Geometric Analysis Based Double Closed-Loop Iterative Learning Control of Output PDF Shaping of Fiber Length Distribution in Refining Process

ABSTRACTIn this article, to tackle with the iteration-varying trail lengths and random initial state shifts, an average operator-based PD-type iterative learning control (ILC) law is firstly presented for linear discrete-time multiple-input multiple-output (MIMO) systems with vector relative degree. The proposed PD-type ILC law includes an initial rectifying action against initial state shifts, and pursues the reference trajectory tracking beyond the initial time points. As special cases of the PD-type ILC law, P-type and D-type ILC laws are then introduced. It is proved that for linear discrete-time MIMO systems with vector relative degree, the three proposed ILC laws can drive the varying trail lengths-based ILC tracking errors to zero in mathematical expectation beyond the initial time points. A numerical example is used to illustrate the effectiveness of the proposed ILC laws.

Stochastic distribution control (SDC) for non-Gaussian system is a mathematically complicated yet practical problem to solve. The most recent solution involves a radial basis function neural network (RBFNN) framework to approximate non-Gaussian output probability density function (PDF). The dynamic weights of such neural network are controlled within each batch of ILC, using a dedicated adaptive controller. Then, between adjacent batches, an iterative learning control (ILC) algorithm is applied to tune RBFNN centres and widths. The most practical ILC-based SDC applications use sum of squared PDF tracking errors (calculated within each batch of ILC) to tune RBFNN parameters through so called P-type ILC laws. This paper first analyses the practical disadvantages of P-type ILC laws to use in SDC applications which include robustness, sensitivity, and operational problems. Then, based on the gradients of squared PDF tracking errors (calculated within batches), it develops a new ILC-based non-Gaussian stochastic control. Simulation results demonstrate the effectiveness of proposed gradient descent optimisation method for non-Gaussian stochastic distribution control.

An iterative learning control algorithm within prescribed input-output subspace

In this article, we propose a data-driven iterative learning control (ILC) framework for unknown nonlinear nonaffine repetitive discrete-time single-input-single-output systems by applying the dynamic linearization (DL) technique. The ILC law is constructed based on the equivalent DL expression of an unknown ideal learning controller in the iteration and time domains. The learning control gain vector is adaptively updated by using a Newton-type optimization method. The monotonic convergence on the tracking errors of the controlled plant is theoretically guaranteed with respect to the 2-norm under some conditions. In the proposed ILC framework, existing proportional, integral, and derivative type ILC, and high-order ILC can be considered as special cases. The proposed ILC framework is a pure data-driven ILC, that is, the ILC law is independent of the physical dynamics of the controlled plant, and the learning control gain updating algorithm is formulated using only the measured input-output data of the nonlinear system. The proposed ILC framework is effectively verified by two illustrative examples on a complicated unknown nonlinear system and on a linear time-varying system.

This paper presents model reference adaptive control (MRAC) approach to control the shape of output distribution in non-Gaussian stochastic systems. The method is based on Iterative Learning Control (ILC) and employs a neural network framework for controller design. The output probability density function (PDF) tracking problem is first reduced to dynamic neural network (NN) weight control. It is assumed that the dynamic behaviour of such weights is nonlinear and unknown. To apply the ILC-based tuning, the control horizon is split up to certain number of intervals hereinafter called batches. The proposed ILC method is comprised of two main modes, namely within each batch and between any two adjacent batches, and includes three stages; (a) NN-based nonlinear dynamic system identification ( b) MRAC of the weight control loop within each batch, and (c) Tuning the RBF centers, widths, and controller neural network parameters between any two adjacent batches. Simulation results confirm the effectiveness of the method.

In this paper, an adaptive iterative learning control (AILC) law is developed for two-link rigid-flexible coupled manipulator system in three-dimensional (3D) space with time-varying disturbances and input constraints. Based on the Hamilton’s principle, a dynamic model of a manipulator system is established. The conditional equation that is coupled by ordinary differential equations and partial differential equations is derived. In order to achieve high-precision tracking of the revolving angles and vibration suppression of the elastic part, the iterative learning control law based on the disturbance observer is considered in the process of the design controller. The composite Lyapunov energy function is proposed to prove that the angle errors and elastic deformation can eventually converge to zero with the increase of the number of iterations. Ultimately, the simulation results to rigid-flexible coupled manipulator system are given to prove the convergence of the control objectives under the adaptive iterative learning control law.

The 2D state space system model is established with state delay and actuator faults, and what is more, the iterative learning control (ILC) law required by the batch process model is designed. Using the knowledge of 2D system theory and an iterative learning control law, the 2D state space model can be changed into an equivalent 2D-Roesser closed-loop system model. According to the optimized cost function and Lyapunov stability theory, sufficient conditions for the solvability of model predictive control (MPC) problems in the form of linear matrix inequalities (LMIs) are given. A new solution is proposed which depends on the bound of the state delay. At last, the effectiveness of the method is proved through simulation experiments.

