Feature Selection Criteria for Real Time EKF-SLAM Algorithm

The mobile robot which accomplishes a work in explored region does not know location information of surroundings. Traditionally, simultaneous localization and mapping(SLAM) algorithms solve the localization and mapping problem in explored regions. Among the several SLAM algorithms, the EKF (Extended Kalman Filter) based SLAM is the scheme most widely used. The EKF is the optimal sensor fusion method which has been used for a long time. The odometric error caused by an encoder can be compensated by an EKF, which fuses different types of sensor data with weights proportional to the uncertainty of each sensor. In many cases the EKF based SLAM requires artificially installed features, which causes difficulty in actual implementation. Moreover, the computational complexity involved in an EKF increases as the number of features increases. And SLAM is a weak point of long operation time. Therefore, this paper presents a symmetrical model based SLAM algorithm (called M-SLAM).

Simultaneous localization and mapping (SLAM) is a central and complex problem in robot research community. In SLAM, extended Kalman filter (EKF) implementation is widely used to localize the robot and build the environment map incrementally. In this paper, we propose a strong tracking filter (STF) SLAM algorithm. This algorithm applies STF to deal with the non-linear estimated problem in SLAM instead of EKF. It can make the performance of the nonlinear filter approximate to that of optimal linear Kalman Filter (KF), so it can construct high accuracy maps and locate the robot more accurately than EKF SLAM. Simulation experiments illustrate the superior performance of our approach compared to EKF SLAM algorithm.

Simultaneous localization and mapping (SLAM) represents a crucial algorithm in the autonomous navigation of ground vehicles. Several studies were conducted to improve the SLAM algorithm using various sensors and robot platforms. However, only a few works have focused on applications inside low-illuminated featureless tunnel environments. In this work, we present an improved SLAM algorithm using wheel encoder data from an autonomous ground vehicle (AGV) to obtain robust performance in a featureless tunnel environment. The improved SLAM system uses FAST-LIO2 LiDAR SLAM as the baseline algorithm, and the additional wheel encoder sensor data are integrated into the baseline SLAM structure using the extended Kalman filter (EKF) algorithm. The EKF algorithm is used after the LiDAR odometry estimation and before the mapping process of FAST-LIO2. The prediction step uses the wheel encoder and inertial measurement unit (IMU) data, while the correction step uses the FAST-LIO2 LiDAR state estimation. We used an AGV to conduct experiments in flat and inclined terrain sections in a tunnel environment. The results showed that the mapping and the localization process in the SLAM algorithm was greatly improved in a featureless tunnel environment considering both inclined and flat terrains.

Right invariant extended Kalman filter (RIEKF) based simultaneous localization and mapping (SLAM) proposed recently has shown to be able to produce more consistent SLAM estimates as compared with traditional EKF based SLAM methods, including some improved EKF SLAM methods such as observability constrained-EKF (OC-EKF) SLAM. Latest results have demonstrated that its performance is very close to optimization based SLAM algorithms such as iSAM. In this paper, we propose to use RIEKF SLAM algorithm in active SLAM where both the predicted SLAM results for choosing control actions and the actual estimated SLAM results applying the selected control actions are computed using RIEKF algorithms. The advantages over traditional EKF based active SLAM are the more accurate and consistent predicted uncertainty estimates which result in robustness of the active SLAM algorithm. The advantages over optimization based active SLAM is the reduced computational cost. Simulation results are presented to validate the advantages of the proposed algorithm³.

Owing to low cost and relatively accurate range measurement, ultrasonic sensors are widely used in various simultaneous localisation and mapping (SLAM) applications. In spite of the abundance of ultrasonic sensor based SLAM applications, a simple and efficient algorithm for an ultrasonic sensor based positioning system with good accuracy and low computational complexity has not yet emerged. The major difficulty is the trade-off between localisation accuracy and computational complexity in most SLAM algorithms, such as extended Kalman filter (EKF) and particle filter. Typically, they improve localisation accuracy by increasing the density of the landmarks, as a result leading to high computational complexity of algorithms and limiting the utilisation of algorithms into online SLAM systems. This study addresses an improved particle filter algorithm to solve ultrasonic sensor based 2D range-only SLAM problem with relatively good accuracy and low computational complexity. This algorithm uses a simple four fixed features based system model to limit the density of the landmarks. A technique called map adjustment is proposed to increase the accuracy and efficiency of the algorithm. Using map adjustment, the proposed particle filter algorithm can improve localisation accuracy and lower computational complexity. The experiment results demonstrate that this algorithm has a better performance than conventional particle filter localisation algorithm.

Mobile robot Simultaneous Localization and Mapping (SLAM) problem is one of the most active research areas in robotics. In the research and simulation of SLAM, MATLAB-based simulators are widely used due to their comprehensive functionalities and simple usage. In this paper, the main open source MATLAB-based simulators for SLAM and their properties are listed. Two representative ones are concretely introduced from the aspects of data creation and import, motion model and observation model, and algorithms implementation. Simulation results of these two simulators indicate that MATLAB-based simulators are convenient and helpful in the robot SLAM research when developing new algorithms and when comparing accuracy, consistency or convergence of different algorithms. The SLAM algorithms widely used in MATLAB-based simulators, including Extended Kalman Filter (EKF), Unscented Kalman Filter (UKF) based SLAM algorithm and FastSLAM algorithm, are also introduced.

