High speed robust image registration and localization using optimized algorithm and its performances evaluation

Geometric correction is used to correct the registration errors in remotely sensed images. These images are often compared to ground control points (GCPs) either by using an accurate map (image to map) or using another geo-referenced image (image to image) and then resampled. Accordingly, the exact locations and the appropriate pixel values can be calculated in more accurate, time-wise and effortless manner. In the traditional methods, the GCPs are manually selected and then the transformation models are applied which yield time consuming and less accurate processes. The objective of this work is to develop an automatic approach for image registration based on another geo-referenced image using five feature extraction models. They are Scale Invariant Feature Transform (SIFT), Speeded Up Robust Features (SURF), Discrete Wavelet Transforms (DWT), (SIFT & DWT), and (SURF & DWT). The GCPs were selected based on the least-squares adjustments as the basis for improving the spatial accuracy of all the linking points in both images. The obtained results showed that models have higher accuracy in image registration with Root Mean Square Error (RMSE) less than 0.5. The developed automated image registration method provides more accurate results and saves time, money and effort.

Speeded Up Robust Features (SURF) algorithm is a fast robust local feature matching method. Because of the advantage of invariance of scale and rotation, the SURF algorithm has been widely used in the image registration. However, due to the acquired angle, imaging mode, different resolution, SURF algorithm becomes quite difficult in the image registration. This paper presents a normalized SURF algorithm which can reduce the impact of hue difference between remote sensing images. Combined with the idea of two-way matching, the normalized SURF is able to improve the accuracy of the image registration. The experimental results show the normalized SURF algorithm can keep greater accuracy and relatively higher speed of matching than the original SURF algorithm.

To explore the impact of different image registration algorithms on the diagnosis of visual path damage in patients with primary open angle glaucoma (POAG), 60 cases of suspected POAG patients were selected as the research objects. Shape-preserving scale invariant feature transform (SP-SIFT) algorithm, scale invariant feature transform (SIFT) algorithm, and Kanade-Lucas-Tomasi (KLT) algorithm were compared and applied to MRI images of 60 POAG patients. It was found that the SP-SIFT algorithm converged after 33 iterations, which had a higher registration speed than the SIFT algorithm and the KLT algorithm. The mean errors of the SP-SIFT algorithm in the rotation angle, X-direction translation, and Y-direction translation were 2.11%, 4.56%, and 4.31%, respectively. Those of the SIFT algorithm were 5.55%, 9.98%, and 7.01%, respectively. Those of the KLT algorithm were 7.45%, 11.31%, and 8.56%, respectively, and the difference among algorithms was significant ( P < 0.05 ). The diagnostic sensitivity and accuracy of the SP-SIFT algorithm for POAG were 96.15% and 94.34%, respectively. Those of the SIFT algorithm were 94.68% and 90.74%, respectively. Those of the KLT algorithm were 94.21% and 90.57%, respectively, and the three algorithms had significant differences ( P < 0.05 ). The results of MRI images based on the SP-SIFT algorithm showed that the average thickness of the cortex of the patient’s left talar sulcus, right talar sulcus, left middle temporal gyrus, and left fusiform gyrus were 2.49 ± 0.15 mm, 2.62 ± 0.13 mm, 3.00 ± 0.10 mm, and 2.99 ± 0.17 mm, respectively. Those of the SIFT algorithm were 2.51 ± 0.17 mm, 2.69 ± 0.12 mm, 3.11 ± 0.13 mm, and 3.09 ± 0.14 mm, respectively. Those of the KLT algorithm were 2.35 ± 0.12 mm, 2.52 ± 0.16 mm, 2.77 ± 0.11 mm, and 2.87 ± 0.17 mm, respectively, and the three algorithms had significant differences ( P < 0.05 ). In summary, the SP-SIFT algorithm was ideal for POAG visual pathway diagnosis and was of great adoption potential in clinical diagnosis.

