Fuzzy logic controller for rehabilitation robot manipulator

In the impedance control scheme in robotic manipulation applications, the interaction force can be indirectly controlled by acting on the manipulator reference position trajectory. However, the reference position depends on the environment parameters, like location and stiffness, which in practice are not exactly known. To deal with those uncertainties, this paper presents a fuzzy adaptive approach which determines the appropriate reference (target) positions to an impedance controller in order to obtain the desired force/position trajectory. Moreover, only an estimate of the environment location is necessary, and so the fuzzy adaptive controller corrects this estimated position based on the force error. The fuzzy adaptive controller is a kind of self organizing controller, which consists of a direct fuzzy controller and an adaptation mechanism, (the fuzzy inverse model) which adjusts the membership functions of the consequent parts of the direct fuzzy controller. To validate the proposed control scheme, simulation results with a two degree of freedom robot manipulator are presented where it is shown a good force/tracking performance with uncertainties on the environment location and on the stiffness value.

This paper deals with real-time implementation of visual-motor control of a 7 degree of freedom (DOF) robot manipulator using self-organized map (SOM) based learning approach. The robot manipulator considered here is a 7 DOF PowerCube manipulator from Amtec Robotics. The primary objective is to reach a target point in the task space using only a single step movement from any arbitrary initial configuration of the robot manipulator. A new clustering algorithm using Kohonen SOM lattice has been proposed that maintains the fidelity of training data. Two different approaches have been proposed to find an inverse kinematic solution without using any orientation feedback. In the first approach, the inverse Jacobian matrices are learnt from the training data using function decomposition. It is shown that function decomposition leads to significant improvement in accuracy of inverse kinematic solution. In the second approach, a concept called sub-clustering in configuration space is suggested to provide multiple solutions for the inverse kinematic problem. Redundancy is resolved at position level using several criteria. A redundant manipulator is dexterous owing to the availability of multiple configurations for a given end-effector position. However, existing visual motor coordination schemes provide only one inverse kinematic solution for every target position even when the manipulator is kinematically redundant. Thus, the second approach provides a learning architecture that can capture redundancy from the training data. The training data are generated using explicit kinematic model of the combined robot manipulator and camera configuration. The training is carried out off-line and the trained network is used on-line to compute the joint angle vector to reach a target position in a single step only. The accuracy attained is better than the current state of art.

SUMMARYIn most dynamic adaptive control simulation of robotic manipulators, the Langrange–Euler (L–E) dynamic equations are first piecewise linearized about the desired reference and then discretized and rewritten in a state space form. This makes things very complicated and it is easy to make errors. What is more is that with a different reference this work must be done again. A new simulation scheme – Backward Recursive Self-Tuning Adaptive (BRSTA) – as it will be called, is suggested in this paper for adaptive controller design of robot manipulators. A two degree of freedom robot manipulator is used to verify the scheme in the condition of highly nonlinear and highly coupled system. A one degree of freedom robot manipulator is used for comparing both the forward and backward methods. The main advantages of this scheme include that it can be used for evaluating the self-tuning adaptive control laws and provide the initial process parameters for real-time control. And it is concluded here that the Newton–Euler (N–E) dynamic equations are equally well qualified as the Langrange–Euler (L-E) equations for the simulation of self-tuning adaptive control of robot manipulators.

Fuzzy logic controllers are designed for spacecraft hovering flight in a binary asteroid system. The binary asteroid system is modeled as an ellipsoid-sphere system where the spherical harmonics method is adopted to represent the gravitational field of the asteroids. The method to design the fuzzy logic controllers is introduced in detail. Hovering flight about the inner collinear equilibrium point L 1 of binary asteroid Didymos is numerically presented. Detailed steps on roughly estimating the scaling gains of fuzzy logic controllers are also summarized. Numerical simulations are performed to show the effectiveness of the proposed method. Moreover, the aforementioned fuzzy logic controllers can be used for both continuous and impulsive thrusters. The fuzzy controllers with continuous thrust, the fuzzy controllers with fixed thrust, and the other two kinds of sliding-mode controllers are optimized in the same way and compared in the same simulation environment together, to show tremendous advantages of fuzzy logic controllers and continuous thrusters on both control performance and propellant consumption.

