Fuzzy System for Obstacle Detection and Avoidance for Mobile Robot

Intelligent robotics is gaining significance in Maintenance, Repair, and Overhaul (MRO) hangar operations, where mobile robots navigate complex and dynamic environments for Aircraft visual inspection. Aircraft hangars are usually busy and changing, with objects of varying shapes and sizes presenting harsh obstacles and conditions that can lead to potential collisions and safety hazards. This makes Obstacle detection and avoidance critical for safe and efficient robot navigation tasks. Conventional methods have been applied with computational issues, while learning-based approaches are limited in detection accuracy. This paper proposes a vision-based navigation model that integrates a pre-trained Yolov5 object detection model into a Robot Operating System (ROS) navigation stack to optimise obstacle detection and avoidance in a complex environment. The experiment is validated and evaluated in ROS-Gazebo simulation and turtlebot3 waffle-pi robot platform. The results showed that the robot can increasingly detect and avoid obstacles without colliding while navigating through different checkpoints to the target location.

The objective of this research is to develop a real time obstacle detection and obstacle avoidance for autonomous navigation of mobile robots using a stereo camera in an unstructured environment. Autonomous navigation of mobile robots demands a) Exact determination of position and orientation of Robot and b) Accurate determination of size, shape, depth and range of potential obstacles in the environment. Simple kinematic model is used for mobile robot and stereo camera with pan and tilt provision is considered for long range operation. Complete 3D reconstruction of object/obstacle is obtained from the stereo matching algorithm and with triangulation method. The pose (position and orientation) of mobile robot is formulated from the static object observation with stereo reference matching points using RANSAC (RANdom SAmple Consensus) in successive frames. Potential field based obstacle avoidance formulation is carried out by using the obstacle range, size information, mobile robot position and orientation. Finally, proportional derivative navigation control loop along with obstacle avoidance algorithm is formulated and verified.

In this paper a biologically inspired approach for compensating the limited angle of vision in obstacle detection systems of mobile robots is presented. Most of the time it is not feasible to exhaustively monitor the environment of a mobile robot. In order to nonetheless achieve safe navigation obstacle detection mechanisms need to keep in mind certain aspects of the environment. In mammals this task is carried out by the creature’s short-term memory. Inspired by this concept an absolute local map storing obstacles in terms of representatives has been introduced in the obstacle detection and avoidance system of the outdoor robot RAVON. That way the gap between the fields of vision of two laser range finders can be monitored which prevents the vehicle from colliding with obstacles seen some time ago.

The integration of machine learning and robotics brings promising potential to tackle the application challenges of mobile robot navigation in industries. The real-world environment is highly dynamic and unpredictable, with increasing necessities for efficiency and safety. This demands a multi-faceted approach that combines advanced sensing, robust obstacle detection, and avoidance mechanisms for an effective robot navigation experience. While hybrid methods with default robot operating system (ROS) navigation stack have demonstrated significant results, their performance in real time and highly dynamic environments remains a challenge. These environments are characterized by continuously changing conditions, which can impact the precision of obstacle detection systems and efficient avoidance control decision-making processes. In response to these challenges, this paper presents a novel solution that combines a rapidly exploring random tree (RRT)-integrated ROS navigation stack and a pre-trained YOLOv7 object detection model to enhance the capability of the developed work on the NAV-YOLO system. The proposed approach leveraged the high accuracy of YOLOv7 obstacle detection and the efficient path-planning capabilities of RRT and dynamic windows approach (DWA) to improve the navigation performance of mobile robots in real-world complex and dynamically changing settings. Extensive simulation and real-world robot platform experiments were conducted to evaluate the efficiency of the proposed solution. The result demonstrated a high-level obstacle avoidance capability, ensuring the safety and efficiency of mobile robot navigation operations in aviation environments.

