Flood Susceptibility Assessment Using Novel Ensemble of Hyperpipes and Support Vector Regression Algorithms

Flooding is a recurrent hazard occurring worldwide, resulting in severe losses. The preparation of a flood susceptibility map is a non-structural approach to flood management before its occurrence. With recent advances in artificial intelligence, achieving a high-accuracy model for flood susceptibility mapping (FSM) is challenging. Therefore, in this study, various artificial intelligence approaches have been utilized to achieve optimal accuracy in flood susceptibility modeling to address this challenge. By incorporating the grey wolf optimizer (GWO) metaheuristic algorithm into various models—including recurrent neural networks (RNNs), support vector regression (SVR), and extreme gradient boosting (XGBoost)—the objective of this modeling is to generate flood susceptibility maps and evaluate the variation in model performance. The tropical Manimala River Basin in India, severely battered by flooding in the past, has been selected as the test site. This modeling utilized 15 conditioning factors such as aspect, enhanced built-up and bareness index (EBBI), slope, elevation, geomorphology, normalized difference water index (NDWI), plan curvature, profile curvature, soil adjusted vegetation index (SAVI), stream density, soil texture, stream power index (SPI), terrain ruggedness index (TRI), land use/land cover (LULC) and topographic wetness index (TWI). Thus, six susceptibility maps are produced by applying the RNN, SVR, XGBoost, RNN-GWO, SVR-GWO, and XGBoost-GWO models. All six models exhibited outstanding (AUC above 0.90) performance, and the performance ranks in the following order: RNN-GWO (AUC: 0.968) > XGBoost-GWO (AUC: 0.961) > SVR-GWO (AUC: 0.960) > RNN (AUC: 0.956) > XGBoost (AUC: 0.953) > SVR (AUC: 0.948). It was discovered that the hybrid GWO optimization algorithm improved the performance of three models. The RNN-GWO-based flood susceptibility map shows that 8.05% of the MRB is very susceptible to floods. The modeling found that the SPI, geomorphology, LULC, stream density, and TWI are the top five influential conditioning factors.

Remotely sensed air temperature data from NASA POWER are widely used in regions with scarce climatic observations, particularly for agricultural applications such as calculating crop water requirements. This study employed a suite of machine learning (ML) algorithms to correct biases in NASA POWER air temperature outputs, including multiple support vector regression (SVR) variants—Linear SVR, Quadratic SVR, Cubic SVR, Fine Gaussian SVR, Medium Gaussian SVR, Coarse Gaussian SVR—and ensemble decision tree models: bagged trees (BGT) and boosted trees (BT). The objective of this study was to assess the ability of different ML algorithms to reduce biases in NASA POWER air temperature data, with the broader goal of identifying the most suitable ML method for air temperature bias correction in Nigeria. For this analysis, we used daily air temperature records from seven meteorological stations across diverse regions of Nigeria. The performance of NASA POWER minimum and maximum air temperature datasets was evaluated using standard error metrics. Subsequent application of ML algorithms significantly improved data accuracy: the normalized root mean square error (NRMSE) of the corrected outputs was mostly below 10%, indicating excellent predictive performance when ML was integrated. Among the SVR variants tested, Fine Gaussian SVR consistently yielded the best prediction results. This finding suggests that Fine Gaussian SVR is a robust tool for enhancing the reliability of air temperature data—critical for improving the accuracy of crop water requirement calculations in regions where in-situ air temperature observations are limited.

Malaysia, particularly Pahang, experiences devastating floods annually, causing significant damage. The objective of the research was to create a flood susceptibility map for the designated area by employing an Ensemble Machine Learning (EML) algorithm based on geographic information system (GIS). By analyzing nine key factors from a geospatial database, flood susceptibility map was created with the ArcGIS software (ESRI ArcGIS Pro v3.0.1 x64). The Random Forest (RF) model was employed in this study to categorize the study area into distinct flood susceptibility classes. The Feature selection (FS) method was used to ranking the flood influencing factors. To validate the flood susceptibility models, standard statistical measures and the Area Under the Curve (AUC) were employed. The FS ranking demonstrated that the primary attributes to flooding in the study region are rainfall and elevation, with slope, geology, curvature, flow accumulation, flow direction, distance from the river, and land use/land cover (LULC) patterns ranking subsequently. The categories of ’very high’ and ’high’ class collectively made up 37.1% and 26.3% of the total area, respectively. The flood vulnerability assessment of Pahang found that the Eastern, Southern, and central regions were at high risk of flooding due to intense precipitation, low-lying topography with steep inclines, proximity to the shoreline and rivers, and abundant flooded vegetation, crops, urban areas, bare ground, and rangeland. Conversely, areas with dense tree canopies or forests were less susceptible to flooding in this research area. The ROC analysis demonstrated strong performance on the validation datasets, with an AUC value of >0.73 and accuracy scores exceeding 0.71. Research on flood susceptibility mapping can enhance risk reduction strategies and improve flood management in vulnerable areas. Technological advancements and expertise provide opportunities for more sophisticated methods, leading to better prepared and resilient communities.

