Feature specific analysis of a deep convolutional neural network for ageing classification

Identification of crops is an important topic in the agricultural domain. Hyperspectral remote sensing data are very useful for crop feature extraction and classification. Remote sensing data is an unstructured data and Convolutional Neural Network (CNN) can work on unstructured data efficiently. This paper presents an evaluation of CNN for crop classification using the Indian Pines standard dataset obtained from the AVIRIS sensor and the study area dataset obtained from the EO-1hyperion sensor. Optimized CNN has been tuned by training the model on different parameters. It has been compared with two classification algorithms: Deep Neural Network (DNN) and Convolutional Autoencoder. According to the test results, the proposed optimized CNN model provided better results as compared to the other two methods. CNN has given 97 ± 0.58% overall accuracy for the Indian Pines standard dataset and 78 ± 2.43% for our study area dataset.

Deep learning models are highly parameterized, resulting in difficulty in inference and transfer learning for image recognition tasks. In this work, we propose a layered pathway evolution method to compress a deep convolutional neural network (DCNN) for classification of masses in digital breast tomosynthesis (DBT). The objective is to prune the number of tunable parameters while preserving the classification accuracy. In the first stage transfer learning, 19 632 augmented regions-of-interest (ROIs) from 2454 mass lesions on mammograms were used to train a pre-trained DCNN on ImageNet. In the second stage transfer learning, the DCNN was used as a feature extractor followed by feature selection and random forest classification. The pathway evolution was performed using genetic algorithm in an iterative approach with tournament selection driven by count-preserving crossover and mutation. The second stage was trained with 9120 DBT ROIs from 228 mass lesions using leave-one-case-out cross-validation. The DCNN was reduced by 87% in the number of neurons, 34% in the number of parameters, and 95% in the number of multiply-and-add operations required in the convolutional layers. The test AUC on 89 mass lesions from 94 independent DBT cases before and after pruning were 0.88 and 0.90, respectively, and the difference was not statistically significant (p > 0.05). The proposed DCNN compression approach can reduce the number of required operations by 95% while maintaining the classification performance. The approach can be extended to other deep neural networks and imaging tasks where transfer learning is appropriate.

In recent years, deep learning has made good progress and has been applied to face recognition, video monitoring, image processing, and other fields. In this big data background, deep convolution neural network has also received more and more attention. In order to extract the ancient Chinese characters effectively, the paper will discuss the structure model, pool process, and network training of deep convolution neural network and compare the algorithm with the traditional machine learning algorithm. The results show that the accuracy and recall rate of the Chinese characters in the plaque of Ming Dynasty can reach the peak, 81.38% and 81.31%, respectively. When the number of training samples increases to 50, the recognition rate of MFA is 99.72%, which is much higher than other algorithms. This shows that the algorithm based on deep convolution neural network and big data analysis has excellent performance and can effectively identify the Chinese characters under different dynasties, different sample sizes, and different interference factors, which can provide a powerful reference for the extraction of ancient Chinese characters.

This paper presents a novel technique based on gradient boosting to train the final layers of a neural network (NN). Gradient boosting is an additive expansion algorithm in which a series of models are trained sequentially to approximate a given function. A neural network can also be seen as an additive expansion where the scalar product of the responses of the last hidden layer and its weights provide the final output of the network. Instead of training the network as a whole, the proposed algorithm trains the network sequentially in $T$ steps. First, the bias term of the network is initialized with a constant approximation that minimizes the average loss of the data. Then, at each step, a portion of the network, composed of $J$ neurons, is trained to approximate the pseudo-residuals on the training data computed from the previous iterations. Finally, the $T$ partial models and bias are integrated as a single NN with $T \\times J$ neurons in the hidden layer. Extensive experiments in classification and regression tasks, as well as in combination with deep neural networks, are carried out showing a competitive generalization performance with respect to neural networks trained with different standard solvers, such as Adam, L-BFGS, SGD and deep models. Furthermore, we show that the proposed method design permits to switch off a number of hidden units during test (the units that were last trained) without a significant reduction of its generalization ability. This permits the adaptation of the model to different classification speed requirements on the fly

