- Research Article
29
- 10.1016/0360-5442(91)90089-5
Summary of Gas-Cooled reactor programs
- Jan 01, 1991
- Energy
- A.J Goodjohn
Summary of Gas-Cooled reactor programs
Since the national Gas-Cooled Fast Breeder Reactor Program has been terminated, this document is the last progress report until reinstatement. It is divided into three sections: Core Flow Test Loop, GCFR shielding and physics, and GCFR pressure vessel and closure studies. (DLC)
Summary of Gas-Cooled reactor programs
Summary of Gas-Cooled reactor programs
Gas-Cooled Fast Breeder Reactor. Quarterly progress report, August 1-- October 31, 1972
The tasks of the Gas-Cooled Fast Breeder Reactor (GCFR) program supported by the U. S. Atomic Energy Commission are program planning, core development, development of pressure equalization system for fuel rods, fuels and materials development, and nuclear analysis and reactor physics. Core development work included structural and thermal analyses of the fuel element assembly, studies of the effects of fuel hot-pressing with burnup on fuel temperature, development of an analytical model for the monitor station instrumentation for the pressure equalization system, and further criticality studies of the lower shield assembly. Work on the planning document for the pressure equalization system for the fuel rods was initiated. In fuels and materials development, the status of the thermal-flux and fast-flux irradiation programs are given. The results of post-irradiation examinations to date of the GB-9 fuel rod irradiated in the thermal flux of the ORR and of the G-3 fuel rod irradiated in the EBR-II fast flux are given. Reactor physics studies included critical assembly analysis, in particular, calculations of small-sample worths, Doppler worth, β<sub>eff</sub> and prompt lifetime, and the conversion to ENDF/B Version III for GCFR calculations.
Read moreTSPEC: a computer program to predict approximate model performance in the core flow test loop
The computer program TSPEC was developed to provide a relatively simple, approximate analysis for predicting the performance of Gas-Cooled Fast Breeder Reactor (GCFR) model core assemblies in the Core Flow Test Loop (CFTL). The test specifications will list the steady-state and transient input parameters, including the time functions of power and flow for each test run; TSPEC will predict the resultant test parameters. The structure of the code is explained and the following user information is provided: input instructions, sample calculations, a code listing, and an index of code variables.
Read moreGas-cooled fast breeder reactor steady-state irradiation testing program
The requirements for the gas-cooled fast breeder reactor irradiation program are specified, and an irradiation program plan which satisfies these requirements is presented. The irradiation program plan consists of three parts and includes a schedule and a preliminary cost estimate: (1) a steady-state irradiation program, (2) irradiations in support of the design basis transient test program, and (3) irradiations in support of the GRIST-2 safety test program. Data from the liquid metal fast breeder reactor program are considered, and available irradiation facilities are examined.
Read moreReport to the Congress: liquid metal fast breeder reactor program--past, present, and future, Energy Research and Development Administration
The past, present, and future of the liquid metal fast breeder reactor (LMFBR) program, the Nation's highest priority energy program, are studied. ERDA anticipates that the operation of the first large commercial breeder will start in 1987, and that 186 commercial-size breeders will be in operation by the year 2000. The breeder program is made up of six major areas, each dealing with an important element of technology: reactor physics; fuels and materials; fuel recycle; safety; component development; plant experience; and facilities used in the LMFBR program. ERDA is implementing a new system for administering, managing, and controlling the breeder program that will provide increased program visibility and control. Federal funding for breeder development was $168 million in FY 1971, accounting for 40% of the total Federal R and D energy budget; in FY 1976 Federal funding for this program will be $474 million, only 26% of total Federal funding for energy research. Besides Federal funds, over half a billion dollars have been or will be invested by industry over the next 5 to 10 years to develop the breeder and to build a demonstration plant. Five other nations--the United Kingdom, France, Japan, West Germany, and the Soviet Union--have a high priority national energy program for developing the LMFBR. These foreign breeder programs could contribute important data and information to the U.S. program. (BYB)
