High-performance 64-QAM OFDM via carrier interferometry spreading codes

OFDM (orthogonal frequency division multiplexing) has gained a great deal of attention of late and is considered a strong candidate for many next generation wireless communication systems. However, OFDM (in its current implementation) does not demonstrate robustness to narrowband interference. In our earlier work, we showed how carrier interferometry (CI) spreading codes may be applied to spread OFDM symbols over all N subcarriers. This allows OFDM to exploit frequency diversity and improve performance (without loss in throughput). In this paper, we show that, by spreading OFDM symbols over all N subcarriers via CI spreading codes, the resulting CI/OFDM system is also capable of suppressing narrowband interference. Simulation results over AWGN and multi-path fading channels confirm CI/OFDM's robustness in the presence of narrowband interference.

Next generation wireless communication systems are considering orthogonal time frequency space (OTFS) waveform as an alternative to the existing orthogonal frequency division multiplexing (OFDM) waveform. It is more robust to high Doppler and high carrier frequencies. Multiple recent papers have evaluated OTFS at higher Doppler with long term evolution (LTE) system, to show its performance benefits over OFDM. In this paper, we provide the performance evaluation of OTFS waveform at mmWave frequencies using the third generation partnership project (3GPP) 5G new radio (NR) transmit-receive chain for different quadrature amplitude modulation (QAM) schemes. We compare the OTFS performance with that of OFDM, for 3GPP defined tapped delay line (TDL) and cluster delay line (CDL) channel models at multiple mobility conditions. We analyze the performance difference between OTFS and OFDM using both minimum mean-squared error (MMSE) and decision feedback equalizers (DFE) at the receiver, and show the need for DFE at higher modulation order, to compensate the inter symbol interference. We show that the OTFS has 10 dB gain in signal to noise ratio (SNR) over OFDM, for TDL-C channel with delay spread of 300 ns, at high speed train mobility of 500 kmph for 64-QAM, when evaluated with DFE. We further present the computational complexity of OTFS system, in comparison to OFDM.

Orthogonal Frequency Division Multiplexing (OFDM) has been considered as a strong candidate for next generation wireless communication systems. Compared to traditional OFDM, Single Carrier OFDM (SC-OFDM) has demonstrated excellent bit error rate (BER) performance, as well as low peak to average power ratio (PAPR). Similar to other multi-carrier transmission technologies, SC-OFDM suffers significant performance degradation resulting from intercarrier interference (ICI) in high mobility environments. Existing techniques for OFDM can be directly adopted in SC-OFDM to improve performance, however, this improved performance comes at costs such as decreased throughput. In this paper, we analyze the effect of ICI on an SC-OFDM system and propose a novel modulation scheme. The proposed Magnitude-Keyed Modulation (MKM) modulation provides SC-OFDM system immunity to ICI and with an easy implementation it significantly outperforms OFDM, SC-OFDM and MC-CDMA systems with Phase Shift Keying (PSK) modulation and Quadrature Amplitude Modulation (QAM) in severe ICI environment. Analysis also illustrates the proposed SC-OFDM system with MKM modulation maintains low PAPR compared to traditional OFDM and SC-OFDM systems with PSK and QAM modulations. Simulation results for different modulation schemes in various ICI environments confirm the effectiveness of the proposed system.

Orthogonal frequency division multiplexing (OFDM) system has been widely used for the high speed digital communication area and it is very promising for the next generation communication standard because of high data rate capability. However, OFDM system has inherent serious problem of high peak-to-average power ratio (PAPR) that makes the OFDM signal be distorted in the nonlinear HPA (high power amplifier). In this paper, CI (carrier interferometry)-OFDM system is considered to overcome this problem and is newly analyzed in the selective fading and narrow-band interference channel. CI-OFDM system distributes each parallel data to all sub-carriers in differently phase-rotated form. So, PAPR becomes lowered and it shows the frequency diversity effects. BER (bit error rate) performance is analyzed in the selective fading and narrow-band interference environment. From the simulation results, it is confirmed that CI-OFDM system calms down the high PAPR problem and CI-OFDM system is more robust than the ordinary OFDM system in the selective fading and narrow-band interference channel.

Orthogonal Frequency Division Multiplexing (OFDM) is a multicarrier modulation technique. It supports high data rates over wireless radio channels. Due to high peak-to-average power ratio, OFDM is sensitive to the non-linear effects of the power amplifier. So, many methods of PAPR reduction techniques have been proposed. Of these, the distortionless method of PAPR reduction is Partial Transmit Sequence (PTS) technique. But this method suffers from high computational complexity. Modified PTS technique has been proposed to address the issue of high computational complexity. Modified PTS technique adopts a neighbourhood search algorithm to find the optimum set of phase factors. In this paper, the performance the OFDM system by using modified PTS technique combined with interleaving and pulse shaping is evaluated by employing Least Square (LS) and Minimum Mean Square Error (MMSE) channel estimation methods. Mean Square Error (MSE) and Bit error rate (BER) are the performance measures that are employed to analyse the performance of the OFDM system. The simulation result shows that the performance of OFDM system improves with PAPR reduction.

