High dynamic range scanning tunneling microscopy

In this paper we present a new technique for the display of High Dynamic Range (HDR) images on Low Dynamic Range (LDR) displays. The described process has three stages. First, the input image is segmented into luminance zones. Second, the tone mapping operator (TMO) that performs better in each zone is automatically selected. Finally, the resulting tone mapping (TM) outputs for each zone are merged, generating the final LDR output image. To establish the TMO that performs better in each luminance zone we conducted a preliminary psychophysical experiment using a set of HDR images and six different TMOs. We validated our composite technique on several (new) HDR images and conducted a further psychophysical experiment, using an HDR display as reference, that establishes the advantages of our hybrid three-stage approach over a traditional individual TMO.

Medical endoscopic video processing requires real-time execution of color component acquisition, color filter array (CFA) demosaicing, and high dynamic range (HDR) compression under low-light conditions, while adhering to strict thermal constraints within the surgical handpiece. Traditional hardware-aware neural architecture search (NAS) relies on fixed hardware design spaces, making it difficult to balance accuracy, power consumption, and real-time performance. A collaborative “power-accuracy” optimization method is proposed for hardware-aware NAS. Firstly, we proposed a novel hardware modeling framework by abstracting FPGA heterogeneous resources into unified cell units and establishing a power–temperature closed-loop model to ensure that the handpiece surface temperature does not exceed clinical thresholds. In this framework, we constrained the interstage latency balance in pipelines to avoid routing congestion and frequency degradation caused by deep pipelines. Then, we optimized the NAS strategy by using pipeline blocks and combined with a hardware efficiency reward function. Finally, color component acquisition, CFA demosaicing, dynamic range compression, dynamic precision quantization, and streaming architecture are integrated into our framework. Experiments demonstrate that the proposed method achieves 2.8 W power consumption at 47 °C on a Xilinx ZCU102 platform, with a 54% improvement in throughput (vs. hardware-aware NAS), providing an engineer-ready lightweight network for medical edge devices such as endoscopes.

In this paper, we propose a tone mapping (TM) method using color correction function (CCF) and image decomposition in high dynamic range (HDR) imaging. The CCF in the proposed TM is derived from the luminance compression function with the color constraint under which the color ratios, between the three color channels of the radiance map and dynamic range compression term, are preserved and color saturation is controlled. The proposed CCF is developed to locally perform the luminance compression and color saturation control in local TM. For image decomposition, we use a bilateral filter and apply the adaptive weight to the base layer of the luminance. Computer simulations with various sets of real, low dynamic range images show the effectiveness of the proposed TM algorithm in terms of the visual quality as well the local contrast. It can be used for contrast and color enhancement in various display and acquisition devices.

Typical digital cameras exhibit a limitation regarding the dynamic range of the scene radiance they can capture. High Dynamic Range (HDR) imaging refers to methods and systems that aim to generate images that exhibit higher dynamic range between the lightest and the darkest parts of the an image. A typical approach for generating HDR images is exposure bracketing where multiple frames, each one with a different exposure setting, are captured and combined to a HDR image of the scene. The large number of images that exposure bracketing requires often leads to motion artefacts that limit the visual quality of the resulting HDR image. In this work, we propose a novel approach in HDR imaging that significantly reduces the necessary number of images. In our proposed system, we employ the notion of random exposure where each pixel of a single frame collects light for a random amount of time. By collecting a small number of such images, the full sequence of low dynamic range images can be reconstructed and subsequently used for HDR generation. The problem is solved by casting the reconstruction of the sequence as a nuclear norm minimization problem following the premises of the recently proposed theory of Matrix Completion. Experimental results suggest that the proposed method is able to reconstruct the sequence from as low as 20% of the images that traditional techniques require with minimal reduction in image quality.

Feature Point (FP) detection is a fundamental step in computer vision tasks. Although FP detectors are mostly designed to support Low Dynamic Range (LDR) images as input, interest in High Dynamic Range (HDR) images has increased recently due to their higher precision to register overexposed and underexposed areas in an image. As the detection of FPs is strongly dependent on the illumination of the scene, HDR images have the potential to be more robust than LDR images during FP detection. Known FP detectors, however, do not use the full potential of HDR images. In addition, few works have evaluated the performance of HDR images in this context. In this paper, we propose a modification of FP detectors aiming to improve FP detection on HDR images. To this end, we design a local mask based on the Coefficient of Variation (CV) of sets of pixels, creating thus a new step in FP detection. We compare our approach with popular FP detection methods using a standard evaluation metric, Repeatability Rate (RR) of FPs, and also Uniformity as a proposed new criterion. A dataset of images from scenes affected by camera transformations and substantial illumination changes was used as input. Experimental results show that our proposed algorithms give better Uniformity and RR in most HDR images from the dataset when compared to standard FP detectors. Moreover, they indicate that HDR images present a great potential to be explored in applications that rely on FP detection.

