Finite-Key Analysis of 1-Decoy Method Quantum Key Distribution with Intensity Fluctuation

Covert communication methods are used in the communication with high security level. When it turns to quantum communication, covertness is also an important concern which is firstly discussed by Arrazola and Scarani (Phys Rev Lett, 117:250503, 2016). To make quantum key distribution (QKD) protocol more suitable in the scenarios need high security, we propose a covert QKD protocol with decoy-state method in this paper. The secure key rate and covertness of the covert decoy-state QKD are proved. We compare the performance of the covert decoy-state QKD with those of the original decoy-state QKD and covert QKD without decoy states in numerical simulations. It shows that (1) the covert decoy-state QKD can have a performance comparable to the original decoy-state QKD protocol besides its covertness; (2) the covert decoy-state QKD can have a considerable improvement of transmission distance over covert QKD without decoy states at the cost of a small change of covertness parameter. Furthermore, the statistical fluctuation due to the finite length of data is also taken into account based on the Gaussian analysis method.

Quantum key distribution (QKD) enables the establishment of shared keys between two distant users, Alice and Bob, based on the fundamental principles of quantum mechanics, and it has proven to possess information-theoretic security. In most of QKD systems, Alice and Bob require a shared reference frame, and real-time calibration of the reference frame increases system costs and reduces its performance. Fortunately, the reference-frame-independent QKD protocol has been proposed, overcoming reference-frame drift issues and receiving widespread attention. However, in practical QKD systems, the non-ideal characteristics of realistic devices introduce certain inconsistency between the theory and the practice. In real-world quantum key distribution systems, device imperfections can lead to security vulnerabilities, thereby reducing system security. For example, imperfections in the encoding apparatus at the source end may result in errors in the quantum states. The inherent defects in the detection part may cause after-pulse effects and dead-time effects, thus reducing the key rate. Therefore, in this work, we propose a practical state-preparation error tolerant reference-frame-independent quantum key distribution protocol by taking imperfections in both the source and the detectors into account. Moreover, a three-intensity decoy-state scheme for modeling analysis and numerical simulations is employed. In this protocol, we reduce the influence of state-preparation errors on the key rate by utilizing virtual state methods to precisely estimate the phase-error rate. Furthermore, by characterizing the effects of after-pulses and dead-time on the key rate, our protocol exhibits higher robustness and can effectively address issues related to detector imperfections. This approach can also be extended to other quantum key distribution protocols with higher security levels, such as measurement-device-independent quantum key distribution protocol and twin-field quantum key distribution, further mitigating the influence of device imperfections on practical implementation of QKD system. Therefore, our present work provide important reference value for putting the quantum key distributions into practical application.

The twin-field quantum key distribution (TF-QKD) protocol and its variants can overcome the well-known rate-loss bound without quantum repeaters, which have attracted significant attention. Generally, to ensure the security of these protocols, weak coherent states with continuous randomized phases are always assumed in the test mode. However, this assumption is difficult to meet in practice. To bridge the gap between theory and practice, we propose two alternative discrete-phase-randomized (DPR)-twin-field quantum key distribution protocols, which remove the phase sifting procedure in the code mode. Simulation results show that when compared with previous discrete-phase-randomized-twin-field quantum key distribution protocols, our modified protocols can significantly improve the secret key rate in the low channel loss range, which is very promising for practical twin-field quantum key distribution systems.

With practical quantum key distribution (QKD) systems, estimating the safe transmission distance and the safe bit rate under some transmission distance is quite important. For the practical QKD setup, with decoy states, the photon count distribution of the faint laser pulse with signal states can be optimized to acquire the maximum transmission distance. With this goal, we implement a method combining mathematical derivation and numerical simulation to find the optimal photon count distribution under realistic conditions; the numerical simulation results show that the new distributions can be employed in the decoy QKD system to reach safe transmission distances farther than those reached by systems with the Poisson distribution.

Quantum key distribution (QKD) protocols allow for information theoretically secure distribution of (classical) cryptographic key material. However, due to practical limitations the performance of QKD implementations is somewhat restricted. For this reason, it is crucial to find optimal protocol parameters, while guaranteeing information theoretic security. The performance of a QKD implementation is determined by the tightness of the underlying security analysis. In particular, the security analyses determines the key-rate, i.e., the amount of cryptographic key material that can be distributed per time unit. Nowadays, the security analyses of various QKD protocols are well understood. It is known that optimal protocol parameters, such as the number of decoy states and their intensities, can be found by solving a nonlinear optimization problem. The complexity of this optimization problem is typically handled by making a number of heuristic assumptions. For instance, the number of decoy states is restricted to only one or two, with one of the decoy intensities set to a fixed value, and vacuum states are ignored as they are assumed to contribute only marginally to the secure key-rate. These assumptions simplify the optimization problem and reduce the size of search space significantly. However, they also cause the security analysis to be non-tight, and thereby result in sub-optimal performance. In this work, we follow a more rigorous approach using both linear and nonlinear programs describing the optimization problem. Our approach, focusing on the decoy-state BB84 protocol, allows heuristic assumptions to be omitted, and therefore results in a tighter security analysis with better protocol parameters. We show an improved performance for the decoy-state BB84 QKD protocol, demonstrating that the heuristic assumptions typically made are too restrictive. Moreover, our improved optimization frameworks shows that the complexity of the performance optimization problem can also be handled without making heuristic assumptions, even with limited computational resources available.