Several works have focused on Simultaneous Localization and Mapping (SLAM), which is a topic that has been studied for more than a decade to meet the needs of robots to navigate in an unknown environment. SLAM is an essential perception functionality in several applications, especially in robotics and autonomous vehicles. RGB-D cameras are among the sensors commonly used with recent SLAM algorithms. They provide an RGB image and the associated depth map, making it possible to solve scale drift with less complexity and create a dense 3D environment representation. Many RGB-D SLAM algorithms have been studied and evaluated on publicly available datasets without considering sensor specifications or image acquisition modes that could improve or decrease localization accuracy. In this work, we deal with indoor localization, taking into account the sensor specifications. In this context, our contribution is a deep experimental study to highlight the impact of the sensor acquisition modes on the localization accuracy, and a parametric optimization protocol for a precise localization in a given environment. Furthermore, we apply the proposed protocol to optimize a depth-related parameter of the SLAM algorithm. The study is based on a publicly available dataset in an indoor environment with a depth sensor. The reconstruction results’ analysis is founded on the study of different metrics involving translational and rotational errors. These metrics errors are compared with those obtained with a state-of-the-art stereo vision-based SLAM algorithm.

This paper describes an approach that combines the navigation data given by a Doppler Velocity Logs (DVL), the MTi Motion Reference Unit (MRU) and a Mechanically Scanned Imaging Sonar (MSIS) as a principal sensor to efficiently solve underwater Simultaneous Localization and Mapping (SLAM) problem in structured environments such as marine platforms, harbors, or dams, etc. The MSIS has been chosen of its capacity to produce a rich representation of the environment. In recent years, to solve the SLAM Autonomous Underwater Vehicle (AUV) problem, very few solutions have been proposed. Our contribution has introduced a method based on the Nonlinear H-infinity filter \((NH\infty )\) to solve the SLAM-AUV problem. In this work, the \(NH\infty \)-SLAM algorithm is implemented to construct a map in partially structured environments and localize the AUV within this map. The data-set used in this paper are taken from the experiments carried out in a marina located in the Costa Brava (Spain) with the Ictineu AUV which is necessary to test different SLAM algorithms. The validation of the proposed algorithm through simulation in offline is presented and compared to the EKF-SLAM algorithm. The \(NH\infty \)-SLAM algorithm provides an accurate estimate than EKF-SLAM and good results were obtained.

Simultaneous localization and mapping (SLAM) techniques are widely researched, since they allow the simultaneous creation of a map and the sensors’ pose estimation in an unknown environment. Visual-based SLAM techniques play a significant role in this field, as they are based on a low-cost and small sensor system, which guarantees those advantages compared to other sensor-based SLAM techniques. The literature presents different approaches and methods to implement visual-based SLAM systems. Among this variety of publications, a beginner in this domain may find problems with identifying and analyzing the main algorithms and selecting the most appropriate one according to his or her project constraints. Therefore, we present the three main visual-based SLAM approaches (visual-only, visual-inertial, and RGB-D SLAM), providing a review of the main algorithms of each approach through diagrams and flowcharts, and highlighting the main advantages and disadvantages of each technique. Furthermore, we propose six criteria that ease the SLAM algorithm’s analysis and consider both the software and hardware levels. In addition, we present some major issues and future directions on visual-SLAM field, and provide a general overview of some of the existing benchmark datasets. This work aims to be the first step for those initiating a SLAM project to have a good perspective of SLAM techniques’ main elements and characteristics.

The calibration problem of binocular stereo vision rig is critical for its practical application. However, most existing calibration methods are based on manual off-line algorithms for specific reference targets or patterns. In this paper, we propose a novel simultaneous localization and mapping (SLAM)-based self-calibration method designed to achieve real-time, automatic and accurate calibration of the binocular stereo vision (BSV) rig’s extrinsic parameters in a short period without auxiliary equipment and special calibration markers, assuming the intrinsic parameters of the left and right cameras are known in advance. The main contribution of this paper is to use the SLAM algorithm as our main tool for the calibration method. The method mainly consists of two parts: SLAM-based construction of 3D scene point map and extrinsic parameter calibration. In the first part, the SLAM mainly constructs a 3D feature point map of the natural environment, which is used as a calibration area map. To improve the efficiency of calibration, a lightweight, real-time visual SLAM is built. In the second part, extrinsic parameters are calibrated through the 3D scene point map created by the SLAM. Ultimately, field experiments are performed to evaluate the feasibility, repeatability, and efficiency of our self-calibration method. The experimental data shows that the average absolute error of the Euler angles and translation vectors obtained by our method relative to the reference values obtained by Zhang’s calibration method does not exceed 0.5˚ and 2 mm, respectively. The distribution range of the most widely spread parameter in Euler angles is less than 0.2˚ while that in translation vectors does not exceed 2.15 mm. Under the general texture scene and the normal driving speed of the mobile robot, the calibration time can be generally maintained within 10 s. The above results prove that our proposed method is reliable and has practical value.

