GPCNN: Evolving Convolutional Neural Networks using Genetic Programming

Recognition of human activity based on convolutional neural network has received the interest of researchers in recent years due to its significant improvement in accuracy. A large number of algorithms based on the deep learning approach have been proposed for activity recognition purpose. However, with the increasing advancements in technologies having limited computational resources, it needs to design an efficient deep learning-based approaches with improved utilization of computational resources. This paper presents a simple and efficient 2-Dimensional convolutional neural network (2-D CNN) architecture with very small size convolutional kernel for human activity recognition. The merit of the proposed CNN architecture over standard deep learning architectures is fewer trainable parameters and lesser memory requirement which enables it to train the proposed CNN architecture on low GPU memory-based devices and also works well with smaller as well as larger size datasets. The proposed approach consists of mainly four stages: namely (1) creation of dataset and data augmentation, (2) designing 2-D convolutional neural network (CNN) architecture, (3) the proposed 2-D CNN architecture trained from scratch up to optimum stage, and (4) evaluation of the trained 2-D CNN architecture. To illustrate the effectiveness of the proposed architecture several extensive experiments are conducted on three publicly available datasets, namely IXMAS, YouTube, and UCF101 dataset. The results of the proposed method and its comparison with other state-of-the-art methods [8-12,14,18-26,29-33] demonstrate the usefulness of the proposed method.

The convolutional neural network (CNN) architecture has shown remarkable success in image classification and segmentation. Its popularity has increased promptly due to various factors such as exponential growth in computational resources, availability of benchmark datasets, supporting libraries, and open-source software. The efficiency of CNN architecture majorly depends on the complexity of the architecture, availability of datasets, and hyperparameter selection. But, due to the huge number of parameters in CNN architecture, its selection has completely remained ad hoc in the past works. In this article, a novel encoding technique has been proposed that can represent complex CNN architecture effectively. The article defines basic building blocks to represent CNN architecture such as the genesis block, transit block, agile block, and output block. This encoding structure is used to generate dynamic length chromosome structure and initialized using evolutionary algorithms. A comparative analysis is also presented that shows compared its effectiveness with existing encoding representations on the basis of the number of encoding parameters, training cost, and efficiency.

In this paper, we study the performance of variants of well-known Convolutional Neural Network (CNN) architectures on different audio tasks. We show that tuning the Receptive Field (RF) of CNNs is crucial to their generalization. An insufficient RF limits the CNN's ability to fit the training data. In contrast, CNNs with an excessive RF tend to over-fit the training data and fail to generalize to unseen testing data. As state-of-the-art CNN architectures - in computer vision and other domains - tend to go deeper in terms of number of layers, their RF size increases and therefore they degrade in performance in several audio classification and tagging tasks. We study well-known CNN architectures and how their building blocks affect their receptive field. We propose several systematic approaches to control the RF of CNNs and systematically test the resulting architectures on different audio classification and tagging tasks and datasets. The experiments show that regularizing the RF of CNNs using our proposed approaches can drastically improve the generalization of models, out-performing complex architectures and pre-trained models on larger datasets. The proposed CNNs achieve state-of-the-art results in multiple tasks, from acoustic scene classification to emotion and theme detection in music to instrument recognition, as demonstrated by top ranks in several pertinent challenges (DCASE, MediaEval).

Every year, new Convolutional Neural Network (CNN) architectures appear to deal with different problems in the activity of image and video recognition. These architectures usually work along the ImageNet dataset for looking for the best performance of the CNNs without taking into account the video task where they are used. This can represent a problem if the task is Human Action Recognition (HAR) in video, since the CNN architectures are pre-trained with an image dataset that can practically contain any object, while HAR problem requires consecutive frames of people doing actions. To prove the idea that using CNNs pre-trained on an image dataset does not always achieve the best performance on a video dataset and that, therefore, it is worth comparing the performance of different CNNs under similar circumstances for the HAR problem, this work proposes an analysis between eight different CNN architectures. Each one of the CNN was exclusively trained with RGB images, which were extracted from the frames of the different classes of videos of HMDB51 dataset. To make the classification of an activity in video, we average the predictions taking into account the successes. We also made some ensembles with the best performance CNNs to measure the improvement in accuracy. Our results suggest that Xception is a strong baseline model that could be used by the community to make their comparisons of their proposals more robust.

Classification performance based on ImageNet is the de-facto standard metric for CNN development. In this work we challenge the notion that CNN architecture design solely based on ImageNet leads to generally effective convolutional neural network (CNN) architectures that perform well on a diverse set of datasets and application domains. To this end, we investigate and ultimately improve ImageNet as a basis for deriving such architectures. We conduct an extensive empirical study for which we train 500 CNN architectures, sampled from the broad AnyNetX design space, on ImageNet as well as 8 additional well-known image classification benchmark datasets from a diverse array of application domains. We observe that the performances of the architectures are highlydataset dependent. Some datasets even exhibit a negative error correlation with ImageNet across all architectures. We show how to significantly increase these correlations byutilizing ImageNet subsets restricted to fewer classes. These contributions can have a profound impact on the way we design future CNN architectures and help alleviate the tilt we see currently in our community with respect to over-reliance on one dataset.

