Fully Integrated Silicone Electromagnetic Actuators for Untethered and Bio‐Inspired Soft Robotics

In the contemporary era, novel manufacturing technologies like additive manufacturing (AM) have revolutionized the different engineering sectors including biomedical, aerospace, electronics, etc. Four-dimensional (4D) printing aka AM of smart materials is gaining popularity among the scientific community, which has the excellent ability to make soft structures such as soft robots, actuators, and grippers. These soft structures are developed by applying various stimuli such as pH, temperature, magnetic field, and many combinations onto soft materials. Stimuli in 3D printing permit various shape-morphing behaviors such as bending, twisting, folding, swelling, rolling, shrinking, origami, or locomotion. A wide variety of soft magnetic structures can be fabricated through the incorporation of soft or hard magnetic particles into soft materials resulting in magneto-active soft materials (MASMs). With this integration, magneto-thermal coupling actuation allows diverse magneto-deformations, facilitating the development of personalized devices that are capable of enhanced deformation. In this review, guidelines are provided on the 3D printing for MASMs such as magneto-active polymers (MAPs), magneto-active composites, and magneto-active hydrogels (MAHs) on the booming development of various smart and flexible devices such as soft robots, wearable electronics, and biomimetic devices. Moreover, 3D-printed soft robotics have an outstanding capacity to adapt to complicated situations for many advanced actuating applications. Finally, some current challenges and emerging areas in this exciting technology have been proposed. Lastly, it is anticipated that technological advancements in developing smart and intelligent magneto-active structures will have a significant impact on the design of real-world applications.

Continued technological progress in robotic systems has led to more applications where robots and humans operate in close proximity and even physical contact in some cases. Soft robots, which are made of highly compliant and deformable materials, provide inherent safety features unlike conventional robots that are made of stiff and rigid components. Soft robotics is a rapidly developing field exploiting biomimetic design principles, novel sensor and actuation concepts, and advanced manufacturing techniques. In this study, we propose novel 3D printable soft vacuum actuators that are inspired by the sporangium of fern trees. These actuators that are directly manufactured using commercial and affordable fused deposition modeling 3D printers offer many advantages such as high actuation speed (5.54 Hz), long lifetime (123,000 cycles), large payload to weight ratio (∼26), and significant output forces (∼16 N). The behavior of these actuators is accurately predicted, and their performance is optimized using finite element modeling. Furthermore, diverse robotic applications such as locomotion robots (a walking robot moving with an average forward speed of vf = 3.54 cm/s, and a hopping robot called Gongaroo hopping with an average speed of vf = 3.75 cm/s), grippers, and artificial muscles have been established and activated using the new soft actuation concept. Finally, to demonstrate the modularity of the proposed actuation concept, soft actuators with multiple degrees of freedom and variable length are established using a series of 3D printable vacuum hinges.

Conventional robots are constructed with rigid parts and materials, restricting their ability to deform freely and adapt to the external environment. Performing tasks such as handling delicate materials and navigating narrow pathways is challenging for these typical robots made of stiff materials. However, there is a growing demand for such functions in various industries. Recent advances in soft robotics have garnered considerable attention as solutions to these challenges. Soft robotic systems in various forms present a systematic solution for performing unique tasks. The goal of soft robotics research is to develop advanced technologies, incorporating innovative robotic mechanisms based on soft materials and structures to enhance adaptability. Soft robots find broad applications in diverse fields, including industry, healthcare, and field exploration. Soft component technology plays a crucial role in configuring soft robots. Soft actuators introduce new types of motion and operation mechanisms, while soft sensors measure the deformation of the actuators with a tiny stiffness change. These advancements in soft actuators and sensors encourage researchers to explore new robotic designs and applications. Additionally, the component technology enables the integration of soft and typical robots into hybrid B Youngsu Cha

Energy in Robotics: An Interdisciplinary Challenge

Soft robots can adapt their shape to move through narrow gaps in ways a rigid robot cannot because of their compliance, but most of pneumatic and hydraulic soft robots are still relay on conventional hard valve and it hinder soft robots to completely achieve this. Here we describe a newly quake-typel five-way soft valve. This valve is only 47g and each way of the valve can be controlled individually. When vacuum is applied to the control chamber of the valve, the membranes will be pulled into control chamber and flow can be free to flow. To shape the complicated internal channels of the soft valve, a newly molding technique, which use soluble structure (PVA) as molding cores, was proposed. Compared with the previous soft valves, the soft valve can achieve more complicated function. A starfish-like soft robot was designed and manufactured to illustrate how the soft valve control its bending and stretching.

