High-efficiency realization of the super-robust Rydberg Deutsch gate

Unlike classical digital computers in which a bit can represent either 1 or 0 at any time, quantum computers use a two-level system, i.e., a qubit, to implement logical operations based on quantum mechanical laws, which can represent both values at once. Owing to the superposition property of qubits, quantum computers have natural parallel processing advantages and thus have potential to exceed the computational efficiency of classical computers for particular tasks. Quantum logic gates are the generalization of classical logic gates in computational networks. It has been proved that two-qubit quantum gates together with one-qubit quantum gates are adequate for constructing networks with any possible quantum computational property. Directional couplers are the most critical elementsfor constructing the quantum gates. In recent years, photonic quantum technologies have emerged as a promising experimental platform for quantum computing. Single photons have robust noise resistance, long coherence time, high transmission speed and great compatibility with other systems. They can be easily manipulated and encoded in any of several degrees of freedom, for example, polarization, path, spatial mode or time bin. Optical waveguide technology enables the realizing of complex optical schemes comprised of many elements with desired scalability, stability and miniaturization. Femtosecond laser direct writing of waveguide has been adopted as a powerful tool for integrated quantum photonics with characteristics of rapidness, cost-effectiveness, mask-less and single-step process. In particular, it has the ability to build arbitrary three-dimensional circuits directly inside bulk materials, which is impossible to achieve with conventional lithography. In this article we review the femtosecond laser writing and quantum characterization of directional coupler and important one-qubit and two-qubit optical quantum logic gates, such as Hadamard gate, Pauli-X gate, controlled-NOT gate, and controlled-Phase gate. The qubits in these gates are usually encoded through optical paths or polarizations of photons. The key to the realization of polarization-encoded one-qubit gates is to achieve flexible wave-plate operations, which is described in detail. Controlled-NOT gate and controlled-phase gate are the most crucial two-qubit gates in the linear optics computation and sometimes they can be converted into each other by adding some one-qubit gates or special superposition states. Many different kinds of waveguide circuits have been used to implement these two-qubit gates. The outlook and challenges for the femtosecond laser writing of three-qubit gates, such as Toffoli gate and Fredkin gate, are briefly introduced.

The development of noisy intermediate-scale quantum (NISQ) devices has extended the scope of executable quantum circuits with high-fidelity single- and two-qubit gates. Equipping NISQ devices with three-qubit gates will enable the realization of more complex quantum algorithms and efficient quantum error correction protocols with reduced circuit depth. Several three-qubit gates have been implemented for superconducting qubits, but their use in gate synthesis has been limited due to their low fidelity. Here, using fixed-frequency superconducting qubits, we demonstrate a high-fidelity iToffoli gate based on two-qubit interactions, the so-called cross-resonance effect. As with the Toffoli gate, this three-qubit gate can be used to perform universal quantum computation. The iToffoli gate is implemented by simultaneously applying microwave pulses to a linear chain of three qubits, revealing a process fidelity as high as 98.26(2)%. Moreover, we numerically show that our gate scheme can produce additional three-qubit gates which provide more efficient gate synthesis than the Toffoli and iToffoli gates. Our work not only brings a high-fidelity iToffoli gate to current superconducting quantum processors but also opens a pathway for developing multi-qubit gates based on two-qubit interactions.

