High-Order Self-Attention Network for Remote Sensing Scene Classification

Multimodal emotion recognition has become a hot topic in human-computer interaction and intelligent healthcare fields. However, combining information from different human different modalities for emotion computation is still challenging. In this paper, we propose a three-dimensional convolutional recurrent neural network model (referred to as 3FACRNN network) based on multimodal fusion and attention mechanism. The 3FACRNN network model consists of a visual network and an EEG network. The visual network is composed of a cascaded convolutional neural network-time convolutional network (CNN-TCN). In the EEG network, the 3D feature building module was added to integrate band information, spatial information and temporal information of the EEG signal, and the band attention and self-attention modules were added to the convolutional recurrent neural network (CRNN). The former explores the effect of different frequency bands on network recognition performance, while the latter is to obtain the intrinsic similarity of different EEG samples. To investigate the effect of different frequency bands on the experiment, we obtained the average attention mask for all subjects in different frequency bands. The distribution of the attention masks across the different frequency bands suggests that signals more relevant to human emotions may be active in the high frequency bands γ (31-50 Hz). Finally, we try to use the multi-task loss function Lc to force the approximation of the intermediate feature vectors of the visual and EEG modalities, with the aim of using the knowledge of the visual modalities to improve the performance of the EEG network model. The mean recognition accuracy and standard deviation of the proposed method on the two multimodal sentiment datasets DEAP and MAHNOB-HCI (arousal, valence) were 96.75 ± 1.75, 96.86 ± 1.33; 97.55 ± 1.51, 98.37 ± 1.07, better than those of the state-of-the-art multimodal recognition approaches. The experimental results show that starting from the multimodal information, the facial video frames and electroencephalogram (EEG) signals of the subjects are used as inputs to the emotion recognition network, which can enhance the stability of the emotion network and improve the recognition accuracy of the emotion network. In addition, in future work, we will try to utilize sparse matrix methods and deep convolutional networks to improve the performance of multimodal emotion networks.

Remote sensing scene classification converts remote sensing images into classification information to support high-level applications, so it is a fundamental problem in the field of remote sensing. In recent years, many convolutional neural network (CNN)-based methods have achieved impressive results in remote sensing scene classification, but they have two problems in extracting remote sensing scene features: (1) fixed-shape convolutional kernels cannot effectively extract features from remote sensing scenes with complex shapes and diverse distributions; (2) the features extracted by CNN contain a large number of redundant and invalid information. To solve these problems, this paper constructs a deformable convolutional neural network to adapt the convolutional sampling positions to the shape of objects in the remote sensing scene. Meanwhile, the spatial and channel attention mechanisms are used to focus on the effective features while suppressing the invalid ones. The experimental results indicate that the proposed method is competitive to the state-of-the-art methods on three remote sensing scene classification datasets (UCM, NWPU, and AID).

Understanding the learning mechanism of convolutional neural networks in spectral analysis

A case study on computer-aided diagnosis of nonerosive reflux disease using deep learning techniques

Among the many deep learning methods, the convolutional neural network (CNN) model has an excellent performance in image recognition. Research on identifying and classifying image datasets using CNN is ongoing. Animal species recognition and classification with CNN is expected to be helpful for various applications. However, sophisticated feature recognition is essential to classify quasi-species with similar features, such as the quasi-species of parrots that have a high color similarity. The purpose of this study is to develop a vision-based mobile application to classify endangered parrot species using an advanced CNN model based on transfer learning (some parrots have quite similar colors and shapes). We acquired the images in two ways: collecting them directly from the Seoul Grand Park Zoo and crawling them using the Google search. Subsequently, we have built advanced CNN models with transfer learning and trained them using the data. Next, we converted one of the fully trained models into a file for execution on mobile devices and created the Android package files. The accuracy was measured for each of the eight CNN models. The overall accuracy for the camera of the mobile device was 94.125%. For certain species, the accuracy of recognition was 100%, with the required time of only 455 ms. Our approach helps to recognize the species in real time using the camera of the mobile device. Applications will be helpful for the prevention of smuggling of endangered species in the customs clearance area.

