High speed data bus macro instruction set architecture

This paper presents the design and implementation of a pipelined 9-bit RISC Processor. The various blocks include the Fetch, Decode, Execute and Store result to implement 4 stage pipelining. Harvard Architecture is used which has distinct program memory space and data memory space. The only load and store is used to communicate with data memory. RISC using pipeline makes CPI as 1 and improves speed of execution. Verilog Language is used for coding purpose. The proposed architecture is then simulated using Modelsim. Reduced Instruction Set Computers (RISCs) are now use for all type of computational tasks. In the area of scientific computing, RISC workstations are being increasingly used for compute task such as DSP, DIP etc. RISC concepts help to achieve given levels of performance at significantly lower cost than other systems. Pipelined RISC improves speed and cost effectiveness over the ease of hardware description language programming and conservation of memory and RISC based designs will continue to grow in speed and ability. The main features of RISC processor are the instruction set can be hardwired to speed instruction execution. In the present work, the design of a 4-bit data width Reduced Instruction Set Computer (RISC) processor is presented. It has a complete instruction set, program and data memories, general purpose registers and a simple Arithmetical Logical Unit (ALU) for basic operations. In this design, most instructions are of uniform length and similar structure, arithmetic operations are restricted to CPU registers and only separate load and store instructions access memory. The architecture supports 8 instructions to support Arithmetic, Logical, Shifting, and load -store operations. Verilog HDL has evolved as a standard hardware description language. A hardware descriptive language is a language used to describe a digital system. HDL's allows the design to be simulated earlier in the design cycle in order to correct errors or experiment with different architectures. Designs described in HDL are technology- independent, easy to design and debug, and are usually more readable than schematics, particularly for large circuits. More recently Verilog is used as an input for synthesis programs which will generate a gate-level description for the circuit. The simulator which is used for the language is Xilinx ISE and Modelsim. Verilog is capable of describing simple behaviour. Machine cycle instructions allow the processor to handle several instructions at the same time. The processor can work at a high clock frequency and thus yields higher speed. This paper is about design of a simple RISC processor and synthesizing it. The RISC architecture follows single-cycle instruction execution.

Reduced Instruction Set Computing (RISC) processors have wide selection of applications performance on speed and better cache memory. The advanced RISC microprocessors are extensively used for many of the complicated systems. Reduced Instruction set Computing (RISC) is a CPU (Central Processing Unit) design mechanism that displays fundamental instruction set and performs better after comparison with the other microprocessor architecture and has the ability to perform commands per instruction through microprocessor cycles. The proposed processor is designed using Harvard architecture, having separate instruction and data memory. Building of a fully synthesizable 32-bit RISC processor with Fetching unit, Decoding unit, Data and instruction memory, and Execution unit. The RISC Processor design is synthesized and implemented using Xilinx ISE Tool and simulated using I-sim. A 32-bit RISC is simulated and checked through VIO IP cores. We can use debug feature to drive and monitor signals that are present on the real hardware. This work is intended with Verilog HDL and implemented with the help of development board using Artix-7 FPGA device. The outcomes of performance are evaluated in terms of area, timing performance and maximum frequency of operation. The RISC processor compares earlier comparable architecture with efficient developments.

Hardware software co-design plays a crucial part in the embedded processor development especially with the current advancement of reconfigurable platforms. The reconfigurability features offered by platforms such as Field Programmable Gate Array (FPGA) has permitted the modification of the internal processor architecture with lower cost and higher performance. While the hardware architecture could be changed through various methods, the modifications need to be complemented with a compatible assembler that suits the amended architecture. This paper presents a two-pass assembler design technique that adapts to any instruction set architecture (ISA) modifications being applied on a reconfigurable processor. A Reduced Instruction Set Computer (RISC) processor core, which is described in Verilog Hardware Description Language (HDL), is used as the testing platform whereby its ISA is expanded to include new instruction sets. The assembler is developed based on two-pass approach and the assembling process would generate a coefficient file that is used as initialization files during the FPGA implementation of the processor core. The assemblers have been successfully developed with correct output format and verified during the FPGA implementation using Xilinx Spartan-3AN board.

