Fuzzy-class point approach for software effort estimation using various adaptive regression methods

Context: The current trend for software construction consists in developing software through increments, which is recommended by recognized methodologies such as Rational Unified Process or Agile Methodologies. Although Cosmic Functional Size Measurement Method is one of the most known techniques to estimate effort and cost in software projects, there is little evidence that indicates how to adapt it to non-waterfall lifecycles, such as incremental ones. Goal: This paper presents an approach called Incremental CFP that allows estimating effort for each increment using Cosmic Function Points (CFP) and COCOMO's effort adjustment factor (EAF). Method: In order to validate this new approach, we employed data from two different projects in which undergraduate students had to work originally with IFPUG function points. Results: The results were considered as promising given that the difference between the estimated effort and the real effort was lower than 30% for the second increment. Conclusions: With a minimum difference between the estimated effort and the real effort, it was possible to establish that the proposed technique is acceptable and predictive. However, more study cases should be performed before generalizing its applicability for different contexts.

Software development effort estimation is one of the most crucial activities in software engineering. Effort estimation permits managers and software engineers to anticipate, forecast, and precisely quote the schedule, budget and manpower requirements. By accurately estimating the effort; software projects can be saved from under run or over run. In this paper we have summarized and then analyzed the past work of software effort estimation in a systematic way. 10 researches were surveyed and explained briefly that how they are contributing towards solving the effort estimation problem in terms of time, cost or test. It also emphasizes that various effort estimation models have different pros and cons and can be used in different context on basis of different types of historical data. The survey discovered the most popular models used for effort prediction are supervised learning algorithms. The trends identified through this survey can help in exploring the potential research areas.

Effort estimation is very important for any software development organisation. A lot of work is present for effort estimation in traditional software development but, effort estimation in agile software development (ASD) poses a great research challenge as not much of work is done in this regard. This work proposes a fuzzy approach for effort estimation in ASD environment by identifying first the cost drivers affecting the effort of agile projects and then calculating the effort using fuzzified story point approach. These cost drivers are collected through meetings and by taking a web survey from the companies in Delhi-NCR which practise ASD. Statistical tests are also performed in order to show the dependency of effort on these cost drivers. Here, fuzzy interval type-2 is used which is compared with fuzzy type-1. It is found that, the effort calculated using fuzzy interval type-2 is better than fuzzy type-1.

Accurate software effort estimation is one of the key factors to a successful project by making a better software project plan. To improve the estimation accuracy of software effort, many studies usually aimed at proposing novel effort estimation methods or combining several approaches of the existing effort estimation methods. However, those researches did not consider the distribution of historical software project data which is an important part impacting to the effort estimation accuracy. In this paper, to improve effort estimation accuracy by least squares regression, we propose a data partitioning method by the accuracy measures, MRE and MER which are usually used to measure the effort estimation accuracy. Furthermore, the empirical experimentations are performed by using two industry data sets (the ISBSG Release 9 and the Bank data set which consists of the project data performed in a bank in Korea).

Effort estimations are a crucial aspect of software development. The tasks should be completed before the start of any software project. Accurate estimations increase the chances of project success, and inaccurate information can lead to severe issues. This study systematically reviewed the literature on effort-estimating models from 2015-2024, identifying 69 relevant studies from various publications to compile information on various software work estimation models. This review aims to analyze the models proposed in the literature and their classification, the metrics used for accuracy measurement, the leading model that has been chiefly applied for effort estimation, and the benchmark datasets available. The study utilized 542 relevant articles on software development, cost, effort, prediction, estimation, and modelling techniques in the search strategy. After 194 selections, the authors chose 69 articles to understand ML applications in SEE comprehensively. The researchers used a scoring system to assess each study’s responses (from 0 to 5 points) to their research questions. This helped them identify credible studies with higher scores for a comprehensive review aligned with its objectives. The data extraction process identified 91% (63) of 69 studies as either highly or somewhat relevant, demonstrating a successful search strategy for analysis. The literature review on SEE indicates a growing preference for ML-based models in 59% of selected studies. 17% of the studies chosen favor hybrid models to overcome software development challenges. We qualitatively analyzed all the literature on software effort estimation using expert judgment, formal estimation techniques, ML-based techniques, and hybrid techniques. We discovered that researchers have frequently used ML-based models to estimate software effort and are currently in the lead. This study also explores the application of feature importance and selection in machine learning models for Software Effort Estimation (SEE) using popular algorithms like support Vector Machine (SVM), AdaBoost (AB), Gradient Boost (GB), and Random Forest (RF) with six benchmark datasets like CHINA, COCOMO-NASA2, COCOMO, COCOMO81, DESHARNAIS, and KITCHENHAM. We analyze the dataset descriptions and feature importance of the dataset analysis using ML models for choosing crucial play attributes in SEE.