Environmental data mining and modeling based on machine learning algorithms and geostatistics

Floods represent the most frequent natural hazard, generating significant impacts on people as well as considerable economic and environmental losses worldwide. These events are particularly exacerbated by extreme climatic phenomena, such as the 2017 Coastal El Niño, the most intense in the past century, with the Piura region of Peru being the most affected. Flood susceptibility mapping (FSM) are essential for mitigating the negative impacts of floods through land-use planning, policy and plan formulation, and fostering community resilience for the sustainable occupation and use of floodplains. This study aimed to develop FSM in northern Peru, particularly in the Piura region, using a hybrid methodology integrating optical and radar remote sensing (RS), GIS, and machine learning (ML) techniques. Sentinel-1 data were used to map flood extent using the Normalized Difference Flood Index (NDFI), while flood susceptibility was modeled using ten topographic variables (derived from a DEM), the Normalized Difference Vegetation Index (NDVI), geology, and geomorphology; issues related to correlation and multicollinearity among topographic variables were addressed through Principal Component Analysis (PCA), selecting four principal components that explained 75.4% of the variance. Six FSMs were generated using Support Vector Machine (SVM) and Random Forest (RF), combined with different methods to estimate the quantitative relationship between variables and flood occurrence: Quantiles (q), Frequency Ratio (FR), and Weights of Evidence (WoE) (SVM-q, SVM-FR, SVM-WoE, RF-q, RF-FR, and RF-WoE). Model validation was performed using metrics such as the Area Under the ROC Curve (AUC), F1-score, and Accuracy, along with a cross-validation analysis. The results revealed that the RF ensemble model with WoE (RF-WoE) exhibited the best performance (AUC = 0.988 in training and >0.907 in validation), outperforming the SVM-based models; the SHAP analysis confirmed the significance of geology, geomorphology, and aspect in flood prediction. The resulting susceptibility maps identified the lower Piura River basin as the most vulnerable area, particularly during the 2017 Coastal El Niño event, due to morphological factors and inadequate land occupation. This study contributes to the field by demonstrating the effectiveness of a hybrid methodology that combines PCA, machine learning, and SHAP analysis, providing a more robust and interpretable approach to flood susceptibility mapping. Finally, the findings provide valuable inputs for local authorities, decision-makers, and organized communities to strengthen resilience, reduce vulnerability, and enhance preparedness against future floods, while also supporting the formulation of public policies and the integration of flood susceptibility into land-use planning for sustainable territorial management.

This study responds to the growing concern about flooding and its consequences, particularly in areas prone to severe meteorological events, by employing an innovative approach to identify flood susceptibility in Kayseri. The methodology combines machine learning (ML) algorithms, namely extreme gradient boosting (XGB), categorical boosting (CB), and gradient boosting (GB), with hyperparameter optimization strategies through a hybridization process utilizing the energy valley optimizer technique. A total of 6000 data points were designated for the purposes of training, testing, and validation. In order to create these models, a total of nine variables, which have been identified as influential factors in the occurrence of floods, were selected based on data availability and a review of the relevant literature. It is noteworthy that elevation and rainfall were identified as pivotal predictors across all models. The CB model demonstrated robust predictive accuracy, with a substantial majority of instances correctly classified. The AUC values for the XGB and GB models remain notably high at 0.98, indicating robust predictive power and generalization capabilities. In the test phase, the AUC values underscore the superior performance of the XGB (0.9763) and GB (0.9739) models, with the CB model also demonstrating robust results at 0.9677. This study introduces a novel approach to flood susceptibility mapping by utilizing a range of ML methods. Its key innovations lie in the superior performance of these algorithms compared to traditional methods, as well as their inherent flexibility and heuristic capabilities. The generated flood susceptibility maps offer a detailed insight into the spatial distribution of flood susceptibility, with significant implications for urban planning and disaster preparedness.

