• Home
  • Search
  • Geophysical Research on Rock Mass Quality Evaluation for Infrastructure Design
  • Cite Icon12
  • https://doi.org/10.1029/2021ea002017Copy DOI Icon

Geophysical Research on Rock Mass Quality Evaluation for Infrastructure Design

Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

Abstract Evaluation of rock mass quality is necessary for the proper design of engineering infrastructures. Rock quality designation (RQD) is an important geotechnical parameter in the rock mass quality classification. However, given the limited data and natural heterogeneity, rock mass quality evaluation is a challenging task. Traditionally, the rock mechanical parameters are obtained from the drilling tests. However, the drilling tests only provide single‐point information and thus cannot provide detailed underground information. Moreover, boreholes are costly and time‐consuming, and still cannot be carried out in the steep topographic terrains. Alternatively, electrical resistivity tomography (ERT) is non‐invasive, cost‐effective, and user‐friendly, can provide 2D plane information even 3D information, and can bridge gaps between the available well data and the accurate subsurface geological model. In this research, we establish important empirical relations between ERT and the limited borehole data. We estimated RQD along with the ERT profiles and evaluated the subsurface for rock mass quality even where no borehole exits. Furthermore, the ambiguity of water/clay distinction in the geological model was removed via integration between ERT and induced polarization. Compared with the past geotechnical studies, our work provides far better insights into the subsurface via 2D/3D evaluation of rock mass quality for the development of the engineered structures. Therefore, geophysical research based on ERT can be very helpful in the hard rock terrains lacking sufficient mechanical well data.

Similar Papers
  • Research Article
  • Citations10

Hard-rock investigation using a non-invasive geophysical approach

  • Sep 07, 2022
  • Journal of Applied Geophysics
  • Muhammad Hasan +1
  • PDF
  • Research Article
  • Citations59

Application of electrical resistivity tomography (ERT) for rock mass quality evaluation

  • Dec 01, 2021
  • Scientific Reports
  • Muhammad Hasan +4
  • PDF
  • Research Article
  • Citations21

Research on Rock Mass Quality Classification Based on An Improved Rough Set–Cloud Model

  • Jan 01, 2019
  • IEEE Access
  • Jiachuang Wang +1
  • Research Article
  • Citations23

Determination of rock mass integrity coefficient using a non-invasive geophysical approach

  • Jun 01, 2023
  • Journal of Rock Mechanics and Geotechnical Engineering
  • Muhammad Hasan +4
  • Research Article
  • Citations37

Geophysical evaluation of geological model uncertainty for infrastructure design and groundwater assessments

  • Feb 05, 2022
  • Engineering Geology
  • Muhammad Hasan +1
  • Research Article
  • Citations38

Rock mass quality classification based on deep learning: A feasibility study for stacked autoencoders

  • Jul 01, 2023
  • Journal of Rock Mechanics and Geotechnical Engineering
  • Danjie Sheng +5
  • Research Article
  • Citations6

Rock Mass Quality Evaluation Based on Unascertained Measure and Intuitionistic Fuzzy Sets

  • Apr 27, 2020
  • Complexity
  • Shuliang Wu +2
  • Research Article
  • Citations11

A novel approach to determine rock mechanical parameters using non-invasive geophysical methods

  • Oct 29, 2022
  • International Journal of Rock Mechanics and Mining Sciences
  • Muhammad Hasan +4
  • Research Article
  • Citations3

KNN METHOD FOR INTELLIGENT OBSERVATIONAL CLASSIFICATION OF ROCK MASS QUALITY IN TUNNEL

  • Dec 01, 2020
  • 工程地质学报
  • Shenghua Ma +5
  • Research Article
  • Citations103

A correlation between P-wave velocity, number of joints and Schmidt hammer rebound number

  • Jul 01, 2001
  • International Journal of Rock Mechanics and Mining Sciences
  • S Kahraman
  • Research Article
  • Citations25

Characteristics and rippability conditions of near-surface lithologic units (Penang Island, Malaysia) derived from multimethod geotomographic models and geostatistics

  • Jun 09, 2022
  • Journal of Applied Geophysics
  • Adedibu Sunny Akingboye +1
  • Research Article
  • Citations10

Electrical resistivity imaging data for hydrogeological and geological hazard investigations in Taiwan

  • Jul 07, 2023
  • Data in Brief
  • Ping-Yu Chang +5
  • PDF
  • Research Article
  • Citations1

Classification Method of Rock Structure and Rock Mass Quality of Surface Granite: Geological Disposal of High-Level Radioactive Waste in China

  • Jan 01, 2022
  • Adsorption Science & Technology
  • Wei Xiang +2
  • Research Article
  • Citations4

Prediction of Deep Rock Mass Quality and Spatial Distribution Law of Open-pit Gold Mine Based on 3D Geological Modeling

  • Feb 03, 2021
  • Geotechnical and Geological Engineering
  • Zhigang Tao +5
  • PDF
  • Research Article
  • Citations23

Joint Investigation and 3D Visual Evaluation of Rock Mass Quality

  • Jan 01, 2020
  • Advances in Civil Engineering
  • Haiping Yuan +4
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.