effective optimization tool for enhancing the performance of adaptive fuzzy logic controllers in DFIG-based wind power systems.

Fuzzy logic-based algorithms are widely employed in variable-speed drives. However, although they provide an excellent speed-control performance, they may result in significant current harmonics. These may be reduced by employing a non-linear distribution of fuzzy sets in the membership function of the output variable, albeit with some deterioration in the speed-control performance. A simple adaptive fuzzy logic control algorithm, in which the speed-error threshold may be either fixed or self-tuned, is proposed. Simulations and measurements on vector-controlled permanent-magnet brushless AC drives confirm that the proposed adaptive fuzzy logic control results in an excellent speed-control performance and robustness to parameter variations, while current harmonics are reduced. Its performance is compared with that which is achieved when conventional fuzzy logic and PI speed control are employed.