The construction of a smart autonomous mobile robot system that can operate in an anonymous environment can be difficult. Building an autonomous mobile robot requires collecting data from sensors and cameras in order to recognize the surrounding environment, get knowledge of existing landmarks, and figure out its position and orientation. Many research studies have been carried out in recent years providing algorithms for achieving autonomous motion of mobile robot systems and object detection. The most common platform utilized for robot motion design is ROS (Robot Operating System) and for object detection YOLO (You Only Look Once) is a common choice. Additionally, the autonomous system needs motion planning in a systematic way to avoid obstacles by using LIDAR or other sensing methods generating the feedback signals required for control of motion around occupied spaces. One of the most effective and versatile feedback systems for mobile robot control can be constructed using visual feedback, which relies on a high-resolution camera that processes the image in real-time and the result is fed back to the control system for decision making. Visual feedback can be employed alone without sensors for feedback control of autonomous mobile robots, and it can be used for multiple tasks like path planning, obstacle avoidance, object detection, object recognition in addition to motion control. In this research, results of design and construction of an autonomous mobile rescue robot for finding victims through video data are presented. It is aimed to find victims via applying video as a data collection and feedback generation tool in the autonomous mobile robot control system. The visual feedback and YOLO v3 are used not only for finding victims but also for motion control. Our autonomous mobile robot is designed to move smoothly to the victim's direction and avoids obstacles by using ROS Global Planner. The robot is tested in multiple scenarios in different locations, various obstacle and victim numbers, and satisfactory results with good performances are obtained.

This paper studies the obstacle avoidance and navigation of mobile robots in unstructured environments. Because of the shortcomings of one single sensor, the system integrates the stereo vision sensor blumblebee2 with the lidar sensor to detect the information surrounding the mobile robot’s surroundings. And then through data fusion to get a more complete, more accurate scene distribution. Then use the improved system of ant colony optimization to increase the convergence speed and precision of the algorithm in robot path planning. Finally, the simulation experiment is carried out in the environment of Matlab and Visual Studio, and the physical experiment is carried out under the ROS platform. The experimental results show the feasibility and effectiveness of the proposed method.

One of the ultimate goals of mobile robotics research is to build robots that can safely carry out missions in hazardous and populated environments. Most of today's commercial mobile devices scale poorly along this dimension. Their motion planning relies on accurate, static models of the environments, and therefore they often fail their mission if humans or other unpredictable obstacles block their path. To build autonomous mobile robots one has to build systems that can perceive their environments, react to unforeseen circumstances, and plan dynamically in order to achieve their mission. Thus, the objective of the motion planning and control problem is to find collision-free trajectories, in static or dynamic environments containing some obstacles, between a start and a goal configuration. It has attracted much research in recent years. In this context the term control has a broad meaning that includes many different controls, such as low-level motor control, and behaviour control, where behaviour represents many complicated tasks, like obstacle avoidance and goal seeking. This article describes an intelligent motion planning and navigation system for omnidirectional mobile robots based on fuzzy logic. Owing to its simplicity and hence its short response time, the fuzzy navigator is especially suitable for on-line applications with strong real-time requirements. On-line planning is an on-going activity. The planner receives a continuous flow of information about occurring events and generates new commands in response to the incoming events, while previously planned motions are being executed. The fuzzy-rule-base of the proposed system combines the repelling influence, which is related to the distance and the angle between the robot and nearby obstacles, with the attracting influence produced by the distance and the angular difference between the actual direction and position of the robot and the final configuration, to generate actuating commands for the mobile platform. It can be considered as an on-line local navigation method for omnidirectional mobile robots for the generation of instantaneous collision-free motions. This reactive system is especially suitable for real-time applications. The use of fuzzy logic leads to a transparent system which can be tuned by hand or by a set of learning rules. Furthermore, this approach allows obstacle avoidance and navigation in dynamic environments. The functioning of the fuzzy motion planner with respect to omnidirectional mobile robots and results of simulated experiments are presented.