위성 SAR 영상의 활용이 증가하면서 영상의 해석 및 융합을 위한 정밀 기하보정에 대한 필요성이 높아지고 있다. 특히 광역감시 목적으로 활용되기 위해 서로 다른 해상도를 갖는 SAR 영상간 정보융합도 활발해지고 있다. 일반적으로 SAR 영상의 기하보정은 위성의 궤도 및 자세정보를 활용하여 수행할 수 있지만 SAR 센서의 궤도 및 시스템 오차, 대상지형 특성에 의한 왜곡으로 인해 추가적인 보정이 필요하게 된다. SAR 영상을 통한 변화탐지나 타 영상과의 융합에 적용하기 위해서는 기하 오차 보정이 반드시 선행되어야 한다. 이를 위해 다수의 지상 기준점을 선정하고 이를 포함하는 기준 영상과 비교하여 원본 영상에서 대응점을 찾는 방식으로 정밀 기하보정을 수행할 수 있다. Speeded Up Robust Feature (SURF) 기법은 쉽고 빠르게 영상의 기준점을 찾을 수 있지만 상대적으로 해상도가 낮고 스펙클 잡음에 영향을 받는 SAR 영상에서는 활용하기가 어렵다고 알려져 있다. 본 논문에서는 SURF 기법을 위성 SAR 영상에 적용할 때 발생할 수 있는 오차를 추출하고 영상 특성에 따른 성능 변화를 분석하였다. SURF 알고리즘의 적용이 가능한 입력 변수의 적정 범위를 제시하고 그에 따른 영상 정합의 오차를 분석하여 중저해상도의 위성 SAR 영상에 대해서도 SURF 기법을 통한 기하 보정 및 영상 정합이 적용될 수 있음을 검증하였다. As applications of spaceborne SAR imagery are extended, there are increased demands for accurate registrations for better understanding and fusion of radar images. It becomes common to adopt multi-resolution SAR images to apply for wide area reconnaissance. Geometric correction of the SAR images can be performed by using satellite orbit and attitude information. However, the inherent errors of the SAR sensor's attitude and ground geographical data tend to cause geometric errors in the produced SAR image. These errors should be corrected when the SAR images are applied for multi-temporal analysis, change detection applications and image fusion with other sensor images. The undesirable ground registration errors can be corrected with respect to the true ground control points in order to produce complete SAR products. Speeded Up Robust Feature (SURF) technique is an efficient algorithm to extract ground control points from images but is considered to be inappropriate to apply to SAR images due to high speckle noises. In this paper, an attempt is made to apply SURF algorithm to SAR images for image registration and fusion. Matched points are extracted with respect to the varying parameters of Hessian and SURF matching thresholds, and the performance is analyzed by measuring the imaging matching accuracies. A number of performance measures concerning image registration are suggested to validate the use of SURF for spaceborne SAR images. Various simulations methodologies are suggested the validate the use of SURF for the geometric correction and image registrations and it is shown that a good choice of input parameters to the SURF algorithm should be made to apply for the spaceborne SAR images of moderate resolutions.

Indexing images represents a necessary tool for various domains related to computer vision such as video surveillance and movements analysis. Visual characteristics of image such as color, texture, shape are used to identify the content of these frames. The high increase of data (Big Data) makes us face a problem of curse of dimensionality. In this paper, we propose a cloud-based technique for images indexing images using PCA (Principal component analysis) and a binary tree. Our work consists of exploiting SIFT (Scale Invariant Feature Transform) and SURF (Speeded up Robust Features) descriptors as frames features, PCA as dimensionality reduction method of SIFT and SURF features and the binary tree representation of these images in order to accelerate the research phase and reduce the storage space. Our approach consists of developing a system based on three phases: indexing images with SIFT and SURF features, compression within the application of PCA and finally the image retrieval in the cloud.

