Figure 5: Sensor search architecture.

The Internet of Things (IoT) is a paradigm that can connect an enormous number of intelligent objects, share large amounts of data, and produce new services. However, it is a challenge to select the proper sensors for a given request due to the number of devices in use, the available resources, the restrictions on resource utilization, the nature of IoT networks, and the number of similar services. Previous studies have suggested how to best address this challenge, but suffer from low accuracy and high execution times. We propose a new distributed model to efficiently deal with heterogeneous sensors and select accurate ones in a dynamic IoT environment. The model’s server uses and manages multiple gateways to respond to the request requirements. First, sensors were grouped into three semantic categories and several semantic sensor network types in order to define the space of interest. Second, each type’s sensors were clustered using the Whale-based Sensor Clustering (WhaleCLUST) algorithm according to the context properties. Finally, the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) was improved to search and select the most adequate sensor matching users’ requirements. Experimental results from real data sets demonstrate that our proposal outperforms state-of-the-art approaches in terms of accuracy (96%), execution time, quality of clustering, and scalability of clustering.

This study addresses the challenges of real-time channel state estimation and adaptive parameter adjustment in dynamic LoRa networks, where the existing methods often fail to adapt efficiently to highly variable channel conditions. This study presents an innovative approach for real-time channel state estimation and adaptive parameter adjustment in long-range (LoRa) networks in dynamic Internet of Things (IoT) environments. When these types of networks are used in dynamic IoT environments, they are known to face challenges in the two above-mentioned areas. In our approach, a hybrid feature extraction method that integrates statistical analysis with domain-specific knowledge is utilized for real-time data labeling, focusing on the signal-to-noise (SNR) and received signal strength indicator (RSSI) metrics. This approach employs an adaptive sliding window technique for efficient processing of recent data. Subsequently, a multi-task long short-term memory (LSTM) neural network is introduced for the simultaneous prediction of multiple channel states. This multi-task model employs an online incremental learning approach to enhance the real-time performance and responsiveness of the model within dynamic environments. It also incorporates a confidence measure for estimated states to increase the prediction reliability. Finally, based on the confidence measure predictions and channel state estimation, the system dynamically adjusts the LoRa parameters, including the spreading factor, coding rate, transmission power, and bandwidth. Our results demonstrate that the confidence-based adaptive strategy coupled with adaptive sliding window processing and incremental learning effectively balances performance optimization with stability in challenging IoT scenarios. This study contributes a robust, data-driven approach for real-time channel state estimation and adaptive parameter control, addressing the unique challenges of IoT networks in dynamic environments. Our approach achieved a packet delivery ratio of 100%, reduced energy consumption to 0.07987 Joules per packet, and demonstrated a prediction accuracy between 97.70% and 97.9% for estimating the different channel states. This innovative framework provides significant improvements in channel state estimation, communication reliability, adaptive parameter control, and computational efficiency, thereby ensuring robust performance in IoT environments at the same time.

Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) is an algorithm that can be used for alternative design in a decision support system (DSS). TOPSIS provides recommendation so that users can get information that support their decision, for example a tourist wants to visit a tourist destination in Malang, then TOPSIS provides recommendations of tourist destinations in the form of ranking recommendation, with the highest rank is the most recommended recommendation. TOPSIS-based Mobile Decision Support System (DSS) has relatively low algorithm complexity. However, there are some cases that require development from personal DSS to group DSS, for example tourists rarely come alone, in which case most of them invite friends or family. For users who are more than 1 person, the TOPSIS algorithm can be combined with the BORDA algorithm. This study explains about the implementation & testing of TOPSIS and TOPSIS-BORDA as algorithms for personal and group DSS in mobile-based tourism recommendation system in Malang. Correlation testing was conducted to test the effectiveness of TOPSIS in mobile-based recommendation system. In previous study, correlation testing for personal DSS showed that there was a relationship between the recommendation and user choice, with correlation value of 0.770769231. In this study, correlation testing for group DSS showed there is a positive correlation of 0.88 between the recommendations of the group produced by TOPSIS-BORDA and personal recommendations for each user produced by TOPSIS.

