Fuzzy Preprocessing and Clustering Analysis Method of Underwater Multiple Targets in Forward Looking Sonar Image for AUV Tracking

Unmanned underwater operations using remotely operated vehicles or unmanned surface vehicles are increasing in recent times, and this guarantees human safety and work efficiency. Optical cameras and multi-beam sonars are generally used as imaging sensors in underwater environments. However, the obtained underwater images are difficult to understand intuitively, owing to noise and distortion. In this study, we developed an optical and sonar image fusion system that integrates the color and distance information from two different images. The enhanced optical and sonar images were fused using calibrated transformation matrices, and the underwater image quality measure (UIQM) and underwater color image quality evaluation (UCIQE) were used as metrics to evaluate the performance of the proposed system. Compared with the original underwater image, image fusion increased the mean UIQM and UCIQE by 94% and 27%, respectively. The contrast-to-noise ratio was increased six times after applying the median filter and gamma correction. The fused image in sonar image coordinates showed qualitatively good spatial agreement and the average IoU was 75% between the optical and sonar pixels in the fused images. The optical-sonar fusion system will help to visualize and understand well underwater situations with color and distance information for unmanned works.

Underwater images often suffer from color distortion and detail loss due to light absorption and scattering, which degrades visual quality and limits practical applications. To address these issues, a novel adaptive algorithm for underwater image color correction and detail enhancement is proposed. The algorithm first applies threshold stretching to adjust the grayscale range, enhancing contrast while mitigating the risk of localized overcompensation. Based on the color distribution, images are categorized into bluish and greenish tones, providing the foundation for the adaptive color compensation method (ACCM). The ACCM is designed to separately compensate different color channels, using the green channel as a reference to restore the most degraded channels while maintaining overall color balance. The compensation process is further constrained by the minimum color loss criterion to ensure consistent color fidelity. Furthermore, an edge detail enhancement method is formulated to recover fine details by amplifying intensity differences between the original image and its smoothed version. Extensive experiments on multiple underwater image data sets demonstrate that the proposed algorithm consistently outperforms state-of-the-art methods, achieving average improvements of 0.0021, 0.0646, 0.3677, and 0.0800 in underwater color image quality evaluation, underwater image quality metric, fog aware density evaluator, and colorfulness contrast fog density index metrics, respectively, underscoring its effectiveness and robustness across diverse underwater environments.

Shrimps are aquaculture products highly needed by the people and this is the reason their growth needs to be monitored using underwater digital images. However, the large dimensions of the shrimp digital images usually make the processing difficult. Therefore, this research focuses on reducing the dimensions of underwater shrimp digital images without reducing their information through the application of the Principal Component Analysis (PCA) algorithm. This was achieved using 4 digital shrimp images extracted from video data with the number of columns 398 for each image. The results showed that 12 PCs were produced and this means the reduced digital images with new dimensions have 12 variable columns with data diversity distributed based on a total variance of 95.61%. Moreover, the original and reduced digital images were compared and the lowest value of MSE produced was 94.12, the minimum value of RMSE was 9.54, and the highest value of PSNR was 8.06 db, and they were obtained in the 4th digital image. The experiment was conducted using 3 devices which include I3, I7, and Google Colab processor computers and the fastest computational result was produced at 2.1 seconds by the Google Colab processor. This means the PCA algorithm is good for the reduction of digital image dimensions as indicated by the production of 12 PC as the new variable dimensions for the reduced underwater image of shrimps.

The mosaic of sonar images is more difficult than the mosaic of traditional optical images due to their poor quality and the difficulty in extracting feature points. The existing mosaic methods of sonar images have a series of problems, such as low correct matching rate, large cumulative errors and high requirements for the quality of collected sonar images. In this paper, we proposed a high precision method to implement the mosaic of the underwater sonar video image sequence. Firstly, Accelerated Unsharp Masking (AUSM) algorithm is proposed to preprocess the original image. Then we extract KAZE feature points from preprocessed sonar images. A matching method combining multiple matching strategies with Progressive Sample Consensus (PROSAC) algorithm is followed to complete the image registration. Weighted fusion method and a region of interest (ROI) acquisition method based on the slope of right border is used to optimize the mosaicked image. Finally, we can obtain a high-quality panoramic image of underwater sonar video by a global mosaic strategy. Mosaic experiments on the sonar video image sequence collected by multi-beam sonar demonstrate that the proposed method in this paper can increase the number of feature points by about 70% and make the correct matching rate higher than 70%. The proposed method also has good robustness and the cumulative error during multi-image mosaic is less.

