Frequency Resource Allocation and Interference Management in Mobile Edge Computing for an Internet of Things System

LoRaWAN based internet of things (IoT) system for precision irrigation in plasticulture fresh-market tomato

SummaryWith the development of 5G technology, the Internet of Things (IoT) system is becoming more and more widely used in various fields. However, the reliability issue still hinders the wide applications. For instance, the transmission reliability of the IoT system will be significantly affected by the status of end devices, wireless channel quality, and the environment. Moreover, according to the Automatic Repeat‐reQuest (ARQ) retransmission mechanism in the 802.15.4 protocol, if the IoT end devices pursue a conservative power model causing low signal transmission power, it is likely that the signal power will lose too much during the transmission process. This will result in the increase of the network packet loss rate and the power consumption during the data retransmission. To solve this problem, this paper proposes a reasonable transmission power allocation algorithm to ensure the transmission reliability, considering the ARQ retransmission mechanism. The algorithm intends to find the optimal transmission power of each IoT end device, so as to minimize the total energy consumption. The simulation results demonstrate that the power allocation algorithm improves the reliability of the IoT system, compared with other algorithms.

Herein, an Internet of Things (IoT) system with remote reconfigurable wireless sensor network (WSN) nodes is presented and its application to measure group work activity in a classroom is discussed. This IoT system consists of wiki pages, bots, (defined as remotely controlled devices), gateways, and remotely reconfigurable WSN Nodes. The bots/gateways and WSN nodes of the IoT system are controlled by scripts written on wiki pages that are read by the bot/gateways, which then forward the commands contained in the scripts to the WSN nodes. Each WSN node then executes the commands, obtains the resulting sensor values, and then returns those values to the bot/gateways. The bot/gateways relay the values and write them onto the wiki page. Each WSN node is flexible and reconfigurable because its behavior can be changed by the script commands written onto the wiki page. Using this IoT system, we created a measurement system to evaluate activity levels of group work in a classroom. After developing the measurement system, we found it was possible to adjust the sampling rate for obtaining sensor values simply by rewriting the script on the wiki page without directly manipulating the WSN.

Internet of Things (IoT) systems are characterized by being highly heterogeneous, distributed, and scalable, made up of a variety of devices that operate in uncertain and ubiquitous settings. In this sense, models@runtime emerges as a promising software development approach to address IoT systems’ intrinsic characteristics. This study presents a systematic review to know the state of the art using of models@runtime to support IoT systems’ operation. The methodology proposed by Kitchenham has been used to carry out this research. The systematic review answers the following research questions: i) How are models@runtime being used in the IoT domain? And ii) How is addressed the research in studies related to the use of models@runtime in the IoT domain? Initially, 692 primary studies were retrieved, where 50 relevant studies related to approaches based on models@runtime for IoT were selected after applying the corresponding inclusion and exclusion criteria. Those primary studies were classified based on the extraction criteria. Among review’s main results are that the models@runtime have been widely used to support the monitoring and self-adaptation mechanisms in IoT systems, as opposed to the few studies found aimed at interoperability, quality assurance, self-organization, and self-optimization of IoT systems, consisting of essential research opportunities.

Privacy preservation in blockchain based IoT systems: Integration issues, prospects, challenges, and future research directions

A survey of trust computation models for service management in internet of things systems

Commonly, an Internet of Things (IoT) system follows the architecture of the Cloud‐centric Internet of Things (CIoT) in which the physical objects are represented in the form of Web resources that are managed by the servers in the global Internet. In general, the common IoT system involves three major technologies: embedded systems, middleware, and cloud services. Although the CIoT model is a common approach to implement IoT systems, it is facing the growing challenges in IoT. This chapter discusses foundations of computing paradigms for realizing emerging IoT applications, especially fog and edge computing, their background, characteristics, architectures and open challenges. It presents related technologies to fog and edge computing. The chapter describes how fog and edge can improve CIoT and explains the hierarchy of fog and edge computing environments. It illustrates the business models of fog and edge computing, and provides the information regarding the opportunities and challenges in fog and edge computing.

This chapter discusses the architecture of Internet of Things (IoT) systems. IoT system security takes a team of experts in network security, computer security, hardware and software security, cloud infrastructure security, secure protocols, and cryptography. The security of an IoT system is extremely complex and crosses many security disciplines. Various industries and standards groups have developed and proliferated system architectures in order to better communicate the issues and requirements relating to systems for which they are concerned. The Internet of Things community is no different from any other architectural community. The primary difference is that IoT spans many different industries and ecosystems, and has a diverse set of concerns. The cloud is essential to an IoT system because it houses centralized applications and contains the data model of the IoT system, making those applications accessible to its users wherever they are, and is wholly independent of the actual location of the IoT devices themselves.

With the continuous development of the Internet of Things (IoT) and the needs of the times, the number of IoT edge devices is rapidly increasing, and to be able to provide users with more reliable information services and decision-making, this paper constructs an IoT system based on cloud-edge collaboration. Based on cloud-edge collaboration, data mining technology is used to categorize data, and regression models and branch neural networks are combined to further improve the IoT system based on cloud-edge collaboration. Finally, the particle swarm algorithm is used to optimize reinforcement learning, and the framework of an IoT system built on cloud-edge partnership is established. Through the data processing experiments on IoT edge computing, the data mining performance of the IoT edge computing-based data mining method is improved by 0.0295, 0.1870, and 0.2059 on the large datasets of Dataset4 and Dataset5, respectively. the average turnaround time is lower than 6.5 for different edge computing power levels. The system rewards are gradually improved from 5.3 to 8.2, and the number of packet loss of the algorithm is less than 5. The feasibility and effectiveness of the IoT data mining method and system based on cloud-edge collaboration are confirmed by this study, and a feasible method for data mining can be applied to IoT systems under cloud-edge collaboration.

