Formula omitted] regularity properties of singular parameterizations in isogeometric analysis

Interface solutions of partial differential equations with point singularity

ABSTRACTIn the recent project BENCHOP – the BENCHmarking project in Option Pricing we found that Stochastic and Local Volatility problems were particularly challenging. Here we continue the effort by introducing a set of benchmark problems for this type of problems. Eight different methods targeted for the Stochastic Differential Equation (SDE) formulation and the Partial Differential Equation (PDE) formulation of the problem, as well as Fourier methods making use of the characteristic function, were implemented to solve these problems. Comparisons are made with respect to time to reach a certain error level in the computed solution for the different methods. The implemented Fourier method was superior to all others for the two problems where it was implemented. Generally, methods targeting the PDE formulation of the problem outperformed the methods for the SDE formulation. Among the methods for the PDE formulation the ADI method stood out as the best performing one.

THB-splines: An effective mathematical technology for adaptive refinement in geometric design and isogeometric analysis

PetIGA: A framework for high-performance isogeometric analysis

The finite volume method in the context of the finite element method

A comparison of differential quadrature methods for the solution of partial differential equations

Several research papers experimentally validated the derived theoretical solution of the partial differential equation (PDE) of Transient Land Drainage (TLD) using laboratory sand tanks, Hele-Shaw models, resistance networks, and field data. In this research, the main objective is to use an Arduino microcontroller linked with the LabVIEW software to derive experimentally-by using an RC analog circuit connected to the Arduino microcontroller - a solution to Kirchhoff’s partial differential equation describing the unsteady electrical flow through the RC circuit. The RC circuit electrically simulates a non-dimensional virtual aquifer for which an experimental Fourier sine series solution in terms of the analog components is to be derived and used for comparison with the theoretical Fourier sine series solution of the transient partial differential equation of land drainage. The derived Fourier sine series solution of the partial differential equation governing the unsteady electrical flow through the RC analog is written in a non-dimensional form to enable its general application to the case study of this research. Isochrones of the water table drawdown based on those derived from the analog solution are similar in trend and behavior to those of the theoretical solution, indicating that both Fourier solutions are physically and mathematically identical.

Numerical convective schemes based on accurate computation of space derivatives

This paper explores the solutions of certain fractional partial differential equations using two methods; the first method involves separation of variables, which is a common technique for solving partial differential equations. However, since many equations cannot be separated in this way, the tensor product of Banach spaces method is applied to find the atomic solutions. To solve the resulting ordinary differential equations, the reproducing Kernel Hilbert space method is used to find numerical solutions, which are then used to find the numerical solution of the partial differential equation. The residual errors indicate that this method is effective and powerful. In summary, this paper presents a study on the solutions of certain fractional partial differential equations using two methods and demonstrates the effectiveness of these methods in finding numerical solutions.

This article is devoted to the numerical simulation of transient heat conduction problems in fluids. A numerical formulation depending on isogeometric analysis-based GeoPDE's toolbox is employed to establish the viability of isogeometric analysis as a tool for analysing heat conduction problems. An experimental analysis is conducted on a physical model of a container for checking the change in temperature with time. Then the isogeometric analysis is used for the development of a numerical model and evaluation of unknown field variable, that is, temperature and its dependent properties. The validation of the proposed model is done by comparing it with an experimental analysis and calculating the coefficient of correlation between the two models. As a result, +0.99 value of correlation coefficient is devious out, which presents a positive relationship between the two. Based on the validated results, the proposed model is employed for the evaluation of thermophysical properties for different fluids like liquid water and ethylene glycol–water mixture. The evaluated properties of ethylene glycol–water solution are compared with existing literature values. A root mean square error is compared between evaluated and literature property values for various concentrations. The deduced values are in the range of 2.3%–8.4% for density and 0.26%–4.6% for viscosity. It is found that isogeometric analysis can be effectively applied in heat conduction problems using GeoPDE.