Attempts are being made to enhance the drive performance by intelligent control using fuzzy logic (FL) and neural network techniques. One of the frequently discussed applications of artificial intelligence in control is the replacement of a standard proportional plus integral (PI) speed controller with an FL or artificial neural network (ANN) speed controller. Regardless of all the work, it appears that a thorough comparison of the drive behavior under PI, FL, and ANN speed control is necessary. This article attempts to compare PI, fuzzy, and ANN controllers that are implemented in an embedded system for closed-loop speed control of DC drive fed by a buck-type DC–DC power converter. The PI controller is designed based on the small signal modeling of the system. The PI-like fuzzy controller structure is considered for comparison. Two ANN controllers are designed. One controller uses training data obtained from the simulation of a fuzzy controller and the other uses training data from the simulation of a PI controller. The performance of the controllers is studied for a variety of operating conditions, such as step change in speed command and step change in load torque. The parameters selected for the comparison are the steady-state error and the rise time of the response. It is shown that ANN speed controllers provide a superior speed response in terms of rise time and the steady-state error compared to PI and FL controllers. This advantage arises from the fact that the neural network has the property of generalization and the control surface of the neural controller is smooth. The designed neural network controller is simple, with three neurons only, and so it is best suited for embedded system implementation. It is also found that the ANN controller trained with the training data from a PI controller has a better response compared to the ANN controller trained with data from a fuzzy controller.

The paper proposes a modified particle swarm optimization algorithm (MPSO) for online tuning to the fuzzy controller of power system stabilizer (PSS). The hybrid fuzzy controller combines concepts from fuzzy systems and particle swarm optimization to produce powerful system controllers that are used for adaptive control. Two synchronous generators fitted with a PSS and are connected via double transmission lines will be the system under study. Three types of PSS controllers such as Conventional lead-lag PSS (CPSS), Static Fuzzy Logic Controller (SFLC) and online tuning Fuzzy Logic Controller based on PSO algorithm will be considered. The modified PSO algorithm used to adjust the fuzzy set parameters of each Fuzzy Logic Controller (FLC-PSO) online. The speed error and the change of error are the input vector, and the stabilizing signal is the output of both fuzzy logic controller (FLC). The FLC controllers will be tested under different disturbances for a wide-range of operating points. The computation time and the complexity of the fuzzy controller are reduced. The simulation results ensure the effectiveness of the proposed FLC-PSO controller for achieving the good dynamic response of the system under study.

The achievement of non-linear models has been quite a complex challenge. Order to simplify assumptions are also used to achieve simpler forms. The purpose of this paper is to provide an outline and discuss about the advantages and disadvantages of the fuzzy controls in the robotics manipulator and presents an approach to design a controller for multivariable nonlinear system using Fuzzy Logic Controller “FLC” approach as controller. The Robot Manipulator performance may not be satisfied when the conventional controller is used. The performance of a system is regulated by input of Fuzzy which represented by the error and error change. The suggested controller has been simulating the behaviour of a three serial rotational links. The fuzzy controller uses a variable input-output information to control robot's joints velocity and position.

Fuzzy logic control based on the Takagi–Sugeno inference method has been applied for the yeast alcoholic fermentation running in a continuous-time biochemical reactor in this paper. A type-1 fuzzy PID controller was designed to temperature control in a biochemical reactor. The fuzzy PID controller was also designed using type-2 fuzzy sets. The advantage of the fuzzy control is that it can be used very successfully for control of strongly non-linear processes and processes that are difficult to model because of complicated reaction kinetics. Obtained simulation results confirm this fact. The disadvantage of the fuzzy control design lies in the time-consuming tuning of controllers. The subtractive clustering method was used to identify the rule base. This approach was chosen to minimize the number of rules of the designed fuzzy logic controllers and to simplify the fuzzy controller design. Simulation results confirm that fuzzy PID controllers can assure better performance than conventional PID controllers. Yeast alcoholic fermentation is an exothermic process and the cooling is necessary to maintain the optimal temperature in the reactor. Fuzzy PID control reduces coolant consumption in comparison with conventional PID control and so it assures energy-efficient control of continuous-time alcoholic fermentation. Using type-2 fuzzy sets in the fuzzy PID controller design is very promising as the type-2 fuzzy controller offers even better results than the type-1 fuzzy controller.

