High-Frequency SSVEP-BCI With Row-Column Dual-Frequency Encoding and Decoding Strategy for Reduced Training Data.

Steady state visual evoked potential (SSVEP)-based brain-computer interface (BCI) has gained a lot of attention due to its robustness and high information transfer rate (ITR). However, transitioning well-controlled laboratory-oriented BCI demonstrations to real-world applications poses severe challenges for this exciting field. For instance, conducting BCI experiments usually requires skilled technicians to abrade the area of skin underneath each electrode and apply an electrolytic gel or paste to acquire high-quality SSVEPs from hair-covered areas. Our previous proof-of-concept study has proposed an alternative approach that employed electroencephalographic signals collected from easily accessible non-hair-bearing areas including neck, behind the ears, and face to realize an SSVEP-based BCI. The study results showed that, with proper electrode placements and advanced signal-processing algorithms, the SSVEPs measured from non-hair-bearing areas in off-line SSVEP experiments could achieve comparable SNR to that obtained from the hair-bearing occipital areas. This study extended the previous work to systematically investigate the costs and benefits of non-hair SSVEPs. Furthermore, this study developed and evaluated an online BCI system based solely on non-hair EEG signals. A 12-target identification task was employed to quantitatively assess the performance of the online SSVEP-based BCI system. All subjects successfully completed the tasks using non-hair SSVEPs with 84.08 ± 15.60% averaged accuracy and 30.21 ± 10.61 bits/min averaged ITR. The empirical results of this study demonstrated the practicality of implementing an SSVEP-based BCI based on signals from non-hair-bearing areas, significantly improving the feasibility and practicality of real-world BCIs.

Steady-state visual evoked potential (SSVEP)-based brain-computer interfaces (BCIs) have potential to realize high-speed communication between the human brain and the external environment. Recently, multiple access (MA) methods in telecommunications have been introduced into the system design of BCIs and showed their potential in improving BCI performance. This study investigated the feasibility of hybrid frequency and phase coding methods in multi-target SSVEP-based BCIs. Specifically, this study compared two hybrid target-coding strategies: (1) mixed frequency and phase coding, and (2) joint frequency and phase coding. In a simulated online BCI experiment using a 40-target BCI speller, BCI performance for both coding approaches were tested with a group of six subjects. At a spelling speed of 40 characters per minute (1.5 seconds per character), both approaches obtained high information transfer rates (ITR) (mixed coding: 172.37±28.67 bits/min, joint coding: 170.94±28.32 bits/min) across subjects. There was no statistically significant difference between the two approaches (p>0.05). These results suggest that the hybrid frequency and phase coding methods are highly efficient for multi-target coding in SSVEP BCIs with a large number of classes, providing a practical solution to implement a high-speed BCI speller.

Objective. Code-modulated visual evoked potential (c-VEP) based brain–computer interfaces (BCIs) exhibit high encoding efficiency. Nevertheless, the majority of c-VEP based BCIs necessitate an initial training or calibration session, particularly when the number of targets expands, which impedes the practicality. To address this predicament, this study introduces a calibration-free c-VEP based BCI employing narrow-band random sequences. Approach. For the encoding method, a series of random sequences were generated within a specific frequency band. The c-VEP signals were subsequently elicited through the application of on-type grid flashes that were modulated by these sequences. For the calibration-free decoding algorithm, filter-bank canonical correlation analysis (FBCCA) was utilized with the reference templates generated from the original sequences. Thirty-five subjects participated into an online BCI experiment. The performances of c-VEP based BCIs utilizing narrow-band random sequences with frequency bands of 15–25 Hz (NBRS-15) and 8–16 Hz (NBRS-8) were compared with that of a steady-state visual evoked potential (SSVEP) based BCI within a frequency range of 8–15.8 Hz. Main results. The offline analysis results demonstrated a substantial correlation between the c-VEPs and the original narrow-band random sequences. After parameter optimization, the calibration-free system employing the NBRS-15 frequency band achieved an average information transfer rate (ITR) of 78.56 ± 37.03 bits/min, which exhibited no significant difference compared to the performance of the SSVEP based system when utilizing FBCCA. The proposed system achieved an average ITR of 102.1 ± 57.59 bits/min in a simulation of a 1000-target BCI system. Significance. This study introduces a novel calibration-free c-VEP based BCI system employing narrow-band random sequences and shows great potential of the proposed system in achieving a large number of targets and high ITR.

