Graphitic carbon with increased interlayer spacing derived from low-temperature CO2 rapid conversion for high-performance potassium storage.

SnO2 nanosheets grow on sunflower shell carbon sphere used as anode material for high performance lithium-ion and potassium-ion batteries

Antimony nanoparticles encapsulated in interconnected nitrogen-doped carbon nanospheres for high performances PIBs

Due to the low cost, good chemical stability and structural diversity, hard carbon has been considered as an important anode material for potassium-ion batteries (PIBs). However, due to the large diameter of K+, PIBs with both excellent rate performance and long-life is still challenging. Herein, sulfur (S), phosphorus (P) co-doped hard carbon anode are synthesized via polymerization of thiophene and phytic acid and the following concise pyrolysis strategy. S in hard carbon can used as reactive sites for K+ storage and P doping will effectively improve wettability of electrolyte. After temperature regulation, the fabricated SP-700 with dual and abundant heteroatom doping exhibits high initial reversible capacity (412 mAh g−1 at 0.05 A g−1), excellent rate performance (130 mAh g−1 at 5 A g−1) and stable cyclic performance (94 mAh g−1 after 1500 cycles at 2 A g−1).

Bismuth (Bi) is regarded as a promising anode material for potassium ion batteries (PIBs) due to its high theoretical capacity, but the huge volume expansion during potassiation and intrinsic low conductivity cause poor cycle stability and rate capability. Herein, a unique Bi nanoparticles/reduced graphene oxide (rGO) composite is fabricated by anchoring the Bi nanoparticles over the rGO substrate through a ball-milling and thermal reduction process. As depicted by the in-depth XPS analysis, strong interfacial Bi-C bonding can be formed between Bi and rGO, which is beneficial for alleviating the huge volume expansion of Bi during potassiation, restraining the aggregation of Bi nanoparticles and promoting the interfacial charge transfer. Theoretical calculation reveals the positive effect of rGO to enhance the potassium adsorption capability and interfacial electron transfer as well as reduce the diffusion energy barrier in the Bi/rGO composite. Thereby, the Bi/rGO composite exhibits excellent potassium storage performances in terms of high capacity (384.8 mAh g-1 at 50mA g-1), excellent cycling stability (197.7 mAh g-1 after 1000 cycles at 500mA g-1 with no capacity decay) and superior rate capability (55.6 mAh g-1 at 2 A g-1), demonstrating its great potential as an anode material for PIBs.

Transition metal dichalcogenides are regarded as promising anode materials for potassium-ion batteries (PIBs) because of their high theoretical capacities. However, due to the large atomic radius of K+, the structural damage caused by the huge volume expansion upon potassiation is much more severe than that of their lithium counterparts. In this research, a stress-dispersed structure with Co3Se4 nanocrystallites orderly anchored on graphene sheets is achieved through a two-step hydrothermal treatment to alleviate the structural deterioration. The ability to reduce the contact stress by the well-dispersed Co3Se4 nanocrystallites during K+ intercalation, together with the highly conductive graphene matrix, provides a more reliable and efficient anode architecture than its two agminated counterparts. Given these advantages, the optimized electrode delivers excellent cycling stability (301.8 mA h g-1 after 500 cycles at 1 A g-1), as well as an outstanding rate capacity (203.8 mA h g-1 at 5 A g-1). Further in situ and ex situ characterizations and density functional theory calculations elucidate the potassium storage mechanism of Co3Se4 during the conversion reaction and reveal the fast electrochemical kinetics of the rationally designed electrode. This work provides a practical approach for constructing stable metal-selenide anodes with long cycle life and high-rate performance for PIBs.

ZIF-67-derived Co/CoSe ultrafine nanocrystal Schottky heterojunction decorated hollow carbon nanospheres as new-type anodes for potassium-ion batteries

Fe3C encapsulated in N-doped carbon as potassium ion battery anode with high capacity and long-term cycling performance

Novel K2Ti8O17 is successfully fabricated via a facile hydrothermal method combined with a subsequent annealing treatment and further evaluated as an anode material for potassium-ion batteries for the first time. This study may provide a broader vision into developing anode materials for potassium-ion batteries.

Cheese-like porous SnP2O7 composite as a long-life and high-rate anode material for potassium-ion batteries

Fabrication of 2D Cu-BDC MOF and its derived porous carbon as anode material for high-performance Li/K-ion batteries

Hollow carbon nanospheres (HCNs) have found broad applications in a large variety of application fields. Unfortunately, HCNs are known for their tedious operations and are incompetent for scalable synthesis for those widely adopted nanocasting-based routes. Here, we report a facile and highly efficient method for the creation of hollow carbon structures by tuning the growth kinetics of its polymeric precursor. We identified that a controlled polymerization of Cu2+-poly(m-phenylenediamine) (Cu-PmPD) could form nanospheres with modulated inner chemical inhomogeneity, where the core of the particles was low in polymerization degree and water soluble, whereas the outer part was water insoluble. Therefore, a simple water washing of the prepared polymeric particles directly formed hollow nanospheres with a good control on the structural features including their cavity size and shell thickness. HCNs were formed through a following heat treatment and were able to exhibit promising potential as a stable anode material when tested in potassium-ion batteries.

Multidimensional antimony nanomaterials tailored by electrochemical engineering for advanced sodium-ion and potassium-ion batteries

Bismuth (Bi) is a promising anode material for potassium-ion batteries due to its high energy density. However, the large volume change limits its applications. Herein, N-doped carbon coated Bi nanorods with a hollow structure are fabricated and they exhibit excellent long-term cycling performance (88% capacity retention over 1000 cycles) and high-rate ability (297 mA h g-1 at 20C, 94% capacity of that at 1C). Furthermore, the mechanism was expounded by in situ XRD, indicating a multi-phase reaction for the initial discharge process and three two-phase reactions for the subsequent charge/discharge processes.

Construction of Bi/Bi2O3 particles embedded in carbon sheets for boosting the storage capacity of potassium-ion batteries

Owing to the low potential (vs K/K+), good cycling stability, and sustainability, carbon-based materials stand out as one of the optimal anode materials for potassium-ion batteries (PIBs). However, achieving high-rate performance and excellent capacity with the current carbon-based materials is challenging because of the sluggish reaction kinetics and the low capacity of carbon-based anodes. The doping of nitrogen proves to be an effective way to improve the rate performance and capacity of carbon-based materials as PIB anode. However, a review article is lacking in systematically summarizing the features and functions of nitrogen doping types. In this sense, it is necessary to provide a fundamental understanding of doped nitrogen types in nitrogen-doped(N-doped) carbon materials. The types, functions, and applications of nitrogen-doped carbon-based materials are overviewed in this review. Then, the recent advances in the synthesis, properties, and applications of N-doped carbon as both active and modification materials for PIBs anode are summarized. Finally, doped nitrogen's main features and functions are concluded, and critical perspectives for future research in this field are outlined.