Genetic algorithms for feature relevance assignment in memory-based language processing

One of the important practical applications of computer vision techniques is computer-aided diagnosis (CAD) in medical imaging. It has been shown that CAD can improve the accuracy of breast cancer detection and characterization by radiologists on mammograms. In this chapter, we discuss an important step — feature selection — in classifier design for CAD algorithms. Feature selection reduces the dimensionality of an available feature space and is therefore often used to prevent over-parameterization of a classifier. Many feature selection techniques have been proposed in the literature. We will illustrate the usefulness of genetic algorithms (GAs) for feature selection by comparing GA with a commonly used sequential selection method. A brief introduction to the GA is given and several examples using GA feature selection for the characterization of mammographic lesions are discussed. The examples illustrate the design of a fitness function for optimizing classification accuracy in terms of the receiver operating characteristics of the classifier, the dependence of GA performance on its evolution parameters, and the design of a fitness function tailored to a specific classification task.

Long Short-Term Memory (LSTM) networks are unique to exercise data in its memory cell with long-term memory as Natural Language Processing (NLP) tasks have inklings of intensive time and computational power due to their complex structures like magnitude language model Transformer required to pre-train and learn billions of data performing different NLP tasks. In this paper, a dynamic chaotic model is proposed for the objective of transforming neurons states in network with neural dynamic characteristics by restructuring LSTM as Chaotic Neural Oscillatory-Long-Short Term Memory (CNO-LSTM), where neurons in LSTM memory cells are weighed in substitutes by oscillatory neurons to speed up computational training of language model and improve text classification accuracy for real-world applications. From the implementation perspective, five popular datasets of general text classification including binary, multi classification and multi-label classification are used to compare with mainstream baseline models on NLP tasks. Results showed that the performance of CNO-LSTM, a simplified model structure and oscillatory neurons state in exercising different types of text classification tasks are above baseline models in terms of evaluation index such as Accuracy, Precision, Recall and F1. The main contributions are time reduction and improved accuracy. It achieved approximately 46.76% of the highest reduction training time and 2.55% accuracy compared with vanilla LSTM model. Further, it achieved approximately 35.86% in time reduction compared with attention model without oscillatory indicating that the model restructure has reduced GPU dependency to improve training accuracy.

The goal of the feature selection process is, given a dataset described by n attributes (features), to find the minimum number m of relevant attributes which describe the data as well as the original set of attributes do. Genetic algorithms have been used to implement feature selection algorithms. Previous algorithms presented in the literature used the predictive accuracy of a specific learning algorithm as the fitness function to maximize over the space of possible feature subsets. Such an approach to feature selection requires a large amount of CPU time to reach a good solution on large datasets. This paper presents a genetic algorithm for feature selection which improves previous results presented in the literature for genetic-based feature selection. It is independent of a specific learning algorithm and requires less CPU time to reach a relevant subset of features. Reported experiments show that the proposed algorithm is at least ten times faster than a standard genetic algorithm for feature selection without a loss of predictive accuracy when a learning algorithm is applied to reduced data.

The advances in deep learning have led to great achievements in many Natural Language Processing (NLP) tasks. With the nature of language, i.e., sequential data, most NLP tasks can be framed into the sequence learning framework, such as text generation. As one of the most important foundations for modern NLP techniques, autoregressive generation models have achieved dominant performance in a great deal of NLP tasks. Therefore, this thesis emphasizes improving the autoregressive generation model for different NLP tasks. While many tasks can naturally fit into the sequence learning framework, some of them, e.g., building discourse parsing tree, require sophisticated designs to fit into neural models. Therefore, this thesis firstly emphasizes a novel unified framework for discourse parsing, which builds a discourse tree in a top-down depth-first manner, and it frames the task as an autoregressive generation task with the goal of each step being the prediction of the node position given a piece of text. The proposed approach is proven effective with extensive empirical experiments. In addition, I extend the above framework by proposing a hierarchical decoder, which leverages the information from parents and siblings of the nodes that are currently processed. The proposed decoder utilizes the nature of the tree structure and further improves the experiment performance on both discourse parsing and dependency parsing tasks. On the other hand, the de facto strategies, i.e., cross entropy loss and teacher forcing, for training the autoregressive generation models have been shown problematic in certain aspects. For example, cross entropy loss, which is one of the widely leveraged training objective functions, often leads to text degeneration in text generation, and teacher forcing suffers from the exposure bias problem, where there exists a mismatch between the training and testing setup. For text degeneration, I introduce a class of diminishing attentions, which enforces the submodularity of the coverage calculated by cross attention in the sequence-to-sequence model. The proposed diminishing attentions achieve notable improvement on several neural text generation tasks, including text summarization, machine translation, and image paragraph generation. Further, I propose a novel training objective, ScaleGrad, to replace cross entropy, which significantly reduces the degeneration problem in different text generation tasks. In fact, ScaleGrad can be extended to problems beyond text degeneration. It provides wide flexibility to inject different inductive biases into the text generation model by directly modifying the gradient information in the output layer. Next, for the exposure bias problem, this thesis introduces a novel type of scheduled sampling based on training accuracy, which requires only minimal hyper-parameter tuning compared to existing scheduled sampling methods. Additionally, a novel imitation loss is proposed to further enforce the model’s generative behavior to match the teacher-forced behavior. Moreover, this thesis demonstrates that reducing exposure bias can improve the robustness of language models against repetition and toxic errors.