This paper presents the design of a novel fuzzy logic based automatic caution order system for Indian Railways. The Artificial Intelligent Fuzzy Logic Controller (FLC) is used. Simulation is done in Matlab-Simulink to control speed of the train as per the caution order. A `caution data processor' subsystem is introduced to switch from manual to fuzzy control of the traction motor at caution regions of the track & sets the speed limitation as per caution order. FLC gets activated at Caution point by the Caution data Processor and gets deactivated at the end of caution thereby passing the control of the train to its loco pilot. This system of imposing speed limitations on route sections is made automatic by the introduction of Caution Data Processor and FLC; improving on conventional speed control aspects of the train manually by the loco pilot. FLC Inputs are Speed error and acceleration. An emergency switch is also included to override the fuzzy control in the caution region, if any emergency occurs. Simulation studies were done to check the working of FLC design & the speed control of traction motor is achieved as per Caution Order. Thus FLC & Caution Data Processor provides intelligent & effective speed control of traction motor.

In 2013 the Editor of Journal of Vibration and Control and SAGE became aware of a peer review ring involving assumed and fabricated identities that appeared to centre around Peter Chen at National Pingtung University of Education, Taiwan (NPUE). SAGE and the Editor then began a complex investigation into the case during the rest of 2013 and 2014. Following an unsatisfactory response from Peter Chen, NPUE was notified. NPUE were serious in addressing the Journal and SAGE’s concerns. NPUE confirmed that the institution was investigating Peter Chen. SAGE subsequently uncovered a citation ring involving the above mentioned author and others. We regret that individual authors have compromised the academic record by perverting the peer review process and apologise to readers. On uncovering problems with peer review and citation SAGE immediately put steps in place to avoid similar vulnerability of the Journal to exploitation in the future. More information may be found at www.sagepub.co.uk/JVC_Statement_2014 . The Journal and SAGE understand from NPUE that Peter Chen has resigned his post at NPUE. The following articles are retracted because after thorough investigation evidence points towards them having at least one author or being reviewed by at least one reviewer who has been implicated in the peer review ring and/or citation ring. All authors have had an opportunity to respond to the allegations and proposed actions. OnlineFirst articles (these articles will not be published in an issue) Chen CY, Chen T-H, Chen Y-H, Yu S-E and Chung P-Y (2013) Information technology system modeling an integrated C-TAM-TPB model to the validation of ocean tidal analyses Journal of Vibration and Control Epub ahead of print 7 May 2013. doi: 10.1177/1077546312472924 Chang R-F, Chen CY, Su F-P and Lin H-C (2013) A two-step approach for broadband digital signal processing technique Journal of Vibration and Control Epub ahead of print 26 April 2013. doi: 10.1177/1077546312472925 Chen TH, Chang CJ, Yu SE, Chung PY and Liu C-K (2013) Nonlinear information analysis and system management technique: the influence of design experience and control complexity Journal of Vibration and Control Epub ahead of print 12 April 2013. doi: 10.1177/1077546312473321 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of a 3T flow model using vibrating NXT: II. Model validation Journal of Vibration and Control Epub ahead of print 10 April 2013. doi: 10.1177/1077546312470481 Chen CY, Shih BY, Chen YH, Yu SE and Liu YC (2013) The exploration of 3T flow model using vibrating NXT: I. model formulation Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312467360 Lin M-L and Chen C-W (2013) Stability analysis of fuzzy-based NN modeling for ecosystems using fuzzy Lyapunov methods Journal of Vibration and Control Epub ahead of print 6 February 2013. doi: 10.1177/1077546312466687 Chen CY, Chen TH, Chen YH and Chiu J (2012) A multi-stage method for deterministic-statistical analysis: a mathematical case and measurement studies Journal of Vibration and Control Epub ahead of print 20 December 2012. doi: 10.1177/1077546312466579 Shih BY, Lin MC and Chen CY (2012) Autonomous navigation system for radiofrequency identification mobile robot e-book reader Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312466578 Chang RF, Chen CY, Su FP, Lin HC and Lu C-K (2012) Multiphase SUMO robot based on an agile modeling-driven process for a small mobile robot Journal of Vibration and Control Epub ahead of print 13 December 2012. doi: 10.1177/1077546312464993 Shih B-Y, Lin Y-K, Cheng M-H, Chen C-Y and Chiu C-P (2012) The development of an application program interactive game-based information system Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464682 Chen C-Y, Chang C-J and Lin C-H (2012) On dynamic access control in web 2.0 and cloud interactive information hub: technologies Journal of Vibration and Control Epub ahead of print 12 December 2012. doi: 10.1177/1077546312464992 Shin BY, Chen CY and Hsu KH (2012) Robot cross platform system using innovative interactive theory and selection algorithms for Android application Journal of Vibration and Control Epub ahead of print 13 November 2012. doi: 10.1177/1077546312463757 Articles published in an issue Chen C-W (2014) Applications of neural-network-based fuzzy logic control to a nonlinear time-delay chaotic system Journal of Vibration and Control 20 (4): 589-605. