- Research Article
68
- 10.1016/j.optmat.2021.111011
From flexible electronics to flexible photonics: A brief overview
- Mar 23, 2021
- Optical Materials
- Giancarlo C Righini + 5 more +5
From flexible electronics to flexible photonics: A brief overview
This paper demonstrates the fabrication and measurements of flexible photonic lightwave circuits in glass substrates. Using temporally and spatially shaped ultrafast laser pulses, highly symmetrical and low-loss optical waveguides were written in flexible glass substrates with thicknesses ranging from 25 µm to 100 µm. The waveguide propagation loss, measured by optical frequency domain reflectometry, was 0.11 dB/cm at 1550 nm telecommunication wavelength. The bend loss of the waveguide is negligible at a radius of curvature of 1.5 cm or greater. Additionally, the waveguides are thermally stable up to 400°C. This paper presents alternatives to fabricating flexible photonics in traditionally used polymeric materials.
From flexible electronics to flexible photonics: A brief overview
From flexible electronics to flexible photonics: A brief overview
Synthesis of a fluorinated photoresist for optical waveguide devices
A linear fluorinated bis-phenol-A novolac resin (LFAR) for optical waveguide was synthesized based on 4,4′-(hexafluoro-isopropylidene)diphenol, epoxy chloropropane and formaldehyde. Negative fluorinated photoresist (FP) was made by composing the LFAR, diphenyl iodonium salt and solvent. The film, which was made by spin-coating FP, had good UV light lithograph sensitivity, large hardness and high glass transition temperature (T g >170°C, after crosslinking). Low-loss optical waveguides with very smooth top surface were fabricated from the resulting FP by direct UV exposure and chemical development. For waveguides without upper cladding, the propagation loss of the channel waveguides was measured to be 0.21 dB/cm at 1550 nm.
Read moreTextured (111) crystalline silicon thin film growth on flexible glass by e-beam evaporation
Textured (111) crystalline silicon thin film growth on flexible glass by e-beam evaporation
Flexible passive integrated photonic devices with superior optical and mechanical performance.
Flexible integrated photonics is a rapidly emerging technology with a wide range of possible applications in the fields of flexible optical interconnects, conformal multiplexing sensing, health monitoring, and biotechnology. One major challenge in developing mechanically flexible integrated photonics is the functional component within an integrated photonic circuit with superior performance. In this work, several essential flexible passive devices for such a circuit were designed and fabricated based on a multi-neutral-axis mechanical design and a monolithic integration technique. The propagation loss of the waveguide is calculated to be 4.2 dB/cm. In addition, we demonstrate a microring resonator, waveguide crossing, multimode interferometer (MMI), and Mach-Zehnder interferometer (MZI) for use at 1.55 µm, each exhibiting superior optical and mechanical performance. These results represent a significant step towards further exploring a complete flexible photonic integrated circuit.
Read moreUltra Thin Flexible Glass Substrates
New applications in the electronics market ranging from foldable displays in mobile phones to wearable displays in clothes generate a high demand for flexible materials especially for substrates. The upcoming OLED technology shows some advantages in comparison with conventional LCDs and enables real flexible or shaped displays. Moreover, the wearable displays have a barely need for flexible electronic circuits. At a first glance polymer foils are the materials of choice for flexible substrates and for electronic circuits but in general they suffer from thermal instability as well as from high permeation rates for gases and water and hence chemical stability of critical materials such as LC's or low work function materials. In contrast, even ultra thin glass sheets have excellent barrier properties and show sufficient bending properties if they are thinner than 100μm.Flexible glass substrates down to a thickness of 50μm have been developed. The deposition of an organic coating helps to overcome significantly the lack of mechanical stability. Therefore, our flexible glass substrates can be used in conventional display manufacturing processes which include several thin film process steps. Moreover, they are suited for production of flexible PCB's.
Read moreLow-loss passive polymer optical waveguides with high environmental stability
Deuterated polysiloxane with high transparency and high thermal stability was newly synthesized for use as optical waveguide material. Single-mode channel waveguides using the polymer were fabricated by conventional photolithography and dry etching. The propagation loss of the channel waveguides was measured and found to be 0.17 dB/cm at 1.31 /spl mu/m and 0.43 dB/cm at 1.55 /spl mu/m. The thermal and environmental stability of the waveguides was demonstrated by the fact that the propagation loss remained unchanged after tests at 200/spl deg/C for 30 min, at 120/spl deg/C for 1000 h, and at 75/spl deg/C and 90% RH for 1000 h.