<sec>Measurement-device-independent quantum key distribution (MDI-QKD) protocol can effectively resist all possible attacks targeting the measurement devices in a quantum key distribution (QKD) system, thus exhibiting high security. However, due to the protocol’s high sensitivity to channel attenuation, its key generation rate and transmission distance are significantly limited in practical applications.</sec><sec>To improve the performance of MDI-QKD, researchers have proposed quantum-memory (QM)-assisted MDI-QKD protocol, which has enhanced the protocol's performance to a certain extent. Nevertheless, under finite-size conditions where the total number of transmitted pulses is limited, accurately estimating the relevant statistical parameters is still a challenge. As a result, existing QM-assisted MDI-QKD schemes still encounters issues such as low key rates and limited secure transmission distances.</sec><sec>To solve these problems, this work proposes a novel improved finite-size QM-assisted MDI-QKD protocol. By utilizing quantum memories to temporarily store early-arriving pulses and release them synchronously, the protocol effectively reduces the influence caused by channel asymmetry. Additionally, the protocol introduces a four-intensity decoy-state method to improve the estimation accuracy of single-photon components. Meanwhile, to mitigate the influence of finite-length effects on QM schemes, the proposed protocol combines a collective constraint model and a double-scanning algorithm to jointly estimate scanning error counts and vacuum-related counts. This approach enhances the estimation accuracy of the single-photon detection rate and phase error rate under finite-size conditions, thereby significantly improving the secure key rate of the MDI-QKD system.</sec><sec>Simulation results show that under the same experimental conditions, compared with the existing QM-assisted three-intensity decoy-state MDI-QKD protocol and the four-intensity decoy-state MDI-QKD protocol based on Heralded Single-photon Source (HSPS), the proposed protocol extends the secure transmission distance by more than 30 km and 100 km, respectively. This proves that under the same parameter settings, the proposed scheme exhibits significant advantages in both key rate and secure transmission distance. Therefore, this research provides important theoretical references and valuable benchmarks for developing long-distance, high-security quantum communication networks.</sec>

Chapter 6 - Quantum key distribution

Usually, a shared reference frame is indispensable for practical quantum key distribution (QKD) systems. As a result, most QKD systems need active alignment of reference frame due to the unknown and slowly variances of reference frame introduced by environment. Quite interestingly, reference-free-independent (RFI) QKD can generate secret-key bits without alignment of reference frame. However, RFI QKD may be still vulnerable to detector side channel attacks. Here, we propose a new RFI QKD protocol, in which all detector side channels are removed. Furthermore, our protocol can still tolerate unknown and slow variance of reference frame without active alignment. And a numerical simulation shows that long security distance is probable in this protocol.

A Mach–Zehnder modulator (MZM) is necessary for implementing a decoy-state protocol in a practical quantum key distribution (QKD) system. However, an MZM bias control method optimized for QKD systems has been missing to date. In this study, we propose an MZM bias control method using N (≥2) diagnostic pulses. The proposed method can be efficiently applied to a QKD system without any additional hardware such as light sources or detectors. Furthermore, it does not reduce the key rate significantly because it uses time slots allocated to existing decoy pulses. We conducted an experimental demonstration of the proposed method in a field-deployed 1 × 3 QKD network and a laboratory test. It is shown that our method can maintain the MZM extinction ratio stably over 20 dB (bit error rate ≤1%), even in an actual network environment for a significant period. Consequently, we achieved successful QKD performances.

For the past few years, the security of practical quantum key distribution systems has attracted a lot of attention. Device-independent quantum key distribution was proposed to design a real-life secure quantum key distribution system with imperfect and untrusted quantum devices. In this paper, we analyzed the security of BB84 protocol in a device-independent scenario based on the entanglement distillation method. Since most of the reported loopholes are in receivers of quantum key distribution systems, we focus on condition that the transmitter of the system is perfectly coincident with the requirement of the BB84 protocol, while the receiver can be controlled by eavesdropper. Finally, the lower bound of the final secret-key rate was proposed and we explained why the secure-key rate is similar to the well-known result for the original entanglement distillation protocol.

The decoy-state method was proposed as an effective way to resist photon-number splitting attack in quantum key distribution (QKD) system. However, due to the limitation of computing power, the final key rate of the QKD system is affected by statistical fluctuation. Until now, the key rate of active decoy-state method under statistical fluctuations has been rigorously analysed and improved by applying the improved Chernoff bound. In this paper, the improved Chernoff bound method is applied in the passive decoy-state method and an improved bound for estimating the final key rate is obtained. The simulation results show that the maximum secure transmission distance by our method can reach 205 km under standard optical fiber, which is very close to the asymptotic limit of 212 km. With a number of pulses up to 1013, our method can reach the highest final key rates among existing results, which can be considered as the best choice for QKD implementations with passive mudulation.

