Hyperparameter Tuning of Long Short-Term Memory Model for Clickbait Classification in News Headlines

This study compares the performance of Long Short-Term Memory (LSTM) and Bidirectional LSTM (Bi-LSTM) models in predicting earthquake occurrences in the Tokai region, using data from the United States Geological Survey (USGS) dataset. Given the importance of accurate earthquake prediction, particularly in high-risk regions, this research focuses on assessing the effectiveness of each model in identifying occurrence and non-occurrence events. Both models were tuned to optimize sensitivity and specificity through adjustments in sequence length, learning rate, and additional hyperparameters, with results evaluated using metrics including sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and area under the curve (AUC). Findings reveal that while both models achieved high sensitivity, the LSTM model demonstrated superior specificity and AUC, indicating a more balanced performance in distinguishing between earthquake occurrences and non-occurrences. The results show that LSTM outperforms Bi-LSTM in terms its classification metrics. LSTM achieved an accuracy of 76%, compared to 55% for Bi-LSTM. For the AUC metric, LSTM scored 66%, while Bi-LSTM scored 67%.

Tanzania heavily depends on United States Dollar (USD) foreign currency to import various goods and services into the country. Failure to correctly forecast exchange rates between USD and Tanzanian Shillings (TZS) may pose risks such as inability to import intended goods and services, possibility of losing money in stock exchange markets and other investment businesses in case of unexpected currency appreciation or depreciation as well as poor investment decisions in foreign exchange markets. To address this, this study has developed and comparatively evaluated performances of LSTM (Long Short-Term Memory) and BiLSTM (Bidirectional LSTM) deep learning models for forecasting daily USD to TZS exchange rates. The findings reveal that, BiLSTM model outperforms LSTM in forecasting daily USD to TZS exchange rates, achieving a MAPE (Mean Absolute Percentage Error) score of 0.363 on test set (unseen data) compared to a MAPE score of 1.471 achieved by LSTM model. This study recommends to the prospective Artificial Intelligence (AI) researchers and software developers to use BiLSTM instead of LSTM model to forecast (predict) USD to TZS exchange rates. Also, this study has developed USD to TZS exchange rates dataset which can be used by AI researchers, saving them time and costs involved with creating datasets from scratch. This study has also developed ready to use BiLSTM and LSTM models which can be used by Tanzanian business men and women involved in stock exchange markets, foreign exchange markets and other businesses, to predict daily USD to TZS exchange rates and make appropriate business and investment decisions.

This study addresses the accuracy challenges in e-commerce sentiment classification and thus provides valuable insight for businesses to enrich strategies toward the interpretation of customer feedback and improvement of product development. This article elaborately contrasts long short-term memory (LSTM)-based models with traditional machine learning models, like support vector machines (SVM), random forest, and Naive Bayes classifiers. The authors have used a large dataset of customer reviews from famous e-commerce websites, pre-processed for noise reduction and standardization of the input. Our LSTM models were implemented using state-of-the-art deep learning frameworks, with special consideration while performing hyperparameter tuning. The results showed that the bidirectional LSTM model had the best performance of 92.1% in accuracy, 91.8% in precision, 92.0% in recall, and an F1-score of 91.9%. In comparison, traditional machine learning approaches gave accuracies: 86.5% for SVM, 85.1% for random forest, and 82% for Naive Bayes. Hyperparameter tuning returned the best configurations for the LSTM models: 128 LSTM units, a dropout of 0.3, with learning rates 0.001 for LSTM and 0.0001 for bidirectional LSTM. These optimizations contributed hugely to the performance improvements observed in these models. Error analysis gave insights into the challenges that the models faced. Sarcasm and irony accounted for 22% of the classification errors, while mixed sentiment accounted for 18%, and implicit accounted for 15%. To sum up, this research has shown the efficiency of LSTM models on e-commerce user review sentiment analysis, especially bidirectional LSTM. These models show a much better result in sentiment classification compared to traditional machine learning techniques, which proves them to have huge potential for improving the accuracy of the task in real-world applications.

