Identification of Apple Leaf Diseases Based on Deep Convolutional Neural Networks

Background Incidence rate of thyroid cancer is steadily increasing due to overdiagnosis and overtreatment. Thyroid ultrasound is commonly used to diagnose thyroid cancer. The aim of this study is to examine the accuracy of using deep convolutional neural network (DCNN) models to improve diagnosis of thyroid cancer by analyzing sonographic imaging data from clinical thyroid ultrasound. Methods A total of 131,731 sonographic images from 17,627 thyroid cancer patients and 180,668 sonographic images from 25,325 controls used as training set were obtained from Tianjin Cancer Hospital. Images from anatomical sites that did not have cancer according to location sign on the image were not included. All thyroid cancer patients and 13·2% of controls (51,255 images) were confirmed by pathological reports. DCNN is a specific type of neural network optimized for image recognition. We trained two DCNN models on the training set and subsequently evaluated the performance on one independent internal (Tianjin, 1,118 individuals) and two external (Jilin,154 individuals; Weihai, 1,420 individuals) validation sets. Individuals in the validation sets all have pathological examinations. We compared the specificity/sensitivity of DCNN models with the performance of six thyroid ultrasound radiologists on these three validation sets. Findings DCNN model achieved high performance in identifying thyroid cancer patients versus six experience radiologists: for Tianjin validation set, sensitivity was 92·2% versus 96·9% (95% CI 89·7% - 94·3% vs. 93·9% - 98·6%; p = 0·003), and specificity was 85·6% versus 59·4% (95% CI 82·4% - 88·4% vs. 53% - 65·6%; p < 0·0001); for Jilin validation set, sensitivity was 84·3% versus 92·9% (95% CI 73·6% - 91·9% vs. 84·1% - 97·6%; p = 0·05), and specificity was 86·9% versus 57·1% (95% CI 77·8% - 93·3% vs. 45·9% - 67·9%; p < 0·0001); for Weihai validation set, sensitivity was 84·5% versus 89% (95% CI 81·2% - 87·4% vs. 81·9% - 94%; p = 0·2), and specificity was 87·5% versus 68·6% (95% CI 85·1% - 89·6% vs. 60·7% - 75·8%; p < 0·0001). Interpretation DCNN models exhibited high accuracy, sensitivity, and specificity in identifying thyroid cancer patients at levels comparable to or higher than six experienced radiologists. Conferred by the high specificity of DCNN models, the rate of overdiagnosis and overtreatment of patients with thyroid cancer is expected to decrease. This supports future application of the deep learning models to clinical practice for thyroid cancer diagnosis. However, further validation of these DCNN models in prospective clinical trials is warranted. Funding The Program for Changjiang Scholars and Innovative Research Team in University in China (IRT_14R40), National Natural Science Foundation of China (31801117). Citation Format: Xiangchun Li, Sheng Zhang, Qiang Zhang, Xi Wei, Yi Pan, Jing Zhao, Xiaojie Xin, Xiaoqing Wang, Fan Yang, Jianxin Li, Meng Yang, Qinghua Wang, Xiangqian Zheng, Yanhui Zhao, Lun Zhang, Xudong Wang, Zhimin Zheng, Christopher T. Whitlow, Metin N. Gurcan, Boris Pasche, Ming Gao, Wei Zhang, Kexin Chen. Diagnosis of thyroid cancer using deep convolutional neural network models applied to sonographic images from clinical ultrasound exams [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2019; 2019 Mar 29-Apr 3; Atlanta, GA. Philadelphia (PA): AACR; Cancer Res 2019;79(13 Suppl):Abstract nr 1394.