Read moreTransient Radiation Effects in Low-Loss Optical Waveguides
Radiation-induced effects in low loss optical waveguides have been studied to determine parameters affecting the use of these materials in plasma diagnostic instrumentation operating in severe radiation environments. Radiation-induced luminescence of fibers was shown to result from the Cerenkov process occurring within the fibers. Both spectral data and angular dependence of luminescence were used to verify the Cerenkov effect. Absolute magnitude of luminescence data were obtained. Different fiber types were shown to exhibit comparable luminescence output. Radiation-induced absorption was measured immediately following a 40 ns radiation pulse at wavelengths of 600 nm and 800 nm. Saturation effects in absorption were observed as well as changes in fiber recovery vs time as a function of radiation dose. Step- and graded-index profile fibers were shown to exhibit comparable absorption. Fibers tested included plastic clad silica fibers, as well as graded- and step-index germanium-doped and boron-doped fibers. Plastic clad silica fibers exhibited much less radiation-induced absorption than any other fiber type. The data presented allow optical fiber data links to be designed for use in severe radiation environments where data transmission is required during, or shortly after, the radiation pulse.
Read moreLow-loss polymeric waveguides for co-packaged optics on glass substrates
In this study, we demonstrate photonic resonators by integrating polymeric waveguides using cost-effective ultraviolet (UV) contact lithography on glass substrates. Low-loss waveguides are realized while the quality (Q) factor of waveguide resonators can be up to 105. Employing the glass substrate effectively reduces optical power leakage and lowers the cost of a thick buried SiO2 layer compared to the conventional silicon substrate. Uniform, high extinction, single-mode resonances are identified within a broad spectrum (1540–1560 nm) in the telecommunication band. In addition, a hybrid waveguide platform integrating both polymers and dielectric Si3N4 is introduced on the glass substrates, offering the potential for enhanced optical confinement and a smaller device footprint. A comparable Q factor of approximately 105 is again achieved using etch-free processes and µm-scale UV contact lithography. This demonstration highlights the potential for a simple, fast, low-thermal budget configuration of high-quality glass-based photonics, which is advantageous for future co-packaged photonics on glass interposers.
Read moreHighly Efficient Flexible Perovskite Solar Cells with Antireflection and Self-Cleaning Nanostructures.
Flexible thin film solar cells have attracted a great deal of attention as mobile power sources and key components for building-integrated photovoltaics, due to their light weight and flexible features in addition to compatibility with low-cost roll-to-roll fabrication processes. Among many thin film materials, organometallic perovskite materials are emerging as highly promising candidates for high efficiency thin film photovoltaics; however, the performance, scalability, and reliability of the flexible perovskite solar cells still have large room to improve. Herein, we report highly efficient, flexible perovskite solar cells fabricated on ultrathin flexible glasses. In such a device structure, the flexible glass substrate is highly transparent and robust, with low thermal expansion coefficient, and perovskite thin film was deposited with a thermal evaporation method that showed large-scale uniformity. In addition, a nanocone array antireflection film was attached to the front side of the glass substrate in order to improve the optical transmittance and to achieve a water-repelling effect at the same time. It was found that the fabricated solar cells have reasonable bendability, with 96% of the initial value remaining after 200 bending cycles, and the power conversion efficiency was improved from 12.06 to 13.14% by using the antireflection film, which also demonstrated excellent superhydrophobicity.
Read moreSemiconductor nanomembranes for stacked and flexible photonics
Crystalline semiconductor nanomembranes (NMs), which are transferable, stackable, bondable and manufacturable, offer unprecedented opportunities for unique and novel device applications. We report here nanophotonic devices based on stacked semiconductor NMs on Si, glass and flexible PET substrates. Photonic crystal Fano resonance-based surface-normal optical filters and broadband reflectors have been demonstrated with unique angle and polarization properties. Flexible photodetectors and solar cells have also been developed based on the NM stacking processes. Such NM stacking process can lead to a paradigm shift on silicon photonic integration and inorganic flexible photonics.
