Finger Vein Recognition Based on Anatomical Features of Vein Patterns

Recently, finger vein sensors have been embedded in all kinds of electronic devices for personal identification, such as intelligent door locks and attendance machines. The embedded sensors are generally small, thus capturing only part of the finger vein. However, prior studies have focused on near-full finger vein recognition, without considering the partial finger vein image caused by the small imaging window of the finger vein sensor. This paper aims to study personal identification based on partial finger vein images, known as small-area finger vein recognition. The effect of the small-area finger vein on recognition performance is first analyzed by cutting out the local part from the near-full finger vein image to model a small-area finger vein image. Second, a small-area finger vein database is built using a commercial finger vein imaging device, in which the vein pattern from approximately one-third of one adult finger is captured. To explore more discriminative information from small-area finger vein images, we propose a locality-constrained consistent dictionary learning (LCDL) method to fuse multiple features for small-area finger vein recognition. Finally, the proposed method is evaluated on the self-built small-area finger vein database and four synthetic small-area finger vein databases. Experimental results show the promising recognition performance of the proposed method.

Exploring finger vein based personal authentication for secure IoT

Finger vein recognition has received a lot of attention recently and is viewed as a promising biometric trait. In related methods, vein pattern-based methods explore intrinsic finger vein recognition, but their performance remains unsatisfactory owing to defective vein networks and weak matching. One important reason may be the neglect of deep analysis of the vein anatomy structure. By comprehensively exploring the anatomy structure and imaging characteristic of vein patterns, this paper proposes a novel finger vein recognition framework, including an anatomy structure analysis-based vein extraction algorithm and an integration matching strategy. Specifically, the vein pattern is extracted from the orientation map-guided curvature based on the valley- or half valley-shaped cross-sectional profile. In addition, the extracted vein pattern is further thinned and refined to obtain a reliable vein network. In addition to the vein network, the relatively clear vein branches in the image are mined from the vein pattern, referred to as the vein backbone. In matching, the vein backbone is used in vein network calibration to overcome finger displacements. The similarity of two calibrated vein networks is measured by the proposed elastic matching and further recomputed by integrating the overlap degree of corresponding vein backbones. Extensive experiments on two public finger vein databases verify the effectiveness of the proposed framework.

Finger vein recognition has received more attention in recent years due to its high security and promising development potential. However, extracting complete vein patterns and obtaining features from the original images suffer from the low contrast of finger vein images, which dramatically restrains the performance of finger vein recognition algorithms. Inspired by this motivation, we propose an explicit and implicit feature fusion Network (EIFNet) for finger vein verification. It can extract more comprehensive and discriminative features by complementarily fusing the features extracted from binary vein masks and gray original images. We design a feature fusion module (FFM) acting as a bridge between mask feature extraction module (MFEM) and contextual feature extraction module (CFEM) to achieve the optimal fusion of features. To obtain more accurate vein masks, we develop a novel finger vein pattern extraction method and provide the first finger vein segmentation dataset THUFVS. We solve the difficulty of building finger vein segmentation datasets in a simple but effective way, and develop a complete process encompassing dataset creation, data augmentation refinement and network design, which refers to the Mask Generation Module (MGM), for the deep learning based finger vein pattern extraction method. Experimental results demonstrate the superior verification performance of EIFNet on three widely used datasets compared with other existing methods.

Recent years have seen a plenty of personal identification methods with different biometrics such as finger pattern, face, palm-print and vein. The majority of these methods focus on complex image data projections and transforms in Fourier space, wavelet space or other domains, which usually bring heavy load in computation and difficult understanding in perceptual intuition. Moreover, these methods, oriented to multiple samples learning, are constricted usually in application. Among so much biometrics, vein, as a living feature with high anti-counterfeiting capability, has attracted considerable attention. In this paper, we propose a structured personal identification approach using finger vein Location and Direction Coding(LDC). First of all, we design a finger vein imaging device with near-infrared(NIR) light source, by which a database for finger vein images is established. Subsequently, we make use of the brightness difference in the finger vein image to extract the vein pattern. Furthermore, finger vein LDC is proposed and performed, which creates a structured feature image for each finger vein. Finally, the structured feature image is utilized to conduct the personal identification on our image database for finger vein, which includes 440 vein images from 220 different fingers. The equal error rate of our method for this database is 0.44%.

