Fuzzy TOPSIS-based Secure Neighbor Discovery Mechanism for Improving Reliable Data Dissemination in Wireless Sensor Networks

WITHDRAWN: An efficient biometric based authenticated geographic opportunistic routing for IoT applications using secure wireless sensor network

Tactical Wireless sensor networks (WSNs) provide a low-signature communications system that can be used for a wide variety of military applications. However, these networks are vulnerable to intrusion and must balance security with performance and longevity. The neighbor discovery process in a WSN is vital for nodes to maintain network connectivity, but it introduces security vulnerabilities. In addition, existing protocols for securing the neighbor discovery process use public key encryption (PKE), which is computationally expensive for low-powered, resource-constrained IEEE 802.15.4 enabled sensor devices. Therefore, a lightweight algorithm to secure the neighbor discovery process is necessary to prevent unauthorized nodes from accessing network data and resources. We develop a key management algorithm that modifies the commonly used Neighbor Discovery Protocol (NDP) and Secure Neighbor Discovery (SEND) protocol. We replace PKE in NPD and SEND with a symmetric encryption algorithm, AES, to allow for energy efficiency. In addition, we implement the Diffie-Hellman key exchange algorithm for symmetric key management. We simulate our algorithm in MATLAB to demonstrate its effectiveness in securing the neighbor discovery protocol while providing energy and message efficiency and key security.

The energy efficiency paradigm is a major bottleneck for the development of wireless sensor networks (WSNs) and Internet of Things (IoT) architectures and technologies. This edited book presents comprehensive coverage of energy harvesting sources and techniques that can be used for WSN and IoT systems

Internet of Things-based environments pose various challenges due to their anytime/anywhere computing, and the efficient cryptographic based key management is one of the major challenges in Internet of Things. The key management life cycle consists of initialization, key generation, key registration, key backup, key update, key recovery, and key revocation. Our contribution in this paper is to summarize the state-of-the-art key management schemes and techniques in different scenarios, such as mobile ad hoc networks, wireless sensor networks, and the Internet of Things environments. Further different issues related specifically to the Internet of Things environment are discussed and the causes and effects pertaining to the security breach for Internet of Things are identified. Furthermore, in this research work, we develop a novel permutation of threshold and identity-based key management schemes for the Internet of Things environment and have proposed future directions to counteract the attacks on confidentiality, integrity, authentication, and availability of security services in the Internet of Things environment and identified the two key management schemes, that is, identity and threshold schemes for Internet of Things, to resolve Internet of Things key management issues and maximum possible security services effective implementation. We evaluate our scheme with the help of mathematical and statistical techniques.

Herein, an Internet of Things (IoT) system with remote reconfigurable wireless sensor network (WSN) nodes is presented and its application to measure group work activity in a classroom is discussed. This IoT system consists of wiki pages, bots, (defined as remotely controlled devices), gateways, and remotely reconfigurable WSN Nodes. The bots/gateways and WSN nodes of the IoT system are controlled by scripts written on wiki pages that are read by the bot/gateways, which then forward the commands contained in the scripts to the WSN nodes. Each WSN node then executes the commands, obtains the resulting sensor values, and then returns those values to the bot/gateways. The bot/gateways relay the values and write them onto the wiki page. Each WSN node is flexible and reconfigurable because its behavior can be changed by the script commands written onto the wiki page. Using this IoT system, we created a measurement system to evaluate activity levels of group work in a classroom. After developing the measurement system, we found it was possible to adjust the sampling rate for obtaining sensor values simply by rewriting the script on the wiki page without directly manipulating the WSN.

In the complicated settings of WSN (Wireless Sensor Networks) and IoT (Internet of Things) environments, keeping a number of heterogeneous devices updated is a challenging job, especially with respect to effectively discovering target devices and rapidly delivering the software updates. In this paper, we convert the traditional software update process to a distributed service. We set an incentive system for faithfully transporting the patches to the recipient devices. The incentive system motivates independent, self-interested transporters for helping the devices to be updated. To ensure the system correctly operates, we employ the blockchain system that enforces the commitment in a decentralized manner. We also present a detailed specification for the proposed protocol and validate it by model checking and simulations for correctness.

Recently, IETF (Internet Engineering Task Force) presented CoAP (Constrained Application Protocol) for the communication between sensor and actuator nodes in a constrained environment such as small amount of memory and low power. IETF CoAP protocol can convert easily, and can use to monitor or control infrastructure utilities through low-power sensor and actuator networks in IoT (Internet of Things) and M2M (Machine-to-Machine) environment. IETF CoAP protocol provides the special requirements of this constrained environment, especially considering energy, automation, and other IoT applications. In this paper, we design and implement a node registration and discovering based CoAP in IoT environment. The node is a CoAP node which is designed for working in constrained environment. For node registration in IoT, we used CoRE RD (Resource Directory) functionalities to register CoAP node’s information which works in IoT environment.