Accurate software effort estimation has a big importance for software companies for the reason that management of the project, control of the project, financial matters and timely deliveries are achieved with effort estimation. Thus, effort estimation plays vital role for software companies. In this study, software effort estimation is predicted by using Multilayer Perceptron and Adaptive Neuro Fuzzy Inference System. As a dataset, NASA 93 with 93 projects and Desharnais with 77 projects are used. The results show that Mean Magnitude Relative Error of Adaptive Neuro Fuzzy Inference System is lower than Multilayer Perceptron. In addition, it is seen that PRED(0.25) value of Adaptive Neuro Fuzzy Inference System is higher than Multilayer Perceptron. Thus, performance of Adaptive Neuro Fuzzy Inference System is better when compared to performance of Multilayer Perceptron.

The estimation of software development effort has been centralized mostly on the accuracy of estimates through dealing with heterogeneous datasets regardless of the fact that the software projects are inherently complex and uncertain. In particular, Analogy Based Estimation (ABE), as a widely accepted estimation method, suffers a great deal from the problem of inconsistent and non-normal datasets because it is a comparison-based method and the quality of comparisons strongly depends on the consistency of projects. In order to overcome this problem, prior studies have suggested the use of weighting methods, outlier elimination techniques and various types of soft computing methods. However the proposed methods have reduced the complexity and uncertainty of projects, the results are not still convincing and the methods are limited to a special domain of software projects, which causes the generalization of methods to be impossible. Localization of comparison and weighting processes through clustering of projects is the main idea behind this paper. A hybrid model is proposed in which the software projects are divided into several clusters based on key attributes (development type, organization type and development platform). A combination of ABE and Particle Swarm Optimization (PSO) algorithm is used to design a weighting system in which the project attributes of different clusters are given different weights. Instead of comparing a new project with all the historical projects, it is only compared with the projects located in the related clusters based on the common attributes. The proposed method was evaluated through three real datasets that include a total of 505 software projects. The performance of the proposed model was compared with other well-known estimation methods and the promising results showed that the proposed localization can considerably improve the accuracy of estimates. Besides the increase in accuracy, the results also certified that the proposed method is flexible enough to be used in a wide range of software projects.

Software cost and time estimation is the process of estimating the cost and time required to develop a software system. Software cost and time estimation supports the planning and tracking of software projects. Effectively controlling the expensive investment of software development is one of the important issues in software project management. Estimating software development cost with high precision is still a great challenge for project managers, because it allows for considerable financial and strategic planning. Software cost estimation refers to the predictions of the likely amount of effort, time, and staffing levels required to build a software system. A very helpful form of cost estimation is the one made at an early stage during a project, when the costing of the project is proposed for approval. However, estimates at the early stages of the development are the most difficult to obtain. In this paper a novel Constructive Cost Model (COCOMO) based on soft computing approach is proposed for software cost estimation. This model carries some of the desirable features of neural networks approach, such as learning ability and good interpretability, while maintaining the merits of the COCOMO model. Unlike the standard neural networks approach, the proposed model can be interpreted and validated by experts, and has good generalisation capability. The model deals effectively with imprecise and uncertain input and enhances the reliability of software cost estimates. From the experimental results, it was concluded that, by the proposed neural network model, the accuracy of cost estimation can be improved and the estimated cost can be very close to the actual cost.

Accurate effort estimation in early stage of software development life cycle is a major challenge for many software industries. The use of various optimization techniques helps in improving the effort estimation accuracy. The Support Vector Regression (SVR) is one of different soft-computing techniques, that helps in getting optimal estimated values. The idea of SVR is based upon the computation of a linear regression function in a high dimensional feature space where the input data are mapped via a nonlinear function. Further, the SVR kernel methods can be applied in transforming the input data and then based on these transformations, an optimal boundary between the possible outputs can be obtained. The main objective of the research work carried out in this paper is to estimate the software effort using class point approach. Then, an attempt has been made to optimize the results obtained from class point analysis using various SVR kernel methods to achieve better prediction accuracy. A performance comparison of the models obtained using various SVR kernel methods has also been presented in order to highlight performance achieved by each method.

Software development effort estimation (SDEE) generally involves leveraging the information about the effort spent in developing similar software in the past. Most organizations do not have access to sufficient and reliable forms of such data from past projects. As such, the existing SDEE methods suffer from low usage and accuracy. We propose an efficient SDEE method for open source software, which provides accurate and fast effort estimates. The significant contributions of our article are (i) novel SDEE software metrics derived from developer activity information of various software repositories, (ii) an SDEE dataset comprising the SDEE metrics’ values derived from approximately 13,000 GitHub repositories from 150 different software categories, and (iii) an effort estimation tool based on SDEE metrics and a software description similarity model . Our software description similarity model is basically a machine learning model trained using the PVA on the software product descriptions of GitHub repositories. Given the software description of a newly envisioned software, our tool yields an effort estimate for developing it. Our method achieves the highest standardized accuracy score of 87.26% (with Cliff’s δ = 0.88 at 99.999% confidence level) and 42.7% with the automatically transformed linear baseline model. Our software artifacts are available at https://doi.org/10.5281/zenodo.5095723.