To carry out the finger vein recognition effectively and quickly, according to the characteristics of horizontal and vertical two-dimensional linear discriminant analysis ((2D)2LDA) reducing the dimensions, an algorithm of finger vein recognition is proposed. The algorithm is two direction weighted (2D)2LDA ((W2D)2LDA) based on preprocessing image of the figure vein image. Firstly, the original finger vein image is pre-processed. Secondly, the normalized vein image is gotten. Finally, the algorithm of this paper is used to be recognized. The effect of the rate of cumulate eigenvalue for 2DLDA and (2D)2LDA is analyzed. The effect of the weighted value and the rate of cumulate eigenvalue on W2DLDA, W(2D)2LDA and (W2D)2LDA are analyzed as well. Experimental results on our database of finger vein images show that the method presented achieves high recognition accuracy. The redundant information of eigenvectors extracted by (2D)2LDA is restrained strongly, and the bi-direction weighted effect is better than the one direction weighted effect. The average recognition rate of (W2D)2LDA is higher than 2DLDA, W2DLDA, (2D)2LDA and W(2D)2LDA.

Finger vein recognition is the process of determining whether or not the input finger image belongs to a specific person Finger-vein recognition is a new research area in the field of biometric recognition. Finger vein patterns are considered to be diverse even in identical twins and between an individual’s different fingers. Gabor Filter is the main algorithm utilized in this paper. Finger-vein Pattern Extraction is done with the Gabor Filter. Prior to feature extraction, many preprocessing processes must be completed. Image Normalization, ROI Extraction using Background Separation, and Image Contrast Enhancement are the preprocessing steps. During post-processing, we also applied certain approaches to improve the clarity of the retrieved finger vein pattern. Morphological Operations are employed during post-processing to expand the vein pattern’s shape and structure. The SURF technique is also utilized to detect descriptive important points in the Vein pattern image, which aids us in the matching process. An experimental result shows that the suggested system extracts vein patterns with near-perfect accuracy and recognizes them with high accuracy.

Finger vein recognition has become a research hotspot in the field of biometrics due to its advantages of non-contact acquisition, unique information, and difficulty in terms of forging or pirating. However, in the real-world application process, the extraction of image features for the biometric remains a significant challenge when the captured finger vein images suffer from blur, noise, or missing feature information. To address the above challenges, we propose a novel deep reinforcement learning-based finger vein image recovery method, DRL-FVRestore, which trained an agent that adaptively selects the appropriate restoration behavior according to the state of the finger vein image, enabling continuous restoration of the image. The behaviors of image restoration are divided into three tasks: deblurring restoration, defect restoration, and denoising and enhancement restoration. Specifically, a DeblurGAN-v2 based on the Inception-Resnet-v2 backbone is proposed to achieve deblurring restoration of finger vein images. A finger vein feature-guided restoration network is proposed to achieve defect image restoration. The DRL-FVRestore is proposed to deal with multi-image problems in complex situations. In this paper, extensive experimental results are conducted based on using four publicly accessible datasets. The experimental results show that for restoration with single image problems, the EER values of the deblurring network and damage restoration network are reduced by an average of 4.31% and 1.71%, respectively, compared to other methods. For images with multiple vision problems, the EER value of the proposed DRL-FVRestore is reduced by an average of 3.98%.