The performance of steady-state visual evoked potential (SSVEP)-based brain-computer interfaces (BCIs) has been drastically improved in the past few years. In conventional SSVEP-based BCIs, the speed of a selection is fixed towards high performance based on preliminary offline analysis. However, due to inter-trial variability, the optimal selection time to achieve sufficient accuracy is different for each trial. To optimize the performance of SSVEP-based BCIs, this study proposed a dynamic stopping method that can adaptively determine a selection time in each trial by applying a threshold to the probability of detecting a target. A 12-class SSVEP dataset recorded from 10 subjects was used to evaluate the performance of the proposed method. Compared to the conventional method with a fixed selection time towards the highest accuracy, the proposed method could significantly reduce the averaged selection time (0.84±0.39 s vs. 1.44±0.63 s, p<;0.05) with comparable accuracy (99.44±1.57 % vs. 99.55±1.22 %). As a result, the simulated online information transfer rate (ITR) with the dynamic stopping method achieved a significant improvement compared to the conventional method (125.30±21.55 bits/min vs. 92.75±23.77 bits/min). These results suggest that the proposed dynamic stopping method is effective for improving the performance of SSVEP-based BCI systems.

This paper presents an electroencephalogram (EEG) based brain computer interface (BCI) design as a control mechanism for the Open Vibe Space shooter game. BCI using Steady State Visual Evoked Potential (SSVEP) is designed. The SSVEP is generated in response to a flickering visual stimulus. The setup uses different flickering frequencies which are displayed on a Liquid Crystal Display (LCD) monitor to elicit SSVEP responses. The EEG signals are recorded over the visual cortex of the brain. These signals are pre-processed to remove undesired information. To extract features, the power information contained in the corresponding frequency bands are calculated. The feature set is fed as an input to the classifier to identify the target class. This study tried to compare the performance of different classification algorithms in terms of accuracy, information transfer rate and the response time. Based on the outcome, support vector machine classifier with radial basis function recorded the best average accuracy of 90%.

Steady-state visual evoked potential (SSVEP) based brain-computer interfaces (BCIs) have achieved an information transfer rate (ITR) of over 300 bits/min, but abundant training data is required. The performance of SSVEP algorithms deteriorates greatly under limited data, and the existing time-shift data augmentation method fails to improve it because the phase-locked requirement between training samples is violated. To address this issue, this study proposes a novel augmentation method, namely phase-locked time-shift (PLTS), for SSVEP-BCI. The similarity between epochs at different time moments was evaluated, and a unique time-shift step was calculated for each class to augment additional data epochs in each trial. The results showed that the PLTS significantly improved the classification performance of SSVEP algorithms on the BETA SSVEP datasets. Moreover, under the condition of one calibration block, by slightly prolonging the calibration duration (from 48 s to 51.5 s), the ITR increased from 40.88 ±4.54 bits/min to 122.61 ± 7.05 bits/min with the PLTS. This study provides a new perspective on augmenting data epochs for training-based SSVEP-BCI, promotes the classification accuracy and ITR under limited training data, and thus facilitates the real-life applications of SSVEP-based brain spellers.

A crucial problem for the overall performance of steady-state visual evoked potentials (SSVEP)-based brain computer interface (BCIs) is the right choice of the time-window length since a large window results in a higher accuracy but longer detection time, making the system impractical. This paper proposes an adaptive time window length to improve the system performance based on the subject’s online performance. However, since there is no known methods of assessing the online performance in real time, it is also proposed a feedback from the user, through a speller, for the system to know whether the output is correct or not and change or maintain the time-window length accordantly. The system was implemented fully online and tested in 4 subjects. The subjects have attained an average information transfer rate (ITR) of 62.09bit/min and standard deviation of 2.13bit/min with a mean accuracy of 99.00% and standard deviation of 1.15%, which represents an improvement of about 6.50% of the ITR to the fixed time-window length system.Keywordsbrain-computer interface (BCI)steady-state visual evoked potentials (SSVEP)adaptive time-window lengthonline performance assessment