Read moreRoll-to-roll sputter deposition on flexible glass substrates
Roll-to-roll sputter deposition on flexible glass substrates
Highly transparent, flexible and hydrophilic ZnS thin films prepared by a facile and environmentally friendly chemical bath deposition method
Highly transparent, flexible and hydrophilic ZnS thin films prepared by a facile and environmentally friendly chemical bath deposition method
Read moreUHF RFCPUs on Flexible and Glass Substrates for Secure RFID Systems
A radio frequency integrated circuit (RFIC) tag consisting of an 8 bit CPU, a 4 kB ROM, a 512B SRAM, and an RF circuit, which communicates using 915 MHz UHF RF signals, has been developed on both a flexible substrate and a glass substrate. Each of the RFIC tags employs a single DES and an anti-side channel attack routine in firmware for secured communication, and occupies an area of 10.5 mm in width and 8.9 mm in height. The RFIC tag on the flexible substrate is 145 mum thick and weighs 262 mg, and the RFIC tag on the glass substrate consumes 0.54 mW at a power supply voltage of 1.5 V and communicates with a maximum range of 43 cm at a power of 30 dBm. The high-performance poly-silicon TFT technology on flexible substrate and glass substrate of 0.8 mum design rule, and a gate plus one metal layer are used for fabrication. The RFIC tag realizes stable internal clock generation and distribution by a digital control clock generator and a two-phase nonoverlap clock scheme, respectively.
Read moreUltra-Low-Loss PECVD SiN Photonic Platforms At Telecom Wavelengths: Comparison Between Modeling and Experimental Results
This article aims to identify the key parameters controlling optical propagation losses in PECVD SiN waveguides (WG) at telecom wavelengths and to provide guidance for achieving ultra-low-loss photonic platforms, both with and without thermal-budget constraints. To this end, the contribution of bulk material loss to the total propagation loss is evaluated by systematically comparing experimental loss measurements with surface-scattering losses predicted by the Payne and Lacey model, which incorporates robust experimental measurements of the roughness parameters (unbiased roughness amplitude and correlation length). Several parameters are investigated: the physico-chemical properties of the PECVD SiN (more or less Si-rich) and of the SiO <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$_{2}$</tex-math></inline-formula> capping, the sidewalls roughness parameters of the patterned SiN WGs and the impact of an annealing process on the materials properties and consequently on the optical losses. The SiN patterning uses state-of-the art 300mm tools and results in low roughness parameters (LER=2.1nm and correlation length of 78nm) enabling the lowest reported losses at 1.31 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\mathrm{\mu }$</tex-math></inline-formula> m for PECVD SiN (0.34dB/cm). However, the Payne and Lacey model predicts that reducing the correlation length down to 30nm while keeping low roughness amplitude would offer the possibility to reach sub-0.2 -0.1dB/cm loss if all material loss are suppressed. At 1.55 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\mathrm{\mu }$</tex-math></inline-formula>m, the PECVD SiN used in this work contain too many absorbing centers (NH, SiH) to achieve sub 1dB/cm losses. Annealing PECVD SiN at 1100°C allows the removal of SiH and NH absorption sites, thus enabling ultra-low losses of 0.18–0.24 dB/cm at 1.31 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\mathrm{\mu }$</tex-math></inline-formula>m. However, the annealing introduces also some new defects (Si-Si nanoclusters for Si-rich SiN and N dangling bonds for N-rich SiN) that introduces some unwanted loss at 1.55 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$\mathrm{\mu }$</tex-math></inline-formula>m.
Read moreFlorinated polyimide for low-loss optical waveguides at 1.55μ m
Fluorinated polyimide (FPI) is an attractive material for fabricating low-loss optical waveguides at 1.55 micrometers , because of its superior optical and thermal properties. Although FPI planar lightwave circuits (PLCs) are usually fabricated on silicon substrate, such PLCs exhibit relatively high polarization dependence and high transmission loss compared with those of silica PLCs. Use of an FPI substrate overcomes these problems that mainly originate from the difference in thermal expansion coefficient between FPI and silicon. It improves the optical property of FPI waveguides, e.g., the transmission loss and polarization dependent loss for straight waveguides reduce to less than 0.3 dB/cm and 0.1 dB, respectively, in the 1.55-micrometers band. The use of FPI substrates will enable the fabrication of high-optical-quality FPI PLCs such as 1x8 splitters.
Read more