Genetic-Inspired Map Matching Algorithm for Real-Time GPS Trajectories

Many location-based services require a pre-processing step of map matching. Due to the error of the original position data and the complexity of the road network, the matching algorithm will have matching errors when the complex road network is implemented, which is therefore challenging. Aiming at the problems of low matching accuracy and low efficiency of existing algorithms at Y-shaped intersections and roundabouts, this paper proposes a space-time-based continuous window average direction feature trajectory map matching algorithm (STDA-matching). Specifically, the algorithm not only adaptively generates road network topology data, but also obtains more accurate road network relationships. Based on this, the transition probability is calculated by using the average direction feature of the continuous window of the track points to improve the matching accuracy of the algorithm. Secondly, the algorithm simplifies the trajectory by clustering the GPS trajectory data aggregation points to improve the matching efficiency of the algorithm. Finally, we use a real and effective data set to compare the algorithm with the two existing algorithms. Experimental results show that our algorithm is effective.

With the increasing availability of GPS-equipped mobile devices, location-based services have become an integral part of everyday life. Among one of the initial steps of positioning data management, map matching aims to reduce the uncertainty in a trajectory by matching the GPS points to the road network on a digital map. Most existing work has focused on estimating the likelihood of a candidate route based on the GPS observations, while neglecting to model the probability of a route choice from the perspective of drivers. In this work, we propose a novel feature-based map matching algorithm that estimates the cost of a candidate route based on both GPS observations and human factors. To take human factors into consideration is highly important, especially when dealing with low sampling rate data where most of the movement details are lost. Additionally, we simultaneously analyze a subsequence of coherent GPS points by utilizing a new segment-based probabilistic map matching strategy, which is less susceptible to the noisiness of the positioning data. We have evaluated both the offline and the online versions of our proposed approach on a public large-scale GPS dataset, which consists of 100 trajectories distributed all over the world. The experimental results show that our method is robust to sparse data with large sampling intervals (e.g., 60s ∼ 300s) and challenging track features (e.g., u-turns and loops). Measurements including map matching accuracy and system efficiency have been thoroughly evaluated and discussed. Compared with two state-of-the-art map matching algorithms, our method substantially reduces the route mismatch error by 6.4% ∼ 32.3% (either offline or online with the window size set to 360s), with a slight increase in terms of the processing time. The experimental results show that our proposed method obtains the state-of-the-art map matching results in all the different combinations of sampling rates and challenging features.

Aiming at the problems of complex urban road network, low efficiency of logistics distribution, and the difficulty of large-scale logistics distribution area division and routing planning, this paper proposes a two-stage logistics distribution vehicle routing optimization (VRP) method based on the establishment of a multi-factor complex road network constrained logistics distribution mathematical model. Considering the complex traffic elements and road network topological structure in logistics and distribution, in the first stage, a heuristic simulated annealing (HSA) distribution region partitioning algorithm is proposed with the objective of balancing vehicle task load to divide the urban logistics distribution network under complex road networks, so as to reduce the area scale and path search cost. In the second stage of route decision making, aiming at minimizing the total cost of logistics distribution, combining the VRP problem with complex road network conditions, a heuristic path search method combined with complex road network model constraints is proposed. In this stage, a hybrid genetic beam search(HGBS) algorithm is used to plan the path nodes, reduce the randomness of the model in the initial search for paths by heuristic genetic algorithms, then combine with Beam graph search methods to reduce the space and time used for the search, and use optimization algorithms to improve the accuracy of independent sub-region routing optimization and the rationality of overall physical distribution route selection. Finally, the proposed method is validated in this paper with two practical cases. The experimental results show that the two-stage decision-making algorithm proposed in this paper has certain advantages in partitioning schemes, minimizing total cost and iteration times. Through comparison, the optimization ability of this method for logistics distribution networks is proved.

Map matching is the process of finding a match for each GPS point in a vehicle's trajectory to roads on a digital map. Extensive research has been conducted during the last years yielding many algorithms based on different approaches. One of the challenges that face those algorithms is the interruption of GPS signals that occurs specially in dense urban environments. In these cases on-board sensors like odometers and accelerometers can be used temporarily for positioning, however due to the poor accuracy of these methods, the quality of map matching decreases significantly. In this paper, we propose a method that improves the quality of map matching when GPS signals are not available. This method is based on a particle filter using heading and velocity measurement. We evaluate this method through its integration with an existing topological map matching algorithm. We compare the performances when this algorithm is used alone and when associated with the particle filter.

