Grammar Morphisms and Weakly Adhesive Categories

Net processes correspond to derivation processes in graph grammars

Rewriting systems over adhesive categories have been recently introduced as a general framework which encompasses several rewriting-based computational formalisms, including various modelling frameworks for concurrent and distributed systems. Here we begin the development of a truly concurrent semantics for adhesive rewriting systems by defining the fundamental notion of process, well-known from Petri nets and graph grammars. The main result of the paper shows that processes capture the notion of true concurrency—there is a one-to-one correspondence between concurrent derivations, where the sequential order of independent steps is immaterial, and (isomorphism classes of) processes. We see this contribution as a step towards a general theory of true concurrency which specialises to the various concrete constructions found in the literature.KeywordsIsomorphism ClassDirect DerivationType ObjectGraph TransformationGraph GrammarThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Graph Rewriting Systems are a powerful formalism for the specification of parallel and distributed systems, and the corresponding theory is rich of results concerning parallelism and concurrency. I will review the main results of the theory of concurrency for the algebraic approach to graph rewriting, emphasizing the relationship with the theory of Petri nets. In fact, graph rewriting systems can be regarded as a proper generalization of Petri nets, where the current state of a system is described by a graph instead of by a collection of tokens. Recently, this point of view allowed for the generalization to graph rewriting of some interesting results and constructions of the concurrent semantics of nets, including processes, unfoldings, and categorical semantics based on pair of adjoint functors.KeywordsDirect DerivationGraph TransformationGraph GrammarAdjoint FunctorHost GraphThese keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

In the framework of graph transformation systems with Negative Application Conditions (NACs) the classical notion of switch equivalence of derivations is extended to permutation equivalence, because there are intuitively equivalent derivations which are not switch-equivalent if NACs are considered. By definition, two derivations are permutation-equivalent, if they respect the NACs and disregarding the NACs they are switch equivalent. A direct analysis of permutation equivalence is very complex in general, thus we propose a much more efficient analysis technique. For this purpose, we construct a Place/Transition Petri net, called dependency net, which encodes the dependencies among rule applications of the derivation, including the inhibiting effects of the NACs. The analysis of permutation equivalence is important for analysing simulation runs within development environments for systems modelled by graph transformation. The application of the technique is demonstrated by a graph transformation system within the context of workflow modelling. We show the effectiveness of the approach by comparing the minimal costs of a direct analysis with the costs of the efficient analysis applied to a derivation of our example system.

In order to model the behaviour of open concurrent systems by means of Petri nets, we introduce open Petri nets, a generalisation of the ordinary model where some places, designated as open, represent an interface between the system and the environment. Besides generalising the token game to reflect this extension, we define a truly concurrent semantics for open nets by extending the Goltz–Reisig process semantics of Petri nets. We introduce a composition operation over open nets, characterised as a pushout in the corresponding category, suitable for modelling both interaction through open places and synchronisation of transitions. The deterministic process semantics is shown to be compositional with respect to such a composition operation. If a net $Z_3$ results as the composition of two nets $Z_1$ and $Z_2$, having a common subnet $Z_0$, then any two deterministic processes of $Z_1$ and $Z_2$ that ‘agree’ on the common part, can be ‘amalgamated’ to produce a deterministic process of $Z_3$. Conversely, any deterministic process of $Z_3$ can be decomposed into processes of the component nets. The amalgamation and decomposition operations are shown to be inverse to each other, leading to a bijective correspondence between the deterministic processes of $Z_3$ and the pair of deterministic processes of $Z_1$ and $Z_2$ that agree on the common subnet $Z_0$. Technically, our result is similar to the amalgamation theorem for data-types in the framework of algebraic specification. A possible application field of the proposed constructions and results is the modelling of interorganisational workflows, recently studied in the literature. This is illustrated by a running example.

Firstly, net theory, which is a well established theory of distributed systems and processes [I] relies heavily on a graphical notation. One of the strengths of this theory is that many of the fundamental notions concerning concurrent systems and in particular, the dynamics of a concurrent systemcan be made transparent with the help of simple net diagrams and transformations of such diagrams. It is important to provide a solid formal foundation to this aspect of net theory and graph grammars appear to be the obvious tool for doing so. The second motivation is that in the study of concurrency problems that arise within the area of graph grammars [2] we think it is possible and fruitful to apply the concepts and techniques of net theory.

Process versus unfolding semantics for Place/Transition Petri nets

We introduce infinitary partial languages for Petri nets and study some of their properties. Earlier results on the interrelation between various Petri net semantics for finite behaviour are shown to be valid for infinite behaviour. As a consequence step sequences and event structures of processes both can be taken as a semantics for Petri nets without any loss of information.Via the introduction of infinite partial words it is possible to express the properties of justice and fairness in a natural way: justice can be characterized as maximality of progress and fairness as ‘fair’ conflict resolution. By this we overcome the ambiguity arising from the lack of discrimination between concurrency and non-determinism in the sequential approach.