Introduction Catathrenia is a rare sleep-related breathing disorder characterized by recurrent monotonous groaning during sleep. The acoustic characteristics of groaning and snoring sounds have been investigated. This study aims to propose a deep convolutional neural network (CNN) for automatic binary classification. Methods This study consisted of 3728 episodes of groaning sounds and 4577 episodes of snoring sounds obtained from synchronized audio of full-night polysomnography. Four features extracted from log-scaled mel-spectrograms were used as input. The background gaussian noise and the time-shifting were used to augment the dataset. The dataset was randomly split into training (70%), validation (15%), and testing datasets (15%). A deep learning convolutional neural network architecture was trained and evaluated. Results The proposed CNN model achieves an accuracy of 95.0% on the binary classification of groaning and snoring sounds. The model attains a sensitivity/recall of 96.4%, a specificity of 93.4%, and an F1 score of 94.84%. Conclusion The proposed CNN architecture has performed well in the automatic binary classification of groaning and snoring sounds, which could reduce difficulties in acoustic analyses of groaning episode detection. The model needs to be verified with more audio data before it can be put into clinical use better. Support (if any)

Deep learning systems for automatic diagnosis of infant cry signals

With the continuous development of science, more and more research results have proved that machine learning is capable of diagnosing and studying the major depressive disorder (MDD) in the brain. We propose a deep learning network with multibranch and local residual feedback, for four different types of functional magnetic resonance imaging (fMRI) data produced by depressed patients and control people under the condition of listening to positive- and negative-emotions music. We use the large convolution kernel of the same size as the correlation matrix to match the features and obtain the results of feature matching of 264 regions of interest (ROIs). Firstly, four-dimensional fMRI data are used to generate the two-dimensional correlation matrix of one person’s brain based on ROIs and then processed by the threshold value which is selected according to the characteristics of complex network and small-world network. After that, the deep learning model in this paper is compared with support vector machine (SVM), logistic regression (LR), k-nearest neighbor (kNN), a common deep neural network (DNN), and a deep convolutional neural network (CNN) for classification. Finally, we further calculate the matched ROIs from the intermediate results of our deep learning model which can help related fields further explore the pathogeny of depression patients.

Deep learning (also known as deep structured learning, hierarchical learning, or deep machine learning) is a branch of machine learning based on a set of algorithms that attempt to model high-level abstractions in data by using a deep graph with multiple processing layers, composed of multiple linear and nonlinear transformations. Deep learning has been characterized as a class of machine learning algorithms with the following characteristics [257]: • They use a cascade of many layers of nonlinear processing units for feature extraction and transformation. Each successive layer uses the output from the previous layer as input. The algorithms may be supervised or unsupervised and applications include pattern analysis (unsupervised) and classification (supervised). • They are based on the (unsupervised) learning of multiple levels of features or representations of the data. Higher-level features are derived from lower-level features to form a hierarchical representation. • They are part of the broader machine learning field of learning representations of data. • They learn multiple levels of representations that correspond to different levels of abstraction; the levels form a hierarchy of concepts. These definitions have in common: multiple layers of nonlinear processing units and the supervised or unsupervised learning of feature representations in each layer, with the layers forming a hierarchy from low-level to high-level features. Various deep learning architectures such as deep neural networks, convolutional deep neural networks, deep belief networks (DBN), and recurrent neural networks have been applied to fields like computer vision, automatic speech recognition, natural language processing, audio recognition, and bioinformatics where they have been shown to produce state-of-the-art results on various tasks. In this chapter we start in Section 7.1 with an introduction, giving a brief history of this field, the relevant literature, and its applications. Then we study some basic concepts of deep learning such as convolutional neural networks, recurrent neural networks, backpropagation algorithm, restricted Boltzmann machines, and deep learning networks in Section 7.2. Then we illustrate three examples for Apache Spark implementation for mobile big data (MBD), user moving pattern extraction, and combination with nonparametric Bayesian learning, respectively, in Sections 7.3 through 7.5. Finally, we have summary in Section 7.6.

