- Book Chapter
- 10.1016/b978-0-444-86531-1.50008-1
I - Utility functions
- Jan 01, 1983
- Applied Consumption Analysis
- Louis Phlips
I - Utility functions
The following ‘reflexion property’ of Giffen behaviour is proved: the two‐good direct utility function (DUF) obtained by reversing the sign of two‐good indirect utility function (IUF) displays Giffen behaviour with respect to one of the two goods if and only if the IUF itself displays Giffen behaviour with respect to the other good. A particular IUF showing Giffen behaviour for both goods (in non‐overlapping regions of the price space) is constructed and the reflexion property is verified. The example IUF is extended to more than two goods, and Giffenity is verified in this case.
I - Utility functions
I - Utility functions
Welfare variations and the comparative statics of demand
By employing order-theoretic comparative statics, we provide necessary and sufficient conditions on the direct utility function (alternatively, on the indirect utility function) to guarantee that the compensating and equivalent variations are monotonically increasing in income. We also show that these conditions are sufficient to guarantee normal demand. Our results do not depend on the smoothness or strict quasiconcavity of the utility function, and can be extended to a setting with non-linear prices.
Read moreThe Dual Structure of Incomplete Demand Systems
Integrability of incomplete demand systems is discussed. The concepts of weak integrability, quasi‐expenditure function, quasi‐indirect utility function, and quasi‐utility function are defined. Their relationships to the expenditure function, indirect utility function, and utility function are developed. The dual structure of the quasi‐functions permits exact welfare analysis and reveals the conditional preference structure for the commodities of interest. New results relating the uniqueness and exactness of consumer's surplus to the structure of the expenditure and indirect utility functions are obtained.
Read moreIndirect utility function
After many independent discoveries that were widely separated in time and space, the indirect utility function has in the last 35 years gradually become a standard part of demand theory. Its first discovery was made as early as 1886 by Antonelli in Italy, who also derived what has come to be known as Roy’s Identity (see Chipman’s introduction to the translation of Antonelli (1886) in Chipman et al. 1971). Later contributions came from Konyus (1924), Konyus and Byushgens 1926) and Byushgens in Russia, from Hotelling (1932) and Court (1941, pp. 284–97) in the United States, from Roy (1942, 1947) and Ville (1946) in France, and from Wold (1943–4) and Malmquist (1953) in Sweden; a good brief history may be found in Diewert (1982, pp. 547–50).
Read moreWhen is a tax neutral?
When is a tax neutral?
On the Optimality of Full Disclosure
A privately informed sender can commit to any disclosure policy toward a receiver, whose actions affect the utility of the sender. We show that full disclosure is optimal under a sufficient condition with some desirable properties. First, it speaks directly to the parties' utility functions, as opposed to the sender's indirect utility function; this makes it easily interpretable and verifiable. Second, it does not require the sender's payoff to be a function of the posterior mean state. Third, it is weaker than the conditions obtained in the literature for some specific settings.
Read moreTheoretical Impact of AI on Working Hours and Wage Rate
This chapter assesses the correlation between AI expansion and its influence on diverse economic factors like labor supply, wage rates, and working hours. In the subsequent segment, the authors explore the connection between the utility function and the derived hours equation. Unlike the direct utility indicators of leisure and consumption, indirect utility functions are represented through income/wage rates or prices. These models and diagrams are developed by the authors to illustrate the correlation between income/consumption and its association with the balance between working hours and leisure hours. This chapter encompasses diverse models predicated on specific assumptions, contingent on market demand and supply scenarios.
Read moreSustainability of Onchocerciasis Control Program in Benin : a methodological approach
The aim of Onchocerciasis Control Program (OCP) is to eliminate onchocerciasis disease of public health problem and as an obstacle to socioeconomic development; it incumbent on the participating countries to maintain this achievement. The primary purpose of this study is focus on the sustainability of Onchocerciasis control program in Benin. This study has designed a methodological approach to analyze the conditions in which the program can be sustained. Hypothetical data has also been used in the study to test how the models work. The results of the evaluation of the approach using these hypothetical data are not to be taken directly as granted for policy implications. This methodological approach shows us a way to obtain onchocerciasis control demand function and the elasticity of the demand, by using money metric indirect utility function and Cobb-Douglas utility function. The study reveals the utility for rich and poor regarding onchocerciasis control and the factors that influence ability to pay (ownership of property, type of saving, source of income, family size), willingness to pay (level of knowledge about the disease, level of exposure, priority ranking, risk of contracting onchocerciasis, transportation cost) and community involvement (perceived benefits of ivermectin, community leadership, designing the distribution system, availability of credible distributor, integration with local health system). Also this study reveals that, the above factors can shift onchocerciasis control demand curve. The result of such studies will help health planners and policy makers of the government to make a decision regarding the set of price of onchocerciasis treatment by year 2002 using the marginal utility analysis. Further work on empirical study on the model built in this study is also required. In conclusion, this approach though designed with sustainability of onchocerciasis control as the focus could also be used in many other endemic disease control strategies. Though this methodological approach has some limitations, its strength lies in its possible practical uses as an operational tool.