High dynamic range (HDR) photography is an emerging technology that has the potential to dramatically enhance the visual quality and realism of digital photos. One of the key technical challenges of HDR photography is displaying HDR photos on conventional devices through tone mapping or dynamic range compression. Although many different tone mapping techniques have been developed in recent years, evaluating tone mapping operators prove to be extremely difficult. Web2.0, social media and crowd-sourcing are emerging Internet technologies which can be harnessed to harvest the brain power of the mass to solve difficult problems in science, engineering and businesses. Paired comparison is used in the scientific study of preferences and attitudes and has been shown to be capable of obtaining an interval-scale ordering of items along a psychometric dimension such as preference or importance. In this paper, we exploit these technologies for evaluating HDR tone mapping algorithms. We have developed a Web2.0 style system that enables Internet users from anywhere to evaluate tone mapped HDR photos at any time. We adopt a simple paired comparison protocol, Internet users are presented a pair of tone mapped images and are simply asked to select the one that they think is better or click a "no difference" button. These user inputs are collected in the web server and analyzed by a rank aggregation algorithm which ranks the tone mapped photos according to the votes they received. We present experimental results which demonstrate that the emerging Internet technologies can be exploited as a new paradigm for evaluating HDR tone mapping algorithms. The advantages of this approach include the potential of collecting large user inputs under a variety of viewing environments rather than limited user participation under controlled laboratory environments thus enabling more robust and reliable quality assessment. We also present data analysis to correlate user generated qualitative indices with quantitative image statistics which may provide useful guidance for developing better tone mapping operators.

Tone-mapping-operators (TMOs) provide a useful means for converting high dynamic range (HDR) images to low dynamic range (LDR) images so that they can be viewed on standard displays, but this may influence the visual quality of experience (QoE) of the end-user. There is a need to understand the impact of TMOs to inform the choice of TMO algorithms for different displays, especially for small-screen-devices (SSDs) such as those used in mobile phones. This is important, as mobile devices are becoming the primary means of consuming multimedia contents. However, few studies have been undertaken to assess the impact of TMOs and viewing devices (especially SSDs) on the visual QoE of the user when using. In this chapter, we evaluate subjectively and objectively, the commonly used TMOs in different displays and resolutions for colour and grey-scale HDR images. Our results show that viewing devices have an influence on the TMOs performance, suggesting the need for a careful choice of TMO to enhance the viewing-QoE of the end-user. As expected, the higher resolution, the better HDR-image quality. Surprisingly, there was no significant difference between the Mean of Opinion Score (MOS) scores for colour and grey-scale images in SSDs. The device and TMOs affect QoE for colour and grey HDR-image equally. We found Shannon entropy (SE) to be a good objective measure of quality for colour and grey HDR images, suggesting that entropy may find use in automated HDR quality control assessment schemes, while; HDR-VDP-2 is a good objective measure for colour HDR image only.

High dynamic range (HDR) images are becoming pervasive due to capturing or rendering of a wider range of luminance, but their special display equipment is difficult to be popularized because of high cost and technological problem. Thus, HDR images must be adapted to the conventional display devices by applying tone mapping (TM) operation, which puts forward higher requirements for intellectual property protection of HDR images. As the robustness presents regional diversity in the low dynamic range (LDR) watermarked image after TM, which is different from the traditional watermarking technologies, a concept of watermarking activity is defined and used to distinguish the essential distinction of watermarking between LDR image and HDR image in this paper. Then, a novel robust HDR image watermarking algorithm is proposed against TM operations. Firstly, based on the hybrid processing of redundant discrete wavelet transform and singular value decomposition, the watermark is embedded by modifying the structure information of the HDR image. Distinguished from LDR image watermarking, the high embedding strength can cause more obvious distortion in the high brightness regions of HDR image than the low brightness regions. Thus, a perceptual brightness mask with low complexity is designed to improve the imperceptibility further. Experimental results show that the proposed algorithm is robust to the existing TM operations, with taking into account the imperceptibility and embedded capacity, which is superior to the current state-of-art HDR image watermarking algorithms.

Recently, visual representations using high dynamic range (HDR) images become increasingly popular, with advancement of technologies for increasing the dynamic range of image. HDR image is expected to be used in wide-ranging applications such as digital cinema, digital photography and next generation broadcast, because of its high quality and its powerful expression ability. HDR imaging technologies will spread its sphere of influence in imaging industry. In this paper, we review the state-of-the-art studies and the trends of the HDR imaging, in terms of the following three points: (1) HDR imaging sensor and HDR image generation techniques as image acquisition technologies, (2) encode method of HDR images for efficient transmission and storage, (3) human visual system issues associated with reproduction of HDR image.