The fuzzy TOPSIS (The Technique for Order of Preference by Similarity to Ideal Solution) is an attractive tool for measuring complex phenomena based on uncertain data. The original version of the method assumes that the object assessments in terms of the adopted criteria are expressed as triangular fuzzy numbers. One of the crucial stages of the fuzzy TOPSIS is selecting the fuzzy conversion scale, which is used to evaluate objects in terms of the adopted criteria. The choice of a fuzzy conversion scale may influence the results of the fuzzy TOPSIS. There is no uniform approach in constructing and selecting the fuzzy conversion scale for the fuzzy TOPSIS. The choice is subjective and made by researchers. Therefore, the aim of the article is to present a new, objective approach to the construction of fuzzy conversion scales based on Item Response Theory (IRT) models. The following models were used in the construction of fuzzy conversion scales: Polychoric Correlation Model (PM), Polytomous Rasch Model (PRM), Rating Scale Model (RSM), Partial Credit Model (PCM), Generalized Partial Credit Model (GPCM), Graded Response Model (GRM), Nominal Response Model (NRM). The usefulness of the proposed approach is presented on the example of the analysis of a survey’s results on measuring the quality of professional life of inhabitants of selected communes in Poland. The obtained results indicate that the choice of the fuzzy conversion scale has a large impact on the closeness coefficient values. A large difference was also observed in the spreads of triangular fuzzy numbers between scales based on IRT models and those used in the literature on the subject. The use of the fuzzy TOPSIS with fuzzy conversion scales built based on PRM, RSM, PCM, GPCM, and GRM models gives results with a greater range of variability than in the case of fuzzy conversion scales used in empirical research.

Nations have developed their plans for sustainable development, including social, environmental, and economic aspects. Internet of things (IoT) has been introduced as the next wave of innovation. However, there is still little evidence of progressing IoT in developing countries. Therefore, making policies for investors and tech-entrepreneurs are much needed. Iran, as a transition economy, follows its 1404 economic outlook and should prioritise industries for using IoT. Thus, the aim of this study is to prioritise these industries. In the Iran Telecommunication Research Center and by using the multiple attribute decision making (MADM), criteria weight and prioritising the industries were obtained and each aspect of 'sustainable IoT', obtained and for this aim and to prioritise the industries the analytic hierarchy process (AHP), technique for order of preference by similarity to ideal solution (TOPSIS) and ELimination Et Choix Traduisant la REalité e (ELECTRE) methods applied. The result is, respectively, healthcare, energy, smart home, transportation and retailing. The research sheds light on how policy makers can implement policies to use the IoT for achieving sustainable development.

Application of AHP, TOPSIS, and TFNs to plant selection for phytoremediation of petroleum-contaminated soils in shale gas and oil fields

In software defect prediction systems, choosing the best data mining classification algorithm is essential for efficient decision-making. The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) method for ranking classification algorithms according to several criteria is assessed in this study. Classifiers were evaluated and ranked using the AR1 and JM1 datasets using a structured multi-criteria decision-making (MCDM) methodology. According to the results, Lazy-IBK continuously performs better than other classifiers, demonstrating how well TOPSIS finds the top-performing models. Furthermore, the comparative study of classification algorithms shows how reliable the approach is when taking into account variables like scalability, accuracy, and computational efficiency. According to the results, TOPSIS considerably enhances classifier selection when it comes to software defect prediction, resulting in data mining applications that make better-informed and impartial decisions. Key Words: MCDM, Software Defect Prediction, TOPSIS