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312461370 Chen C-W (2014) A review of intelligent algorithm approaches and neural-fuzzy stability criteria for time-delay tension leg platform systems Journal of Vibration and Control 20 (4): 561-575. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463759 Chen C-Y, Chang C-J and Lin C-H (2014) On dynamic access control in web 2.0 and cloud interactive information hub: trends and theories Journal of Vibration and Control 20 (4): 548-560. Epub ahead of print 5 November 2012. doi: 10.1177/1077546312463762 Lin M-L and Chen C-W (2014) Stability conditions for ecosystem modeling using the fuzzy Lyapunov method Journal of Vibration and Control 20 (2): 290-302. Epub ahead of print 23 October 2012. doi: 10.1177/1077546312451301 Chen C-H, Kuo C-M, Hsieh S-H and Chen C-Y (2014) Highly efficient very-large-scale integration (VLSI) implementation of probabilistic neural network image interpolator Journal of Vibration and Control 20 (2): 218-224. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312458822 Chen C-Y (2014) Wave vibration and simulation in dissipative media described by irregular boundary surfaces: a mathematical formulation Journal of Vibration and Control 20 (2): 191-203. Epub ahead of print 22 October 2012. doi: 10.1177/1077546312464258 Chen C-H, Yao T-K, Dai J-H and Chen C-Y (2014) A pipelined multiprocessor system- on-a-chip (SoC) design methodology for streaming signal processing Journal of Vibration and Control 20 (2): 163-178. Epub ahead of print 16 October 2012. doi: 10.1177/1077546312458821 Lin M-L and Chen C-W (2014) Fuzzy neural modeling for n-degree ecosystems using the linear matrix inequality approach Journal of Vibration and Control 20 (1): 82-93. Epub ahead of print 8 October 2012. doi: 10.1177/1077546312458533 Chen C-H, Wu W-X and Chen C-Y (2013) Ant-inspired collective problem-solving systems Journal of Vibration and Control 19 (16): 2481-2490. Epub ahead of print 18 September 2012. doi: 10.1177/1077546312456231 Chen C-H, Yao T-K, Kuo C-M and Chen C-Y (2013) Evolutionary design of constructive multilayer feedforward neural network Journal of Vibration and Control 19 (16): 2413-2420. Epub ahead of print 12 September 2012. doi: 10.1177/1077546312456726 Chen C-W (2013) Applications of the fuzzy-neural Lyapunov criterion to multiple time-delay systems Journal of Vibration and Control 19 (13): 2054-2067. Epub ahead of print 16 August 2012. doi: 10.1177/1077546312451034 Chung P-Y, Chen Y-H, Walter L and Chen C-Y (2013) Influence and dynamics of a mobile robot control on mechanical components Journal of Vibration and Control 19 (13): 1923-1935. Epub ahead of print 20 July 2012. doi: 10.1177/1077546312452184 Chen C-W (2013) Neural network-based fuzzy logic parallel distributed compensation controller for structural system Journal of Vibration and Control 19 (11): 1709-1727. Epub ahead of print 22 June 2012. doi: 10.1177/1077546312442233 Chen C-W, Yeh K, Yang H-C, Liu KFR and Liu C-C (2013) A critical review of structural system control by the large-scaled neural network linear-deferential-inclusion-based criterion Journal of Vibration and Control 19 (11): 1658-1673. Epub ahead of print 18 June 2012. doi: 10.1177/1077546312443377 Chen C-H, Kuo C-M, Chen C-Y and Dai J-H (2013) The design and synthesis using hierarchical robotic discrete-event modeling Journal of Vibration and Control 19 (11): 1603-1613. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449645 Chang CJ, Chen CY and Chou I-T (2013) The design of information and communication technologies: telecom MOD strength machines Journal of Vibration and Control 19 (10): 1499-1513. Epub ahead of print 27 June 2012. doi: 10.1177/1077546312449644 Shih B-Y, Chen C-Y, Li K-H, Wu T-Y, Chen G-Y (2013) A novel NXT control method for implementing force sensing and recycling in a training robot Journal of Vibration and Control 19 (10): 1443-1459. Epub ahead of print 1 June 2012. doi: 10.1177/1077546312446361 Chen C-W, Chen P-C and Chiang W-L (2013) Modified intelligent genetic algorithm-based adaptive neural network control for uncertain structural systems Journal of Vibration and Control 19 (9): 1333-1347. Epub ahead of print 31 May 2012. doi: 10.1177/1077546312442232 Chen C-Y, Shih B-Y, Shih C-H and Wang L-H (2013) Enhancing robust and stability control of a humanoid biped robot: system identification approach. Journal of Vibration and Control 19 (8): 1199-1207. Epub ahead of print 26 April 2012. doi: 10.1177/1077546312442947 Chang C-J, Chen C-Y and Huang C-W (2013) Applications for medical recovery using wireless control of a bluetooth ball with a hybrid G-sensor and human-computer interface technology Journal of Vi