The most reliable way to assess the quality of images after a dynamic range compression (i.e. tone-mapping) is a subjective study. The goal of this paper is to determine, whether the preference of the participating subjects is significantly affected by the presence of the original high dynamic range (HDR) image displayed on the HDR screen or if we can obtain equivalent results from the test without the reference. For that, an extensive experiment using two different setups has been performed. The statistical analysis showed significant difference between evaluations and a Monte Carlo simulation proved that the absence of the reference is the factor of influence.

In this paper, we present a Double-Anchoring Based Tone Mapping (DABTM) algorithm for displaying high dynamic range (HDR) images. First, two anchoring values are obtained using the double-anchoring theory. Second, we use the two values to formulate the compressing operator, which can achieve the aim of tone mapping directly. A new method based on accelerated K-means for the decomposition of HDR images into groups (frameworks) is proposed. Most importantly, a group of piecewise-overlap linear functions is put forward to define the belongingness of pixels to their locating frameworks. Experiments show that our algorithm is capable of achieving dynamic range compression, while preserving fine details and avoiding common artifacts such as gradient reversals, halos, or loss of local contrast.

High Dynamic Range (HDR) images capture the full range of luminance present in real world scenes, and unlike Low Dynamic Range (LDR) images, can simultaneously contain detailed information in the deepest of shadows and the brightest of light sources. In order to render HDR image on LDR displayers, it is often necessary to create LDR depictions of HDR images at the cost of contrast information loss. To reduce the loss, this paper enables to render HDRI (High Dynamic Range Image) with multiple low-bit images periodically. From the viewpoint of a human, the pixel value is fractural. It does not adjust the tones but can reconstruct HDR images.

In this paper, we propose a bit-depth scalable lossless coding method for high dynamic range (HDR) images based on a reversible logarithmic mapping. HDR images are generally expressed as floating-point data, such as in the OpenEXR or RGBE formats. Our bit-depth scalable coding approach outputs base layer data and enhancement layer data. It can reconstruct the low dynamic range (LDR) image from the base layer data and reconstructs the HDR image by adding the enhancement layer data. Most previous two-layer methods have focused on the lossy coding of HDR images. Unfortunately, the extension of previous lossy methods to lossless coding does not significantly compress the enhancement layer data. This is because the bit depth becomes very large, especially for HDR images in floating-point data format. To tackle this problem, we apply a reversible logarithmic mapping to the input HDR data. Moreover, we introduce a format conversion to avoid any degradation in the quality of the reconstructed LDR image. The proposed method is effective for both OpenEXR and RGBE formats. Through a series of experiments, we confirm that the proposed method decreases the volume of compressed data while maintaining the visual quality of the reconstructed LDR images.

High dynamic range (HDR) images are highly desirable and widely applied in our daily life. However, most conventional digital cameras are only able to capture low dynamic range (LDR) images. To produce HDR images, a popular and effective method is to merge multiple LDR images with different exposure settings. To achieve high quality HDR images, determining the exposure settings when capturing the multiple LDR images is of great importance. Though many researchers have paid attention to the exposure determination issue for HDR imaging, most of them have focused on DSLR cameras and surveillance video cameras. Meanwhile, mobile devices nowadays have increasing use but few studies in literature focus on them. Since cameras of mobile devices have some features different from DSLR cameras and surveillance video cameras, many existing exposure determination methods may not be directly applied on them. To fill this research gap, this paper proposes a dynamic exposure determination method for HDR photography on mobile devices, in particular on iOS mobile devices. In the proposed method, three LDR images are captured on iOS devices, which are then merged to generate an HDR result image that can cover more details of the target scene. Considering the time and memory limits of mobile devices, the proposed method analyzes the histogram of the target scene thumbnail to determine the three exposure settings with suitable exposure gaps. Based on our proposed method, we have developed an iOS HDR Camera App. The experimental results demonstrate that the HDR result images of this App are capable to contain more details in both bright area and dark area than those of Apple's default HDR Camera App on iPhone 5s for real-world target scenes.

This paper addresses the conversion problem of High Dynamic Range (HDR) images into Low Dynamic Range (LDR) images. The aim of this conversion is to ensure a good visual rendering of the displayed Tone Mapped (TM) HDR images in accordance with the observers' assessment. To do so, the proposed algorithm adjusts a piecewise linear function to the logarithm luminance distribution of the HDR image to adapt this transformation to the perceptual quantizer in accordance with the Human Visual System (HVS). The computation of the slope value of the piecewise linear transformation is simplified. Indeed, it is given by the ratio between the probability and the logarithm luminance distance in the sampling bin. This leads to histograms which tend to be flat, thus inducing a contrast enhancement of the tone mapped HDR images in both under-exposed and overexposed areas. Simulation results provide good results, both in terms of visual quality and TMQI metric, compared to existing competitive TM approaches.