One potential disadvantage of a machine with a reduced instruction set is that object programs may be substantially larger than those for a machine with a richer, more complex instruction set. The main reason is that a small instruction set will require more instructions to implement the same function. In addition, the tendency of RISC machines to use fixed length instructions with a few instruction formats also increases object program size. It has been conjectured that the resulting larger programs could adversely affect memory performance and bus traffic. In this paper we report the results of a set of experiments to isolate and determine the effect of instruction set complexity on cache memory performance and bus traffic. Three high-level language compilers were constructed for machines with instruction sets of varying degrees of complexity. Using a set of benchmark programs, we evaluated the effect of instruction set complexity had on program size. Five of the programs were used to perform a set of trace-driven simulations to study each machine's cache and bus performance. While we found that the miss ratio is affected by object program size, it appears that this can be corrected by simplying increasing the size of the cache. Our measurements of bus traffic, however, show that even with large caches, machines with simple instruction sets can expect substantially more main memory reads than machines with dense object programs.

One potential disadvantage of a machine with a reduced instruction set is that object programs may be substantially larger than those for a machine with a richer, more complex instruction set. The main reason is that a small instruction set will require more instructions to implement the same function. In addition, the tendency of RISC machines to use fixed length instructions with a few instruction formats also increases object program size. It has been conjectured that the resulting larger programs could adversely affect memory performance and bus traffic. In this paper we report the results of a set of experiments to isolate and determine the effect of instruction set complexity on cache memory performance and bus traffic. Three high-level language compilers were constructed for machines with instruction sets of varying degrees of complexity. Using a set of benchmark programs, we evaluated the effect of instruction set complexity had on program size. Five of the programs were used to perform a set of trace-driven simulations to study each machine's cache and bus performance. While we found that the miss ratio is affected by object program size, it appears that this can be corrected by simplying increasing the size of the cache. Our measurements of bus traffic, however, show that even with large caches, machines with simple instruction sets can expect substantially more main memory reads than machines with dense object programs.

Chapter 11 - The ARM Architecture

The application of high speed data bus on the satellites having several remote sensors could not only satisfy the demand of high speed data transfer, but also could reuse the equipment at both the component and subsystem levels for other space missions, thus reducing the costs of on-board processing system integration. In this article, a special high speed data bus with simple interfaces is chosen for transferring the data produced by remote sensors and other instrumentations. First, the function and the structure of the data bus are discussed carefully. And then, the bus controller, which is a key module of the data bus, is designed. At last, the function and performance of the bus controller are verified by VHDL simulation.

To the present day, the performance of microprocessors has progressed dramatically. Recently, almost all computer systems use reduced instruction set computer (RISC) architectures. However, about 30 years ago, complex instruction set computer (CISC) architectures were widely used for almost all computer systems. The advantages and successes of RISC architectures are attributable to their simplified structures. Conventional complex instruction set computer (CISC) architectures invariably included various and numerous instruction sets. Each instruction was able to execute a complicated multi-step operation. For that reason, the CISC architectures were useful in assembler-based programming environments and in systems with small amounts of memory. However, such complicated architectures prevent increases in clock frequency or a processor’s processing power. Therefore, RISC architectures—which use simple architectures based on single-step instruction sets—have been developed. The RISC architectures present advantages in terms of higher clock frequency, smaller implementation area, and lower power consumption than conventional complex instruction set computer (CISC) architectures. Observation of many examples reveals that, in circuit implementations, a simple structure is best to increase the overall performance. That principle is also applicable to programmable devices. If clock-by-clock reconfigurable devices are used, even a single instruction set computer (SISC) can be implemented onto them. A single instruction set computer is one in which a processor has only a single instruction. During production, various single instruction set computers are prepared: a single instruction set computer with an AND logic function, a single instruction set computer with an adder function, and so on. These processor units are implemented at necessary times and at necessary places of a programmable device. In CISC and RISC architectures, the hardware is fixed. Its operations are switched using software commands, as portrayed in Fig. 1(a). In contrast, in a single instruction set computer, the operation changes are executed by hardware reconfigurations, as shown in Figs. 1(b) and 1(c). Therefore, in a single instruction set computer, a processor with a certain function itself can be reconfigured to another processor with another function. The implementation of such single instruction set computers provides the following advantages under programmable device implementations. A single instruction set computer with the simplest architecture can operate at the highest clock frequency among all processor architectures. In RISC architectures, many selectors to change functions are implemented; such selectors have a certain delay. However, single instruction set computers

The RISC-V instruction set has advanced and expanded significantly in recent years. It is an open instruction set architecture (ISA) based on the concept of Reduced Instruction Set Computing (RISC). This article uses Verilog to design a 5-stage pipeline CPU based on RISC-V architecture in Vivado 2022.2. The CPU can execute 38 instructions and optimises its arithmetic logic unit (ALU) by optimising adders, shifters, and multipliers. Next, write a testbench in the simulation software to verify the functionality of the CPU. RTL diagrams and reports are then generated to verify the design structure and evaluate resource allocation. Finally, the CPU successfully executes the instruction and obtains the correct operation result, and the occupation of LUT resources in the shifter part is reduced. This work serves as an important reference for system-on-chip (SoC) and computer design in general. It not only highlights the potential of the RISC-V architecture but also demonstrates the success of optimisation efforts. This paves the way for more powerful and efficient computing systems.