This article employs Multivariate Adaptive Regression Spline (MARS) for determination of friction capacity of driven piles in clay. MARS is non-parametric adaptive regression procedure. Pile length, pile diameter, effective vertical stress, and undrained shear strength are considered as input of MARS and the output of MARS is friction capacity. The developed MARS gives an equation for determination of <TEX>$f_s$</TEX> of driven piles in clay. The results of the developed MARS have been compared with the Artificial Neural Network. This study shows that the developed MARS is a robust model for prediction of <TEX>$f_s$</TEX> of driven piles in clay.

This study compares single and hybrid soft computing models for estimating daily solar radiation flux for two scenarios. Scenario I developed single soft computing models, including multilayer perceptron (MLP), support vector machines (SVM), adaptive neuro-fuzzy inference system (ANFIS), and multivariate adaptive regression splines (MARS), for estimating daily solar radiation flux at two stations from the USA and South Korea. The MLP model was used to evaluate the effect of factors controlling daily solar radiation flux. Using different combinations of controlling factors as input, the MLP and SVM models, based on evaluation measures, were found to be superior to the ANFIS and MARS models at Big Bend station, USA. In addition, the MLP, SVM, and MARS models performed better than did the ANFIS model at Incheon station, South Korea. Scenario II combined the discrete wavelet transform (DWT) and single soft computing models (e.g., MLP and SVM) for improved performance using 4-input combination. The wavelet-based MLP (WMLP) and SVM (WSVM) models were superior to other single soft computing models (MLP, SVM, ANFIS, and MARS) at two stations. Taylor diagrams, violin plots and point density plots were also utilized to examine the similarity between the observed and estimated solar radiation flux values. Results showed that scenarios I and II can be alternatives for estimating daily solar radiation flux based on different meteorological information, such as peninsular and continental conditions.

Over the past ten couple of years, there is a variety of effort models proposed by academicians and practitioners at early stage of software development life cycle. Some addressed that efforts could be predicted using Lines of Codes(LOC) and COCOMO, others emphasized that it could be made using Function Point Analysis(FPA) or others. The study seeks to develop a model that estimates software effort by studying and analyzing small and medium scale application software. To develop such a model, 50 completed software projects are collected from a software company. With the sample data, design team factors are identified and extracted. By applying them to simple regression analyses, a prediction of software of effort estimates with accuracy of MMRE = 9% was constructed. The results give several benefits. First, the estimation problems are minimized due to the simple procedure used in identifying those factors. Second, the predicted software projects are only limited to a specific environment rather than being based upon industry environment. We believe the accuracy of effort estimates can be improved. According to the results analyzed, the work shows that it is possible to build up simple and useful prediction model based on data extracted at the early stage of software development life cycle. We hope this model can provide valuable ideas and suggestions for project designers for planning and controlling software projects in near future.

Crowd-Sourced software development (CSSD) is getting a good deal of attention from the software and research community in recent times. One of the key challenges faced by CSSD platforms is the task selection mechanism which in practice, contains no intelligent scheme. Rather, rule-of-thumb or intuition strategies are employed, leading to biasness and subjectivity. Effort considerations on crowdsourced tasks can offer good foundation for task selection criteria but are not much investigated. Software development effort estimation (SDEE) is quite prevalent domain in software engineering but only investigated for in-house development. For open-sourced or crowdsourced platforms, it is rarely explored. Moreover, Machine learning (ML) techniques are overpowering SDEE with a claim to provide more accurate estimation results. This work aims to conjoin ML-based SDEE to analyze development effort measures on CSSD platform. The purpose is to discover development-oriented features for crowdsourced tasks and analyze performance of ML techniques to find best estimation model on CSSD dataset. TopCoder is selected as target CSSD platform for the study. TopCoder’s development tasks data with development-centric features are extracted, leading to statistical, regression and correlation analysis to justify features’ significance. For effort estimation, 10 ML families with 2 respective techniques are applied to get broader aspect of estimation. Five performance metrices (MSE, RMSE, MMRE, MdMRE, Pred (25) and Welch’s statistical test are incorporated to judge the worth of effort estimation model’s performance. Data analysis results show that selected features of TopCoder pertain reasonable model significance, regression, and correlation measures. Findings of ML effort estimation depicted that best results for TopCoder dataset can be acquired by linear, non-linear regression and SVM family models. To conclude, the study identified the most relevant development features for CSSD platform, confirmed by in-depth data analysis. This reflects careful selection of effort estimation features to offer good basis of accurate ML estimate.

GA-based method for feature selection and parameters optimization for machine learning regression applied to software effort estimation