A research on the cutting database system based on machining features and TOPSIS

<p>One common multi-criteria decision making (MCDM) technique is the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), which is frequently applied in several application fields. Finding an ideal and an anti-ideal solution, which are then utilized to determine the distances between the alternatives and the ideal solution, is the foundation of the TOPSIS approach. The method then ranks the alternatives according to their closeness to the ideal solution. TOPSIS is able to handle both quantitative and qualitative criteria, however, the method can be sensitive to the weight of the criteria, and the ranking results can be influenced by the choice of the reference alternatives. This paper provides an overview of the TOPSIS method, its applications, main characteristics and limitations. The paper also provides step-by-step instructions on how to apply the TOPSIS method, including the determination of the criteria weights, the construction of the decision matrix, and the calculation of the TOPSIS scores.</p>

The importance of disaster logistics and its share in the logistics sector are increasing significantly. Most disasters are difficult to predict; therefore, a set of measures seems to be necessary to reduce the risks. Thus, disaster logistics needs to be designed with the pre-disaster and post-disaster measures. These disasters are experienced intensely in Turkey and the importance of these measures becomes more evidential. Therefore, accurate models are required to develop an effective disaster preparedness system. One of the most important decisions to increase the preparedness is to locate the centres for handling material inventory. In this context, this paper analyses the response phase designing the disaster distribution centres in Turkey at the provincial level. AHP (Analytical Hierarchy Process) based TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) method and goal programming model integration is used to decide alternative locations of distribution centres. TOPSIS method is employed for ranking the locations, which is based on hazard scores, total area, population, and distance to centre. Two conflicting objectives are first proposed in the goal programming formulation, in which maximization of the TOPSIS scores and minimization of the number of distribution centres covering all demands named set covering model are included. Although Gecimli has the highest priority with 0.8 p score in the TOPSIS ranking, Altincevre (0.77) and Buzlupınar (0.75) ensure both the TOPSIS score and coverage of the demand nodes. The results from this paper confirm that the computational results ensure disaster prevention insights especially in regions with limited data.

Smart cities aim at integrating various IoT (Internet of Things) technologies by providing many opportunities for the development, governance, and management of user services. One of the ways to support this idea is to use cloud and edge computing techniques to reduce costs, manage resource consumption, enhance performance, and connect the IoT devices more effectively. However, the selection of services remains a significant research question since there are currently different strategies towards cloud computing, including services for central remote computing (traditional cloud model) as well as distributed local computing (edge computing). In this paper, we offer an integrated view of these two directions and the selection among the edge technologies based on MCDA (Multiple Criteria Decision Analysis) algorithms. To this end, we propose a foglet as a middleware that aims at achieving satisfactory levels of customer services by using fuzzy similarity and TOPSIS (Technique for Order of Preference by Similarity to Ideal Solution) to facilitate the rating and selection of services in the fog-to-cloud environment. Then, we describe the selection process with a numerical example, and conclude our work with an outline of future perspectives.

The application of multiple criteria decision-making (MCDM) techniques in real-life problems has increased in recent years. The need to build advanced decision models with higher capabilities that can support decision-making in a broad spectrum of applications, promotes the integration of MCDM techniques with applicable systems, including artificial intelligence, and Geographic Information Systems (GIS). The Analytic Hierarchy Process (AHP) and Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) are among the most widely adopted MCDM techniques capable of resolving water resources challenges. A critical problem associated with water resource management is dam site selection. This paper presents a comparative analysis of TOPSIS and AHP in the context of decision-making using GIS for dam site selection. The comparison was made based on geographic and water quality criteria. The geographical criteria are geology, land use, sediment, erosion, slope, groundwater, and discharge. The water quality criteria include Soluble Sodium Percentage, Total Dissolved Solid, Potential of Hydrogen, and Electrical Conductivity of water. A ratio estimation procedure was used to determine the weights of these criteria. Both methods were applied for selection of optimal sites for dams in the Sistan and Baluchestan province, Iran. The results show that the TOPSIS method is better suited to the problem of dam site selection for this study area. Actual locations of dams constructed in the area were used to verify the results of both methods.