Biomolecular residue pairs have been utilized in constructing quantum logic gates (QLGs), significantly reducing the hardware size to the subnanoscale level. However, the development of molecular fault-tolerant topological quantum computers (TQCs) presents challenges in error reduction and hardware size minimization. This study presents the manipulation of molecular QLGs (MQLGs) by utilizing protein residue pairs as molecular transistors, enabling the construction of molecular topological QLGs. This innovative approach leverages molecular functionality in quantum computer (QC) designs to build sub-nanometer transistors that significantly reduce size, enhance efficiency, and accelerate computing. The transmission spectra of electron transfer in molecular junction systems were analyzed using the non-equilibrium Green’s function method. The molecular field effect led to the observation of four quantum states on a two-dimensional potential energy surface with two degrees of freedom—proton translation and molecular rotation. These states form a quaternary QLG, similar to a 2-qubit controlled-NOT logic gate. By applying the Kitaev honeycomb lattice model, MQLGs were employed to generate nonabelian anyons that adhere to fusion rules, such as Ising and Fibonacci anyons. Furthermore, quantum circuits incorporating nonabelian anyons and their fusion processes were developed for practical applications. These findings underscore the shift away from conventional atom-based silicon technology and highlight the potential for innovative applications of molecular universal QLGs, particularly in the advancement of sub-nanometer molecular fault-tolerance TQCs.

This paper shows that quantum computation can be made fault-tolerant against errors and inaccuracies when $\eta$, the probability for an error in a qubit or a gate, is smaller than a constant threshold $\eta_c$. This result improves on Shor's result [Proceedings of the 37th Symposium on the Foundations of Computer Science, IEEE, Los Alamitos, CA, 1996, pp. 56–65], which shows how to perform fault-tolerant quantum computation when the error rate $\eta$ decays polylogarithmically with the size of the computation, an assumption which is physically unreasonable. The cost of making the quantum circuit fault-tolerant in our construction is polylogarithmic in time and space. Our result holds for a very general local noise model, which includes probabilistic errors, decoherence, amplitude damping, depolarization, and systematic inaccuracies in the gates. Moreover, we allow exponentially decaying correlations between the errors both in space and in time. Fault-tolerant computation can be performed with any universal set of gates. The result also holds for quantum particles with $p>2$ states, namely, p-qudits, and is also generalized to one-dimensional quantum computers with only nearest-neighbor interactions. No measurements, or classical operations, are required during the quantum computation. We estimate the threshold of our construction to be $\eta_c\simeq 10^{-6}$, in the best case. By this we show that local noise is in principle not an obstacle for scalable quantum computation. The main ingredient of our proof is the computation on states encoded by a quantum error correcting code (QECC). To this end we introduce a special class of Calderbank–Shor–Steane (CSS) codes, called polynomial codes (the quantum analogue of Reed–Solomon codes). Their nice algebraic structure allows all of the encoded gates to be transversal. We also provide another version of the proof which uses more general CSS codes, but its encoded gates are slightly less elegant. To achieve fault tolerance, we encode the quantum circuit by another circuit by using one of these QECCs. This step is repeated polyloglog many times, each step slightly improving the effective error rate, to achieve the desired reliability. The resulting circuit exhibits a hierarchical structure, and for the analysis of its robustness we borrow terminology from Khalfin and Tsirelson [Found. Phys., 22 (1992), pp. 879–948] and Gács [Advances in Computing Research: A Research Annual: Randomness and Computation, JAI Press, Greenwich, CT, 1989]. The paper is to a large extent self-contained. In particular, we provide simpler proofs for many of the known results we use, such as the fact that it suffices to correct for bit-flips and phase-flips, the correctness of CSS codes, and the fact that two-qubit gates are universal, together with their extensions to higher-dimensional particles. We also provide full proofs of the universality of the sets of gates we use (the proof of universality was missing in Shor's paper). This paper thus provides a self-contained and complete proof of universal fault-tolerant quantum computation in the presence of local noise.