Read moreAdvancements in the Helium-Cooled Pebble Bed Breeding Blanket for the EU DEMO: Holistic Design Approach and Lessons Learned
The helium-cooled pebble bed (HCPB) blanket is one of the two concepts proposed as a driver blanket for the European Union Demonstration Fusion Power Reactor (EU DEMO). In contrast to past conceptual design studies, in the frame of the current Power Plant Physics and Technology of the EUROfusion Consortium, the ongoing EU DEMO preconceptual design activities have adopted a holistic and integrated (i.e., systems engineering) design approach. As a consequence of this new approach, many interfaces and requirements have been identified, some of them driving the design of the blankets. This paper shows the advancements in the HCPB breeding blanket and describes the lessons learned after implementing the new approach. This new set of requirements has led us to reconsider fundamental aspects of the HCPB blanket design, especially in the way of how the heat is extracted from the blanket. Among others, the requirement to achieve a mature balance of plant (BOP) system plays a central role as a key design driver and has forced us to reduce pressure drops in the breeding blanket. In this regard, the blanket has been redesigned, leading to an enhanced concept based on single-module segments with a hexagonal matrix of fuel-breeder pins. Both the fuel-breeder pins and the first wall (FW) are equipped with turbulence promoters (augmented wall roughness in the fuel-breeder pins and V-ribs in the FW), following a similar idea as in the past MAGNOX, Advanced Gas Reactor (AGR), and Gas Cooled Reactor (GCR) programs in fission. This has led to minimizing the pressure drops while maximizing the heat transfer. Also, the blanket outlet temperature has been extended to 520°C, following the same principle as in Generation IV’s GCRs of maximizing the temperature difference across the core to minimize the reactor mass flow rate and thus the circulating power. All these features have led to a remarkably low plant circulating power (80 to 90 MW) and the required power per helium blower (5 to 6 MW), which potentially solves the key long-standing problem of the BOP technology readiness level for an ≈2.4-GW(thermal) helium-cooled DEMO reactor.
Read moreGas-cooled reactor programs. High-temperature gas-cooled reactor base-technology program progress report for July 1, 1975--December 31, 1976
Progress is reported in the following areas: prestressed concrete pressure vessel development, structural materials, fission product technology, kernel migration and irradiated fuel chemistry, coolant chemistry (steam-graphite reactions), fuel qualification, and characterization and standardization of graphite.
Read moreA Critical Experiment Program for the 300-MW(e) Gas-Cooled Fast Breeder Reactor: Scope and Purpose
A program of critical assembly experimentation in support of the Gas- Cooled Fast Breeder Reactor (GCFR) Program is outlined. Specific tasks needed for early resolution of GCFR design uncertainties are delineated and a brief program of critical assembly work that draws heavily upon the national LMFBR work is outlined. The scope of the program needs for special materials and equipment is examined and a preliminary design for the first assembly is presented. (31 references) (auth)
Read moreGAS-COOLED REACTOR AND THORIUM UTILIZATION PROGRAMS. Semiannual Progress Report for Period Ending September 30, 1970
GAS-COOLED REACTOR AND THORIUM UTILIZATION PROGRAMS. Semiannual Progress Report for Period Ending September 30, 1970
Advanced Vessel Cooling System Concept for High-Temperature Gas-Cooled Reactors
The high-temperature gas-cooled reactor (HTGR) program will be attractive to a broad range of owner / operators and meet public acceptance if the future HTGRs would be completely free from accidents, which cause a significant release of radioactivity into the environment. An advanced vessel cooling system concept, in which there is no heat loss in normal operation and the decay heat is removed by the natural circulation of air in an accident, is proposed for the High-Temperature Engineering Test Reactor to meet this requirement. The depressurization accident, one of the severest accidents of the HTGR, is selected and the analysis shows no significant core heatup. Applicability to the future HTGR is also investigated.