Finger vein recognition, which is a promising biometric method for identity authentication, has attracted significant attention. Considerable research focuses on transmission-type finger vein recognition, but this type of authentication is difficult to implement in mobile consumer devices. Therefore, reflection-type finger vein recognition should be developed. In the reflection-type vein recognition field, the majority of researchers concentrate on palm and palm dorsa patterns, and only a few pay attention to reflection-type finger vein recognition. Thus, this paper presents reflection-type finger vein recognition for biometric application that can be integrated into mobile consumer devices. A database is built to test the proposed algorithm. A novel method of region-of-interest localization for a finger vein image is introduced, and a scheme for effectively extracting finger vein features is proposed. Experiments demonstrate the feasibility of reflection-type finger vein recognition.

Finger vein verification is a promising biometric pattern for personal identification in terms of security and convenience. The recognition performance of this technology heavily relies on the quality of finger vein images and on the recognition algorithm. To achieve efficient recognition performance, a special finger vein imaging device is developed, and a finger vein recognition method based on sparse representation is proposed. The motivation for the proposed method is that finger vein images exhibit a sparse property. In the proposed system, the regions of interest (ROIs) in the finger vein images are segmented and enhanced. Sparse representation and sparsity preserving projection on ROIs are performed to obtain the features. Finally, the features are measured for recognition. An equal error rate of 0.017% was achieved based on the finger vein image database, which contains images that were captured by using the near-IR imaging device that was developed in this study. The experimental results demonstrate that the proposed method is faster and more robust than previous methods.

Recent advancements in finger vein recognition technology: Methodology, challenges and opportunities

In the process of image acquisition, the contrast between veins and non-veins in finger vein images is not high due to the influence of the fuzzy light source, skin scattering and finger movement. To solve this problem, a finger vein image enhancement method is proposed (GTGFs), which enhances finger vein patterns by setting guided image as input image firstly. On this basis, the tri-Gaussian model is based on disinhibitory properties of the concentric receptive field used to locally enhancing the image. The parameters of the tri-Gaussian model are determined based on the finger vein width information. The experiment results show that the proposed enhancement method can significantly enhance the finger vein patterns and improve the recognition effect of the methods based on vein pattern segmentation.

As an emerging biometric modality, finger vein recognition has received considerable attentions. However, recent studies have shown that finger vein biometrics is vulnerable to presentation attacks, i.e. printed versions of authorized individuals’ finger veins could be used to gain access to facilities or services. In this paper, we have designed a specific shallow convolutional neural network (CNN) for finger vein presentation attack detection (PAD), which is called as FPNet for short. The proposed FPNet has been evaluated on a public-database and an intra-database. Lots of h × h patches have been extracted from vein images with a stride s for dataset augmentation and then used to train our networks without any pre-trained model. For further improving models’ generalizability and robustness, training patches of two databases have been mixed together and our best model has achieved an accuracy of 100% on both test datasets, clearly outperforming state-of-the-art methods.

In this work, we propose an efficient joint Bayesian model that expanded with soft biometric traits for finger vein recognition, which is different from the existing mainstream finger vein recognition methods that extract features from the region of interest (ROI) of finger vein images. First, a two-branch convolutional neural networks (CNNs) is designed to extract feature simultaneously from finger shape images and ROI vein images, respectively, the aim of which is to extract more information from different parts of fingers. Then, two different features are fused by concatenating. Finally, a joint Bayesian recognition loss is used to train the proposed two-branch CNN which is to promote intra-class variance minimization and inter-class variation maximization. Further, in our framework, a end-to-end learning method of CNNs and joint Bayesian recognition loss is achieved to optimize the parameters. Experiments performed on two public finger vein databases demonstrate that the proposed model is efficient and achieves better performance than state-of-the-art methods.

Among the many biometric recognition techniques, finger vein recognition has many advantages, such as in-vivo recognition, high anti-counterfeiting, high acceptability, and high stability, etc., but the structure of finger vein is simple and the available information is less. The traditional feature extraction method is not fully used to extract finger vein structure information. In this paper, discrete separable shearlet transformation (DSST) are used to extract finger vein features. DSST is used to decompose the image of finger vein, and the decomposition coefficient is obtained and analyzed. The experimental results show that this method can provide an effective and sparse feature description of the original finger vein image, and also obtain a good recognition effect when the quality of some images is poor.