Improved multi-scale inverse bottleneck residual network based on triplet parallel attention for apple leaf disease identification

BackgroundSurgical process modeling automatically identifies surgical phases, and further improvement in recognition accuracy is expected with deep learning. Surgical tool or time series information has been used to improve the recognition accuracy of a model. However, it is difficult to collect this information continuously intraoperatively. The present study aimed to develop a deep convolution neural network (CNN) model that correctly identifies the surgical phase during laparoscopic cholecystectomy (LC).MethodsWe divided LC into six surgical phases (P1–P6) and one redundant phase (P0). We prepared 115 LC videos and converted them to image frames at 3 fps. Three experienced doctors labeled the surgical phases in all image frames. Our deep CNN model was trained with 106 of the 115 annotation datasets and was evaluated with the remaining datasets. By depending on both the prediction probability and frequency for a certain period, we aimed for highly accurate surgical phase recognition in the operation room.ResultsNine full LC videos were converted into image frames and were fed to our deep CNN model. The average accuracy, precision, and recall were 0.970, 0.855, and 0.863, respectively.ConclusionThe deep learning CNN model in this study successfully identified both the six surgical phases and the redundant phase, P0, which may increase the versatility of the surgical process recognition model for clinical use. We believe that this model can be used in artificial intelligence for medical devices. The degree of recognition accuracy is expected to improve with developments in advanced deep learning algorithms.

The aim of the present study was to explore the diagnostic value of a deep convolutional neural network (DCNN) model for the diagnosis of pulmonary nodules in adolescent and young adult patients with osteosarcoma. For the present study, 675 chest CT images were retrospectively collected from 109 patients with clinically confirmed osteosarcoma who underwent chest CT examination at Hangzhou Third People's Hospital (Hangzhou, China) from March 2011 to February 2022. CT images were then evaluated using the DCNN and manual models. Subsequently, pulmonary nodules of osteosarcoma were divided into calcified nodules, solid nodules, partially solid nodules and ground glass nodules using the DCNN model. Those patients with osteosarcoma who were diagnosed and treated were followed up to observe dynamic changes in the pulmonary nodules. A total of 3,087 nodules were detected, while 278 nodules were missed compared with those determined using the reference standard given by the consensus of three Experienced radiologists., which was analyzed by two diagnostic radiologists. In the manual model group, 2,442 nodules were detected, while 657 nodules were missed. The DCNN model showed significantly higher sensitivity and specificity compared with the manual model (sensitivity, 0.923 vs. 0.908; specificity, 0.552 vs. 0.351; P<0.05). In addition, the DCNN model yielded an area under the curve (AUC) value of 0.795 [95% confidence interval (CI), 0.743-0.846], outperforming that of the manual model (AUC, 0.687; 95% CI, 0.629-0.732; P<0.05). The film reading time of the DCNN model was also significantly shorter compared with that of the manual model [mean ± standard deviation (SD); 173.25±24.10 vs. 328.32±22.72 sec; P<0.05)]. The AUC of calcified nodules, solid nodules, partially solid nodules and ground glass nodules was calculated to be 0.766, 0.771, 0.761 and 0.796, respectively, using the DCNN model. Using this model, the majority of the pulmonary nodules were detected in patients with osteosarcoma at the initial diagnosis (69/109, 62.3%), and the majority of these were found with multiple pulmonary nodules instead of a single nodule (71/109, 65.1% vs. 38/109, 34.9%). These data suggest that, compared with the manual model, the DCNN model proved to be beneficial for the detection of pulmonary nodules in adolescent and young adult patients with osteosarcoma, which may reduce the time of artificial radiograph reading. In conclusion, the proposed DCNN model, developed using data from 675 chest CT images retrospectively collected from 109 patients with clinically confirmed osteosarcoma, may be used as an effective tool to evaluate pulmonary nodules in patients with osteosarcoma.

Deep learning-based computed tomography applied to the diagnosis of rib fractures

Electricity theft is harmful to power grids. Integrating information flows with energy flows, smart grids can help to solve the problem of electricity theft owning to the availability of massive data generated from smart grids. The data analysis on the data of smart grids is helpful in detecting electricity theft because of the abnormal electricity consumption pattern of energy thieves. However, the existing methods have poor detection accuracy of electricity theft since most of them were conducted on one-dimensional (1-D) electricity consumption data and failed to capture the periodicity of electricity consumption. In this paper, we originally propose a novel electricity-theft detection method based on wide and deep convolutional neural networks (CNN) model to address the above concerns. In particular, wide and deep CNN model consists of two components: the wide component and the deep CNN component. The deep CNN component can accurately identify the nonperiodicity of electricity theft and the periodicity of normal electricity usage based on 2-D electricity consumption data. Meanwhile, the wide component can capture the global features of 1-D electricity consumption data. As a result, wide and deep CNN model can achieve the excellent performance in electricity-theft detection. Extensive experiments based on realistic dataset show that wide and deep CNN model outperforms other existing methods.