Read moreGAS-COOLED REACTOR PROGRAM SEMIANNUAL PROGRESS REPORT FOR PERIOD ENDING MARCH 31, 1963
Progress is reported on the development of gas-cooled reactors. The report contains eleven sections which are abstracted separately in NSA. These sections are contained in two parts: investigations in support of the Experimental Gas-Cooled Reactor and advanced reactor design and development. The four sections abstracted under Part I are: performance analyses, component development and testing, materials development, and irradiation testing of components and materials. The remaining sections are under Part II and they are: development of fueled-graphite bodies, investigations of fueled-graphite systems, clad fuel development, investigations of moderator materials, studies of advanced systems, experimental investigations of heat transfer and fluid flow, and facilities and equipment. (N.W.R.)
Read moreGas-Cooled Fast Breeder Reactor. Quarterly progress report, February 1, 1976--April 30, 1976
The tasks of the gas-cooled fast breeder reactor (GCFR) program include development of GCFR fuel, blanket, and control elements; development of the pressure equalization system for GCFR fuel; out-of-pile loop facility test program planning; fuels and materials development; fuel, blanket, and control rod analyses and development; nuclear analysis and reactor physics for GCFR core design; shielding requirements for the GCFR; reactor engineering to assess the thermal, hydraulic, and structural performance of the core and the core support structure; plant systems control; development of reactor components, including reactor vessel, control and locking mechanisms, fuel handling equipment, core support structure, shielding assemblies, main helium circulator, steam generator, and auxiliary circulator; development of a helium circulator test facility; and reactor safety, including an in-pile safety evaluation program.
Read moreGas-cooled fast breeder reactor accident initiation and progression analysis. Progress report, July 1, 1975--June 30, 1976
A program of safety studies for the gas-cooled fast breeder reactor (GCFR) is being performed. This program involves analyses of the progression of very-low-probability sequences of events which would lead to loss of in-place coolable core geometry (core disruptive accidents) and their consequences. These studies are being performed at General Atomic (GA) and Argonne National Laboratory (ANL); corresponding analyses of accident probabilities are being carried out at GA. This report presents a summary of the work performed at GA on the probabilistic analysis of accident sequences which have the potential for initiating a loss of in-place coolable core geometry.
Read morePreliminary thermal analysis of the 300-MW(e) gas-cooled fast breeder reactor grid plate
A preliminary thermal analysis of the 300-MW(e) gas-cooled fast breeder reactor (GCFR) grid plate was performed to predict the radial and axial grid plate temperature distributions and to provide input for thermal stress analysis. Gamma heating rates calculated by Oak Ridge National Laboratory were used. The maximum predicted temperatures for the GCFR grid plate are under 427/sup 0/C (800/sup 0/F); therefore, the requirements of Division 1 of Section III of the ASME Boiler and Pressure Vessel Code apply, and there is no need to use the more complex requirements of the high-temperature code case, No. 1592. The thermal stresses resulting from the temperature distributions are currently being evaluated. If these stresses prove to be excessive, several methods can be used to make the grid plate temperature distribution more uniform and, thus, reduce the thermal stresses.
Read moreThe Tower Shielding Facility: Its glorious past
The Tower Shielding Facility (TSF) is the only reactor facility in the US that was designed and built for radiation-shielding studies in which both the reactor source and shield samples could be raised into the air to allow measurements to be made without interference from ground scattering or other spurious effects. The TSF proved its usefulness as many different programs were successfully completed. It became active in work for the Defense Atomic Support Agency (DASA) Space Nuclear Auxiliary Power, Defense Nuclear Agency, Liquid Metal Fast Breeder Reactor Program, the Gas-Cooled and High-Temperature Gas-Cooled Reactor programs, and the Japanese-American Shielding Program of Experimental Research, just to mention a few of the more extensive ones. The history of the TSF as presented in this report describes the various experiments that were performed using the different reactors. The experiments are categorized as to the programs which they supported and placed in corresponding chapters. The experiments are described in modest detail, along with their purpose when appropriate. Discussion of the results is minimal, but references are given to more extensive topical reports.
Read more