This paper introduces MOCHY, a tool designed for the modeling of concurrent systems with variants of stochastic, timed and hybrid Petri nets. Beyond modeling, the tool serves as a platform for fast simulation, and can be used for statistical verification of properties, controller testing, and learning of control rules. The targeted models are variants of stochastic and timed nets where tokens can be continuous quantities depicting trajectories of moving objects. The architecture of the tool is designed to be as adaptive as possible, and allow the redefinition of objects behaviors or transitions firing through the refinement of a few semantic rules. The framework also allows for the integration of controllers. For any model variant, MOCHY can perform fast simulation, and perform statistical verification, evaluate some quantitative properties of a model, or learn control rules for reachability or quantitative objectives.

Petri nets are known to be useful for modeling concurrent systems. Once modeled by a Petri net, the behavior of a concurrent system can be characterized by the set of all executable transition sequences, which in turn can be viewed as a language over an alphabet of symbols corresponding to the transitions of the underlying Petri net. In this paper, we study the language issue of Petri nets from a computational complexity viewpoint. We analyze the complexity of theregularity problem(i.e., the problem of determining whether a given Petri net defines an irregular language or not) for a variety of classes of Petri nets, includingconflict-free,trap-circuit,normal,sinkless,extended trap-circuit,BPP, andgeneralPetri nets. (Extended trap-circuit Petri nets are trap-circuit Petri nets augmented with a specific type ofcircuits.) As it turns out, the complexities for these Petri net classes range from NL (nondeterministic logspace), PTIME (polynomial time), and NP (nondeterministic polynomial time), to EXPSPACE (exponential space). In the process of deriving the complexity results, we develop adecomposition approachwhich, we feel, is interesting in its own right, and might have other applications to the analysis of Petri nets as well. As a by-product, an NP upper bound of the reachability problem for the class of extended trap-circuit Petri nets (which properly contains that of trap-circuit (and hence, conflict-free) and BPP-nets, and is incomparable with that of normal and sinkless Petri nets) is derived.

The paper is a partial synthesis of the work that a team within the Faculty of Managerial and Technological Engineering has in the field of modeling and simulation of systems with Petri nets. The paper deals with three issues. The first part is Modeling and simulation of manufacturing systems with timed Petri nets. The first part presents the way in which the performances of some manufacturing systems are evaluated using timed Petri nets. The first example is a manufacturing system specific to the textile industry. The system has three production lines. In this case, the modeling with timed Petri nets allows the analysis of the operation of the flow lines and highlights the bottleneck. Another modeled manufacturing system is specific to a series production, more precisely it refers to the manufacture of gas cookers within a company from Oradea. The model with Petri nets also describes the supply sequences of the stocks of parts and subassemblies. The next modeled system is an automated manufacturing system for the packaging of detergents. The complexity of the Detergent Packing System and the high level of automation, require the use of efficient modeling and simulation methods to verify the validity of the solutions adopted. In this chapter is present the model of a robotic welding cell. The second part of the paper, the transition from timed Petri nets to hierarchical colored Petri nets, shows how Petri nets were developed for a robotic cell for metallographic analysis. The third part is dedicated to modeling with colored Petri nets timed with complex colors of the flexible manufacturing cell A007 within the Department of Industrial Engineering.

Generating a Petri net from a CSP specification: A semantics-based method

Petri nets have been proposed initially to model concurrency and distributed systems. The ordinary formalism is so simple with a smart formal background, but it fails in modeling mobility aspects. In spite of this, searchers in mobility modeling domain are attracted by Petri nets, and many extensions have been proposed to treat mobility aspects. Among these, we find Labeled Reconfigurable Nets (LRN), This new formalism allows explicit modeling of computational environments and processes mobility between them. It allows, in a simple and an intuitive approach, modeling mobile code paradigms (mobile agent, code on demand, remote evaluation). In this paper, we propose an approach based on the combined use of Meta-modeling and Graph Grammars to automatically generate a visual modeling tool for LRN, for analysis and simulation purposes. This tool produces graphical models, highly-structured to reach this goal. In our approach, the UML Class diagram formalism is used to define a meta-model of LRN. The meta-modeling tool ATOM3 is used to generate a visual modeling tool according to the proposed LRN meta-model. To generate R-Maude specification of the graphically specified LRN models, we have proposed a graph grammar. Then the reconfigurable rewriting logic language R-Maude can be used to perform the simulation of the resulted R-Maude specification. Our approach is illustrated through examples.

Model checking Petri nets with MSVL

We propose rewriting logic as a unifying framework for a wide range of nets models. We treat in detail place/transition nets and important extensions of the basic model by individual tokens, test arcs, and time. Based on the idea that Petri nets are monoids suggested by Meseguer and Montanari we define a rewriting semantics that maps place/transition nets into rewriting logic specifications. We furthermore generalize this result to a general form of algebraic net specifications subsuming also colored nets as a special case. The soundness and completeness results we state relate the commutative process semantics of nets proposed by Best and Devillers to the model-theoretic semantics of rewriting logic in the sense of natural isomorphisms between suitable functors. In addition we show how place/transition nets with test arcs and timed nets can be equipped with a rewriting semantics and discuss how other extensions can be treated along similar lines. Beyond the conceptual unification of quite different kinds of nets within a single framework, the rewriting semantics can provide a guide for future extensions of nets and help to cope with the growing diversity of models in this field. On the practical side, a major application of the rewriting semantics is its use as a logical and operational representation of net models for formal verification and for the efficient execution and analysis using a rewriting engine such as Maude, which also allows us to specify different execution and analysis strategies in the same rewriting logic language by means of reflection.