This study examines the efficacy of three distinct machine learning models for sentiment analysis: Bidirectional Long Short-Term Memory (Bi-LSTM), Long Short-Term Memory (LSTM), and Logistic Regression. One of the most important tasks in natural language processing is sentiment analysis, which entails categorizing reviews as positive or negative. Fifty thousand sentiment-labeled movie reviews make up the dataset. To determine the most precise and effective technique for sentiment categorization, we put these models into practice and evaluated their respective performances. The highest accuracy of 89.42% is achieved by Logistic Regression, with precision of 88.35%, recall of 91.01%, and F1-score of 89.66%. The LSTM model, well-known for capturing temporal dependencies in text, obtained an accuracy of 86.23%, precision of 89.60%, recall of 82.22%, and an F1-score of 85.75%. The Bi-LSTM model, which processes input sequences in both forward and backward directions to better capture context, demonstrated accuracy of 87.65%, precision of 88.67%, recall of 86.54%, and an F1-score of 87.60%. The results show that although Logistic Regression performs better in accuracy, the Bi-LSTM model offers a substantial trade-off between precision and recall, making it a viable option for sentiment analysis applications. Despite its minor accuracy lag, the LSTM model provides important insights into the sequential relationships of the text data.

Wearable electroencephalography (EEG) devices for seizure detection accuracy and reliability are deep learning (DL) applications in the field of epilepsy diagnosis. In this study, we sought to increase the accuracy of seizure detection using advanced DL algorithms on the Children’s Hospital Boston - Massachusetts Institute of Technology (CHB-MIT) EEG database. First, a fully convolutional network (FCN) was trained and assessed using accuracy and recall/precision metrics, and the early stopping technique was used to avoid overfitting. To assess the performance, the FCN was evaluated in terms of various metrics, including accuracy, precision, recall, F1-score, and receiver operating characteristic (ROC)-area under the curve (AUC). In addition, two-dimensional (2D) convolutional neural networks (CNNs) and long short-term memory (LSTM) models were used to model the database, and their performance was thoroughly measured using different metrics, graphs, and confusion matrices. Using LSTM variants, such as standard LSTM, bidirectional LSTM, stacked LSTM, and LSTM attention mechanisms, hybrid convolutional LSTM (ConvLSTM) models were trained and compared. The comparison was conducted based on the training and validation accuracy and loss, as well as the graphs resulting from the precision–recall curves. Apart from DL approaches, EEG signal analysis using time–frequency techniques, such as wavelet transform and short-time Fourier transform, has also been investigated. These methods assisted in the analysis of the time–frequency features of EEG signals in combination with DL models. This study demonstrates that the performance of wearable EEG devices can be augmented using a combination of DL and seizure signal processing techniques. The FCN achieved an accuracy of 92%, with a recall for seizures of 33%, an F1-score of 0.03, and strong ROC-AUC results. The 2D CNN achieved 96% accuracy, a seizure recall of 70%, an F1-score of 0.12, and an ROC-AUC score of 78%. The baseline LSTM struggled with effectiveness at 53% accuracy with a seizure recall of 18%. In contrast, the LSTM model, which incorporated synthetic minority oversampling technique (SMOTE) balancing, was able to reach improvements of up to 89% accuracy, with a precision of 91%, a recall of 86%, an F1-score of 0.89, and a strong ROC curve performance. Among the models, the LSTM with SMOTE was the best performer, with 89% accuracy, 91% precision, 86% recall, and an F1-score of 0.89. These results provide evidence that applying techniques for data balancing in combination with certain DL network architectures significantly improves the detection of seizures using wearable EEG devices worn on the body. We believe that real-time monitoring and high-performance systems are feasible using optimized DL frameworks. The analysis of the performance of different models allows for the understanding of the possibilities of optimizing the architectures of DL algorithms for the modern diagnosis of epilepsy in real time. The source code used to carry out the experiments is publicly available at CHB-MIT EEG Dataset Python Scripts (https://www.kaggle.com/code/adnankust/adnaneeg1).

The system proposed in this paper aims to predict cryptocurrency prices using Bi-Directional Long Short- Term Memory (LSTM), leveraging historical data obtained from Yahoo Finance and CoinGecko APIs. The goal is to assess LSTM models effectiveness in forecasting cryptocurrency prices and offer an interactive interface for users to visualize historical and forecasted prices. Several research works have been conducted on the prediction of cryptocurrency prices through various Deep Learning (DL) based algorithms. This project comprises two main approaches : one involves data analysis, LSTM modeling, and change point detection using Yahoo Finance data, while the other focuses on LSTM model training and price prediction using CoinGecko API data. The paper suggests that the prediction models it presents are useful for traders, investors, [6] and finance academics and are close to accurate at predicting the values of cryptocurrencies. Future research will examine more advanced deep learning architectures, primarily Transformer-based models like the GPT series, to improve pattern detection in bitcoin data. Integrating other data sources, such as sentiment analysis or blockchain measurements, may increase the accuracy of forecasting. With further research into cutting-edge techniques, cryptocurrency forecasting will get better and provide stakeholders with more information to help them make informed decisions. Keywords— Cryptocurrency ; forecasting ; Bi-Directional LSTM Model ; Time-series forecasting ; Machine learning