Retraction notice

Many bridges in Taiwan have been in use from the period that Taiwan was governed by the Japanese, over 50 years ago, which is the average ultimate usable lifetime of such structures. Three-quarters of the bridges on major highways have been in use for more than 20 years and numerous bridges on country roads have also been in use for more than 20 years. In other words, most of the bridges in Taiwan are aging and may require repair or replacement. Ambient vibration tests are utilized to measure the response of old bridges, which are difficult to equip with accelerometers. The Fourier transform method is traditionally used to gain important information about ambient vibration records. However, the development of information technology over the last 20 years has meant that there are more kinds of signal management technologies, including the wavelet and Hilbert—Huang transform (HHT) methods. In this study we investigate the characteristics of aging bridges by comparison with their structural properties. We analyze their ambient vibration, and discuss the possible influence of the frequency function. Long-term environmental impacts create many structural problems, but with traditional methods examination of bridge health is difficult. Therefore, in our HHT management system, we examine destroyed bridges. The characteristics and behavior of bridges subjected to random loading can be understood by analysis with the random decrement technique and the frequency response function method.

Retraction notice

The performance of any fuzzy logic controller (FLC) is greatly dependent on its inference rules. In most cases, the closed-loop control performance and stability are enhanced if more rules are added to the rule base of the FLC. However, a large set of rules requires more on-line computational time and more parameters need to be adjusted. In this paper, a robust PD-type FLC is driven for a class of MIMO second order nonlin- ear systems with application to robotic manipulators. The rule base consists of only four rules per each de- gree of freedom (DOF). The approach implements fuzzy partition to the state variables based on Lyapunov synthesis. The resulting control law is stable and able to exploit the dynamic variables of the system in a lin- guistic manner. The presented methodology enables the designer to systematically derive the rule base of the control. Furthermore, the controller is decoupled and the procedure is simplified leading to a computationally efficient FLC. The methodology is model free approach and does not require any information about the sys- tem nonlinearities, uncertainties, time varying parameters, etc. Here, we present experimental results for the following controllers: the conventional PD controller, computed torque controller (CTC), sliding mode con- troller (SMC) and the proposed FLC. The four controllers are tested and compared with respect to ease of design, implementation, and performance of the closed-loop system. Results show that the proposed FLC has outperformed the other controllers.

In this paper, a new measurement system for the noninvasive monitoring of the continuous blood pressure waveform in the radial artery is presented. The proposed system comprises a model-based fuzzy logic controller, an arterial tonometer and a micro syringe device. The flexible diaphragm tonometer registers the continuous blood pressure waveform. To obtain accurate measurement without distortion, the tonometer's mean chamber pressure must be kept equal to the mean arterial pressure (MAP), the so-called optimal coupling condition, such that the arterial vessel has the maximum compliance. Since the MAP cannot be measured directly, to keep the optimal coupling condition becomes a tracking control problem with unknown desired trajectory. To solve this dilemma, a model-based fuzzy logic controller is designed to compensate the change of MAP by applying a counter pressure on the tonometer chamber through the micro syringe device. The proposed controller consists of a model-based predictor and a synthetic fuzzy logic controller (SFLC). The model-based predictor estimates the MAPs changing tendency based on the identified arterial pressure-volume model.