Apples are susceptible to infection by various pathogens during growth, which induces various leaf diseases and thus affects apple quality and yield. The timely and accurate identification of apple leaf diseases is essential to ensure the high-quality development of the apple industry. In practical applications in orchards, the complex background in which apple leaves are located poses certain difficulties for the identification of leaf diseases. Therefore, this paper suggests a novel approach to identifying and classifying apple leaf diseases in complex backgrounds. First, we used a bilateral filter-based MSRCR algorithm (BF-MSRCR) to pre-process the images, aiming to highlight the color and texture features of leaves and to reduce the difficulty of extracting leaf disease features with subsequent networks. Then, BAM-Net, with ConvNext-T as the backbone network, was designed to achieve an accurate classification of apple leaf diseases. In this network, we used the aggregate coordinate attention mechanism (ACAM) to strengthen the network’s attention to disease feature regions and to suppress the interference of redundant background information. Then, the multi-scale feature refinement module (MFRM) was used to further identify deeper disease features and to improve the network’s ability to discriminate between similar disease features. In our self-made complex background apple leaf disease dataset, the proposed method achieved 95.64% accuracy, 95.62% precision, 95.89% recall, and a 95.25% F1-score. Compared with existing methods, BAM-Net has higher disease recognition accuracy and classification results. It is worth mentioning that BAM-Net still performs well when applied to the task of the leaf disease identification of other crops in the PlantVillage public dataset. This indicates that BAM-Net has good generalization ability. Therefore, the method proposed in this paper can be helpful for apple disease control in modern agriculture, and it also provides a new reference for the disease identification of other crops.

Apple leaf diseases can cause significant crop failure and impact the economy of farmers and the agricultural industry. With the increasing demand for quality apples, it is important to develop effective and efficient solutions to detect apple plant diseases early. This research aims to develop an automated system that can identify diseases in apple plants based on leaf images using the Convolutional Neural Network (CNN) model. This model was developed with the ResNet50V2 architecture to classify four leaf conditions: three types of common diseases and one healthy condition. This research applies the CNN model for leaf image processing and the Waterfall system development method. The stages start from needs analysis by collecting data to be processed by the cnn model, interface design of the classification system, program code implementation, and functionality testing using black-box testing. CNN model development includes the stages of collecting datasets sourced from Malang apple plantations as many as 150 images and Kaggle public datasets totalling 3,071 images, then image preprocessing, model development and training. Our research results produced an apple plant disease classification system by implementing the CNN model. Based on the results of testing the system and the model used, it shows that the CNN model applied in the system achieves a classification accuracy of 99.01%, and the functionality of the system built runs well.

Early diagnosis and identification of plant leaf disease are important for long-term agriculture and maximum yield production. Deep Learning has developed as a powerful computing paradigm in the field of artificial intelligence, with the ability to handle a wide range of computer vision challenges. One of the deep learning architectures that suggest implicit results for image identification and object detection applications is the deep convolutional neural network (CNN). In this work, deep CNN models are used to identify and classify plant leaf diseases. We have used VGG16, VGG19, Inception V3 and analyzed their performance. Finally, machine learning techniques were used to determine if the new plant image was infected or not. The result verifies that using VGG16 model and LR classifier, an accuracy of 98.5% is obtained.

The accurate identification of apple leaf diseases is of great significance for controlling the spread of diseases and ensuring the healthy and stable development of the apple industry. In order to improve detection accuracy and efficiency, a deep learning model, which is called the Coordination Attention EfficientNet (CA-ENet), is proposed to identify different apple diseases. First, a coordinate attention block is integrated into the EfficientNet-B4 network, which embedded the spatial location information of the feature by channel attention to ensure that the model can learn both the channel and spatial location information of important features. Then, a depth-wise separable convolution is applied to the convolution module to reduce the number of parameters, and the h-swish activation function is introduced to achieve the fast and easy to quantify the process. Afterward, 5,170 images are collected in the field environment at the apple planting base of the Northwest A&F University, while 3,000 images are acquired from the PlantVillage public data set. Also, image augmentation techniques are used to generate an Apple Leaf Disease Identification Data set (ALDID), which contains 81,700 images. The experimental results show that the accuracy of the CA-ENet is 98.92% on the ALDID, and the average F1-score reaches .988, which is better than those of common models such as the ResNet-152, DenseNet-264, and ResNeXt-101. The generated test dataset is used to test the anti-interference ability of the model. The results show that the proposed method can achieve competitive performance on the apple disease identification task.