Many countries around the globe, including Tanzania, are investing in renewable energy, partly because of the need to increase electric power generation and meet the ever-increasing electricity demands, and partly because of the need to combat global climate change caused by carbon emissions from fossil fuel-based electricity production. Kishapu Solar Project, located in Kishapu District, Shinyanga Region, Tanzania, is one of the renewable energy projects with a planned generation of 150 MW of electric power once completed, using solar photovoltaic technology. Accurate forecasting of solar radiation is important in managing and maintaining solar energy plants. Inaccurate forecasting of solar radiation can lead to poor harvest of solar energy and poor management of solar energy plants, which directly impacts electricity contribution to the national electricity grid. Long Short-Term Memory (LSTM) and its variant, PeepHole LSTM, are examples of Deep Learning models that can be used to predict solar radiation. The purpose of PeepHole LSTM is to introduce “peephole” connections in the LSTM model, which allow LSTM gates to directly inspect memory cell state and hence have richer information to process. However, there is still a research gap on the impact of “peephole” connections on the prediction performance of the LSTM model, especially in the context of forecasting solar radiation in Kishapu District, where the Kishapu Solar Project is located. The purpose of this study is to fill this research gap by developing both LSTM and PeepHole LSTM models and comparing their performances in forecasting solar radiation in Kishapu District. The 14-year Kishapu District daily solar radiation (Downward Shortwave Radiation) dataset was first pre-processed by scaling (normalizing) it using Standard Scaler and then split into training set (the first 70%), validation set (the next 15%) and test set (the last 15%) before being utilized to train and test the developed LSTM and PeepHole LSTM models. Both LSTM and PeepHole LSTM models used the previous 5 days' solar radiation values as inputs to predict the output (next day (6th day) solar radiation value). The trained and better-performing model between the two was finally saved in .h5 format and integrated with a Gradio based Web Application to provide a user interface for officials in Kishapu District and at Kishapu Solar Project to predict daily solar radiation. The findings from performance evaluation revealed that the LSTM model outperformed the PeepHole LSTM model in predicting solar radiation by achieving test Mean Absolute Error (MAE) and Root Mean Squared Error (RMSE) scores of 26.22 W/m2 and 36.65 W/m2, respectively, compared to MAE and RMSE scores of 30.84 W/m2 and 41.88 W/m2, respectively, achieved by the PeepHole LSTM model, concluding that “peephole” connections reduce the performance of the LSTM model rather than increasing it when used to forecast solar radiation in Kishapu District. This study’s recommendation to Artificial Intelligence (AI) software developers and researchers is to use the LSTM rather than the PeepHole LSTM Deep Learning model when forecasting solar radiation in Kishapu District and in locations with similar climatic conditions

An accurate electrical Short-term Load Forecasting (STLF) is an eminent factor in the power generation, electrical load dispatching and energy planning for the power supply companies, specifically in developing countries. This paper proposes a novel temporal feature selection-based Long Short-term Memory (LSTM) model developed by the combination of standard Artificial Neural Network (ANN) layer and LSTM for electrical short term load forecasting. The LSTM model has excellent capability of predicting the stochastic nature of an hour ahead electrical loads. The standard ANN layer consisting 11 neurons is used as an input to LSTM cells. Such a combination of ANN layer with LSTM was never proposed before. The proposed model accommodates variations in weather as well as temporal inputs like humidity, holidays, and date-time features in the hourly load data of the power supply company situated in Johor, Malaysia. This paper gives the insights of hyper parameter tuning to capture the more generalized electrical load patterns in the dataset without compromising the time complexity of the proposed model. The proposed approach was compared with five existing approaches, namely: ANN, LSTM model 1, LSTM model 2, LSTM model 3 and Convolutional Neural Network-LSTM (CNN-LSTM) using hourly load dataset of Johor. The experimental results demonstrate that the proposed approach outperformed the existing approaches in terms of root mean square error, mean absolute percentage error and Diebold-Mariano statistical inference test within 95% confidence interval.