Read moreThe Monotonicity of Individual and Market Demand
This paper studies the monotonicity of individual and market demand with the aid of the indirect utility function. We identify sufficient (and in a sense, necessary) conditions on an agent's indirect utility which will guarantee that he has a monotonic demand function. Our conditions also point to a natural way of extending the result of Hildenbrand (1983). Hildenbrand showed that market demand is monontonic if the income distribution has a downward sloping density, even though individual agents' demand function might violate monotonicity. Using the indirect utility function, we introduce a measure of violations of individual monotonicity that allows us to identify a larger class of density functions that will generate a monotonic market demand.
Read moreA Closer Look at Decision and Analyst Error by Including Nonlinearities in Discrete Choice Models: Implications on Willingness-to-Pay Estimates Derived from Discrete Choice Data in Healthcare
Most researchers in health economics cite random utility theory (RUT) when analysing discrete choice experiments (DCEs). Under RUT, the error term is associated with the analyst's inability to properly capture the true choice processes of the respondent as well as the inconsistency or mistakes arising from the respondent themselves. Under such assumptions, it stands to reason that analysts should explore more complex nonlinear indirect utility functions, than currently used in healthcare, to strive for better estimates of preferences in healthcare. To test whether complex indirect utility functions decrease error variance for models that either implicitly (i.e. the multinomial logit (MNL) model) or explicitly (i.e. entropy multinomial logit (EMNL) model) account for error variance in health(care)-related DCEs; and to determine the impact of complex indirect utility functions on willingness-to-pay (WTP) measures. Using data from DCEs aimed at healthcare-related decisions, we empirically compared (1) complex and simple indirect utility specifications in terms of goodness of fit, (2) their impact on WTP measures, including confidence intervals (CIs) based on the Delta method, the Krinsky and Robb-procedure, and Bootstrapping, and (3) MNL and EMNL model results. Complex indirect utility functions had a better model fit than simple specifications (p<0.05). WTP estimates were quite similar across alternative specifications. The Delta method produced the most narrow CIs. The EMNL model showed that respondents apply simplifying strategies when answering DCE questions. Complex indirect utility functions reduce error arisen from researchers, which can have important implications for measures in healthcare such as the WTP, whereas EMNL provides insights into the behaviour of respondents when answering DCEs. Understanding how respondents answer DCE questions may allow researchers to construct DCEs that minimise scale differences, so that the decision error made across respondents is more homogeneous and therefore taken out as additional noise in the data. Hence, better estimates of preferences in healthcare can be provided.
Read moreGlobal restrictions on the parameters of the CDES indirect utility function
This paper extends the analytical and empirical application of the basic indirect utility function of Houthakker–Hanoch—called the CDES specification (constant differences of elasticities of substitution). The non-homothetic CDES preferences are the natural parametric extension on the global domain of the homothetic CES preferences with many commodities, and CDES can conveniently be used in specifying CGE multisector models with a demand side satisfying observable Engel curve patterns. Moreover, all Marshallian own-price elasticities are no longer restricted to exceed one, and positive and negative cross-price effects are allowed for in empirical demand analyses. Explicit calculations of the Allen elasticities of substitution are instrumental in demonstrating the economic implications of the parameters of indirect utility functions with global regularity properties and flexibility of the derived demand systems.
Read moreEquivalent variation with uncertain prices
Equivalent variation with uncertain prices
Consumer's Surplus, Price Instability, and Consumer Welfare
This paper evaluates the benefits to consumers from price stabilization in terms of the convexity-concavity properties of the consumer's indirect utility function. It is shown that in the case where only a single commodity price is stabilized, the consumer's preference for price instability depends upon four parameters: the income elasticity of demand for the commodity, the price elasticity of demand, the share of the budget spent on the commodity, and the coefficient of relative risk aversion. All of these parameters enter in an intuitive way and the analysis includes the conventional consumer's surplus approach as a special case. The analysis is extended to consider the benefits of stabilizing an arbitrary number of commodity prices. Finally, some issues related to the choice of numeraire and certainty price in this context are discussed.
Read moreMeasuring Price Risk Aversion through Indirect Utility Functions: A Laboratory Experiment
Measuring Price Risk Aversion through Indirect Utility Functions: A Laboratory Experiment
Undominated directions of tax reform
Undominated directions of tax reform