Mobile robot has been a major role to the application in military, industrial and agricultural purposes. Mobile robot should navigate through desire route and avoid the obstacle within the path. Many researcher come with the solution by using the various type of control and instrumentation system. The complexity of mobile robot system can make the system cost intensive and high risk. Proposed is a mobile robot equipped with GPS navigation system and obstacle avoidance system with low cost mobile structure, GPS module and sonar sensor. The combination GPS and Sonar will determine the position and obstacle avoidance for the mobile robot. Mobile robot should navigate according to waypoint that preset to the GPS module and sonar sensor detects the obstacle during mobile robot navigation by triggering the sonar sensor in sequence by using commanded loop daisy chaining application method. Mobile Robot can navigate through desired waypoint and at the same time apply the obstacle avoidance rules

In the intelligent transportation system, various accident avoidance techniques have been applied. Among them, one of the most common issues is the collision, which is yet unsolved problem. To this end, we develop collision warning and avoidance system (CWAS), which is implemented in the wheeled mobile robot. Likewise, path planning is a crucial problem in the mobile robots to perform a given task correctly. Here, a tracking system is presented for the mobile robot, which follows an object. Thus, we have implemented an integrated CWAS and tracking system in the mobile robot. Both systems can be activated independently. In the CWAS, the robot is controlled through a remotely controlled device, and collision prediction and avoidance functions are performed. In the tracking system, the robot performs tasks autonomously, where the robot maintains a constant distance from the followed object. The surrounding information is obtained through the range sensors, and the control functions are performed through the microcontroller. The front, left, and right sensors are activated to track the object, and all the sensors are used for the CWAS. Two algorithms based on the sensory information are developed with the distance control approach. The proposed system is tested using the binary logic controller and the fuzzy logic controller (FLC). The comparison of both controllers is also described by preferring time delay and complexity. The efficiency of the robot is improved by increasing smoothness in motion using the FLC, achieving accuracy in tracking, and advancements in the CWAS. Finally, simulation and experimental outcomes have displayed the authenticity of the system.

Abstract—This paper presents GAMYA, a cost-effective autonomous navigation vehicle developed using the Robot Operating System 2 (ROS2) framework. The system integrates a Raspberry Pi 4 as the central processing unit, an Arduino Uno R3 for motor control, and a 2D LiDAR sensor for environmental perception. GAMYA is designed to perform real-time mapping, localization, and obstacle avoidance through the implementation of the ROS2 Navigation2 stack and SLAM Toolbox. A differential drive mechanism is employed, and odometry is computed using encoder feedback to support accurate navigation. The system is tested in a simulated environment using Gazebo, where it successfully navigates dynamic and static obstacles. Results demonstrate reliable autonomous performance with minimal latency, showcasing the potential of using low-cost components to develop robust robotic platforms suitable for academic and research applications. Keywords—Autonomous Navigation, ROS2, LiDAR, SLAM, Gazebo Simulation, obstacle avoidance, Raspberry Pi, Arduino, Mobile Robot

Obstacle avoidance for mobile robot to reach the desired target from a start location is one of the most interesting research topics. However, until now, few works discuss about working of mobile robot in the dynamic and continuously changing environment. So, this issue is still the research challenge for mobile robots. Traditional algorithm for obstacle avoidance in the dynamic, complex environment had many drawbacks. As known that Q-learning, the type of reinforcement learning, has been successfully applied in computer games. However, it is still rarely used in real world applications. This research presents an effectively method for real time dynamic obstacle avoidance based on Q-learning in the real world by using three-wheeled mobile robot. The position of obstacles including many static and dynamic obstacles and the mobile robot are recognized by fixed camera installed above the working space. The input for the robot is the 2D data from the camera. The output is an action for the robot (velocities, linear and angular parameters). Firstly, the simulation is performed for Q-learning algorithm then based on trained data, The Q-table value is implemented to the real mobile robot to perform the task in the real scene. The results are compared with intelligent control method for both static and dynamic obstacles cases. Through implement experiments, the results show that, after training in dynamic environments and testing in a new environment, the mobile robot is able to reach the target position successfully and have better performance comparing with fuzzy controller.

This paper considers the real-time navigation and obstacle avoidance of mobile robots in complex environments. A novel local environment perception and navigation framework for mobile robot navigation based on the elevation information is proposed. A local elevation map is introduced to perceive and map obstacles in the local environment. Calculating obstacles’ heights and shapes by local elevation maps, the terrain traversability of the surrounding environment of a robot is determined, and a two-dimensional local occupancy grid map for robot path planning and navigation in local environment is generated. The effectiveness of our approach is validated experimentally through real-time navigation and obstacle avoidance in the artificial environment. The experimental results show that using the proposed framework, a mobile robot can safely reach its target position while avoiding the non-crossable area. For indoor mobile robots with limited computing power, in complex environments, it could provides more safe navigation and path-planning.