GPS (Global Positioning System) has become an integral part of a vehicle system which provides speed, time, direction etc besides the navigation data. Speed is one of the primary attributes of vehicle accident. Many lives could have been saved if emergency service could receive accident information timely. This paper proposes to detect an accident from the map matched position of a vehicle by utilizing the GPS speed data and map matching algorithm and send accident location to an Alert Service Center. The GPS provides speed and position in every 0.1 second. The position data will be used in the map matching algorithm to locate the vehicle on the road. The present speed will be compared with the previous speed in every 0.1 second through a Microcontroller Unit. Whenever the speed will be falling below the safe calculated threshold speed, the system will generate an accident situation. It will check the vehicle location from map matching module and generate an accident situation if the vehicle is found outside the road network. This will reduce the false accident detection drastically. The map matched accident location is then sent by utilizing the GSM network. The proposed system will save many accident victims with timely rescue.

Map matching can provide useful traffic information by aligning the observed trajectories of vehicles with the road network on a digital map. It has an essential role in many advanced intelligent traffic systems (ITSs). Unfortunately, almost all current map-matching approaches were developed for GPS trajectories generated by probe sensors mounted in a few vehicles and cannot deal with the trajectories of massive vehicle samples recorded by fixed sensors, such as camera detectors. In this paper, we propose a novel map-matching model termed Fixed-MM, which is designed specifically for fixed sensor data. Based on two key observations from real-world data, Fixed-MM considers (1) the utility of each path and (2) the travel time constraint to match the trajectories of fixed sensor data to a specific path. Meanwhile, with the laws derived from the distribution of GPS trajectories, a path generation algorithm was developed to search for candidates. The proposed Fixed-MM was examined with field-test data. The experimental results show that Fixed-MM outperforms two types of classical map-matching algorithms regarding accuracy and efficiency when fixed sensor data are used. The proposed Fixed-MM can identify 68.38% of the links correctly, even when the spatial gap between the sensor pair is increased to five kilometers. The average computation time spent by Fixed-MM on one point is only 0.067 s, and we argue that the proposed method can be used online for many real-time ITS applications.

Locating devices on the road network is crucial for any location-based system. Accuracy of map matching algorithms may highly affect the accuracy of any location-based service. This paper includes an empirical review of five major map matching algorithms for locating a device on a digital road network. A standard dataset was used to simulate the working of map matching algorithms. After ascertaining the accuracy of map matching algorithms, it was tested on a real road network. Six different routes varying from 0.6 kilometers to 32 kilometers, covering a total distance of 82.2 kilometers were included in the experiment. Performance of map matching algorithms was evaluated on a total of 2094 road nodes with 1271070 Global Positioning System (GPS) points on the basis of matched, unmatched nodes with root mean square error. It was concluded that Hidden-Markov Model based map matching algorithms has reasonably good accuracy (96% using global data and 89% using Indian dataset) and execution time in comparison to geometric, topological, Kalman filter and Frechet distance based algorithms.

Genetic algorithm (GA) has been extensively used in recent decades to solve many optimization problems in various fields of science and engineering. In most cases, the number of iterations is the only criterion which is used to stop the GA. In practice, this criterion will lead to prolong execution times to ensure proper solution. A novel approach is presented in this article as the approximate number of decisive iterations (ANDI ) which can be used to successfully terminate the GA optimization method with minimum execution time. Two simple correlations are presented which relate the new parameter (ANDI ) with approximate degrees of freedom (Adf ) of the merit function at hand. For complex merit functions, a linear smoother (such as Regularization network) can be used to estimate the required Adf. Four illustrative case studies are used to successfully validate the proposed approach by effectively finding the optimum point by using to the presented correlation. The linear correlation is more preferable because it is much simpler to use and the horizontal axis represents the approximate (not exact) degrees of freedom. It was also clearly shown that the Regularization Networks can successfully filter out the noise and mimic the true hyper-surface underlying a bunch of noisy data set.

In this research, a passenger-centric passenger information system is proposed, which uses crowd sourcing and mobile phones so that passengers are not only information consumers but are also providers of information to the system. Passengers can allow the system to track their location through their smart phones when they are traveling on public transportation; this will compensate for the lack of a vehicle tracking system in public transportation, particularly in nonurban areas. Map-matching (MM) algorithms integrate location data (i.e.,latitude and longitude) obtained from positioning sensors (in this case, mobile GPS) with a digital geographic information system (GIS) road map. Any map-matching algorithm first identifies the road link on which a vehicle is traveling and then determines the vehicle's location on that road segment. In the proposed information system, at a given point of time, a number of vehicle locations (latitude and longitude) are received from passengers traveling on a bus. In order to provide a precise vehicle location at a given point of time, a novel map-matching algorithm using fuzzy logic, which integrates multiple vehicle locations (obtained from passenger's smart phones) with a GIS road map, has been developed. The developed map-matching algorithm was tested using real-world data collected on four different bus routes in Aberdeenshire, Scotland, and also GPS data collected in and around Nottingham, United Kingdom. It was identified that the developed MM algorithm is efficient and capable of supporting the proposed passenger information system. (C) 2013 American Society of Civil Engineers.