Storing and processing Remote Sensing (RS) images require large amounts of memory space and computing resources. Consequently, RS images are compressed and stored in various compression formats, such as JPEG2000. However, the processing of RS images for machine interpretation and understanding still necessitates the deployment of an image decompression stage in its entirety, followed by a computationally demanding image analysis pipeline. The image analysis stage is commonly composed of machine learning techniques, such as Deep Convolutional Neural Network (DCNN) models. Classification of remote sensing images is among the most common image analysis tasks. In the scope of this paper, we propose a sub-band image based classification method for the Remote Sensing Scene Classification (RSSC) task in the JPEG2000 compressed domain. The proposed approach exploits the already available sub-band image coefficients to classify RS images without needing for full decompression. Our study shows that our method increases the high frequency information in the LL sub-band and allows the image to contain more detail, leading to improved classifier performance while taking advantage of the partial decompression method.

Accurately identifying epileptogenic zone (EZ) using high-frequency oscillations (HFOs) is a challenge that must be mastered to transfer HFOs into clinical use. We analyzed the ability of a convolutional neural network (CNN) model to distinguish EZ and non-EZ HFOs. Nineteen medically intractable epilepsy patients with good surgical outcomes 2 years after surgery were studied. Five-minute interictal intracranial electroencephalogram epochs of slow-wave sleep were selected randomly. Then 5 s segments of ripples (80–200 Hz) and fast ripples (FRs, 200–500 Hz) were detected automatically. The EZs and non-EZs were identified using the surgery resection range. We innovatively converted all epochs into four types of images using two scales: original waveforms, filtered waveforms, wavelet spectrum images, and smoothed pseudo Wigner–Ville distribution (SPWVD) spectrum images. Two scales were fixed and fitted scales. We then used a CNN model to classify the HFOs into EZ and non-EZ categories. As a result, 7,000 epochs of ripples and 2,000 epochs of FRs were randomly selected from the EZ and non-EZ data for analysis. Our CNN model can distinguish EZ and non-EZ HFOs successfully. Except for original ripple waveforms, the results from CNN models that are trained using fixed-scale images are significantly better than those from models trained using fitted-scale images (p < 0.05). Of the four fixed-scale transformations, the CNN based on the adjusted SPWVD (ASPWVD) produced the best accuracies (80.89 ± 1.43% and 77.85 ± 1.61% for ripples and FRs, respectively, p < 0.05). The CNN using ASPWVD transformation images is an effective deep learning method that can be used to classify EZ and non-EZ HFOs.

Distinguishing pericarpium citri reticulatae of different origins using terahertz time-domain spectroscopy combined with convolutional neural networks

This study presents an improved data augmentation technique for the classification of remote sensing (RS) scenes. The method is called Quality-based Sample Selection (QSS) data augmentation technique. It is based on generating a large number of samples using geometric transformations and then selecting the best ones based on a quality criterion. Sample images are generated online, i.e. during training of the convolutional neural network (CNN) model. For each training sample image, a few images are generated randomly using a set of geometric transformations. Then, the generated images are passed to the CNN model being trained, and the predicted probabilities are used to evaluate the quality of the images. The motivation behind this research is that we aim to augment the training set with new images that will benefit the learning of the CNN model. Therefore, an objective method to evaluate the quality of the new images is the CNN model itself. The image with the best criteria score is used to augment the training set. Several quality criteria based on the prediction probabilities of the CNN model are considered including entropy, breaking-ties and our own proposed criteria called True Label Probability (TLP). QSS is tested on five common RS scene classification datasets: UCMerced, Optimal31, RSSCN7, AID and NWPU-RS45. It has outperformed all previous methods except for one case involving NWPU-RS45 dataset. For the 10%–90% train–test split, QSS achieved 94.51, 81.72, 89.89, 94.09 and 93.98, respectively, for the mentioned datasets. While for the 20%–80% train–test split, it achieved 97.09, 88.37, 94.01, 95.71 and 94.71, respectively, for the listed datasets. Thus, this work presents a novel data augmentation method that uses data with higher quality instead of randomly selected. The paper proves experimentally that the proposed method improves the classification accuracy of RS scene classification.