In recent times, the internet of Things (IoT) is an alternative model that is quickly getting ground in the scenario of current wireless telecommunication. Wireless sensor network (WSN) is a significant part of IoT, and it is primarily accountable for reporting and acquiring information. As coverage area and lifetime of WSN directly define the performance of IoT, how to design a technique for conserving node energy and decreasing node death rate becomes crucial problem. Sensor network clustering is an efficient technique to overcome this problem. It splits nodes into clusters and chooses one to be cluster head (CH). The data communication and transmission within single cluster are accomplished by its CH. This study develops a hybrid evolutionary algorithm-based energy efficient cluster head selection (HEA-EECHS) technique in the IoT environment. The presented HEA-EECHS technique concentrates on the effectual choice of CHs in the IoT environment. To do so, the HEA-EECHS technique derives an improved artificial jellyfish search algorithm (IAJSA) by the incorporation of oppositional based learning (OBL) approach into the traditional AJSA. Along with that, the HEA-EECHS technique designs a fitness function incorporating four parameters namely energy, cluster node density, average neighboring distance, and average distance to BS. The experimental assessment of the HEA-EECHS technique is investigated under several IoT nodes and the final results gives the value of 500 WMNs, the HEA-EECHS method has attained decreased CMO of 0.0015. The simulation output highlighted the improvised efficacy of the HEA-EECHS technique.

여러 사물 인터넷 기기들을 조합, 활용하여 다양한 서비스를 제공할 수 있게 된 환경에서 추천시스템은 사용자가 원하는 서비스를 선택하는 데 있어 도움을 줄 수 있다. 기존의 추천 시스템에 대한 많은 연구는 주로 개인 사용자 대상의 추천에 집중되어 있으나 사물 인터넷 환경에서는 개인과 그룹 모두 사용자가 될 수 있으므로 그룹에 대한 추천 방법이 필요로 하다. 본 연구는 사물 인터넷 환경에서 그룹사용자들의 서비스 선호도를 분석하고, 이를 바탕으로 특정 장소에서 서비스를 이용한 적이 없는 새로운 그룹 사용자에게 서비스를 추천할 수 있는 방법을 개발하였다. 본 연구에서는 그룹의 구성 정보를 기반으로 그룹들 간의 유사도를 측정하여 사용자 기반 협업 필터링을 적용하였다. 실험에서는 실제 사물 인터넷 테스트 베드 환경에서 수집된 데이터를 사용하였으며 실험 결과를 통해 제안한 서비스 추천 방법이 효과적임을 확인할 수 있었다.

The nodes in wireless sensor networks are energy-constrained and have limited bandwidth. In addition, communication links between nodes are unpredictable and unstable. These factors make the design of routing protocols for such a network very challenging. We propose a scalable, efficient and reliable routing protocol called EAR that provides reliable data delivery from nodes to hubs in a wireless sensor network. Simulation results have shown EAR outperforming existing routing protocols.KeywordsWireless Sensor NetworkData PacketMedium Access Control ProtocolPacket Delivery RatioRREQ PacketThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Information processing and information routing in wireless sensor network is one of the most important key area of recent research. Building an optimal routing protocol for information routing is a tough task in dealing with the sensor nodes. Information exchange can be done with the major possible way in order to provide a secure communication and reliable data delivery, here in this study we focus on routing protocol with reliable delivery. Hence we proposed a new algorithm/protocol which optimally routes the data packets from source to destination with efficient utilization of energy resources. The proposed protocol is based on next hop graph node in terms of reliable data packet routing by framing the route in the form of graphs. The simulation results showed in the performance analysis phase denotes the proposed method outperforms the existing routing protocol in terms of reliability and robustness in efficient routing. The proposed methodology achieves the connectivity and connectivity path in WSN which is critical in WSN.

The Internet of Things (IoT) is a fast-expanding network of smart heterogeneous objects. It refers to the physical devices that are capable of communicating with other physical devices. Unlike the wireless sensor networks (WSNs), IoT is connected to worldwide Internet that exposes it to global intrusion in addition to wireless attacks inside an IoT network. It is protected by cryptographic and network security techniques, but they are vulnerable to internal and external attacks. The IoT devices are resource constrained in terms of limited storage, battery, limited transmission range and processing. To protect these tiny devices from the inside and outside cyberattacks, we need a lightweight security system that can run efficiently and effectively on these IoT devices. We also need a system, which can identify the type of intrusion and trigger an alarm in intrusion scenario to take appropriate preventive measure. Hence, an Intrusion Detection System (IDS) plays an important role to prevent such cyberattacks in IoT. These devices can be static or mobile in an IoT environment; this must be considered while designing IDS for IoT system. This book chapter presents various IDSs for an IoT system and their comparisons in terms of detection rate, false positive and accuracy in both static and mobility of devices.