Text extraction is an important part of natural language processing (NLP) tasks. Most NLP tasks like text classification, machine translation, text-to-speech, text-based language identification, text summarization, and named-entity recognition involve the use of textual data. Such data is limited for low-resourced languages making it difficult to experiment advanced NLP techniques on these languages. This paper presents a Python-based toolkit for text analysis and text extraction from different types of images, documents, and audio files. The toolkit is built as a library that has functions that can be imported and utilized for text extraction.

Towards a Novel Weakly Supervised Joint Approach of Named Entity Recognition and Normalization for Noisy Text

A belt conveyor roller defect detection method based on genetic algorithm feature selection and stacking learning was proposed. Roller defect data from 1620 samples of three types of roller defects was first collected. To improve the detection efficiency of roller defects, a feature selection method based on a genetic algorithm for selecting roller defect features was proposed. The model classification efficiency of roller features after feature selection by the genetic algorithm was found to be higher. The feature subset with the highest fitness had a feature number of 35. A stacking learning model for detecting roller defects was also constructed. The stacking method enhanced the comprehensive performance of the base learner model for detecting roller defects. The stacking learning model finally achieved a classification accuracy of 94.86% on the roller defect dataset. The classification performance of the stacking learning model was better than that of its base learning model. The results showed that the stacking learning model was preferred for detecting roller defects. The proposed conveyor belt roller defect detection method, while achieving high accuracy, may be limited by potential overfitting and sensitivity to environmental conditions. The next steps in refining the conveyor belt roller defect detection method will focus on dataset expansion, algorithm parameter tuning, and environmental robustness testing.

With the massive expansion of information in social media, a high demand exists for information retrieval techniques. The recognition of the named entity (NE) such as person, location, organization, etc. has emerged as one of the main tasks in natural language processing. Often, utilizing the entire feature set may not only be time-consuming but may also have a negative effect on performance. Due to the high number of features, it is difficult to identify the subset of features relevant to a given task. In this paper, we apply feature selection methods based on the support vector machine recursive feature elimination (SVM-RFE) to find the optimized feature set. Afterward, an optimized feature set combination is used to identify and classify named entities (NEs) based on the Support Vector Machine (SVM). The proposed method is evaluated using Darwish’s dataset (a publicly available benchmark for Arabic NER for social media). Experimental results demonstrate the effectiveness of feature selection in enhancing performance and outperform the most advanced systems

In this paper, we present the preliminary results on the analysis of deep learning terms used for natural language processing (NLP) tasks. We propose a statistical analysis of papers published from 2012 to 2015 in the main ACL conferences. Our aim is investigating which DL term, and consequently which DL method, is mostly used for each specific NLP task, since its introduction in the field. In order to do this, our first contribution is the development of two terminological lists, referring respectively to DL methods for text analysis and NLP tasks. The list of deep learning terms contains 41 terms and acronyms, as well as a NLP term list contains 145 terms and acronyms. From our corpus, the frequencies of various terms have been extracted with respect to the ACL conference and the publication year. After the preliminary data analysis, we decided to restrict the extraction process to abstract texts. We applied multivariate techniques called correspondence analysis in order to visualize and evaluate the joint behavior of our variables.

In this study, we explore the potential of machine learning (ML) models after different text representation methods on the balanced IMDB dataset, which is widely regarded as a gold standard in sentiment analysis, one of the Natural Language processing (NLP) tasks. On the open source IMDB movie reviews dataset, we first undertake data cleaning and text representation with data preprocessing steps. Then, we apply sentiment classification using different ML models. In order to evaluate the models, we used precision (P), recall (R), F1-score (F1), and area under curve (AUC), as well as receiver operating characteristic (ROC). It is worth noting that text feature extraction with Bidirectional Encoder Representations from Transformers (BERT) provided the highest performance in all models, with the SVM model offering particularly promising results. In this model, we observed the following results: ACC 0.9033, F1 0.9308, R 0.9015, R 0.9015, P 0.9072, AUC 0.9638, and ROC 0.96. These findings suggest that NLP techniques and, in particular, machine learning models that employ BERT may offer high levels of accuracy and reliability in text classification problems. It would be beneficial for future studies to validate these findings using BERT on different NLP tasks. This would help to evaluate the effectiveness and applicability of the models in practice.