Object classification has been one of the main tasks in computer vision. With the fast development of deep learning, its performance in image classification and object recognition has presented dramatic improvements. In this paper, we propose a new deep convolutional neural network (CNN) architecture for robust object classification. The proposed model is fused with three traditional CNN approaches, Densenet201, Resnet50, and our proposed residual CNN. The fused network architecture allows parallel processing of the multiple networks for keeping the system sped up. A single shot deep convolution network is trained as an object detector to generate all possible candidates of different object classes. The output of each neural network is representing a single vote that is used in the classification process. 3-to-1 voting criteria are applied in the final classification decision between the candidate object classes. Several experiments were conducted to evaluate the performance of the proposed network. The experimental results show that the proposed approach has better performance than the networks used in the fusion process when they act individually. It also has lower miss rates when compared to several states of art methodologies.

In this paper, the Convolutional Neural Network (CNN) architecture, which is one of the deep learning architectures, is used to classify the basic circuit components drawn by hand. During the training and testing stages of the model, a new dataset containing images of 863 circuit components manually drawn by different people is created. The data set contains images of four different classes of circuit components such as resistor, inductor, capacitor and voltage source. All images have been fixed to the same size and converted to grayscale to increase recognition performance and reduce process complexity. In the study, training for four classes is performed with CNN architecture. Based on the CNN architecture, four new CNN models are employed with different the number of layers. The training and validation results of these models are compared separately, the model with the highest training and validation performance is observed with four layer CNN model (CNN-4). This model obtained 84.41% accuracy rate at classification task.

This paper demonstrates image classification using deep learning. Deep learning has the inherent ability to automatically discover and extract meaningful features for specific applications. Among the popular techniques in deep learning, the convolutional neural network (CNN) stands out. CNN consists of an input layer, hidden layers, and an output layer, where meaningful features are automatically extracted from input images. This paper presents the performance and identifies the most effective CNN architectures for accurately classifying images in the CIFAR-10 dataset. Five CNN architectures were implemented, namely [Architecture 1], [Architecture 2], [Architecture 3], [Architecture 4], and [Architecture 5] using the CIFAR-10 dataset. The architectures were selected based on the need to explore variations in convolutional filter sizes, dense layers, and batch normalization to assess their impact on CIFAR-10 image classification performance. Each architecture was trained on a standard training set and evaluated on a validation set. We used specific details on data preprocessing and training settings for a consistent and fair comparison. After training and evaluation, we have obtained the following results for each architecture. Architecture 1 has a training accuracy of 74.7% and validation accuracy of 76.6%, Architecture 2 has 96.09% and 86.08%, Architecture 3 has 77% and 78.1%, Architecture 4 has 67.91% and 69.54%, and Architecture 5 has 94.64% and 87.34% of training accuracy and validation accuracy respectively. After conducting a comparative analysis, we found that Architecture 5 has achieved the highest validation accuracy in classifying images in the CIFAR-10 dataset. These findings suggest that Architecture 5 is a promising choice for image classification tasks involving the CIFAR-10 dataset.

Convolutional neural networks (CNNs) are currently one of the most popular image classification technologies. Their excellent image classification ability enables the prediction of the ash content in clean coal using coal flotation froth images. Herein, a scheme is proposed to predict the ash content in coal flotation concentrate using coal flotation froth images and CNN architecture. According to the ash content of the concentrate, the coal flotation froth image data set is divided into seven interval categories, and data augmentation is used to expand the data set. Then, several recently trained CNNs (ResNet, EfficientNet, EfficientNetV2, ConvNeXt) are used to classify the coal flotation froth images with different concentrate ash content interval (integer ±1%). The classification performance of each network model, relationship between model performance and hyperparameters, and the abstract pixel features of the best model are visualized. The EfficientNetV2-L network achieves the highest classification accuracy (99%) after fine-tuning. The results indicate that the CNNs are effective in predicting the ash content of clean coal by classifying coal flotation froth images. The optimized CNN model is applied to froth images in the industry, resulting in high classification performance, which demonstrates that the CNN has high potential for industrial applications.

Although font recognition is a fundamental issue in the field of document analysis and recognition, it was usually ignored in the past. With the development of optical character recognition (OCR), font recognition becomes more and more important. This paper proposed a well-designed convolutional neural network (CNN) architecture for traditional Mongolian font recognition by means of a single word. To be specific, the whole word image is regarded as input of CNN. Hence, the word images should be normalized into the same size before being inputted into CNN. By comparison, an appropriate aspect ratio for the traditional Mongolian word images has been determined. Experimental results demonstrate that the proposed CNN architecture outperforms three classic CNN architectures, including LeNet-5, AlexNet and GoogLeNet. Therefore, the proposed CNN is much more suitable for the task of the traditional Mongolian font recognition in the way of a single word.