In NMR quantum computing, spin states of spin-1/2 nuclei are called qubits. Quantum logic gates are represented by unitary matrices. As a universal gate, controlled-NOT (CNOT) is a two-qubit gate. For the IS (I = 1/2 and S = 1/2) spin system, two-qubit CNOT gate is represented by a 4 × 4 matrix. SWAP logic gate, which exchanges two quantum states, is constructed by CNOT gates. In this study, first, four-qubit CNOT gates are constructed for the IS (I = 3/2, S = 3/2) spin system. Then, by using these CNOT gates, a four-qubit SWAP logic gate is found. As an application and verification, an obtained SWAP logic gate is applied to the matrix representation of product operators for the IS (I = 3/2, S = 3/2) spin system. SWAP logic gate can also be presented by an NMR pulse sequence. By using the product operator theory, the pulse sequence of the SWAP logic gate is applied to product operators of the IS (I = 3/2, S = 3/2) spin system. The expected exchange results are obtained for both the matrix representation and the pulse sequence of SWAP logic gate.

Entanglement and decoherence are two intimately related phenomena that lie at the heart of quantum information. The EPR-Bell states are the most basic quantum systems, which form the complete entangled basis of the two-particle Hilbert space, and which are important in many quantum computation schemes. The bit flip, phase flip, and bit-phase flip noise channels represent all the possible errors in quantum computation. Thus, the quantum decoherence characteristic of maximally and partially Bell entangled states under different noisy channels is studied using the concurrence. Our work is useful for linear-optical quantum computation and quantum communication schemes whose building blocks are entangled state.

Synthesis of multi-qudit hybrid and d-valued quantum logic circuits by decomposition

In order to fulfill quantum information processing tasks such as quantum computation and scalable quantum networks, quantum logic gates are indispensable parts. A multiqubit logic gate can efficiently reduce the cost of physical resources and complicated operations that are necessary in the combination of fewer‐qubit (e.g., two‐qubit) logic gates to fulfill the same tasks. However, the construction of multiphoton quantum logic gates is a large challenge. Assisted by spatial and temporal degrees of freedom, a polarization multiphoton controlled one‐photon unitary gate is proposed, which can be realized with three processes including the control‐path process based on weak cross‐Kerr nonlinearities, the unitary transformation process, and the output process. In the control‐path process, the control‐path modules are applied, where the entanglement between polarization, spatial and temporal degrees of freedom is generated by beam splitters, time delayers, and nonlinear interaction in cross‐Kerr media. The scheme presented here, assisted by spatial and temporal degrees of freedom reduces the experimental complexity of the schemes assisted by only spatial degree of freedom. Moreover, it will also be a useful reference in optimally constructing multiqubit quantum logic gates with other multiple degrees of freedom in many physical systems.