We present an algorithm for fast generation of quasi-uniform and variable-spacing nodes on domains whose boundaries are represented as computer-aided design (CAD) models, more specifically non-uniform rational B-splines (NURBS). This new algorithm enables the solution of partial differential equations within the volumes enclosed by these CAD models using (collocation-based) meshless numerical discretizations. Our hierarchical algorithm first generates quasi-uniform node sets directly on the NURBS surfaces representing the domain boundary, then uses the NURBS representation in conjunction with the surface nodes to generate nodes within the volume enclosed by the NURBS surface. We provide evidence for the quality of these node sets by analyzing them in terms of local regularity and separation distances. Finally, we demonstrate that these node sets are well-suited (both in terms of accuracy and numerical stability) for meshless radial basis function generated finite differences discretizations of the Poisson, Navier-Cauchy, and heat equations. Our algorithm constitutes an important step in bridging the field of node generation for meshless discretizations with isogeometric analysis.

A simple four-unknown shear and normal deformations theory for functionally graded isotropic and sandwich plates based on isogeometric analysis

Aiming at the heat conduction equation, the heat conduction model is a very typical example of the partial differential equation. This paper focuses on the development and preliminary knowledge of the partial differential equation, the establishment of the heat conduction model and the solution of the heat conduction model. The partial differential equation with fractional Laplace operator is a kind of typical fractional partial differential equation, which has important applications in the fields of science and engineering. Fractional Laplace operator is a kind of nonlocal quasi-differential operator, which is the infinitesimal generator of L é vy steady-state process. It is essentially different from the classical Laplace operator, which leads to the disappearance of some classical properties, which generally brings difficulties to the study of this kind of problems. It is very difficult to solve the explicit solution of partial differential equation with fractional Laplace operator. In order to improve the accuracy and speed of solving partial differential equation, a high precision method for solving partial differential equation based on deep learning network is proposed. A multilayer radial basis function neural network is constructed and its structural layers are determined. By introducing subnetworks into each layer of the multilayer radial basis function neural network, a composite multilayer radial basis function neural network is constructed to improve the real function approximation performance and operation accuracy of the multilayer radial basis function neural network. The high-precision compound multi-layer radial basis function neural network is used to solve the partial differential equation. By giving a specific example of solving the partial differential equation, the solution effect of the method is tested. The results show that the method has very high solution accuracy under the four-layer network structure, which can improve about 1.5 orders of magnitude compared with the first layer. Under different number of training samples, it has higher solution accuracy and speed, and the comprehensive performance is superior. Therefore, it is a practical but challenging work to study the existence of solutions of partial differential equations with fractional Laplace operators. This paper mainly describes the research progress and trends of the existence of solutions of several classes of partial differential equations with fractional Laplace operators, including some of the work done by the author in this field in recent years.

The fractional partial differential equation is an equation with non-integer partial derivative which is now widely used in solving various problems so that in recent years, many researchers are interested to study fractional partial differential equation. The equation which is used in this paper is the non-homogeneous fractional partial differential equation. The aim of this study is to determine general solution of the partial differential equation through three different order equations (α; 1), (β; 2) and (α; β), where 0 < α ≤ 2 and 0 < β ≤ 1 by using Homotopy Analysis Method (HAM). Furthermore, by taking a convergent sequence, it will be analyzed that the convergence of the sequence of differential equations results in the sequence of solutions of partial fractional non-homogeneous partial differential equations converging to the solution function of the fractional partial differential equation.

The problem of parallel solution of partial differential equations with the help of the method of lines that ensures the reduction of the initial problem to the Cauchy problem described by a system of ordinary differential equations is considered. As a basic method, collocated multi-step block difference schemes are proposed. Obtaining a numerical solution in this case becomes possible only with the use of high-performance computing, usually with parallel architecture. This problem becomes especially important in the implementation of mathematical models based on systems of partial differential equations when it comes to the need for discretization of the solution search area, which can be significantly complicated by the geometric configuration of the boundaries. Solution of systems of this order cannot be obtained without involving multiprocessor computers. But by simply increasing the processing power, this problem cannot be solved. Only by combining the advantages of supercomputers and modern numerical simulation methods we can expect a significant improvement in the numerical solution of partial differential equations (PDEs).