The effective integration of photovoltaic (PV) systems into the grid which facilitates better planning and resource allocation depends on accurate day-ahead solar power forecasts. This paper proposes a Long Short-Term Memory (LSTM) model for forecasting solar power generation one day in advance with the algorithm inspired by Ant Colony Optimization (ACO). A year's worth of real-time data for a 4.5 kW PV system is used to train and test the model with input characteristics including temperature, PV power production and solar irradiation. Over the course of three seasons—summer, winter, and monsoon—the performance of the ACO-optimized LSTM model is contrasted with that of a simple LSTM model and an LSTM model enhanced by particle swarm optimization (PSO). This encompasses metrics like R-squared (R²) values, Mean Absolute Error (MAE) and Root Mean Square Error (RMSE). The PSO-optimized LSTM model (MAE of 0.31 kW, RMSE of 0.38 kW and R² of 0.88) and the baseline LSTM model (MAE of 0.35 kW, RMSE of 0.42 kW and R² of 0.85) couldn't match the ACO-optimized LSTM model's summertime MAE of 0.27 kW, RMSE of 0.33 kW and R² of 0.92. Similar trends also surfaced throughout the monsoon and winter seasons, with the ACO-optimized model consistently outperforming the others. In the winter, for instance, it obtained an R² of 0.93, an RMSE of 0.26 kW and an MAE of 0.22 kW. With regard to hyper parameter optimization and overall performance, these findings demonstrate the ACO-optimized LSTM model's superiority over the baseline and PSO-optimized LSTM models highlighting its improved prediction precision for all seasons. The effectiveness of ACO in bolstering solar power forecast models is confirmed by this study and provides a solid basis for deep learning model improvement in practical PV applications.

Rainfall forecasting, especially extreme rainfall forecasting, is one of crucial tasks in weather forecasting since it has direct impact on accompanying devastating events such as flash floods and fast-moving landslides. However, obtaining rainfall forecasts with high accuracy, especially for extreme rainfall occurrences, is a challenging task. This study focuses on developing a forecasting model which is capable of forecasting rainfall, including extreme rainfall values. The rainfall forecasting was achieved through sequence learning capability of the Long Short-Term Memory (LSTM) method. The identification of the optimal set of features for the LSTM model was conducted using Random Forest and Granger Causality tests. Then, that best set of features was fed into Stacked LSTM, Bidirectional LSTM, and Encoder-Decoder LSTM models to obtain three days-ahead forecasts of rainfall with the input of the past fourteen days-values of selected features. Out of the three models, the best model was taken through post hoc residual analysis and extra validation approaches. This entire approach was illustrated utilizing rainfall and weather-related measurements obtained from the gauging station located in the city of Ratnapura, Sri Lanka. Originally, twenty-three features were collected including relative humidity, ssunshine hours, and mean sea level pressure. The performances of the three models were compared using RMSE. The Bidirectional LSTM model outperformed the other methods (RMSE < 5 mm and MAE < 3 mm) and this model has the capability to forecast extreme rainfall values with high accuracy.

The long short-term memory (LSTM) model is widely used in multiple areas, mainly for speech recognition, natural language processing and activity recognition. In the last few years, we started to see many variants of LSTM for recurrent neural networks since its inception in 1997. However, there weren’t many studies that have addressed the LSTM’s gating mechanism. In this paper, we propose a novel LSTM framework where we modify the architecture of the LSTM unit by adding a new layer that we call the “outlier gate”. The latter controls the flow of information that goes into the LSTM cell. This added signal allows us to avoid both the carry-over effect that the outliers have on the forecasted point and a bias in the estimates of our LSTM model – caused by unusual or non-repetitive events. The proposed architecture led us to an end-to-end trainable model that we applied in this paper to a financial time-series forecasting problem. Our results demonstrate that the new proposed LSTM architecture achieves better performance than the state-of-the-art original LSTM model.

Phishing attacks continue to pose a serious threat to cybersecurity, underscoring the need for effective and scalable detection methods. This study evaluates the performance of Recurrent Neural Network (RNN) architectures—specifically Long Short-Term Memory (LSTM) and Bidirectional LSTM (BiLSTM)—for detecting phishing websites based on the sequential patterns in URL structures and webpage content. The LSTM model achieved an Area Under the Curve (AUC) of 0.92, with an overall accuracy of 98.4%, precision of 98.9%, and recall of 97.1%. These results indicate a strong ability to identify phishing URLs with a low false positive rate, although performance declined when detecting sophisticated or zero-day phishing attempts. The BiLSTM model, which incorporates bidirectional context, achieved a higher AUC of 0.95 and improved precision of 91% at a recall of 89%. However, it exhibited a slightly lower overall accuracy of 97.9% and a higher false negative rate. Both models effectively differentiated phishing from legitimate URLs, with BiLSTM offering improved context awareness but at the cost of reduced recall. The results suggest that while BiLSTM enhances contextual understanding, the LSTM model offers better generalization and computational efficiency for real-time deployment. This work highlights the potential of RNN-based models in phishing detection and the importance of balancing sensitivity and specificity in cybersecurity applications.