<sec>Spin qubits in silicon-based semiconductor quantum dots have become one of the prominent candidates for realizing fault-tolerant quantum computing due to their long coherence time, good controllability, and compatibility with modern advanced integrated circuit manufacturing processes. In recent years, due to the remarkable advances in silicon-based materials, the structure of quantum dot and its fabrication process, and qubit manipulation technology, the great progress of high-fidelity state preparation and readout, single- and two-qubit gates of spin qubits for silicon based semiconductor quantum computation has been achieved. The control fidelities for single- and two-qubit gates all exceed 99%—fault tolerance threshold required by the surface code known for its exceptionally high tolerance to errors. In this paper, we briefly introduce the basic concepts of silicon-based semiconductor quantum dots, discuss the state-of-art technologies used to improve the fidelities of single- and two-qubit gates, and finally highlight the research directions that should be focused on.</sec><sec>This paper is organized as follows. Firstly, we introduce three major types of quantum dot (QD) devices fabricated on different silicon-based substrates, including Si/SiGe heterojunction and Si/SiO<sub>2</sub>. The spin degree of electron or nucleus hosted in QD can be encoded into spin qubits. Electron spin qubits can be thermally initialized to ground state by using an electron reservoirs, and can be read out by spin-charge conversion mechanism: energy-selective readout (Elzerman readout) with reservoirs or Pauli spin blockade (PSB) without reservoirs. Additionally, high fidelity single-shot readout has been demonstrated by using radio-frequency gate reflectometry combined with the PSB, which has unique advantages in large-scale qubit array. To coherently control the spin qubits, electron dipole resonance (ESR) or electron dipole spin resonance (EDSR) for electron and nuclear magnetic resonance (NMR) for nucleus are introduced. With the help of isotope purification greatly improving the dephasing time of qubit and fast single-qubit manipulation based on EDSR, fidelity above 99.9% can be reached. For the two-qubit gates based on exchange interaction between electron spins, the strength of interaction <inline-formula><tex-math id="M1">\begin{document}$ J $\end{document}</tex-math><alternatives><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="23-20221900_M1.jpg"/><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="23-20221900_M1.png"/></alternatives></inline-formula> combined with Zeeman energy difference <inline-formula><tex-math id="M2">\begin{document}$ \Delta {E}_{z} $\end{document}</tex-math><alternatives><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="23-20221900_M2.jpg"/><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="23-20221900_M2.png"/></alternatives></inline-formula> determines the energy levels of system, which lead to the different two-qubit gates, such as controlled-Z (CZ), controlled-Rotation (CROT), and the square root of the SWAP gate (<inline-formula><tex-math id="M3">\begin{document}$ \sqrt{\rm{S}\rm{W}\rm{A}\rm{P}} $\end{document}</tex-math><alternatives><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="23-20221900_M3.jpg"/><graphic xmlns:xlink="http://www.w3.org/1999/xlink" xlink:href="23-20221900_M3.png"/></alternatives></inline-formula>) gates. In order to improve the fidelity of two-qubit gates, a series of key technologies is used experimentally, they being isotope purification, symmetry operation, careful Hamiltonian engineering, and gate set tomography. Fidelity of two-qubit gates exceeding 99% has been demonstrated for electron spin qubits in Si/SiGe quantum dots and nuclear spin qubits in donors. These advances have pushed the silicon-based spin qubit platform to become a major stepping stone towards fault-tolerant quantum computation. Finally, we discuss the future study of spin qubits, that is, how to effectively expand the number of qubits, and many other problems to be explored and solved.</sec>

Certain physical systems that one might consider for fault-tolerant quantum computing where qubits do not readily interact, for instance photons, are better suited for measurement-based quantum-computational protocols. Here we propose a measurement-based model for universal quantum computation that simulates the braiding and fusion of Majorana modes. To derive our model we develop a general framework that maps any scheme of fault-tolerant quantum computation with stabilizer codes into the measurement-based picture. As such, our framework gives an explicit way of producing fault-tolerant models of universal quantum computation with linear optics using protocols developed using the stabilizer formalism. Given the remarkable fault-tolerant properties that Majorana modes promise, the main example we present offers a robust and resource efficient proposal for photonic quantum computation.

Geometric phases induced in quantum evolutions have built‐in noise‐resilient characters, and thus can find applications in many robust quantum manipulation tasks. Here, a feasible and fast scheme for universal quantum computation on superconducting circuits with nonadiabatic non‐Abelian geometric phases is proposed, using resonant interaction of three‐level quantum system. In this scheme, arbitrary single‐qubit quantum gates can be implemented in a single‐loop scenario by shaping both the amplitudes and phases of the two driving microwave fields resonantly coupled to a transmon device. Moreover, nontrivial two‐qubit gates can also be realized with an auxiliary transmon simultaneously coupled to the two target transmons in an effective resonant way. In particular, this proposal can be compatible to various optimal control techniques, which further enhances the robustness of the quantum operations. Therefore, this proposal represents a promising way toward fault‐tolerant quantum computation on solid‐state quantum circuits.