More than 130,000 people have strokes each year in the United States [1]. Of these victims, 76% are left with disabilities that cost the nation over $54 billion in lost work and medical fees. One prominent disability is upper extremity hemiplegia, which occurs among approximately 50% of stroke sufferers [2]. Robotic technology has the potential to provide an automated platform for controlled rehabilitation and assisted, task-oriented therapy. Several systems have been designed to assist in patient articulation of an impaired hand using rigid robotic components. While these products have been successful in articulating the pure bending motions of the four fingers, the limited capabilities of rigid technologies fail to reproduce the complicated motion path [5] of the thumb during opposition grasp (see Figure 1). This is the most important articulation for normal hand function and specifically for picking up everyday objects. To date, robotic systems for thumb rehabilitation have not been widely investigated [3] apart from some recent work [4] that used a multi-joint rigid robot.

Earthworms have entirely soft bodies mainly composed of circular and longitudinal muscle bundles but can handle the complexity of unstructured environments with exceptional multifunctionality. Soft robots are naturally appropriate for mimicking soft animal structures thanks to their inherent compliance. Here, we explore the new possibility of using this compliance to coordinate the actuation movements of single-type soft actuators for not only high adaptability but the simultaneous multifunctionality of soft robots. A cross-linked actuator coordination mechanism is proposed and explained with a novel conceptual design of a cross-linked network, characterization of modular coordinated kinematics, and a modular control strategy for multiple functions. We model and analyze the motion patterns for these functions, including grabbing, manipulation, and locomotion. This further enables the combination of simultaneous multi-functions with this very simple actuator network structure. In this way, a soft modular robot is developed with demonstrations of a novel continuous-transportation mode, for which multiple objects could be simultaneously transported in unstructured environments with either mobile manipulation or pick-and-place operation. A comprehensive workflow is presented to elaborate the cross-linked actuator coordination concept, analytical modeling, modular control strategy, experimental validation, and multi-functional applications. Our understanding of actuator coordination inspires new soft robotic designs for wider robotic applications.

As robots more frequently fraternize with humans in everyday life, aspects such as safety, flexibility of tasks, and appearance become increasingly important. Soft robotics is attractive for new human‐close applications, but soft actuators constitute a major challenge both in terms of actuation force and speed, and in terms of control and accuracy of the deformable soft actuator body. Herein, several of these challenges are addressed by developing versatile ultrasoft electromagnetic actuators that operate in absence of external magnetic fields, while simultaneously monitoring their states by internal strain sensors. The versatile actuators can compress to less than 50% of their initial length with strain‐independent contraction force and operate in both contraction and expansion modes up to 200 Hz frequency while conforming to curved surfaces. The soft multilayer conductive cellulose‐based foams are lightweight (3 mg cm−3) and provide internal strain‐sensing capability and structural support, thereby improving the monitoring and controllability of the actuators while maintaining an axial softness of 0.6 kPa. It is believed that the concept of soft versatile electromagnetic actuators with integrated lightweight strain‐sensing foams is promising for a wide range of applications within soft robotics.