Underwater images suffer from blurring effects, low contrast, and grayed out colors due to the absorption and scattering effects under the water. Many image enhancement algorithms for improving the visual quality of underwater images have been developed. Unfortunately, no well-accepted objective measure exists that can evaluate the quality of underwater images similar to human perception. Predominant underwater image processing algorithms use either a subjective evaluation, which is time consuming and biased, or a generic image quality measure, which fails to consider the properties of underwater images. To address this problem, a new nonreference underwater image quality measure (UIQM) is presented in this paper. The UIQM comprises three underwater image attribute measures: the underwater image colorfulness measure (UICM), the underwater image sharpness measure (UISM), and the underwater image contrast measure (UIConM). Each attribute is selected for evaluating one aspect of the underwater image degradation, and each presented attribute measure is inspired by the properties of human visual systems (HVSs). The experimental results demonstrate that the measures effectively evaluate the underwater image quality in accordance with the human perceptions. These measures are also used on the AirAsia 8501 wreckage images to show their importance in practical applications.

The theory of compressive sampling (CS) was reintroduced by Candes, Romberg and Tao, and D. Donoho in 2006. Using a priori knowledge that a signal is sparse, it has been mathematically proven that CS can defY Nyquist sampling theorem. Theoretically, reconstruction of a CS image relies on the minimization and optimization techniques to solve this complex almost NP-complete problem. There are many paths to consider when compressing and reconstructing an image but these methods have remained untested and unclear on natural images, such as underwater sonar images. The goal of this research is to perfectly reconstruct the original sonar image from a sparse signal while maintaining pertinent information, such as mine-like object, in Side-scan sonar (SSS) images. Goldstein and Osher have shown how to use an iterative method to reconstruct the original image through a method called Split Bregman's iteration. This method decouples the energies using portions of the energy from both the !1 and !2 norm. Once the energies are split, Bregman iteration is used to solve the unconstrained optimization problem by recursively solving the problems simultaneously. The faster these two steps or energies can be solved then the faster the overall method becomes. While the majority of CS research is still focused on the medical field, this paper will demonstrate the effectiveness of the Split Bregman's methods on sonar images.

In recent days, a lot of study has been done on improving the visual quality of underwater and undersea imaging in submarine and military operations to find the hidden structure designs and sea excursions. This paper proposed an underwater image enhancement method based on colour constancy theory. When we compare with much of the existing research, the time and complexity of the proposed method are low, and it achieves excellent performance. Firstly, we analyse the underwater imaging model and distortion. Then, by compensating the red channel and applying local white balance, a linear transformation is performed. Finally, results are obtained by applying the histogram equalization to the RGB images. We also measure the image quality by taking the parameters PSNR, UIQM, UCIQE, and Entropy. These parameters are compared to proposed and existing approaches; however, our method produces higher image quality.

Algorithms for improving the quality of underwater optical images: A comprehensive review

For the underwater degenerative image caused by obscure and noise, atmospheric turbulence model is utilized to construct the restoration model. By computing the underwater image quality function which is used to estimate the adaptive degradation model parameter, underwater image is restored through Wiener filters. The connection between image contrast and average gradients and model parameter is analyzed as well. The experiments show that the proposed method exerts powerful effort on restoration of the obscure underwater image caused by scattering. The proposed method has a better improvement on contrast and definition of underwater image than other common preprocessing methods and is especially suitable for further degradation model analysis and objective detection.

The complexity and challenging underwater environment leading to degradation in underwater image. Measuring the quality of underwater image is a significant step for the subsequent image processing step. Existing Image Quality Assessment (IQA) methods do not fully consider the characteristics of degradation in underwater images, which limits their performance in underwater image assessment. To address this problem, an Underwater IQA (UIQA) method based on color space multi-feature fusion is proposed to focus on underwater image. The proposed method converts underwater images from RGB color space to CIELab color space, which has a higher correlation to human subjective perception of underwater visual quality. The proposed method extract histogram features, morphological features, and moment statistics from luminance and color components and concatenate the features to obtain fusion features to better quantify the degradation in underwater image quality. After features extraction, support vector regression(SVR) is employed to learn the relationship between fusion features and image quality scores, and gain the quality prediction model. Experimental results on the SAUD dataset and UIED dataset show that our proposed method can perform well in underwater image quality assessment. The performance comparisons on LIVE dataset, TID2013 dataset,LIVEMD dataset,LIVEC dataset and SIQAD dataset demonstrate the applicability of the proposed method.