The Internet of Things (IoT) end devices have major limitations related to hardware and energy autonomy. Generally, the highest energy consumption is related to communication, which accounts for up to 60% of consumption depending on the application. Among the strategies to optimize the energy consumed by communication, data compression methods are one of the most promising. However, most data compression algorithms are designed for personal computers and need to be adapted to the IoT context. This study aims to adapt classical algorithms, such as LZ77, LZ78, LZW, Huffman, and Arithmetic coding, and to analyse their performance and energy metrics in IoT end devices. The evaluation is performed in a device with an ESP32 processor and LoRa modulation. The study makes use of real datasets derived from two IoT applications. The results show compression rates close to 70%, a three-fold increase in the number of messages sent, and a reduction in energy consumption of 22%. An analytical model was also developed to estimate the gain in the battery life of the device using the adapted algorithms.

The purpose of this paper is to explore the role of Machine Learning (ML) in fortifying the security of cloudbased Internet of Things (IoT) systems, using a comprehensive security management approach. The methodological approach involved comparing different ML techniques such as Decision Trees, Random Forest, Support Vector Machines, and Convolutional Neural Networks. Their effectiveness was evaluated based on the accuracy of threat detection in cloud-based IoT systems. The findings revealed that Convolutional Neural Networks demonstrated the highest accuracy rate (98%) in threat detection, thereby significantly enhancing the security of IoT systems. It also identified improvements in threat detection, prevention, response, and system recovery across all ML techniques. Research limitations were primarily the rapidly evolving nature of both ML and IoT technologies, necessitating continual reassessments. The scope was also limited to cloud-based IoT systems, leaving room for further research on other types of IoT systems. The practical implications included improved system security, which could lead to increased trust and wider adoption of IoT technology in various sectors, from healthcare to home security. The social implications entail a safer digital environment, contributing to data privacy and reducing the risk of cyber threats for individuals and communities. The originality of this paper lies in its comprehensive approach to IoT security management using ML, providing valuable insights into the effectiveness of different ML techniques in enhancing threat detection accuracy.

PurposeThe purpose of this paper is to answer “Why do Chinese consumers use IOT systems?” and “Do consumers’ cognitive and affect experiences moderate the relationship between psychological perception factors and perceived usefulness?”Design/methodology/approachIn-depth interview with consumers and experts had been conducted and then the perceived psychological factors that influence perceived usefulness had been summarized. Based on a survey test of 337 smart home users, this study applies partial least squares technique analysis to test the research model.FindingsThe research results show that perceived psychological factors (perceived ease of use, perceived intelligence, perceived convenience and perceived privacy risk) have significant effect on the intention and behavior of IOT systems usage through perceived usefulness. Cognitive experience moderates the relationship between perceived ease of use and perceived usefulness, perceived privacy risk and perceived usefulness; affect experience moderates the relationship between perceived ease of use and perceived usefulness.Research limitations/implicationsThe current study mainly tested the antecedents of consumers’ usage of IOT systems, and the outcome of using the system was not investigated. Future research can examine the outcome (e.g. satisfaction, perceived value) by using the expectation-confirmation theory.Originality/valueThis study provides a useful insight into the key driving factors in consumers’ intention and behavior of using IOT systems. The previous studies over IOT systems have not observed consumers’ perception of IOT systems, but in fact IOT systems are being applied to more and more personal users.

This paper presents an implementation of a Wireless Internet of Things (IoT) system applied to the traction motor drive condition monitoring in electric vehicles (EVs). The design and testing of the prototype using an ESP8266 microcontroller module to acquire motor's vibration, current, and temperature information for the motor condition monitoring application is presented. This IoT system has been designed and developed from the ground up using commercially off-the-shelf components and open-source software platform for fast, reliable data acquisitions, low power consumption, and data gathered by the IoT system get reported to the cloud server in real time. The experimental results reveal that the IoT system is capable of capturing and reporting vital motor's parameters to cloud server and an automatic notification is sent to operators when motor's abnormality is detected in real time. Thanks to IoT technology, the preventive maintenance of traction motor can be effectively and remotely planned with rich data collection and analysis. With advanced power consumption reduction techniques, a sensor node consumes extremely low amount of battery power at which ideal for mobile applications.

Advanced digital signatures for preserving privacy and trust management in hierarchical heterogeneous IoT: Taxonomy, capabilities, and objectives

Wireless communication in Internet of Things (IoT) systems involves several devices communicating in the limited available frequency spectrum using different wireless communication standards. To achieve efficient spectrum usage in the IoT systems, it is desired to have the ability of dynamic spectrum allocation. Cognitive radios (CR) enable efficient spectrum utilization by performing spectrum sensing to gain the knowledge of current spectrum occupancy and dynamically reconfiguring the communication parameters, making them highly suitable for IoT systems. In this paper, we present the efficient hardware implementation of a spectrum sensing scheme for CR based IoT applications that require large bandwidth. We show that the proposed implementation on field programmable gate arrays (FPGAs) can achieve over 1.56x improvement in performance, while consuming 77% less generic resources and at a fractionally higher power consumption.