An orthogonal frequency division multiplexing (OFDM) is one of the effective techniques used in wireless communications. In OFDM systems, channel impairments due to multipath dispersive wireless channels can cause deep fades in wireless channels. The OFDM receiver also requires an accurate and computationally efficient channel state information when coherent detection is involved. Therefore, it needs a good robust estimation method of the channel in wireless communication for OFDM systems. And one of these channel estimation methods is minimum mean square error (MMSE) channel estimation. MMSE channel estimation one most used method in OFDM systems. In this work we enhanced robustness of MMSE channel estimation by using it in base of quasi-cyclic low density parity check (QC-LDPC) coded OFDM system.

Physical layer security is a crucial issue in wireless networks to prevent legitimate communication from eavesdropping. This paper investigates the physical layer security of a wireless multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) communication system in the presence of a multiple-antenna eavesdropper. We first propose a minimum mean square error (MMSE)-based-filter secure MIMO–OFDM system which can destroy the orthogonality of eavesdropper’s signals. The MMSE-based-filter is used at the receiver to suppress the inter-subcarrier interference and disturb the reception of eavesdropper while maintaining the quality of legitimate transmission. Next, we propose another artificial noise (AN)-assisted secure MIMO–OFDM system to further improve the security of the legitimate transmission. The time-domain AN signal is designed to be canceled out at the legitimate receiver. Therefore, AN will disturb the reception of eavesdropper while the legitimate transmission will not be affected. Finally, power allocation for AN signals and subcarriers will be discussed since AN is generated utilizing the residual power of the MIMO–OFDM system. Simulation results are presented to demonstrate the security performance of the proposed transmit filter design and AN-assisted scheme in the MIMO–OFDM system.

In the new generation wireless communication systems where high data rates are desired, orthogonal frequency division multiplexing (OFDM) has become the standard method because of its advantages over single carrier modulation schemes on multi-path, frequency selective fading channels. However, inter-carrier interference due to Doppler frequency shifts, and multi-path fading severely degrades the performance of OFDM systems. Estimation of channel parameters is required at the receiver. In this paper, we present a time-varying channel modeling and estimation method based on the discrete evolutionary transform that provides a time-frequency procedure to obtain a complete characterization of a multi-path, fading and frequency selective channel. Performance of the proposed method is tested on different levels of channel noise, and Doppler frequency shifts.

In orthogonal frequency-division multiplexing (OFDM) systems, it is generally assumed that the channel response is static in an OFDM symbol period. However, the assumption does not hold in high-mobility environments. As a result, intercarrier interference (ICI) is induced and the system performance is degraded. A simple remedy for this problem is the application of the zero-forcing (ZF) and minimum mean square error (MMSE) equalizers. Unfortunately, the direct ZF method requires the inversion of an NxN ICI matrix, where N is the number of subcarriers. When N is large, the computational complexity can become prohibitively high. As for the direct MMSE method, in addition to an NxN matrix inverse, it requires an extra NxN matrix multiplication, making the required computational complexity higher compared to the direct ZF method. In this dissertation, we first propose a low-complexity ZF method to solve the problem in single-input-single-output (SISO) OFDM systems. The main idea is to explore the special structure inherent in the ICI matrix and to apply Newton's iteration for matrix inversion. With our formulation, fast Fourier transforms (FFTs) can be used in the iterative process, reducing the complexity from O(N^3) to O(Nlog_2 N) . Also, the required number of the iteration is typically one or two. We also analyze the convergence behavior of the proposed method and derive the theoretical output signal-to-interference-noise-ratio (SINR). For the MMSE method, we first reformulate the MMSE solution in a way that the extra matrix multiplication can be avoided. Similar to the ZF method, we then exploit the structure of the ICI matrix and apply Newton's iteration to reduce the complexity of the matrix inversion. For a multiple-input-multiple-output (MIMO) OFDM system, the required complexity of the ZF and MMSE methods becomes more intractable. We then manage to extend the proposed ZF and MMSE methods for SISO-OFDM systems to MIMO-OFDM systems. It turns out that the computational complexity can be reduced even more significantly. Simulation results show that the performance of the proposed methods is almost as good as that of the direct ZF and MMSE methods, while the required computational complexity is reduced dramatically. Finally, we explore the application of the proposed methods in mobility-induced ICI mitigation for OFDM multiple access (OFDMA) systems, and in carrier frequency offset (CFO) induced ICI mitigation for OFDMA uplink systems. As that in OFDM systems, the proposed methods can reduce the required computational complexity, effectively.

Multicarrier modulation technique also known as Orthogonal Frequency Division Multiplexing (OFDM) is considered to be the most rapidly growing technique for 4th Generation wireless communication system. Due to its high speed data rate and its ability of multipath fading channel robustness. OFDM becomes an attractive technique and it is widely adopted in many wireless communications system. OFDM signal carries its major drawback of high Peak to Average Power Ratio (PAPR) problem. Out of band radiation and in band distortion produced due to its high PAPR. Mobile phone communication suffer severe drawback during its amplification. When OFDM employed a non linear Power Amplifier (PA), it produces the fluctuation in amplitude of OFDM signal. This paper discusses the method to overcome PAPR in terms of its performance by using improved clipping technique for PAPR reduction. This method is easy to implement and reduces the amount of PAPR by clipping the peak of the maximum power signal. We present an improved method for PARR reduction for reducing peak magnitude of OFDM signal. This scheme simultaneously minimizes the peak magnitude of PAPR in OFDM signal.