In an era where computational demands continually escalate, the quest for more efficient and powerful processors persists. Computer engineering and VLSI design industries are facing challenges with the trade-offs between the cost and performance of components in the implementation domain. Reduced Instruction Set Computer (RISC) architecture relies its focus mainly on scaling down the complexity and the number of instructions in the microprocessor. RISC-V is an Open-source Instruction set architecture (ISA) designed to be simple, modular, and customizable. The most important feature of RISC is that it supports load-store architecture. With this feature, an optimized 32-bit microprocessor has been designed with Verilog, simulated and synthesized in Xilinx Vivado. Verilog enables us to describe the behavior and structure of our processor at a register-transfer level. Overall, RISC-V's combination of simplicity, openness, and flexibility positions it as a promising ISA for a wide range of applications, from low-power IoT devices to high-performance computing systems.

This paper describes the engineering simulator developed by Korea Aerospace Research Institute (KARI). The main purpose of this simulator is to carry out research and development work in developing a new transport type aircraft. The simulator is composed of low cost, high fidelity subsystems and components capable of complying the top-level requirements by the regulatory body. These components are interconnected via high speed data bus and communication network, while operating with the in-house developed real-time flight simulation software. Throughout the development process, much of the design emphasis is concentrated upon flexibility, expansibility and modularity of the system software and hardware. This paper presents the overall development program of the KARI engineering simulator, including the discussions of study on the use of flight simulator for prototype design, the design requirements and objectives, and the overall features of the simulator. Also discussed are the further development in progress and some of the ongoing research work and future plans.

Results are presented on the in-situ radiation response of three commercial hybrid optical receivers of the type used in high speed fiber optic networks. When subjected to a 2.5 MeV pulsed electron beam, a receiver that contained a GaAs MESFET was found to exhibit transient effects in response to a dose as low as ~50 Rads. Two other receivers containing no GaAs FETs suffered little or no amplitude perturbation on exposure to 200 - 400 Rads(GaAs) per pulse. The radiation response of the first receiver is shown to be consistent with the long term transient response of conventional GaAs MESFETs. Implications for circuit design and for several high speed data buses are discussed.

Register array processor

We describe a novel architectural framework that allows software applications written for a given Complex Instruction Set Computer (CISC) to migrate to a different, higher performance architecture, without a significant investment on the part of the application user or developer. The framework provides a hardware mechanism for seamless switching between two instruction sets, resulting in a machine that enhances application performance while keeping the same program behavior (from a user perspective). High execution speed on migrated applications is achieved through automated translation of the object code of one machine to that of the other, using advanced global optimization and scheduling techniques. Issues affecting application behavior, such as precise exceptions, as well as self-modifying code, are addressed. Relaxation of full compatibility on these issues lead to further possible performance gains, encouraging applications to adopt the newer architecture.The proposed framework offers a path for moving from complex instruction set computers (CISCs) to newer architectures, such as reduced instruction set computers (RISCs), superscalars, or very long instruction word (VLIW) machines, while protecting the extensive economic investment represented by existing software. To illustrate our approach, we show how system code written (and compiled) for the IBM System/390 can yield fine-grain parallelism, as it is targeted for execution by a VLIW machine, with encouraging performance results.

Reduced Instruction Set Computer Five (RISC-V) is an open-source processor instruction set architecture which is rapidly gaining popularity in space applications. Not only can this architecture be implemented in standalone application specific integrated circuit (ASIC) hardware processors, but can be configured within field-programmable gate array (FPGA) fabrics. This paper will discuss the benefits and challenges of using RISC-V soft-cores within radiation-tolerant FPGAs for embedded space applications. Spacecraft are limited by size, weight, power, and cost (SWAP-C), and most rely on both FPGAs and discrete microprocessors to meet onboard processing needs. With advances in capacity for radiation-hardened FPGAs, it is now feasible to implement an advanced soft-core microprocessor (or even multiple cores) within the FPGA itself. This has potential to reduce part count and simplify designs greatly, make efficient use of spare FPGA capacity, and reduce the overall SWAP-C of spaceflight computers. The research team tested the latest RISC-V FPGA offerings from Microchip (product name Mi-V) and CAES (product name NOEL-V). The performance of these processor implementations was measured on a standard benchmark suite across multiple operating systems on evaluation hardware. This paper describes our test methodology, analysis, and conclusions.