This article presents the design and implementation of an autonomous navigation framework for a Quadrotor-Unmanned Aerial Vehicle (UAV) based on Simultaneous Localization and Mapping (SLAM). The proposed system leverages the Extended Kalman Filter (EKF)-SLAM algorithm, operating solely on LiDAR data and without reliance on GPS, making it highly suitable for navigation in GPS-denied or cluttered environments such as indoor settings, tunnels, and urban canyons. A dynamic model of the UAV is developed to describe its motion under 3-DoF, forming the basis for both simulation and control. The EKF-SLAM algorithm is implemented within the Robot Operating System (ROS) and tested using the Gazebo simulation environment. Experimental results confirm the algorithm’s effectiveness in real-time localization and 3D environment mapping using LiDAR data, even in the absence proprioceptive input sensor.

This paper proposes a novel monocular vision-based SLAM (Simultaneous Localization and Mapping) method using both position and orientation information of ceiling lamps. Conventional approaches used corner or line features as landmarks in their SLAM algorithms, but these methods were often unable to achieve stable navigation due to a lack of reliable visual features on the ceiling. Since lamp features are usually placed some distances from each other in indoor environments, they can be robustly detected and used as reliable landmarks. We used both the position and orientation of a lamp feature to accurately estimate the robot pose. Its orientation is obtained by calculating the principal axis from the pixel distribution of the lamp area. Both corner and lamp features are used as landmarks in the EKF (Extended Kalman Filter) to increase the stability of the SLAM process. Experimental results show that the proposed scheme works successfully in various indoor environments.

Purpose – To build a persistent map with visual landmarks is one of the most important steps for implementing the visual simultaneous localization and mapping (SLAM). The corner detector is a common method utilized to detect visual landmarks for constructing a map of the environment. However, due to the scale-variant characteristic of corner detection, extensive computational cost is needed to recover the scale and orientation of corner features in SLAM tasks. The purpose of this paper is to build the map using a local invariant feature detector, namely speeded-up robust features (SURF), to detect scale- and orientation-invariant features as well as provide a robust representation of visual landmarks for SLAM. Design/methodology/approach – SURF are scale- and orientation-invariant features which have higher repeatability than that obtained by other detection methods. Furthermore, SURF algorithms have better processing speed than other scale-invariant detection method. The procedures of detection, description and matching of regular SURF algorithms are modified in this paper in order to provide a robust representation of visual landmarks in SLAM. The sparse representation is also used to describe the environmental map and to reduce the computational complexity in state estimation using extended Kalman filter (EKF). Furthermore, the effective procedures of data association and map management for SURF features in SLAM are also designed to improve the accuracy of robot state estimation. Findings – Experimental works were carried out on an actual system with binocular vision sensors to prove the feasibility and effectiveness of the proposed algorithms. EKF SLAM with the modified SURF algorithms was applied in the experiments including the evaluation of accurate state estimation as well as the implementation of large-area SLAM. The performance of the modified SURF algorithms was compared with those obtained by regular SURF algorithms. The results show that the SURF with less-dimensional descriptors is the most suitable representation of visual landmarks. Meanwhile, the integrated system is successfully validated to fulfill the capabilities of visual SLAM system. Originality/value – The contribution of this paper is the novel approach to overcome the problem of recovering the scale and orientation of visual landmarks in SLAM tasks. This research also extends the usability of local invariant feature detectors in SLAM tasks by utilizing its robust representation of visual landmarks. Furthermore, data association and map management designed for SURF-based mapping in this paper also give another perspective for improving the robustness of SLAM systems.

This paper presents a simulator to simulating two key problems-underwater perception and autonomous manipulation o In the simulator a controller-observer strategy is proposed. A new SLAM (Simultaneous Localization and Mapping) algorithm - UKF (Unscented Kalman Filter) is used to estimate the state of UVMS (Underwater Vehicle Manipulator Systems) and the target object. 3D Simulation results show that the new SLAM algorithm can get the optimal estimation of state of UVMS and the target object, and the end-effector of manipulator can reach the desired object and the accuracy is centimeter level.

This paper presents a sensor fusion strategy applied for Simultaneous Localization and Mapping (SLAM) in dynamic environments. The designed approach consists of two features: (i) the first one is a fusion module which synthesizes line segments obtained from laser rangefinder and line features extracted from monocular camera. This policy eliminates any pseudo segments that appear from any momentary pause of dynamic objects in laser data. (ii) The second characteristic is a modified multi-sensor point estimation fusion SLAM (MPEF-SLAM) that incorporates two individual Extended Kalman Filter (EKF) based SLAM algorithms: monocular and laser SLAM. The error of the localization in fused SLAM is reduced compared with those of individual SLAM. Additionally, a new data association technique based on the homography transformation matrix is developed for monocular SLAM. This data association method relaxes the pleonastic computation. The experimental results validate the performance of the proposed sensor fusion and data association method.