The obstacle avoidance controller is a key autonomous component which involves the control of tractor system dynamics, such as the yaw lateral dynamics, the longitudinal dynamics, and nonlinear constraints including the speed and steering angles limits during the path-tracking process. To achieve the obstacle avoidance ability of control accuracy, an independent path re-planning controller is proposed based on ROS (Robot Operating System) nonlinear model prediction in this paper. In the design process, the obstacle avoidance function and an objective function are introduced. Based on these functions, the obstacle avoidance maneuvering performance is transformed into a nonlinear quadratic optimization problem with vehicle dynamic constraints. Moreover, the tractor dynamics maneuvering performance can be effectively adjusted through the proposed objective function. To validate the proposed algorithm, a ROS based tractor dynamics model and the SLAM (Simultaneous Localization and Mapping) are established for numerical simulations under different speed. The maximum obstacle avoidance deviation in the simulation is 0.242 m at 10 m/s, and 0.416 m at 30 m/s. The front-wheel rotation angle and lateral velocity are within the constraint range during the whole tracking process. The numerical results show that the designed controller can achieve the tractor obstacle avoidance ability with good accuracy under different conditions. Keywords: ROS, obstacle avoidance, nonlinear model prediction, agricultural tractor DOI: 10.25165/j.ijabe.20191206.4907 Citation: Liu Z D, Lv Z Q, Zheng W X, Zhang W Z, Cheng X X. Design of obstacle avoidance controller for agricultural tractor based on ROS. Int J Agric & Biol Eng, 2019; 12(6): 58–65.

Unmanned aerial vehicles (UAVs), also known as drones, have gained considerable interest among academics in recent years, which significantly increases the demand for autonomous navigation systems for UAVs. In this study, autonomous navigation is addressed as a two-stage problem. The first stage is the obstacle detection phase, during which the UAVs leverage their onboard sensors to perceive the surroundings and detect obstacles. The second stage is the obstacle avoidance phase, where the UAVs make decisions to continue operations without colliding with anything while approaching the target. This study proposes a self-supervised learning-based depth prediction framework as the criterion for obstacle proximity detection. The framework consists of two subnetworks: the depth and pose estimation modules. The former predicts depth values, while the latter evaluates the object’s translation and rotation matrix. The framework leverages the subnetworks’ outputs to reconstruct the projection relationships of pixels between adjacent frames to optimize the training process. To address the challenge of UAVs operating in large-scale environments, a modified loss function that combines photometric loss and edge-aware smoothness is presented to increase the depth prediction module’s accuracy. This study also presents a deep reinforcement learning-based obstacle avoidance system that takes depth maps as inputs to generate evasive maneuvers. The system works independently from priori maps and models while it learns the collision-free trajectory from interacting with the environment. This study deploys value-based algorithms to learn the nonlinear mapping between the continuous inputs and discrete output motion commands. Furthermore, the proposed system is validated on different simulation scenarios. It is capable of completing the obstacle avoidance task with relatively optimal trajectories in varied environments, demonstrating its superior effectiveness and transferability. Keywords: unmanned aerial vehicles, urban airspace, obstacle detection and avoidance, self-supervised learning, deep reinforcement learning.

The aim of the project is to design an obstacle avoidance system by using neural network. The main functionality of the project is to predict the object detected and to find a path of avoidance the detected object. Due to the increase in autonomous vehicle centered around machine learning technology, expensive system which incorporates multiple sensors for the obstacle avoidance and object detection are made. To fill this gap, the project is designed to implement an object detection and obstacle avoidance system using a camera as the main component for detection. Jetson nano board is used as the main computer, NoirV2 camera is used as the main vision sensor, 3d printed structure for the body, two dc motor with a I2c based motor driver. SSD MobileNet v2 is used as the model for object detection, Jetson inference is the training guide which is used for the obstacle avoidance and object detection which is optimized to work with Jetson nano board providing a faster detection and fps. The project includes a web based Graphical user interface to control the robot and to monitor it. The project will solve the issues of expensive system and requirement of multiple sensors for object detection and obstacle avoidance.