This article investigates the iterative learning control problem for a class of nonlinear heterogeneous multi-agent systems. The main contribution of this article is to apply iterative learning control algorithm to the multi-agent systems with multiple leaders, and solve the containment control problem of multi-agent systems in the sense of iterative learning control stability. Based on the framework of communication topologies, distributed iterative learning controllers are designed. And when the iterative learning control laws are applied to the systems, the containment errors between the followers’ states and the convex hull spanned by the leaders’ states over a finite-time interval are bounded, and furthermore, the containment errors can converge to zero as the iteration index approaches to infinity in the absence of initial errors. A simulation example is finally constructed to verify the effectiveness of the theoretical method.

Fault diagnosis for wireless sensor is very important to ensure signal acquisition precision. Radial basis function (RBF) neural network has strong classification ability. However, the selection of the connection weights, the hidden centers and the widths has an important influence on the classification performance of the RBF neural network in the learning process of RBF neural network. Thus, ant colony optimization is employ to gain the parameters of radial basis function neural network. Therefore, a novel method for fault diagnosis of wireless sensor based on RBF neural network and ant colony optimization is presented. The results of computational experiments show that ACO- RBF neural network has a great higher than RBF neural network.

In this paper, a new iterative learning algorithm is proposed for repetitive nonlinear systems. The control system employs a combination of state feedback and iterative learning control (ILC) in which the coefficients of states are learned similar to ILC methods. The control system is in a closed loop format both in iteration domain (because of ILC) and in time domain (because of feedback control) which improves the robustness of the conventional ILC. The convergence of the control algorithm is also proved. Finally, simulation results for a 5-DOF manipulator have been presented to illustrate that the proposed algorithm is more robust than a first order P type ILC method at the presence of white Gaussian noise as a nonrepeating disturbance.

The repetitive processing and large quantity of single product represented by 3C products are urgently needed. However, for current processing operations, previous processing data have not been used in the optimization of control input. In order to utilize previous processing data to facilitate the next process and avoid adverse effects caused by repetitive disturbance and noise, the idea of iterative learning was introduced to improve the accuracy of machining. On the control level, since it is difficult to obtain high accuracy by traditional feedback control when faced with complex trajectories, an open-loop iterative learning controller and a position loop feedback controller were introduced, which worked fast with good convergence effects. Aiming at reducing the influence of accidental error, step type iterative learning was put forward. The iteration mechanism was stopped when the accuracy converged to the allowable range so as to reduce computational complexity, store the current iterative part of the control input, and make constant value compensation. However, in simulation and experiment, it was found that after superposition of the iterative learning controller, the phenomenon of partial divergence of the system tracking error occurred. Therefore, the speed and acceleration characteristics of input trajectories in time domain and frequency domain were analyzed. High-frequency noise was introduced in frequency domain, which was found to be the cause of the abovementioned phenomenon, and high-frequency components were filtered to solve the problem. To further improve the accuracy of convergence and avoid filtering effective high-frequency information in some area, a switchable filter based on the analysis of the frequency characteristics of input trajectory was proposed. Through SIMULINK simulation and dSPACE experimental verification, it was proved that the iterative learning controller of modifying controlled quantity and filter based iterative learning control method are effective.

Iteration dependent interval based open‐closed‐loop iterative learning control for time varying systems with vector relative degree

In the process of moisture content's measurement with microwave resonant cavity based on RBF (radial basis function) neural network, the relationship among resonant frequency, quality factor and environmental temperature (the inputs of network) and moisture content (the output of network) is multiple non-linear. The performance of multiple non-linear regression algorithm is the major factor that determines the accuracy of measurement. A regression algorithm based on a RBF neural network is put forward to improve the measurement result in this paper. The RBF neural network regression algorithm can effectively avoid the BP algorithm disadvantages such as getting into local minimum and the low efficiency, and has the advantages such as high generalization precision and rapid convergence. Consequently, the measurement accuracy is enhanced. In this paper, experimental results show that the high-precision measurement value of moisture content can be obtained with the multiple non-linear regression algorithm based on RBF neural network.

Since they were first introduced by Arimoto, iterative learning control (ILC) methods have received lots of attention because of their effectiveness and briefness. In this paper, an open-closed-loop PID-type ILC scheme with bounded learning matrixes for the control of nonlinear time-varying systems are studied. Under a few reasonable restrictions that are very common, as in other ILC research papers on the convergence problem, sufficient conditions for guaranteeing the convergence of ILC systems are given and then proved with linear operator theory. Both the system and the ILC scheme described have very general forms. It is shown that the convergence condition is weaker than some known results for a similar ILC scheme.

Optimal Iterative Learning Control for Batch Processes Based on Linear Time-varying Perturbation Model