Flood susceptibility mapping: Integrating machine learning and GIS for enhanced risk assessment

Predicting intraurban PM2.5 concentrations using enhanced machine learning approaches and incorporating human activity patterns

A flood is a natural catastrophe that causes heavy damage not only to people but also to properties. To prevent and mitigate flood damage, an accurate flood susceptibility map that reveals highly potential flood-prone areas is essential. This study aims to construct flood susceptibility maps in the Huong Khe district using three machine learning algorithms, namely the K - Nearest Neighbour (KNN), the Support Vector Machine (SVM) and Artificial Neural Network (ANN). Training and testing datasets were extracted from Sentinel-1 SAR images. Seven causative factors were selected as input for predictive models after removing high-correlation factors and unimportant factors through a rigorous screening process by analyzing the Pearson correlation coefficient (PCC) and calculating the information gain ratio (InGR). The model's hyperparameters were found by grid search algorithm integrated 5-fold cross-validation. The three optimal flood susceptibility models showed excellent performance, with very high accuracy indices in the training and testing phases, over 90% of overall accuracy and UAC values. High and very high susceptibility classes on flood susceptibility maps accounted for around 18% of the total study area and were mainly located in residential and agricultural areas. Thus, there is a need to make proper land use planning for these areas to reduce damage in flood seasons.

This observation-based and explainable approach demonstrates the applicability of multi-source remote sensing for flood assessment in data-scarce regions, offering a robust scientific basis for flood management and spatial planning in monsoon-affected areas. Floods are among the most frequent and devastating natural hazards, particularly in developing countries such as Myanmar, where monsoon-driven rainfall and inadequate flood-control infrastructure exacerbate disaster impacts. This study presents a satellite-driven and interpretable framework for high-resolution flood susceptibility and risk assessment by integrating multi-source remote sensing and geospatial data with ensemble machine-learning models—Extreme Gradient Boosting (XGBoost) and Light Gradient Boosting Machine (LightGBM)—implemented on the Google Earth Engine (GEE) platform. Eleven satellite- and GIS-derived predictors were used, including the Digital Elevation Model (DEM), slope, curvature, precipitation frequency, the Normalized Difference Vegetation Index (NDVI), land-use type, and distance to rivers, to develop flood susceptibility models. The Jenks natural breaks method was applied to classify flood susceptibility into five categories across Myanmar. Both models achieved excellent predictive performance, with area under the receiver operating characteristic curve (AUC) values of 0.943 for XGBoost and 0.936 for LightGBM, effectively distinguishing flood-prone from non-prone areas. XGBoost estimated that 26.1% of Myanmar’s territory falls within medium- to high-susceptibility zones, while LightGBM yielded a similar estimate of 25.3%. High-susceptibility regions were concentrated in the Ayeyarwady Delta, Rakhine coastal plains, and the Yangon region. SHapley Additive exPlanations (SHAP) analysis identified precipitation frequency, NDVI, and DEM as dominant factors, highlighting the ability of satellite-observed environmental indicators to capture flood-relevant surface processes. To incorporate exposure, population density and nighttime-light intensity were integrated with the susceptibility results to construct a natural–social flood risk framework. This observation-based and explainable approach demonstrates the applicability of multi-source remote sensing for flood assessment in data-scarce regions, offering a robust scientific basis for flood management and spatial planning in monsoon-affected areas.

Assam is highly susceptible to frequent flooding, which significantly affects socio-economic conditions. Despite the widespread application of Geographic Information System (GIS) based Analytical Hierarchy Process (AHP) models for flood susceptibility assessment, there remains a lack of micro-spatial analyses focused on semi-urban and rural fringe regions such as Dimoria Block. Existing regional-scale assessments often overlook local variations in topography, land cover, and hydrological conditions, limiting their applicability for site-specific planning. The present study integrates GIS and AHP to delineate flood susceptibility zones in Dimoria Block using eleven flood-conditioning parameters. Multicollinearity analysis was conducted, followed by weighted overlay and sensitivity analyses. Rainfall and land use/land cover (LULC) emerged as the most influential factors. The results indicate that 54.75% of the study area falls within the high flood susceptibility zone, 36.72% within the moderate zone, and 8.52% within the low zone. The final flood susceptibility map was validated using both quantitative and qualitative approaches. The receiver operating characteristic (ROC) analysis yielded an area under the curve (AUC) value of 0.936, indicating high predictive accuracy. Validation using field surveys and official flood records further supports the robustness of the model. This study presents a localized flood susceptibility assessment framework for Dimoria Block and demonstrates the applicability of GIS–AHP approaches in data-scarce environments. The findings provide useful inputs for flood mitigation planning, land-use management, and disaster risk reduction strategies at the local level.