This study presents an integrated framework for evaluating the structural condition of existing reinforced concrete buildings using a combination of rebound hammer testing, the Hybrid Risk Assessment Method (RAM), and the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). Four buildings of varying ages and usage types were selected to capture diverse structural conditions and exposure environments. Rebound hammer tests, conducted in accordance with IS 13311 (Part 2): 1992, provided in-situ compressive strength estimates, while RAM quantified the severity, probability, and detectability of potential failures to derive a Risk Priority Number (RPN) for each structure. These risk scores, along with building age and rebound values, were incorporated into the TOPSIS multi-criteria decision-making framework to rank the buildings by their proximity to an ideal condition. Results indicated that Building 3 exhibited the highest relative closeness to the ideal solution (RCi = 1.0), followed by Building 2, Building 1, and Building 4, the latter having the highest risk and lowest performance. The integrated RAM–TOPSIS approach demonstrated its effectiveness in combining qualitative expert judgment with quantitative field data, enabling a robust, data-driven prioritization of maintenance interventions. This methodology enhances the reliability of non-destructive testing outcomes and supports cost-effective, safety-focused asset management for existing structures. Keywords- Building condition assessment, Non-destructive testing, Rebound hammer test, Risk Assessment Method (RAM), TOPSIS

This study focuses on analyzing the feasibility of pension loan applicants for state civil servants at PT. BPR DP TASPEN, with a focus on the use of the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) as an alternative analysis method. Previously, PT. BPR DP TASPEN uses a subjective evaluation method to assess the feasibility of loan applicants, which leads to potential risks and errors in the analysis. In this study, the authors recommend the use of TOPSIS as a support decision-making system to standardize the analytical process. TOPSIS was chosen for its efficiency in reducing the calculation time and ease of implementation. This method uses criteria and alternatives to calculate, produces the best alternative based on a weighted bobot, and provides the final decision. The results of the study indicate that TOPSIS provides a good solution for determining the feasibility of pension loan applicants. By considering criteria such as age, pension, debt, bank loan, health history, and income, only seven out of 40 loan applicants met the best criteria, which were close to the ideal positive solution. The selected applicants were recommended for approval as pension loans by the company, reducing the potential risks of credit and improving the accuracy of the selection of loan criteria.

PurposeThe purpose of this study is to provide a decision support tool to deal with the problem of seting priorites among patients competing for limited health care resources. Limited resources and unlimited demands prevent health-care services to be provided to all those in need. This became publicity evident with the current Covid-19 pandemic. Although controversial, health care rationing has always existed and is now inevitable. Setting priorities becomes then inevitable. How to define those priorities is a complex and yet irresolvable issue mainly because it involves several and conflicting criteria, translated into efficiency and equity considerations. This is why multi-criteria decision analysis (MCDA) was introduced to health care as an appropriate decision-support framework for solving complex problems.Design/methodology/approachThis paper proposes the application of two combined approaches – analytic hierarchy process (AHP)-Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) and AHP-VlseKriterijumska Optimizacija I Kompromisno Resenje (VIKOR), as decision support tools to rank patients with competing needs in a more effective and equitable way. A rationing scenario involving four patients, differentiated by personal characteristics and health conditions, is used to illustrate, test and compare the applicability of both approaches. After extraction of the relative weights of the prioritization criteria involved in the hypothetical scenario from paired wise comparison methods, TOPSIS and VIKOR priority setting methods were designed.FindingsResults suggest that patients ranking from both combination approaches are similar and in accordance with the order made directly by health-care professionals. Therefore, the relative weights computed by AHP in combination with TOPSIS and/or VIKOR methods could be used with suitable applicability by health-care decision-makers.Originality/valueThis study is the first attempt to apply a combination of MCDA methods to patients’ prioritization context and the first to cross previous studies to deepen and consolidate the research.