This study proposes a steady-state visual evoked potential (SSVEP)-based brain-computer interface (BCI) independent of amplitude-frequency and phase calibrations. Six stepping delay flickering sequences (SDFSs) at 32-Hz flickering frequency were used to implement a six-command BCI system. EEG signals recorded from Oz position were first filtered within 29-35 Hz, segmented based on trigger events of SDFSs to obtain SDFS epochs, and then stored separately in epoch registers. An epoch-average process suppressed the inter-SDFS interference. For each detection point, the latest six SDFS epochs in each epoch register were averaged and the normalized power of averaged responses was calculated. The visual target that induced the maximum normalized power was identified as the visual target. Eight subjects were recruited in this study. All subjects were requested to produce the "563241" command sequence four times. The averaged accuracy, command transfer interval, and information transfer rate (mean ± std.) values for all eight subjects were 97.38 ± 5.97%, 3.56 ± 0.68 s, and 42.46 ± 11.17 bits/min, respectively. The proposed system requires no calibration in either the amplitude-frequency characteristic or the reference phase of SSVEP which may provide an efficient and reliable channel for the neuromuscular disabled to communicate with external environments.

Cognitive assessment is of growing importance, with the general population getting older and a rapidly growing incidence of dementia, which is a major public health issue. Treatment of dementia must, to be most effective, start early in the disease process. Thus, early detection of cognitive decline is important. Cognitive decline may be detected using fully-automated computerized assessment. Such systems will provide inexpensive and widely available screenings of cognitive ability. The aim of this pilot study is to develop a real time steady state visual evoked potential (SSVEP) based brain-computer interface (BCI) for neurological cognitive assessment. It is intended for use by patients who suffer from diseases impairing their motor skills, but are still able to control their gaze. Results are based on 11 healthy test subjects. The system performance have an average accuracy of 100% - 0%. The test subjects achieved an information transfer rate (ITR) of 14.64 bits/min - 7.63 bits/min and a subject test performance of 47.22% - 34.10%. This study suggests that BCI may be applicable in practice as a computerized cognitive assessment tool. However, many improvements are required for the system to be fully valid and of clinical use.

Steady-state visual evoked potential (SSVEP)-based brain–computer interfaces (BCIs) offer a high information transfer rate (ITR), but are often constrained by the computational burden and limited performance of existing decoding models. To address these challenges, we propose LARSNet, a lightweight asymmetric residual Siamese network tailored for efficient and accurate multiclass SSVEP classification. LARSNet employs an asymmetric architecture comprising a residual-enhanced signal branch for robust feature extraction from low signal-to-noise ratio (SNR) data and a reference branch for high-fidelity template construction. A correlation analysis layer with a parameter-efficient approximate weight mechanism further refines the discriminative capability by modeling joint stimulus interference. Comprehensive evaluations on 40-class and 12-class datasets demonstrated that LARSNet significantly outperformed traditional and deep learning methods, particularly for short data segments, while reducing model complexity to 491 parameters and 1.00 mega floating-point operations (MFLOPs). In particular, with 0.4-s data, the 40-class dataset achieved an ITR of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$254.15~\pm ~69.51$ </tex-math></inline-formula> bits/min, while the 12-class dataset reached <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$125.78~\pm ~34.26$ </tex-math></inline-formula> bits/min. Feature visualization further revealed a progressive SNR enhancement of SSVEP characteristic frequencies across layers. Collectively, these results highlight the potential of LARSNet for SSVEP-BCI applications, offering a robust balance of high performance and low complexity.