Copy-Move forgery is the most widely used way to tamper image for creating the forged images. The meaning of the photograph is changed by forging or concealing the images. Copy move is a very common technique for image forgery; tools used for retouching are applied along with it making naked eyes difficult to detect the copy move. Hence, the verification of authenticity and integrity is very essential of the image. The copy-move forgery detection can be divided into two heads a) Block based method b) Keypoint based. In the case of blocked based method, the method is exceptionally good in detecting the forged regions with higher accuracy but uses extremely high power of computation. Speed up Robust Feature (SURF) and Scale Invariant Feature Transform (SIFT) are invariant with respect to geometrical and illumination transform. In this paper we review the different keypoint approach which is a better approach or alternate to block-based approach due to invariancy property of SURF and SIFT. The keypoint based copy-move forgery detection schemes involve, identifying and relating the localized features of the images using the algorithms like SIFT and SURF.

The present work demonstrates the utilization of computer-aided diagnosis system for the detection of lung cancer diseases using computer tomography (CT) images, magnetic resonance images (MRI) and X-ray images. The feature extraction process in lung cancer images has been achieved by scale invariant feature transform (SIFT), speeded up robust features (SURF), and principal component analysis (PCA) techniques. In this work, a comparative investigation of different feature extraction technique such as SIFT, SURF, and PCA has been discussed in order to find the best descriptor for feature extraction of cancerous subjects to the normal subjects in terms of two parameters named as execution time and error rate. The main aspect of these learning approaches is to find the valid key points in minimum execution time with least error. The results reveal that the SURF technique has an average execution time of 0.448 s with an average error rate value of 25.704 which is least among three techniques. Hence, SURF extraction technique is best as compared to SIFT and PCA.

This paper proposes a feature-based image registering technique for remote sensing satellite images. The system is composed of multiple steps in which various image processing techniques are used. Speed-up Robust Features (SURF) and Scale Invariant Feature Transform (SIFT) can be mounted alternatively to detect and define features on images. We also address the issues of registering multi-spectral and multi-temporal images. The effectiveness of the proposed technique has been studied by registering partially overlapping satellite mosaic images of the Marmara Sea. The images were captured by the recently-launched LandSat-8 satellite.

In recent years, Ambient Intelligence (AmI) has attracted increased attention within the advanced technology industry in an effort to modernize and develop a more intelligent and reliable information system. Technologies to detect a specific object in images are expected to further expand to wide range of applications, such as car detection functions for Intelligent Transport System (ITS) and other systems. Computer vision and pattern recognition are emerging fast and will continue to grow together with local feature detection methods. In this paper, we propose an object detection and tracking system which is based on Scale Invariant Feature Transform (SIFT) and Speed Up Robust Features (SURF) feature extraction methods. From the evaluation results, we observe that the accuracy of matched keypoints of SURF algorithm are higher than SIFT.

Local feature matching has become a commonly used method to compare images.For tracking and human detection, a reliable method for comparing images can constitute a key component for localization and loop closing tasks.two different types of image feature algorithms, Scale -Invariant Feature Transform (SIFT) and the more recent Speeded Up Robust Features (SURF), have been used to compare the images.In this paper, we propose the use of a rich set of feature descriptors based on SIFT and SURF in the different color spaces.

In order to improve the speed of stitching and information extraction of remote sensing images, based on the UAV (Unmanned Aerial Vehicle) image stitching algorithm, this paper proposes a UAV image matching method based on the combination of SURF (Speeded Up Robust Features) and MASC (M-Estimate Sample Consensus) algorithm. the SURF algorithm is fast, and the MASC algorithm can effectively eliminate mismatch points and has high stability. In this paper, the SIFT (Scale-invariant feature transform) algorithm, SURF algorithm, SURF and RANSAC (Random Sample Consensus) algorithm as well as SURF and MASC algorithm are used to stitch the same two images and compare them respectively. The experimental results show that the lowest image matching error rate is only 2.13% and the matching time is 4.772670s when using the combination of SURF and MASC algorithm for image stitching, which has certain advantages.