Work orders, equipment information, technical records and best practices documents contain within them a wealth of insights related to Equipment Maintenance which can be unlocked with Natural Language Processing tasks like classification, clustering, named entity recognition or part of speech tagging. But obtaining large enough labelled data sets in Equipment Maintenance domain manually is prohibitive and very expensive. This lack of labeled Equipment Maintenance data can be overcome with Large Language Models (LLMs) such as GPT-3, BERT that are pretrained transformer networks, considered state-of-the-art when it comes to Natural Language Processing (NLP) tasks. However, the vocabulary understood by these LLMs are mostly from English Language and need to be fine-tuned to understand industry and organization specific vocabulary and acronyms. This paper explores the potential of a domain specific LLM model for oil and gas industries. Data that are of good quality and that provide a comprehensive overview of industry are collected. This corpus of text contains documents like work orders, equipment data and technical documents. A custom tokenizer is trained on this data to identify domain specific terminology. A comparative study is done with other off-the-shelf tokenizers: BERT and RoBERTa, to compare the effectiveness of the tokenization. With millions of work orders and equipment documents, training pipelines had to parallelized so that training can occur on multiple GPUs. A comprehensive study of multiple training methods is done in this paper. Model and tokenizer developed were packaged and archived to be consumed in machine learning pipelines to specific use-cases across the organization. For an organization adopting digital transformation, the availability of an organization specific LLM is an enabler to extract insights from millions of documents containing free text. The applicability of such models spans across multiple disciplines like Maintenance, Reliability, Safety etc. and streamlines the development of highly accurate and robust text analytics.

Feature selection (FS) method is applied for extracting only the relevant information from the dataset. FS seemed to be an optimization concept because appropriate feature selection is the significant role of any classification problem. Similarly, feature weighting is employed to enhance the classification performance along with FS process. In this paper, feature selection and feature weighting has been performed by integrated an optimization algorithm called tunicate swarm genetic algorithm (TSGA) with deep residual network (DRN). TSGA is the combination of tunicate swarm algorithm (TSA) and genetic algorithm (GA) incorporated to increase the performance of the classifier. This wrapper method-based feature selection and feature weighting techniques are performed to reduce the computation time as well as complexity. The effectiveness of the proposed method is estimated and compared with different methods such as TSA, CS-GA, and PSO-GA. The performance of DRN classifier is also validated and compared to existing classifiers like KNN, C4.5, and RF.

Towards a Novel Weakly Supervised Joint Approach of Named Entity Recognition and Normalization for Noisy Text

Many tasks in natural language processing like offensive, toxic, or emotional text classification are subjective by nature. Humans tend to perceive textual content in their own individual way. Existing methods commonly rely on the agreed output values, the same for all consumers. Here, we propose personalized solutions to subjective tasks. Our four new deep learning models take into account not only the content but also the specificity of a given human. The models represent different approaches to learning the representation and processing data about text readers. The experiments were carried out on four datasets: Wikipedia discussion texts labelled with attack, aggression, and toxicity, as well as opinions annotated with ten numerical emotional categories. Emotional data was considered as multivariate regression (multitask), whereas Wikipedia data as independent classifications. All our models based on human biases and their representations significantly improve the prediction quality in subjective tasks evaluated from the individual’s perspective.

Word embeddings have become the predominant representation scheme on a token-level for various clinical natural language processing (NLP) tasks. More recently, character-level neural language models, exploiting recurrent neural networks, have again received attention, because they achieved similar performance against various NLP benchmarks. We investigated to what extent character-based language models can be applied to the clinical domain and whether they are able to capture reasonable lexical semantics using this maximally fine-grained representation scheme. We trained a long short-term memory network on an excerpt from a table of de-identified 50-character long problem list entries in German, each of which assigned to an ICD-10 code. We modelled the task as a time series of one-hot encoded single character inputs. After the training phase we accessed the top 10 most similar character-induced word embeddings related to a clinical concept via a nearest neighbour search and evaluated the expected interconnected semantics. Results showed that traceable semantics were captured on a syntactic level above single characters, addressing the idiosyncratic nature of clinical language. The results support recent work on general language modelling that raised the question whether token-based representation schemes are still necessary for specific NLP tasks.