The detection and classifications of weld images is important for improving the quality of the joined materials during production period. In order to automate the classification of weld images in industry, this paper proposes an effective automatic method for the detection and classifications of the weld images into four different cases using deep learning methods. In this work, Convolutional Neural Network (CNN) is adopted for the weld image classification by modifying the internal architecture of the CNN architecture. This proposed ResNet CNN architecture is designed with three Convolutional layers, two numbers of pooling layers with activation layer and two numbers of Fully Connected Neural Networks (FCNN).The FCNN in proposed CNN architecture is designed with 15 internal hidden layers and each hidden layer is designed with 20 neurons which obtains high classification efficiency. The morphological activity functional methods are used on the classified weld images to detect the crack regions.

Deep Learning (DL) is a fastest growing and a broader part of machine learning family. Deep learning uses Convolutional Neural Networks (CNN) for image classification as it gives the most accurate results in solving real- world problem. CNN has various pre-trained architecture like AlexNet, GoogleNet, DenseNet, SqueezeNet, ResNet, VGGNet etc. In this study, we have used CNN and AlexNet architecture for detecting the disease in Mango and Potato leaf and compare the accuracy and efficiency between these architectures. The dataset containing 4004 images were used for this work. The images for potato were taken from plantvillage website, while images for mango were collected from GBPUAT field location. The results show that accuracy achieved from AlexNet is higher than CNN architecture.

Bangla handwritten character recognition is a popular research topic as its difficulty is higher than the recognition of other languages because of multiple formats of compound characters. State of the art Convolutional neural network (CNN) architectures are very much useful in computer vision applications. Some works have been carried out in Bangla handwritten character recognition but most of them either not very efficient or they can not classify a lot of characters. In this work, state of art pre-trained CNN architectures is used to classify 231 different Bangla handwritten characters using CMATERdb dataset. The images were first converted to B&W form with white as the foreground color. The size of the images is reduced to 28 × 28 form. These images are used as input to the CNN architectures. The weights of the state-of-the-art CNN models are kept as it was. The training learning rate was set to 0.001 and categorical cross-entropy as the error function. After 50 epochs, InceptionResNetV2 achieved the best accuracy (96.99%). DenseNet121 and InceptionNetV3 also provided remarkable recognition accuracy (96.55 and 96.20%, respectively). We also considered combination of trained InceptionResNetV2, InceptionNetV3 and DenseNet121 architectures which provided better recognition accuracy (97.69%) than other single CNN architectures but it is not feasible for using as it requires a lot of computation power and memory. The models were tested in the cases where characters look confusing to humans, but all the architectures showed equal capability in recognizing these images. Considering computational complexity, memory and capability of recognizing confused characters, InceptionResNetV2 can be said as the best performing model.

Ultrasound (US) is the preferred modality for fatty liver disease diagnosis due to its noninvasive, real-time, and cost-effective imaging capabilities. However, traditional B-mode US is qualitative, and therefore, the assessment is very subjective. Computer-aided diagnostic tools can improve the specificity and sensitivity of US and help clinicians to perform uniform diagnoses. In this work, we propose a novel deep learning model for nonalcoholic fatty liver disease classification from US data. We design a multi-feature guided multi-scale residual convolutional neural network (CNN) architecture to capture features of different receptive fields. B-mode US images are combined with their corresponding local phase filtered images and radial symmetry transformed images as multi-feature inputs for the network. Various fusion strategies are studied to improve prediction accuracy. We evaluate the designed network architectures on B-mode in vivo liver US images collected from 55 subjects. We also provide quantitative results by comparing our proposed multi-feature CNN architecture against traditional CNN designs and machine learning methods. Quantitative results show an average classification accuracy above 90% over tenfold cross-validation. Our proposed method achieves a 97.8% area under the ROC curve (AUC) for the patient-specific leave-one-out cross-validation (LOOCV) evaluation. Comprehensive validation results further demonstrate that our proposed approaches achieve significant improvements compared to training mono-feature CNN architectures ([Formula: see text]). Feature combination is valuable for the traditional classification methods, and the use of multi-scale CNN can improve liver classification accuracy. Based on the promising performance, the proposed method has the potential in practical applications to help radiologists diagnose nonalcoholic fatty liver disease.

Convolutional Neural Network (CNN) architectures for the classification of remote sensing images have been in use for the last 6 years. These CNN architectures are preferred over other standard classifiers, such as SVM and Multilayer perceptron, due to their ability to automatically extract features from image patches. Recently, attention-based models have been used for remote sensing classification because of their ability to concentrate on a few relevant features while ignoring others. To mimic the behavior of the human retina’s ganglia neuron, the concept of On-Off Center-Surround (OOCS) filters has recently been introduced with CNN. This study is an attempt to use both OOCS and attention based deep learning architecture with CNN using two remote sensing datasets. Results suggest that the use of both OOCS and the attention layer does not improve classification accuracy in comparison to the CNN model only.