Agricultural machines (AMs) refer to equipment usually used in agriculture such as tractors, hand tools, and power tools. It reduces the labor work, increases farms produce, enhances goods quality, and reduces farming time and cost-saving. However, the faults in the fuel system, blades, engine of the AM will often result in degraded vehicle performance, compromising the vehicle’s efficiency and strength. To overcome these problems, fault detection algorithms are developed to identify the faults even before they occur with high classification accuracy. The deep convolutional neural network (DCNN) is a popular deep learning model that offers a high classification recognition rate, and it is widely adopted in similar fields for monitoring the health status of machines. Very few state-of-the-art works are available to identify the health state of agricultural machines using deep learning techniques and extracting the acoustic features from an audio recording. The acoustic signal-based agricultural machine health monitoring and fault prediction model using smartphones is a cost-effective option that is deployed in this proposed work. To optimize the network structure of the DCNN, this paper proposes a Levy flight optimization algorithm (LFOA). The DCNN-LFOA model is implemented on the smartphone’s on-board device (OBD) along with the health monitoring application. The LFOA algorithm minimizes the number of neurons in the DCNN hidden layer and the number of input features from the audio recordings and enhances the classification accuracy. The LFOA algorithm provides the optimal solution which is essential in developing a lightweight DCNN model to implement in the edge processor (smartphone). The experimental results prove that the proposed model gives improved accuracy for the six faults to be classified and serves as a new research model to identify the health condition of the vehicles.

Breast tumor is a fatal threat to the health of women. Ultrasound (US) is a common and economical method for the diagnosis of breast cancer. Breast imaging reporting and data system (BI-RADS) category 4 has the highest false-positive value of about 30% among five categories. The classification task in BI-RADS category 4 is challenging and has not been fully studied. This work aimed to use convolutional neural networks (CNNs) for breast tumor classification using B-mode images in category 4 to overcome the dependence on operator and artifacts. Additionally, this work intends to take full advantage of morphological and textural features in breast tumor US images to improve classification accuracy. First, original US images coming directly from the hospital were cropped and resized. In 1385 B-mode US BI-RADS category 4 images, the biopsy eliminated 503 samples of benign tumor and left 882 of malignant. Then, K-means clustering algorithm and entropy of sliding windows of US images were conducted. Considering the diversity of different characteristic information of malignant and benign represented by original B-mode images, K-means clustering images and entropy images, they are fused in a three-channel form multi-feature fusion images dataset. The training, validation, and test sets are 969, 277, and 139. With transfer learning, 11 CNN models including DenseNet and ResNet were investigated. Finally, by comparing accuracy, precision, recall, F1-score, and area under curve (AUC) of the results, models which had better performance were selected. The normality of data was assessed by Shapiro-Wilk test. DeLong test and independent t-test were used to evaluate the significant difference of AUC and other values. False discovery rate was utilized to ultimately evaluate the advantages of CNN with highest evaluation metrics. In addition, the study of anti-log compression was conducted but no improvement has shown in CNNs classification results. With multi-feature fusion images, DenseNet121 has highest accuracy of 80.22±1.45% compared to other CNNs, precision of 77.97±2.89% and AUC of 0.82±0.01. Multi-feature fusion improved accuracy of DenseNet121 by 1.87% from classification of original B-mode images (p<0.05). The CNNs with multi-feature fusion show a good potential of reducing the false-positive rate within category 4. The work illustrated that CNNs and fusion images have the potential to reduce false-positive rate in breast tumor within US BI-RADS category 4, and make the diagnosis of category 4 breast tumors to be more accurate and precise.