Robots have been around us for quite some time now. Robots are machines capable of performing tasks on their own with high accuracy and precision and minimal supervision to reduce human effort. Our daily lives are touched by different forms of robots around us, be it a direct interaction in form of robotic helpers at the airport or indirectly in the case of industrial arm robots assembling the electronics and machines. Traditionally, there are several component systems to robotics and one of the prominent one is actuation, which is made from hard and rigid components in these conventional robots. However, this is responsible for their intermittent motion. A new field of research, soft robotics, makes of soft materials for their fabrication and draws inspiration from natural organisms and how they produce fluidic and complex motions. There are different ways by which these soft materials can be actuated and include techniques like applying pneumatic and hydraulic pressure, applying heat, making use of a chemical process like combustion, applying varying magnetic fields and applying electric fields. Among these, the class of actuators employing soft materials deformed by applying the electric field, known as Dielectric elastomer actuators, are preferred owing to their advantages of simple fabrication, large actuation strain and control by electrical stimulus. The architecture of these actuators resembles a variable capacitor with electrodes on either sides of the elastomer, and their performance depends on material properties like dielectric constant and mechanical stiffness. Generally, researchers have tried to modify either of these properties with addition of solid conductive or ceramic fillers, or chemical modification of the elastomer, and this has led to undesirable changes on the other material properties. Drawing inspiration from biological materials like skin, which is a soft material system filled with fluids, a novel composite is synthesized utilizing a solid polymer matrix and a high dielectric constant liquid filler, an ionic liquid. An increase in dielectric constant is observed accompanied with significant reduction in mechanical stiffness. The novel composites show significant improvement upon the actuation performance of the commonly used elastomeric system at considerably low electric fields. Owing to the judicious choice of material systems, the composites also show high stability and transparency. With emergence of new generation technologies such as display touchscreens, touchpads, virtual reality and augmented reality, human machine interaction and haptics has become ever more important. Soft actuators and dielectric elastomer actuators (in particular), owing to their inherent softness, have convincing advantage over the conventional rigid actuators. Additionally, state-of-the-art technologies for haptics primarily seek to simulate the perception of texture change with sensory manipulation. Furthermore, dielectric elastomer actuators in their current form suffer from visible obstructiveness and non-integrable architecture. A new device architecture for dielectric elastomer actuators, capable of producing on-demand surface texture change and local topographic features, is demonstrated. Owing to its unique architecture, a highly transparent, flexible and integrable configuration of the device is showed. Out-of-plane deformations and force feedback from the devices are shown to be well above the perceptual threshold of sensors, known as mechanoreceptors, present in our fingertips. Another attribute of the biological appendages in natural organisms is the ability to reversibly modulate its mechanical properties upon demand, which still eludes the field of soft robotics. One of the best examples of this is found in human body, where muscles modulate their stiffness in accordance to the load distribution and movement. Most of the current approaches mange to only demonstrate reversible stiffness and involves combination of a passive reversible stiffness component with the existing actuator. Hence, a novel low-temperature phase change material is identified for enabling reversible rigidity in the soft actuators owing to its low melting point, significant gap between melting and solidification, superior thermal stability, high mechanical strength and high dielectric constant. Thermal control is chosen the modulation of mechanical properties, owing to its lightweight design and scalability. The fabricated reversible rigidity composites show impressive variations in stretchability, bendability and hardness. Owing to its ability to melt and re-solidify, the composites also demonstrate a healing behaviour with the ability to regain complete structural integrity and mechanical strength. These novel ultra-soft, high-k liquid filler-based polymer composites, reversible rigidity composites and transparent and integrable device architectures for field-driven soft actuators could pave the way for next generation applications such as shape morphing, adaptive surfaces and transparent haptic devices.

Emerging classes of soft robotics with flexible actuation, intelligent sensibility, and biomimetic functionality are driving significant advances in academic researches and commercial applications. Such new generation robotics relies heavily on important breakthroughs in soft matter engineering and flexible actuation systems. Unlike conventional rigid robots, soft robots generally have unique sporting styles and manufacturing strategies. Recently, a series of newly developed soft materials—gallium‐based liquid metals (LMs) are found to display dramatical roles in making soft machines and robotics with their unusual properties in soft robotic actuation and self‐driven field. With superior merits of both high stretchability and electroconductivity over conventional soft materials, LM is increasingly innovated as flexible sensors and actuators in constructing intelligent soft robots. Typical advances in LM enabled soft machines and robotics are summarized and interpreted, herein, with special focus on the driving principles of the LM objects, the preparation methods of LM flexible electronics for making soft robots, and the applications of LM in biomedicines and intelligent robots, together with the consideration of key challenges facing LM‐based soft robotics and its future prospects.