Security of data transported in telecommunication networks is of primary importance for internet service providers (ISP) as data safety is at the basis of the mutual trust with customers. People were looking for theoretically secure transmission techniques since a long-time to ensure long-term confidentiality of data flows exchanged on these networks. Besides advanced encryption algorithms and the recently proposed post-quantum cryptography (PQC), a physics-based technology using quantum key distribution (QKD) was proposed a long time ago to approach this objective. QKD recently gained a renewed interest with many research programs worldwide supported by public authorities, and some pre-industrial QKD systems delivered to the market. However, some constraints of optical transport networks make sometimes complicated the deployment of such QKD systems in the field, such as the need of a dedicated fiber infrastructure for QKD, or the impossibility for a quantum key to pass through an optical amplifier. In this paper, we report the transmission of a coherent 400-Gbps dual-polarization 16QAM channel that transports QKD-secured 100-GbEthernet data stream with other fifty-four WDM channels at 100-Gbps over 184-km of standard single mode fiber (SSMF) through three QKD links (of 66-km, 50-km and 66-km, respectively) and two trusted nodes. On the two longest sections of the link, the quantum key and WDM signals are propagated on two different fibers, while on the shortest section of 50-km the QKD signal and WDM comb co-propagate on a same fiber. Secret key rates (SKR) and quantum bit error rate (QBER) are measured and reported on each of the three fiber sections. Various analyses are carried out on the co-propagation section of 50-km: the SKR / QBER sensitivity to the optical power of the WDM comb, or to the optical signal-to-noise ratio (OSNR) of the WDM channels co-propagating with the quantum signal is studied. The unique arrangement of the most advanced QKD and WDM technologies reported here constitutes, in our opinion, a world first, and demonstrates that QKD and WDM solutions can coexist in already deployed optical transport networks.

Quantum key distribution (QKD) enables secure communication by harnessing the fundamental principles of quantum physics, which inherently guarantee information‐theoretic security and intrinsic resistance to quantum computing attacks. However, the secure key rate of QKD typically decreases exponentially with increasing channel distance. In this work, through the development of a novel polarization‐state preparation method, an ultra‐low time‐jitter laser source, and superconducting nanowire single‐photon detectors, a 5‐GHz integrated QKD system featuring ultra‐low quantum bit error rates (QBERs) is demonstrated. The system achieves secure key rates of 1.076 Mbps at 150 km and 105 kbps at 200 km over standard single‐mode fiber channels, respectively. The system substantially enhances the secure key rate, enabling the implementation of high‐resolution video calls with one‐time‐pad encryption over intercity backbone QKD links. This work represents a significant step forward in the development of high‐performance practical QKD systems.

The modulation mode at the transmitters plays a crucial role in the continuous-variable measurement-device-independent quantum key distribution (CV-MDI-QKD) protocol. However, in practical applications, differences in the modulation schemes between two transmitters can inevitably impact protocol performance, particularly when using discrete modulation with four-state or eight-state formats. This work primarily investigates the effect of imbalanced modulation at the transmitters on the security of the CV-MDI-QKD protocol under both symmetric and asymmetric distance scenarios. By employing imbalanced discrete modulation maps and numerical convex optimization techniques, the proposed CV-MDI-QKD protocol achieves a notably higher secret key rate and outperforms existing protocols in terms of maximum transmission distance. Specifically, simulation results demonstrate that the secret key rate and maximum transmission distance are boosted by approximately 77.77% and 24.3%, respectively, compared to the original protocol. This novel and simplified modulation method can be seamlessly implemented in existing experimental setups without requiring equipment modifications. Furthermore, it provides a practical approach to enhancing protocol performance and enabling cost-effective applications in secure quantum communication networks under real-world environments.

In quantum key distribution (QKD), there are some security loopholes opened by the gaps between the theoretical model and the practical system, and they may be exploited by eavesdroppers (Eve) to obtain secret key information without being detected. This is an effective quantum hacking strategy that seriously threatens the security of practical QKD systems. In this paper, we propose a new quantum hacking attack on an integrated silicon photonic continuous-variable quantum key distribution (CVQKD) system, which is known as a power analysis attack. This attack can be implemented by analyzing the power originating from the integrated electrical control circuit in state preparation with the help of machine learning, where the state preparation is assumed to be perfect in initial security proofs. Specifically, we describe a possible power model and show a complete attack based on a support vector regression (SVR) algorithm. The simulation results show that the secret key information decreases with the increase of the accuracy of the attack, especially in a situation with less excess noise. In particular, Eve does not have to intrude into the transmitter chip (Alice), and may perform a similar attack in practical chip-based discrete-variable quantum key distribution (DVQKD) systems. To resist this attack, the electrical control circuit should be improved to randomize the corresponding power. In addition, the power can be reduced by utilizing the dynamic voltage and frequency scaling (DVFS) technology.