Electroencephalogram (EEG) based brain-computer interfaces (BCIs) for wheelchair control have great value for those with devastating neuromuscular disorders. Although there have been many attempts to implement EEG-based wheelchair control systems by P300, steady state visual evoked potential (SSVEP), and motor imagery (MI) related event-related desynchronization/synchronization (ERD/ERS), the number of simultaneous control commands in those BCI systems is strictly limited, and those BCI control do not work for a non-negligible portion of users due to the problem of BCI Illiteracy.In this paper, we develop a multimodal BCI based wheelchair control system, the user could employ subject-optimized mental strategies to produce multiple commands to control the wheelchair, which include ERD/ERS, SSVEP, and simultaneous ERD/ERS and SSVEP. It could not only help address ”BCI illiteracy”, but also provide simultaneous control commands for complex control. Experiment results demonstrate the proposed system is effective and flexible in practical application.KeywordsBCIwheelchair controlmultimodalBCI Illiteracy

This paper presents the major challenges and solutions for the Brain Computer Interfaces (BCIs), which are based on Steady State Visual Evoked Potentials (SSVEPs). A BCI utilizes the information transmitted by the brain; there are several methods available for analyzing these brain activities. One of the major challenges in BCI is to remove the noise successfully. Averaging along with Wavelets has been proposed in this paper for de-noising the brain activities. Moreover, three different approaches have been investigated to estimate the frequency spectrum of the brain signals. In addition to the well known Fourier Transform (FT) technique, for spectral estimation, there are many parametric and non parametric techniques for computing the frequency content of a signal. This paper presents a comparison between Fast Fourier Transform (FFT), MUltiple SIgnal Classification (MUSIC) and Linear Predictive Coding (LPC). The effectiveness of different techniques has been studied and the simulation results have shown that MUSIC outperforms the other approaches.

A classification algorithm of an SSVEP brain-Computer interface based on CCA fusion wavelet coefficients

Steady-state visual evoked potential (SSVEP)-based brain– computer interfaces (BCIs) have been widely studied. Considerable progress has been made in the aspects of stimulus coding, electroencephalogram processing, and recognition algorithms to enhance system performance. The properties of SSVEP have been demonstrated to be highly sensitive to stimulus luminance. However, thus far, there have been very few reports on the impact of background luminance on the system performance of SSVEP-based BCIs. This study investigated the impact of stimulus background luminance on SSVEPs. Specifically, this study compared two types of background luminance, i.e., (1) black luminance [red, green, blue (rgb): (0, 0, 0)] and (2) gray luminance [rgb: (128, 128, 128)], and determined their effect on the classification performance of SSVEPs at the stimulus frequencies of 9, 11, 13, and 15 Hz. The offline results from nine healthy subjects showed that compared with the gray background luminance, the black background luminance induced larger SSVEP amplitude and larger signal-to-noise ratio, resulting in a better classification accuracy. These results suggest that the background luminance of visual stimulus has a considerable effect on the SSVEP and therefore has a potential to improve the BCI performance.

Objective. Steady-state visual evoked potential (SSVEP)-based brain-computer interfaces (BCIs) can provide relatively easy, reliable and high speed communication. However, the performance is still not satisfactory, especially in some users who are not able to generate strong enough SSVEP signals. This work aims to strengthen a user’s SSVEP by alpha down-regulating neurofeedback training (NFT) and consequently improve the performance of the user in using SSVEP-based BCIs. Approach. An experiment with two steps was designed and conducted. The first step was to investigate the relationship between the resting alpha activity and the SSVEP-based BCI performance, in order to determine the training parameter for the NFT. Then in the second step, half of the subjects with ‘low’ performance (i.e. BCI classification accuracy <80%) were randomly assigned to a NFT group to perform a real-time NFT, and the rest half to a non-NFT control group for comparison. Main results. The first step revealed a significant negative correlation between the BCI performance and the individual alpha band (IAB) amplitudes in the eyes-open resting condition in a total of 33 subjects. In the second step, it was found that during the IAB down-regulating NFT, on average the subjects were able to successfully decrease their IAB amplitude over training sessions. More importantly, the NFT group showed an average increase of 16.5% in the SSVEP signal SNR (signal-to-noise ratio) and an average increase of 20.3% in the BCI classification accuracy, which was significant compared to the non-NFT control group. Significance. These findings indicate that the alpha down-regulating NFT can be used to improve the SSVEP signal quality and the subjects’ performance in using SSVEP-based BCIs. It could be helpful to the SSVEP related studies and would contribute to more effective SSVEP-based BCI applications.