Convolutional Neural Networks (CNNs) have demonstrated impressive performance in complex machine learning tasks such as classification and regression problems. A reliable neural network structure plays a decisive role in CNN studies. Through comparing and analyzing the structure of neural networks, a model structure for better visualization performance has been discovered, and such a method supports the development of deep learning research. These studies are of particular importance in end-to-end systems for autonomous driving to imitate human driving, where the interpretability of the system is limited. Because of the uncertainty of the ground truth, for the determination of human steering in an image, it is difficult to accurately compare the visualization performance of different CNN models or different visualization methods. For practical applications, however, an objective and quantitative measure for assessing visualization performance is necessary. Therefore, a method to evaluate the visualization performance of CNN models using a driver model instead of human drivers is proposed, to generate a data set which can be used to determine the decisional point (ground truth) in the input image. Then, an exclusive method is also put forth, to quantitatively calculate the relationship between the decisional point (ground truth) and the visualization results produced by CNN models. In this paper, five CNN models as an autonomous steering controller are designed based on PilotNet, and the visualization abilities of each CNN models is compared by three evaluation indicators. By comparing the visualization performance of five different CNN models, it is shown that the proposed method can successfully assess the visualization level of the CNN model.

Remote sensing (RS) scene classification plays an important role in the field of earth observation. With the rapid development of the RS techniques, a large number of RS scene images are available. As manually labeling large-scale RS scene images is both labor and time consuming, when a new unlabeled data set is obtained, how to use the existing labeled data sets to classify the new unlabeled images is an important research direction. Different RS scene image data sets may be taken from different type of sensors, and the images may vary from imaging modalities, spatial resolutions, and image scales, so the distribution discrepancy exists among different image data sets. As a result, simply applying convolutional neural networks (CNN) trained on source domain cannot accurately classify the images on target domain. Domain adaptation (DA) can be helpful to solve this problem. In this letter, we design a subspace alignment (SA) and CNN-based framework to solve the DA problem in RS scene image classification. A new SA layer is proposed and added into CNN models for DA, which could align the source and target domains in some feature subspace. Fine-tuning the modified CNN model with the added SA layer makes the CNN model adapt to the aligned feature subspace and helps to relieve the domain distribution discrepancy. The experiments conducted on two public data sets show that adding the SA layer into CNN improves the scene classification on the target domain.

The Part 1 prequel to this review evaluated the evolution of modelling techniques used in evaluation of fruit quality over the past three decades and noted a progression towards the use of artificial neural networks (ANNs) and convolutional neural networks (CNNs). In this review, Part 2, the use of CNNs for NIR fruit quality evaluation is explored, given the success of CNNs in various other fields, such as image, video, speech, and audio processing, and the availability of large (open source) datasets of fruit spectra and reference quality attribute, which is required for the training of CNN models. The review provides an overview of deep learning and the CNN architectures and techniques used in NIR spectroscopy for regression modelling, with advantages and disadvantages identified. Studies using CNN for NIR based fruit quality evaluation are then critically examined. Eight publications have presented on models using the same open-source mango dry matter calibration and test set, enabling inter-method comparisons. CNN models have been demonstrated to be accurate, precise and robust. Techniques of transfer learning for CNN models offer an alternative solution to model updating and calibration transfer methods applied in traditional chemometrics. The review has highlighted crucial areas that require resolution and exploration in this application through future research, including, (i) data requirements for training a CNN (ii) optimal spectral pre-processing for CNN (iii) CNN architecture and hyper-parameter selection and tuning for fruit quality evaluation (iv) CNN model interpretability and explainability. Future studies must conduct clearer comparison to partial least squares (PLS) regression and shallow ANNs to better assess the prospective benefit of using CNN, a more complex model. The potential for visualisation of spectra relevance to the CNN model using techniques such as GradCam, currently employed in visualising 2D-CNN models, remains to be explored.