With the recent evolution of technology, the number of image archives has increased exponentially. In Content-Based Image Retrieval (CBIR), high-level visual information is represented in the form of low-level features. The semantic gap between the low-level features and the high-level image concepts is an open research problem. In this paper, we present a novel visual words integration of Scale Invariant Feature Transform (SIFT) and Speeded-Up Robust Features (SURF). The two local features representations are selected for image retrieval because SIFT is more robust to the change in scale and rotation, while SURF is robust to changes in illumination. The visual words integration of SIFT and SURF adds the robustness of both features to image retrieval. The qualitative and quantitative comparisons conducted on Corel-1000, Corel-1500, Corel-2000, Oliva and Torralba and Ground Truth image benchmarks demonstrate the effectiveness of the proposed visual words integration.

Nowadays, an aerial closed-circuit television provides an outsize quantity of information compared with ancient closed-circuit television. But, it suffers from unsought cameras motion that presents new challenges. This paper presents a work on video stabilization and detection of the objects which are in moving position, system supported camera motion estimation. Most effective algorithms SIFT (Scale Invariant Feature Transform) and SURF (Speeded Up Robust Features) used for feature extraction. When estimating the worldwide parameters of camera motion victimization transformation, we have a tendency to find moving object by Kalman filtering. SURF (Speeded up Robust Features) is additionally a property extraction algorithmic rule works nearly like SIFT algorithmic rule, however quicker than SIFT.

Feature point extraction and matching are the key modules in the front-end of visual simultaneous localization and mapping (SLAM), which determines the accuracy of locating and map Nbuilding robots. To obtain a good performance, the image extraction algorithm being applied should have high efficiency and robustness to the changes of the surrounding environment. In this paper, three widely used feature extraction algorithms, namely Scale-invariant feature transform (SIFT), speed up robust features (SURF) and oriented FAST, and rotated BRIEF (ORB), are studied. The basic concepts and details of the three algorithms are introduced. Then the execution time of the three algorithms is compared to evaluate their efficiency. Meanwhile, the key points matching rate of the three algorithms are compared under various transformations and distortions. The experiment results show that ORB has higher efficiency than SIFT and SURF. However, SIFT has better robustness to image rotation, illumination change, scaling transformation, Gaussian noise and salt-and-pepper noise. In addition, the performance of the ORB-SLAM system is tested on different datasets. It has great ability in camera trajectory estimation and map building and therefore is suitable for deploying in industry.

Object recognition is a key research area in the field of image processing and computer vision, which recognizes the object in an image and provides a proper label. In the paper, three popular feature descriptor algorithms that are Scale Invariant Feature Transform (SIFT), Speeded Up Robust Feature (SURF) and Oriented Fast and Rotated BRIEF (ORB) are used for experimental work of an object recognition system. A comparison among these three descriptors is exhibited in the paper by determining them individually and with different combinations of these three methodologies. The amount of the features extracted using these feature extraction methods are further reduced using a feature selection (k-means clustering) and a dimensionality reduction method (Locality Preserving Projection). Various classifiers i.e. K-Nearest Neighbor, Naive Bayes, Decision Tree, and Random Forest are used to classify objects based on their similarity. The focus of this article is to present a study of the performance comparison among these three feature extraction methods, particularly when their combination derives in recognizing the object more efficiently. In this paper, the authors have presented a comparative analysis view among various feature descriptors algorithms and classification models for 2D object recognition. The Caltech-101 public dataset is considered in this article for experimental work. The experiment reveals that a hybridization of SIFT, SURF and ORB method with Random Forest classification model accomplishes the best results as compared to other state-of-the-art work. The comparative analysis has been presented in terms of recognition accuracy, True Positive Rate (TPR), False Positive Rate (FPR), and Area Under Curve (AUC) parameters.