Introduction Atmospheric corrosion is the main cause of metallic heritage degradation when they are exposed to relative humidity, temperature cycle and air contaminants. Corrosivity maps are one of the preventive strategies for atmospheric corrosion mitigation, but they do not provide enough information about corrosion mechanism, besides that long experimentation periods are required [1]. Moreover, electrochemical techniques are alternatives to speed up results, but their relationship with constantly changing environmental variables is difficult to control.Currently, Artificial Intelligence has been introduced in corrosion engineering studies, because of its capability to make predictions based on big data. Also, experimental data of Electrochemical Impedance Spectroscopy had been used in Artificial Neural Network training to obtain Nyquist Diagrams [2]. The objective of this work is to obtain computational models of Artificial Neural Networks to predict atmospheric corrosion in Bronze with nanostructured patina with SiO2, in marine environments. Method Environmental parameters were taken from database previously reported [3,4], and from Civil Protection Secretariat of Veracruz. Whilst electrochemical evaluation consists in Polarization Resistance and Electrochemical Impedance Spectroscopy; they were carried out in a Gamry Interface 1000 Potentiostat with a Saturated Calomel Reference Electrode (SCE) and a graphite bar as counter electrode in an agar gelled cell. Meanwhile, working electrode was bronze with nanostructured patina with SiO2. Two patina were prepared, the first with CuSO4 solution (0.015 mol L-1) and the second applying a CuNO3 solution (20% wt).The 13 variables used in the database for Artificial Neural Networks (ANN) training were: exposure time, chloride concentration, sulfur compounds concentration, relative humidity, precipitation level, windspeed, temperature, nanocoating presence, corrosion potential, corrosion rate, frequency, real and imaginary component of impedance. The values of each variable were treated with measures of central tendency and dispersion, as well as correlation matrix and histograms, which allowed to find a relationship between variables, and choosing the inputs for ANN. The prediction models consisted in 5, 9, 10 and 12 neurons in the input layer (R5E, R9E, R10E and R12E, respectively), a hidden layer, and Zima as only neuron in the output layer. The number of neurons in hidden layer varied from 1 to 8 until the highest coefficient of determination was achieved. The computational model was performed using the toolbox in MATLAB with a feedforward ANN. It is worth mention that the hidden and output layers used a hyperbolic tangent and a linear transfer function, respectively, and a Levenberg-Marquardt algorithm as training function was used in the models. Results and Conclusions Figure 1 presents the coefficient of determination (R2) and root mean squared error (RMSE) with different ANN architectures. In the four models, the highest value was reached with 8 neurons in the hidden layer. Then, the linear regressions for R5E, R9E, R10E and R12E models and 8 neurons in the input layer were compared in Figure 2. In that sense, the Nyquist Diagrams in Figure 3 were simulated with the R9E and R12E models. Also, they were compared with experimental Nyquist Diagrams for Bronze with patina of CuSO4 and CuNO3, with and without SiO2 nanoparticles, at 56 days of exposure in marine atmospheres. The simulations demonstrated how an ANN model with 12 neurons in the input layer, 8 neurons in the hidden layer and 1 neuron in the output layer can be used as a corrosion prediction model of bronze with nanostructured patina with SiO2.

[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] Camera traps are a popular tool to sample animal populations because they are noninvasive, detect a variety of species, and can record many thousands of animal detections per deployment. Cameras are typically set to take bursts of multiple images for each detection, and are deployed in arrays of dozens or hundreds of sites, often resulting in millions of images per study. The task of converting images to animal detection records from such large image collections is daunting, and made worse by situations that generate copious empty pictures from false triggers (e.g. camera malfunction or moving vegetation) or pictures of humans. We offer the first widely available computer vision tool for processing camera trap images. Our results show that the tool is accurate and results in substantial time savings for processing large image datasets, thus improving our ability to monitor wildlife across large scales with camera traps. In this dissertation, we have developed new image/video processing and computer vision algorithms for efficient and accurate object detection and sequence-level classiffication from natural scene camera-trap images. This work addresses the following five major tasks: (1) Human-animal detection. We develop a fast and accurate scheme for human-animal detection from highly cluttered camera-trap images using joint background modeling and deep learning classification. Specifically, first, We develop an effective background modeling and subtraction scheme to generate region proposals for the foreground objects. We then develop a cross-frame image patch verification to reduce the number of foreground object proposals. Finally, We perform complexity-accuracy analysis of deep convolutional neural networks (DCNN) to develop a fast deep learning classification scheme to classify these region proposals into three categories: human, animals, and background patches. The optimized DCNN is able to maintain high level of accuracy while reducing the computational complexity by 14 times. Our experimental results demonstrate that the proposed method outperforms existing methods on the camera-trap dataset. (2) Object segmentation from natural scene. We first design and train a fast DCNN for animal-human-background object classification, which is used to analyze the input image to generate multi-layer feature maps, representing the responses of different image regions to the animal-human-background classifier. From these feature maps, we construct the so-called deep objectness graph for accurate animal-human object segmentation with graph cut. The segmented object regions from each image in the sequence are then verfied and fused in the temporal domain using background modeling. Our experimental results demonstrate that our proposed method outperforms existing state-of-the-art methods on the camera-trap dataset with highly cluttered natural scenes. (3) DCNN domain background modeling. We replaced the background model with a new more efficient deep learning based model. The input frames are segmented into regions through the deep objectness graph then the region boundaries of the input frames are multiplied by each other to obtain the regions of movement patches. We construct the background representation using the temporal information of the co-located patches. We propose to fuse the subtraction and foreground/background pixel classiffcation of two representation : a) chromaticity and b) deep pixel information. (4) Sequence-level object classiffcation. We proposed a new method for sequence-level video recognition with application to animal species recognition from camera trap images. First, using background modeling and cross-frame patch verification, we developed a scheme to generate candidate object regions or object proposals in the spatiotemporal domain. Second, we develop a dynamic programming optimization approach to identify the best temporal subset of object proposals. Third, we aggregate and fuse the features of these selected object proposals for efficient sequence-level animal species classification.