In recent years, enhancement of underwater images based on generative adversarial network (GAN) has been widely used. Aiming at the shortcoming that the texture details of the images generated by GAN are not clear enough, an underwater image pre-process unit and a generator including a perceptual subnet and a refine subnet are designed to improve visual quality of underwater images. The role of the perceptual subnet is to maintain the structure and semantic information of the input image. Refine subnet is to make the generated image clearer in the details of the texture. Specially, considering that underwater images may prevent the network from learning effectively, an underwater image pre-process unit is proposed to improve the quality of underwater images. To maintain the structure and semantic information of underwater images and preserve texture details of underwater images, the perceptual subnet and the refine subnet are proposed, respectively. Then, color-structure perception loss is proposed to obtain good performance in color and structure, and content loss and detail loss are proposed to keep content consistent and sharper texture. Ablation study verify the rationality and effectiveness of each loss function. Finally, subjective and objective experiments prove that the proposed method can obtain underwater images with higher visual quality and clearer texture details.

The quality of underwater imaging is significantly degraded by light scattering and absorption due to water body and suspended particles. To address the issues of color distortion and contrast degradation, we propose a novel underwater image restoration method based on constrained color compensation and background light color space-based haze-line model. Our method begins by applying the constrained color compensation approach to provide targeted intensity adjustments for attenuated color channels. This process corrects color distortion while simultaneously mitigating the risks of overcompensation and insufficient color saturation. Subsequently, the haze-line model is employed in the transformed background light color space to restore the underwater image. Specifically, the color corrected underwater image is transformed to a novel color space, where the background light intensity serves as the origin. In this color space, all haze lines are identified by grouping pixels with similar color characteristics through the superpixel clustering method. Then, the transmission distribution can be estimated based on the haze-line model. Finally, the scattered light components are removed by applying the underwater descattering model with the estimated transmission distribution to the luminance channel of the color corrected underwater image. Comparative experiments implemented on the UIEB and UCCS underwater image datasets demonstrate the superiority of the proposed method in terms of color correction and contrast enhancement when compared with state-of-the-art underwater image restoration techniques. Our codes are available at <uri xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">https://github.com/MinjieWan/C3HLM</uri>.

Images captured by underwater robots often suffer from issues such as blurring and colour distortion, which hinder effective feature extraction and target recognition in underwater environments. To address these challenges, this paper proposes a novel underwater image enhancement method based on generative adversarial networks (GANs), termed multiple colour space underwater generative adversarial network (MCS‐UGAN). The proposed method is built upon a GAN framework, consisting of a generator and a discriminator. The generator comprises two main modules: a deblurring module and a colour correction module. The deblurring module innovatively incorporates an efficient multi‐scale feature extraction technique and an attention mechanism, which enhances object contours while preserving fine image details. The colour correction module integrates residual blocks into the U‐Net architecture, effectively mitigating the problems of gradient vanishing and explosion during backpropagation in underwater image enhancement networks, thereby enhancing the network's feature learning capability. This design corrects colour distortions while preserving edge information in the image. The discriminator adopts the PatchGAN structure, which focuses on the local regions of the image, significantly improving the generator's ability to restore high‐frequency details and thus enhancing the quality of the generated images. Experimental results on benchmark datasets demonstrate that, compared to existing methods, MCS‐UGAN achieves superior performance in terms of peak signal‐to‐noise ratio, structural similarity index measure, underwater image quality measure, and underwater colour image quality evaluation, with average values of 26.24, 0.91, 3.13, and 0.64, respectively. Results from real‐world applications further show that MCS‐UGAN effectively increases the number of extracted corner points, validating its practicality and effectiveness. The code is available at https://github.com/invincibility6/MCS‐UGAN.git

Captured underwater images usually suffer from severe color cast and low contrast due to wavelength-dependent light absorption and scattering. These degradation issues affect the accuracy of target detection and visual understanding. The underwater image formation model is widely used to improve the visual quality of underwater images. Accurate transmission map and background light estimation are the keys to obtaining clear images. We develop a multi-priors underwater image restoration method with adaptive transmission (MUAT). Concretely, we first propose a calculation method of the dominant channel transmission to cope with pixel interference, which combines two priors of the difference between atmospheric light and pixel values and the difference between the red channel and the blue-green channel. Besides, the attenuation ratio between the superior and inferior channels is adaptively calculated with the background light to solve the color distortion and detail blur caused by the imaging distance. Ultimately, the global white balance method is introduced to solve the color distortion. Experiments on several underwater scene images show that our method obtains accurate transmission and yields better visual results than state-of-the-art methods.

A reference-free underwater image quality assessment metric in frequency domain