This paper introduces four block joint detection (JD) receivers which combining the orthogonal frequency division multiplexing (OFDM) and code division multiple access (CDMA) techniques, i.e., OFDM-CDMA receiver. The performance of the OFDM-CDMA receiver with orthogonal and non-orthogonal spreading sequences is investigated in mobile radio channels. The sequences considered as spreading codes are orthogonal Walsh-Hadamard, Orthogonal Gold, Gold and maximim length sequences or m - sequences. The JD algorithms for the OFDM- CDMA receiver are Zero Forcing Block Linear Equalizer (ZF- BLE), Minimum Mean Square Error Block Linear Equalizer (MMSE-BLE), with and without decision feedback (DF). Time- domain equalization does not require DFT or FFT operations and can be used to compensate the channel fading effect. Hence for hardware implementation, the time domain interpretation can lead to a more efficient structure when compared with the frequency domain approach. The bit error rate (BER) performance comparisons of different spreading codes and equalizers are shown in the simulations.

In recent years, there has been an increased need for digital wireless applications to use high rate data transmission. OFDM (Orthogonal Frequency Division Multiplexing) offers an interesting solution that allows for the exploitation of the 60 GHz band with optimal spectral efficiency, a robustness to frequency selective fading, and a resistance to inter-symbol interference (ISI) that is a major problem in high speed data communications. Transmitted data in an OFDM system is divided on different subcarriers, after applying PSK (phase shift keying) or QAM (Quadrature Amplitude Modulation) modulation. The bandwidth of the obtained signal is converted to the time domain by using an IFFT (Inverse Fast Fourier Transform) in order to transmit it through a wireless channel. To recover the distorted data at the receiver, the effects of the channel must be estimated and compensated by the receiving system [1, 2]. In this paper, the 60 GHz channel estimation methods for OFDM systems based on comb-type pilot arrangement are investigated, as the algorithm of channel estimation based on comb-type is divided into pilot signal estimation and channel interpolation. The pilot signal estimation based on LS (Least Squares) or LMMSE (Linear Minimum Mean Square Error) criteria is studied along with the channel interpolation based on LI (linear interpolation). The performances of various estimation algorithms are evaluated and compared by measuring the Bit Error rate (BER) and Mean Square Error (MSE) where 16-QAM modulation scheme is applied.

An orthogonal frequency division multiplexing (OFDM) transmission system is known to exhibit superior performance compared to a single carrier system in a multipath environment. However, the communication quality degrades severely because of delayed waves exceeding the guard interval and the Doppler shift. To solve this problem, various systems have been proposed that use an adaptive array to suppress undesired signals. In this paper, we propose a system that uses the same signal in the guard interval inserted at the head and the guard interval at the tail of the OFDM effective symbol in an OFDM transmission system and operates a minimum mean square error (MMSE) adaptive array. To clearly show the effectiveness of the proposed system, we analyzed the basic performance by a computer simulation. These results demonstrated excellent operation as an MMSE adaptive array and superior undesired signal suppression. © 2003 Wiley Periodicals, Inc. Electron Comm Jpn Pt 1, 86(10): 1–9, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/ecja.10121

In comparison to Orthogonal Frequency Division Multiplexing (OFDM), Wavelet Packet Modulation (WPM) offers much lower side lobes in transmitted signal, which reduces inter-carrier interference (ICI) and narrowband interference (NBI). It is also spectrally efficient since it does not utilize cyclic prefix (CP), nevertheless, it requires an efficient equalization technique to counter the inter symbol interference (ISI) and ICI created by the channel. In this paper, performance comparison of OFDM and WPM for several multipath wireless channels is presented. We propose a novel application of zero-forcing (ZF) and minimum mean square error (MMSE) algorithms as time-domain channel equalization techniques for WPM systems. It is shown that, for a multipath wireless channel, WPM using MMSE-equalizer has a better bit error rate (BER) performance as compared to ZF-equalizer in WPM, as well as OFDM system.

Orthogonal Frequency Division Multiplexing (OFDM) is one of the attractive data transmission technologies in recent years because of its high data processing rate and its capable to combat inter-symbol interference (ISI) that come from multiple paths fading. Also, OFDM is the standard of new generation wireless communication systems. However, the high Peak-to-Average Power Ratio(PAPR) can influence the system performance through significantly degrading its signal quality in the nonlinear channel. Researchers propose several PAPR reduction algorithms, such as Clipping, Partial Transmit Sequences (PTS), selective mapping (SLM). In this paper we propose a novel turbo scheme combining PTS with adaptive tone reservation (TR) to reduce PAPR in OFDM systems. Conducted simulations show that the performance of PAPR with TR-enhanced Turbo PTS are superior to pervious works.