In the modern era, web data retrieval and data analytics play a crucial role for taking intelligent decisions in Internet of Things (IoT) environment. In IoT environment, various objects perform the tasks of sensing and computation for providing uninterrupted services (e.g., e-health, e- transportation, security access, etc.) to the end users. However, accessing the relevant and accurate information with reduced delay is still a challenging task in IoT environment. Although this aspect has been explored in the literature, the existing proposals have high complexity and require long time for accessing the relevant information from different IoT objects located across the globe. The information may be located across different web pages, which are linked together irrespective of their geographical locations. So, this paper addresses the issues such as accuracy, context- aware, reduced delay with low complexity in accessing the information from a remote device by the end users. In the proposed scheme, the strength of a web page which contains the relevant information to be fetched is judged by the quality of content and the inter- connections between different web pages. The proposed scheme simplifies the rank score calculation of these web pages and provides quality web pages at the top of the search result pages by demoting spam web pages. Bias connected web pages are verified by the linkage information of spam web pages. The Quality Assessment for Information Retrieval (QAIR) algorithm is proposed for the classification of web pages. The proposed algorithm computes the QAIR score by evaluating the web page quality. Microsoft Learning to Rank dataset has been used for the experiments, which consists of 239092 query-url pairs. By using this dataset, the computed QAIR score is compared with the PageRank score. This comparison determines the category of web page, i.e., either the page is strong or weak. The proposed scheme has been validated with decision tree followed by ten- fold cross validation, which results in an accuracy of 92.4%.

As one of the freshest technologies nowadays, the development of Internet of Things is attracting more and more concerns. Internet of Things is able to connect all the items to Internet via information technology such as RFID and Wireless Sensor Network, in order to realize intelligent identification and management. It is supposed in Internet of Things environments, satisfactory services can be provided through any devices or any networks, whenever it is demanded. It makes that not only PC device but also other small devices with intelligence can be connected to the same network. As a result, It is much more convenient for people to obtain real-time information and then to take corresponding actions.

Energy efficiency is critical in Wireless Sensor Networks (WSNs), pivotal for Internet of Things (IoT) applications like environmental monitoring and smart cities. Clustering protocols like Low-Energy Adaptive Clustering Hierarchy (LEACH) extend network lifetime through Cluster Head (CH) rotation, but random CH selection often leads to suboptimal energy use. This study evaluates eight hybrid Particle Swarm Optimization-based LEACH (PSO-LEACH) variants to optimize CH selection and clustering: FA-PSO-LEACH (Firefly Algorithm), CSA-PSO-LEACH (Crow Search Algorithm), PSO-LEACH with CBTEERA, Adaptive PSO-LEACH, ABC-PSO-LEACH (Artificial Bee Colony), ACO-PSO-LEACH (Ant Colony Optimization), WOA-PSO-LEACH (Whale Optimization Algorithm), and Hybrid GA-PSO-LEACH (Genetic Algorithm). The primary research objective is to compare these variants in terms of energy efficiency, network lifetime, and clustering quality to identify the most effective strategies for prolonging WSN operation in IoT environments. Specifically, this paper addresses the research question: Which hybrid PSO-LEACH variant provides the optimal balance between early-stage stability and long-term energy conservation in a simulated WSN with 50 nodes? Each variant uses a unique metaheuristic for CH selection based on residual energy and distance, with PSO refining clustering. A Python simulation modelled a 100m × 100m WSN with 50 nodes, assessing network lifetime (First Node Died, FND; Half Nodes Died, HND; Last Node Died, LND), energy consumption, and clustering quality. Results show ABC-PSO-LEACH leading with FND at 57 rounds and LND at 462 rounds, followed by WOA-PSO-LEACH (HND 148, LND 406), surpassing others (e.g., PSO-LEACH with CBTEERA: FND 10, LND 280). WOA-PSO-LEACH’s balanced energy distribution excels in mid-to-late stages, despite computational overhead. These bio-inspired hybrids outperform traditional LEACH, with ABC-PSO-LEACH and WOA-PSO-LEACH ideal for prolonged WSN operation. Future work aims to enhance early-stage performance and explore dynamic topologies.