Soft robots equipped with multifunctionalities have been increasingly needed for secure, adaptive, and autonomous functioning in unknown and unpredictable environments. Robotic stacking is a promising solution to increase the functional diversity of soft robots, which are required for safe human-machine interactions and adapting in unstructured environments. However, most existing multifunctional soft robots have a limited number of functions or have not fully shown the superiority of the robotic stacking method. In this study, we present a novel robotic stacking strategy, Netting-Rolling-Splicing (NRS) stacking, based on a dimensional raising method via 2D-to-3D rolling-and-splicing of netted stackable pneumatic artificial muscles to quickly and efficiently fabricate multifunctional soft robots based on the same, simple, and cost-effective elements. To demonstrate it, we developed a TriUnit robot that can crawl 0.46 ± 0.022 body length per second (BL/s) and climb 0.11 BL/s, and can carry a 3 kg payload while climbing. Also, the TriUnit can be used to achieve novel omnidirectional pipe climbing including rotating climbing, and conduct bionic swallowing-and-regurgitating, multi-degree-of-freedom manipulation based on their multimodal combinations. Apart from these, steady rolling, with a speed of 0.19 BL/s, can be achieved by using a pentagon unit. Furthermore, we applied the TriUnit pipe climbing robot in panoramic shooting and cargo transferring to demonstrate the robot's adaptability for different tasks. The NRS stacking-driven soft robot here has demonstrated the best overall performance among existing stackable soft robots, representing a new and effective way for building multifunctional and multimodal soft robots in a cost-effective and efficient way.

Soft robots are inherently compliant and adaptive, therefore they are promising candidates for interacting with humans. However robotic manipulators utilizing soft actuators are often constrained by a series of actuator performance limitations. In this work we design a novel linear soft robotic actuator with significantly improved performances over the existing products, achieving 300% deformation ratio, quasi-constant output force over a wide motion range, while maintaining passive compliance and adaptability. Moreover, the novel actuator is less prone to friction, and could be fabricated using inject molding and 3D printing, hence having high repeatability at very low cost. An analytical model was developed to characterize the actuator behavior and provide a guideline for actuator design according to performance specifications. A 6 DOF soft manipulator was designed and fabricated utilizing the novel soft actuator. The manipulator arm had a serial kinematic structure with a biomimetic wrist and was driven by 12 soft actuators mounted onto the arm links. With 1.2m workspace radius and 1kg payload, the working air pressure could be as low as 1bar. Preliminary results have shown the validity of the novel soft actuator and manipulator designs, as well as the strong potential of soft robots in human-oriented applications.

Printed silicone pneumatic actuators for soft robotics

4D printing soft robots guided by machine learning and finite element models

The benefits of soft robotic actuation have been recognized and soft actuators are increasingly used. Soft robots are generally lightweight, inexpensive, and highly compliant. They are often used for interaction with small objects which only require relatively low force output. Nevertheless, large-scale applications can still benefit from the advantages of soft actuators if force output is sufficiently large. Some soft actuation has been employed in large-scale applications, but the area remains greatly underexplored. This article presents the Soft Torque-generating Actuation System (STAS) a lean soft actuation architecture capable of producing relatively large torque output while maintaining compliant interaction with the environment. Design and fabrication of the system are described, and a theoretical model is introduced for predicting torque output. The model is validated against measured torque output, and the system is further characterized in terms of power output. The model is shown to adequately predict torque output at low actuator angles. The system is shown to require only 30.0 kPa to achieve a large torque output of 10 N-m. The system also reaches a peak power output of 1.29 Watts. Finally, a versatile application of STAS is shown through a wearable joint-assistive device. The STAS is a promising architecture for a new type of high force actuation using soft actuators.