The steel industry has been forced to switch from the traditional blast furnace to the electric arc furnace (EAF) process to reduce carbon emissions. However, EAF still relies entirely on the operators’ proficiency to determine the electrical power input. This study aims to enhance the efficiency of the EAF process by predicting the tap temperature in real time through a data-driven approach and by applying a system that automatically sets the input amount of power to the production site. We developed a tap temperature prediction model (TTPM) with a machine learning (ML)-based support vector regression (SVR) algorithm. The operation data of the stainless EAF, where the actual production work was carried out, were extracted, and the models using six ML algorithms were trained. The model validation results show that the model with an SVR radial basis function (RBF) algorithm resulted in the best performance with a root mean square error (RMSE) of 20.14. The SVR algorithm performed better than the others for features such as noise. As a result of a five-month analysis of the operating performance of the developed TTPM for the stainless EAF, the tap temperature deviation decreased by 17% and the average power consumption decreased by 282 kWh/heat compared with the operation that depended on the operator’s skill. In the results of the economic evaluation of the facility investment, the economic feasibility was found to be sufficient, with an internal rate of return (IRR) of 35.8%. Applying the developed TTPM to the stainless EAF and successfully operating it for ten months verified the system’s reliability. In terms of the increasing proportion of EAF production used to decarbonize the steel industry, it is expected that various studies will be conducted more actively to improve the efficiency of the EAF process in the future. This study contributes to the improvement of steel companies’ manufacturing competitiveness and the carbon neutrality of the steel industry by achieving the energy and production efficiency improvements associated with the EAF process.

Flood is one of the most commonly occurred natural hazards worldwide. Severe flood occurrences in Kelantan, Malaysia cause damage to both life and property every year. Due to the huge losses in this area, development of appropriate flood modeling is required for the government. Remote sensing and geographic information system techniques can support overall flood management as they can produce rapid data collection and analysis for hydrological studies. The existing models for flood mapping have some weak points that may improve through more sophisticated and ensemble methods. The current research aimed to propose a novel ensemble method by integrating support vector machine (SVM) and frequency ratio (FR) to produce spatial modeling in flood susceptibility assessment. In the literature, mostly statistical and machine learning methods are used individually; however, their integration can enhance the final output. The FR model can perform bivariate statistical analysis and evaluate the correlation between the flooding and classes of each conditioning factors. The weights achieved by FR can be assigned to each conditioning factor and the resulted factors can be used in SVM analysis. In order to examine the efficiency of the proposed ensemble method and to show the proficiency of SVM, another machine learning algorithm such as decision tree (DT) was applied and the results were compared. To perform the methods, the upper catchment of the Kelantan basin in Malaysia was chosen. First, a flood inventory map with a total of 155 flood locations were extracted from various sources over the study area. The flood inventory map was randomly divided into two dataset; 70 % (115 flood locations) for the purpose of training and the remaining 30 % (40 flood locations) was used for validation. The spatial database included digital elevation model, curvature, geology, river, stream power index, rainfall, land use/cover, soil type, topographic wetness index and slope. For model validation, area under curve method was used and both success and prediction rate curves were calculated. The validation results for ensemble method showed 88.71 and 85.21 % for success rate and prediction rate respectively. The DT model showed 87.00 and 82.00 % for the success rate and prediction rate respectively. It is evident that the accuracies were increased using the ensemble method. The acquired results proved the efficiency of the proposed ensemble method as rapid, accurate and reasonable in flood susceptibility assessment.

Accurate leaf area index estimation in sorghum using high-resolution UAV data and machine learning models

Purpose This study aimed to establish an optimal model to predict the busulfan (BU) area under the curve at steady state (AUCss) by using machine learning (ML). Patients and methods Seventy-nine adult patients (age ≥18 years) who received BU intravenously and underwent therapeutic drug monitoring from 2013 to 2021 at Fujian Medical University Union Hospital were enrolled in this retrospective study. The whole dataset was divided into a training group and test group at the ratio of 8:2. BU AUCss were considered as the target variable. Nine different ML algorithms and one population pharmacokinetic (pop PK) model were developed and validated, and their predictive performance was compared. Results All ML models were superior to the pop PK model (R2 = 0.751, MSE = 0.722, 14 and RMSE = 0.830) in model fitting and had better predictive accuracy. The ML model of BU AUCss established through support vector regression (SVR) and gradient boosted regression trees (GBRT) had the best predictive ability (R2 = 0.953 and 0.953, MSE = 0.323 and 0.326, and RMSE = 0.423 and 0.425). Conclusion All the ML models can potentially be used to estimate BU AUCss with the aim of facilitating rational use of BU on the individualized level, especially models built by SVR and GBRT algorithms.