Wave runup prediction is necessary for offshore structure designs and early warnings. Data-driven methods based on machine learning have inspired reduced-order solutions for wave–structure interaction problems. This study provides the quantification of deep learning algorithms’ potential for wave runup prediction. Two prominent deep learning models were utilized to predict the wave runups along the fore column of semisubmersible under head seas. The long short-term memory (LSTM) and the temporal convolutional networks (TCNs) were comprehensively compared based on the datasets from a model test carried out in the deep ocean basin. The LSTM and TCN model structures were optimized to compare prediction accuracy and computational complexity reasonably. The results reveal that (1) both developed TCN and LSTM models had a satisfied prediction accuracy of over 90%. Their predictions were extended to 10 s into the future with accuracies over 80% and 45%, respectively. (2) With the noise-extended datasets, the LSTM model was robust to noises, while the TCN model showed better prediction performance on the extreme wave runup events. (3) The incident wave and dominant rotation provided the major information for wave runup prediction. TCN and LSTM models’ prediction accuracies were 91.5% and 89.3% based on the simplified input tensors composed of incident wave and pitch. The comparison showed the great potential of the TCN model to predict the nonlinear wave runup with less time and memory costs. The input tensors’ design and optimization based on physical understanding also play a significant role in the prediction performance.

This study demonstrates the application of deep learning approach specifically the deep learning for cyberfraud incidence classification and time series prediction in the South African financial institutions. Secondary data from the South African Banking Risk Information Centre (SABRIC) was employed and the data was trained under the deep learning paradigm using the Long Short-Term Memory (LSTM) model and adaptive moment estimation (ADAM) algorithm for fraud incidence classification and time series prediction of fraud incidences. Overall, there were 94.1% correct classifications as opposed to 5.9% incorrect classifications. Moreover, the accuracy, precision, recall and F1-score of the LSTM classification model were 71.668%, 87.5%, 99.1% and 78.78% respectively. This indicates that the developed LSTM model is suitable for classification purposes. In addition, the model’s performance improves as new datasets are fed in. This is evident as the root mean square error (RMSE) reduced from 253.5116 obtained initially to 150.9 after new data was fed in. This study contributes conceptually, theoretically and empirical to knowledge on cyberfraud mitigation. The results show that the LSTM model can be deployed for fraud classification and time series analysis of fraud incidences. The outcome of this study may promote cyber resilience and sustain the fight against the perpetration of cyber-related fraud in South Africa’s financial institutions. The use of the LSTM model for cyberfraud classification and time series prediction of cyberfraud incidences in the South African financial institutions demonstrated in this study is unique.

Surface Temperature (ST) is important in terms of surface energy and terrestrial water balances affecting urban ecosystems. In this study, to process the nonlinear changes of climatological variables by leveraging the distinct advantages of Long Short-Term Memory (LSTM) and Bidirectional Long Short-Term Memory (BiLSTM), we propose an LSTM-BiLSTM hybrid deep learning model which extracts multi-dimension features of inputs, i.e., backward (future to past) or forward (past to future) to predict ST. This study assessed the climatological variables, i.e., wind speed, wind direction, relative humidity, dew point temperature, and atmospheric pressure impact on ST using five major coastal cities of India: Chennai, Mangalore, Visakhapatnam, Cuddalore, and Cochin. The Recurrent Neural Networks (RNN) and hybrid LSTM-BiLSTM models have effectively predicted ST and outperformed the standalone Artificial Neural Networks (ANN), LSTM, and BiLSTM models. The RNN and LSTM-BiLSTM models have performed better in predicting ST for Mangalore (Nash-Sutcliffe efficiency (NSE)=0.91), followed by Cochin (NSE=0.89), Chennai (NSE=0.88), Cuddalore (NSE=0.88), and Vishakhapatnam (NSE=0.81). The hybrid data-driven modeling framework indicated that coupling the LSTM and BiLSTM models was proven effective in predicting the ST of coastal cities.