We propose a nonadiabatic non-Abelian geometric quantum operation scheme to realize universal quantum computation with mesoscopic Rydberg atoms. A single control atom entangles a mesoscopic ensemble of target atoms through long-range interactions between Rydberg states. We demonstrate theoretically that both the single qubit and two-qubit quantum gates can achieve high fidelities around or above 99.9% in ideal situations. Besides, to address the experimental issue of Rabi frequency fluctuation (Rabi error) in Rydberg atom and ensemble, we apply the dynamical-invariant-based zero systematic-error sensitivity (ZSS) optimal control theory to the proposed scheme. Our numerical simulations show that the average fidelity could be 99.98% for single ensemble qubit gate and 99.94% for two-qubit gate even when the Rabi frequency of the gate laser acquires 10% fluctuations. We also find that the optimized scheme can also reduce errors caused by higher-order perturbation terms in deriving the Hamiltonian of the ensemble atoms. To address the experimental issue of decoherence error between the ground state and Rydberg levels in Rydberg ensemble, we introduce a dispersive coupling regime between Rydberg and ground levels, based on which the Rydberg state is adiabatically discarded. The numerical simulation demonstrate that the quantum gate is enhanced. By combining strong Rydberg atom interactions, nonadiabatic geometric quantum computation, dynamical invariant and optimal control theory together, our scheme shows a new route to construct fast and robust quantum gates with mesoscopic atomic ensembles. Our study contributes to the ongoing effort in developing quantum information processing with Rydberg atoms trapped in optical lattices or tweezer arrays.

Quantum-dot Cellular Automata (QCA) is a newly developed paradigm for digital design. It explains how computation can be performed using nano sized quantum dots. One of the trending application of QCA is the design of reversible logic circuits and gates. Reversible logic is a dissipation less digital logic. According to this logic digital circuitry with almost zero power dissipation can be designed. The most important application of reversible logic is quantum computing. Quantum Computation cannot be performed without the use of reversible circuits. A number of reversible gates have been designed and used in quantum computing. The best way to derive the maximum out of reversible computation is to design those gates and circuits using systems which are inherently reversible. This is true for the quantum mechanical systems. For this quantum level designing Quantum-dot Cellular Automata stands as the appropriate choice. It's a nano level based archetype. Performing multiple functions using single circuits has always been the aim of the digital industry researchers. In reversible logic the approach is developing towards designing multifunction gates that can perform a number of functions using a same circuit with some adjustments. This development has however not yet been explored much in QCA. In this paper the majority logic equations for the outputs of a multifunction reversible logic gate are derived and the novel Quantum-dot Cellular Automata design is proposed. Some of the functions of multifunction reversible logic gate are discussed and simulated results using QCA Designer 2.0.3 are shown in the figure.

Building a quantum computer is a daunting challenge since it requires good control but also good isolation from the environment to minimize decoherence. It is therefore important to realize quantum gates efficiently, using as few operations as possible, to reduce the amount of required control and operation time and thus improve the quantum state coherence. Here we propose a superconducting circuit for implementing a tunable system consisting of a qutrit coupled to two qubits. This system can efficiently accomplish various quantum information tasks, including generation of entanglement of the two qubits and conditional three-qubit quantum gates, such as the Toffoli and Fredkin gates. Furthermore, the system realizes a conditional geometric gate which may be used for holonomic (non-adiabatic) quantum computing. The efficiency, robustness and universality of the presented circuit makes it a promising candidate to serve as a building block for larger networks capable of performing involved quantum computational tasks.

The main obstacles to the realization of high-fidelity quantum gates are the\ncontrol errors arising from inaccurate manipulation of a quantum system and the\ndecoherence caused by the interaction between the quantum system and its\nenvironment. Nonadiabatic holonomic quantum computation allows for high-speed\nimplementation of whole-geometric quantum gates, making quantum computation\nrobust against control errors. Dynamical decoupling provides an effective\nmethod to protect quantum gates against environment-induced decoherence,\nregardless of collective decoherence or independent decoherence. In this paper,\nwe put forward a protocol of nonadiabatic holonomic quantum computation\nprotected by dynamical decoupling . Due to the combination of nonadiabatic\nholonomic quantum computation and dynamical decoupling, our protocol not only\npossesses the intrinsic robustness against control errors but also protects\nquantum gates against environment-induced decoherence.\n