Numerous map-matching techniques have been developed to improve positioning, using Global Positioning System (GPS) data and other sensors. However, most existing map-matching algorithms process GPS data with high sampling rates, to achieve a higher correct rate and strong universality. This paper introduces a novel map-matching algorithm based on a hidden Markov model (HMM) for GPS positioning and mobile phone positioning with a low sampling rate. The HMM is a statistical model well known for providing solutions to temporal recognition applications such as text and speech recognition. In this work, the hidden Markov chain model was built to establish a map-matching process, using the geometric data, the topologies matrix of road links in road network and refined quad-tree data structure. HMM-based map-matching exploits the Viterbi algorithm to find the optimized road link sequence. The sequence consists of hidden states in the HMM model. The HMM-based map-matching algorithm is validated on a vehicle trajectory using GPS and mobile phone data. The results show a significant improvement in mobile phone positioning and high and low sampling of GPS data.

Airport information weak current system is the core of airport terminal, which is responsible for information interaction, power resource and energy consumption management among subsystems of airport terminal. Meanwhile, it is also responsible for main business dispatch management of entire airport terminal. Therefore, starting with basic ant colony algorithm and considering respective advantages of genetic and ant colony algorithms, optimization cycle of the two algorithms is introduced multiple times in this paper. Moreover, after each loop iteration of ant colony algorithm, optimal solution generated by ant colony algorithm will be added to genetic algorithm so that iterative speed of genetic algorithm can be accelerated. Meanwhile, solution calculated by genetic algorithm will be set to better path to update pheromone allocation in ant colony algorithm and achieve parameter adjustment. Experimental test proves that geneticant colony hybrid algorithm proposed in this paper has good convergence and solution efficiency, which can find the shortest path with suitable conditions in complex road networks.

Parallelization is the key method to speedup advanced driving assistance systems (ADAS) and autonomous vehicle applications especially using emerging multicore and manycore processors. Localization and map matching are among the fundamental parts of such applications. This paper presents a parallel implementation and performance analysis of particle filter based vehicle localization and map-matching algorithm both on a multicore processor using Open Multi-Processing (OpenMP) and on a graphics processing unit (GPU) using the Compute Unified Device Architecture (CUDA). In the proposed implementation, GPS and odometer data is fused with digital map information. Tests were performed on real data captured in vehicle environment comprising various speed and road conditions. Test results show that speedups up to 75 times can be achieved on parallel GPU implementation over sequential counterpart. As this speedup complies with real-time performance requirements, high computational cost of using map topology information with large number of particles in particle filter implementation is proven to be handled by emerging technologies. The effect of number of particles on error rate of localization and map matching is also investigated.

In Modern Era, many researchers are working to upgrade real time position tracking systems. Tracking systems fully depend on an appropriate road network and reliability of tracking vehicle data. The map matching concept provides intersection links between road segments. Map matching performance depends on GPS trajectory, but, it is unreliable due to weak GPS signalling issues such as atmospheric delay, multipath signalling, and ionospheric delay in the Indian mass. GPS Aided GEO Augmentation System (GAGAN) provides reliable signals services for correct positioning finding in the Indian mass. This work proposed map matching algorithm that computing closest point on the road network and also addresses the challenge of real time position mapping including position techniques.

Map matching is a technique used to identify which path a vehicle is travelling on in a road map. Since it is a crucial fundamental step for a wide range of transportation applications, many map-matching algorithms have been devised ranging from simple geometric calculation methods to more sophisticated methods. However, the study of spatial relationship patterns between GPS coordinates and road segments mapped with map-matching has not received enough attention from researchers. This paper presents a framework, called Proxy Map Matching (PMM), to learn such patterns using machine learning techniques. However, we find that solely employing machine learning techniques on such data is not sufficient to capture the patterns. Solving this problem that way results in an inaccurate proxy model. In PMM, we construct several proxy map matchers and assign them to each group of data based on their spatial proximity, thereby achieving accuracy improvement. An experiment on real-world data shows that the framework achieves above 85% accuracy with integration of machine learning techniques, and outperforms the methods which solely employ machine learning techniques significantly. Moreover, the proposed proxy model can perform very fast matching. For 14,177 GPS coordinate pairs per second, we achieve 88.4% accuracy.

This paper introduces the its-car navigation system prototype we developed under the context of Singapore. In the system, integrated GPS/DR is used for continuous vehicle positioning. A digital road network map database is built for the whole Singapore. The database is designed to support map matching, route determination, and route guidance functions. The prototype system demonstrates GPS positioning of the vehicle in real-time, tracking the vehicle onto a digital map with fix updates every one or two seconds. With the map matched vehicle location on the map, voice and/or text guidance is provide to the driver. The vehicle position can also be transferred to control center through communication data link for the purpose of fleet management.