Empirical-statistical Downscaling (SD) techniques are valuable tools able to generate high-resolution climate information needed to carry out impact studies. In this regard, Convolutional Neural Networks (CNNs) are promising SD techniques capable of handling large amounts of data and extracting relevant predictor information for each particular site. These characteristics of the CNN represent a major advantage over traditional SD methods, which typically rely on human-guided predictor selection. Notwithstanding, an adequate tuning of the CNN is key for optimising their potential.In southern South America (SSA), CNNs has proven to be skilful in representing daily extreme temperatures and extrapolating into future scenarios. Although the selection of the activation function introduces a source of uncertainty in the future projections.&amp;#160;In this context, this study aims to explore the use of CNNs as a statistical downscaling tool to simulate the wet bulb temperature (Tw) over SSA, a multivariate heat-stress index estimated from temperature and humidity. Tw has been widely used as a heat-stress proxy in different parts of the world, however, its characterisation and modelling in SSA remain as a pending task. To this end, four different CNN architectures regarding the activation function (ReLU or linear), domain size and configuration of the CNN layers were tested. All CNN models were trained during summer days using a cross-validation (CV) scheme in the period 1991-2020 and then evaluated in four unseen summers between 2021 and 2024. For comparison purposes, CNN models were similarly trained and validated to simulate maximum temperature (Tx).&amp;#160;Overall, CNN models well represented all the features evaluated, including the heat-waves that took place in the summers evaluated independently. In particular, CNN models presents a better performance in simulating Tw than Tx with smaller errors in terms of mean and extremes aspects. Regarding the domain size, for both temperatures, the configuration with the smaller domain yields the best results. Also in this latter case, the reduction of the number of filter size in the last layer slightly improves the representation of Tx. When considering the large domain, the differences between the CNNs based on different activation functions increase, and CNN models with linear configuration outperform the ones with ReLu.&amp;#160;The findings of this work reinforces the potential of CNNs for climate downscaling in SSA, especially for its use to simulate multivariate impact indices.

We intended to compare the doctors with a convolutional neural network (CNN) that we had trained using our own unique method for the Lateral Pillar Classification (LPC) of Legg–Calve–Perthes Disease (LCPD). Thousands of training data sets are frequently required for artificial intelligence (AI) applications in medicine. Since we did not have enough real patient radiographs to train a CNN, we devised a novel method to obtain them. We trained the CNN model with the data we created by modifying the normal hip radiographs. No real patient radiographs were ever used during the training phase. We tested the CNN model on 81 hips with LCPD. Firstly, we detected the interobserver reliability of the whole system and then the reliability of CNN alone. Second, the consensus list was used to compare the results of 11 doctors and the CNN model. Percentage agreement and interobserver analysis revealed that CNN had good reliability (ICC = 0.868). CNN has achieved a 76.54% classification performance and outperformed 9 out of 11 doctors. The CNN, which we trained with the aforementioned method, can now provide better results than doctors. In the future, as training data evolves and improves, we anticipate that AI will perform significantly better than physicians.

BACKGROUND AND AIM: Outdoor ultrafine particles (UFP; 100 nm) and black carbon (BC) vary greatly within cities and may have adverse impacts on human health such as cardiovascular mortality and brain tumour incidence. Traditional regression methods for estimating spatial distributions of ambient air pollution depend on extensive, curated geospatial information system databases. This has resulted in a disparity wherein little is known about local air pollution in the data-sparse settings of low- and middle- income countries. We used a hybrid approach to develop new models to estimate within-city spatial variations in outdoor UFP and BC concentrations across Bucaramanga, Colombia. METHODS: We conducted a large-scale mobile monitoring campaign over twenty days in 2019. Land use regression (LUR) models were developed using land use parameters from curated and open-source databases. Convolutional Neural Network (CNN) models were developed using Google Maps satellite view and street view images. Combined models were developed by combining predictions from the LUR and CNN models. After training in the training and validation sets, predictions were generated in the test set and compared to measured values. RESULTS:The combined UFP model (R2=0.54) outperformed the CNN (R2=0.47) and land use regression (LUR) models (R2=0.47) on their own. Similarly, the combined BC model also outperformed the CNN and LUR BC models (R2 = 0.51 vs 0.43 and 0.45 respectively). Spatial variations in model performance were more stable for the CNN and combined models compared to the LUR models suggesting that the combined approach may be less likely to contribute to differential exposure measurement error in epidemiological studies. CONCLUSIONS:Estimates from these models can then be applied to population-based cohorts in order to evaluate population health risks. Additionally, our findings demonstrated that satellite and street-level images can be combined with a traditional LUR modelling approach to improve predictions of within-city spatial variations in outdoor UFP and BC concentrations. KEYWORDS: Ultrafine particles, Black Carbon, Deep learning, Images, Land use regression