PurposeThe aim of this study was to analyse and review deep learning convolutional neural networks for detecting and diagnosing early-stage dental caries on periapical radiographs.Materials and MethodsIn order to conduct this review, the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were followed. Studies published from 2015 to 2021 under the keywords (deep convolutional neural network) AND (caries), (deep learning caries) AND (convolutional neural network) AND (caries) were systematically reviewed.ResultsWhen dental caries is improperly diagnosed, the lesion may eventually invade the enamel, dentin, and pulp tissue, leading to loss of tooth function. Rapid and precise detection and diagnosis are vital for implementing appropriate prevention and treatment of dental caries. Radiography and intraoral images are considered to play a vital role in detecting dental caries; nevertheless, studies have shown that 20% of suspicious areas are mistakenly diagnosed as dental caries using this technique; hence, diagnosis via radiography alone without an objective assessment is inaccurate. Identifying caries with a deep convolutional neural network-based detector enables the operator to distinguish changes in the location and morphological features of dental caries lesions. Deep learning algorithms have broader and more profound layers and are continually being developed, remarkably enhancing their precision in detecting and segmenting objects.ConclusionClinical applications of deep learning convolutional neural networks in the dental field have shown significant accuracy in detecting and diagnosing dental caries, and these models hold promise in supporting dental practitioners to improve patient outcomes.

Deep convolutional neural networks have become a dominant solution for numerous image classification tasks. However, a main criticism is the poor explainability due to the black-box characteristic, which hurdles the extensive usage of deep convolutional neural networks. To address this issue, this paper proposes a new evolutionary multi-objective based method, which aims to explain the behaviours of deep convolutional neural networks by evolving local explanations on specific images. To the best of our knowledge, this is the first evolutionary multi-objective method to evolve local explanations. The proposed method is model-agnostic, i.e. it is applicable to explain any deep convolutional neural networks. ImageNet is used to examine the effectiveness of the proposed method. Three well-known deep convolutional neural networks -VGGNet, ResNet, and MobileNet, are chosen to demonstrate the modelagnostic characteristic. Based on the experimental results, it can be observed that the local explanations are understandable to end-users, who need to check the sensibility of the evolved explanations to decide whether to trust the predictions made by the deep convolutional neural networks. Furthermore, the local explanations evolved by the proposed method improves the confidence of deep convolutional neural networks making the predictions. Lastly, the pareto front and convergence analyses indicate that the proposed method can form a good set of nondominated solutions.

The paper proposes a data-driven pre-processing optimization for radar data using a parametric convolutional neural network. The proposed method is applied on human activity classification as a use case. Present radar-based activity recognition system exploit micro-Doppler signature by generating Doppler spectrograms or a temporal series of range-Doppler maps, followed by deep neural networks or machine learning approaches for classification. Those radar data representations are typically generated on the basis of short-time Fourier transformations. A Fourier transformation equally resolves the frequency space, which may be sub-optimal in some applications. Although deep convolutional neural networks (DCNN) have been shown to implicitly learn features from raw sensor data in other fields, such as speech recognition, yet, for the case of radar-based DCNNs, pre-processing is required to develop a scalable and robust classification or regression application. In this paper, we propose a parametric convolutional neural network that mimics the radar pre-processing across fast-time and slow-time radar data through 2D sinc filter or 2D wavelet filter kernels to extract features for classification of various human activities. During training only the filter parameters of the 2D sinc filters or 2D wavelets are learned, leading to optimized feature representation for the classification task. It is demonstrated that our proposed solution shows improved results compared to equivalent DCNN architectures that rely on Doppler spectrograms or radar data cubes as input data.