The theoretical basis of the discrete random sample batch classification is not clear and the sample division is not scientific during the process of Deep Convolutional Neural Network (DCNN) model training. Aiming at the problems above, starting from the DCNN detection recognition mechanism, the theory of random discrete samples is given and proved, and a scientific quantitative batch of sample input method is proposed. Combined with image preprocessing, based on the strategy of random dispersion of samples, and scientifically quantified sample input batches, the DCNN model is trained with limited label samples, and then the CT image recognition of pulmonary nodules is carried out. Experimental results based on the LIDC-ID-RI public dataset show that the sensitivity, specificity, and accuracy of the proposed method have reached 96.40%, 95.60%, and 96.00%, respectively. Compared with the multiscale convolutional neural network method and the multiscale multimode image fusion method, the recognition accuracy of the proposed method is improved by 1.6 and 3.49 percentage points, respectively.

For the purpose of applying information technology to the creation of ink style painting, the algorithm of ink painting rendering based on the deep learning framework and convolutional neural network model is designed and improved. Firstly, the ink style rendering program is written in Python. Secondly, VGG under Caffe architecture and Illustration 2Vec models are transplanted to TensorFlow architecture, and the image is rendered in ink style based on deep learning framework and convolutional neural network model. Finally, based on Node.js, the server-side program for image ink style rendering is built. Among them, Express is adopted as the Web-side framework, and the front-end page effect is completed. The results show that the ink rendering logic program is applicable, and the expected purpose is achieved.

Developing a treatment strategy that effectively prolongs the lives of people with brain tumors requires an accurate diagnosis of the condition. Therefore, improving the preoperative classification of meningiomas is a priority. Machine learning (ML) has made great strides thanks to the development of convolutional neural networks (CNNs) and computer-aided tumor detection systems. The deep convolutional layers automatically extract important and dependable information from the input space, in contrast to more traditional neural network layers. One recent and promising advancement in this field is ML. Still, there is a dearth of studies being carried out in this area. Therefore, starting with the analysis of magnetic resonance images, we have suggested in this research work a tried-and-tested and methodical strategy for real-time meningioma diagnosis by image segmentation using a very deep transfer learning CNN model or DNN model (VGG-16) with CUDA. Since the VGGNet CNN model has a greater level of accuracy than other deep CNN models like AlexNet, GoogleNet, etc., we have chosen to employ it. The VGG network that we have constructed with very small convolutional filters consists of 13 convolutional layers and 3 fully connected layers. Our VGGNet model takes in an sMRI FLAIR image input. The VGG's convolutional layers leverage a minimal receptive field, i.e., 3 × 3, the smallest possible size that still captures up/down and left/right. Moreover, there are also 1 × 1 convolution filters acting as a linear transformation of the input. This is followed by a ReLU unit. The convolution stride is fixed at 1 pixel to keep the spatial resolution preserved after convolution. All the hidden layers in our VGG network also use ReLU. A dataset consisting of 264 3D FLAIR sMRI image segments from three different classes (meningioma, tuberculoma, and normal) was employed. The number of epochs in the Sequential Model was set to 10. The Keras layers that we used were Dense, Dropout, Flatten, Batch Normalization, and ReLU. According to the simulation findings, our suggested model successfully classified all of the data in the dataset used, with a 99.0% overall accuracy. The performance metrics of the implemented model and confusion matrix for tumor classification indicate the model's high accuracy in brain tumor classification. The good outcomes demonstrate the possibility of our suggested method as a useful diagnostic tool, promoting better understanding, a prognostic tool for clinical outcomes, and an efficient brain tumor treatment planning tool. It was demonstrated that several performance metrics we computed using the confusion matrix of the previously used model were very good. Consequently, we think that the approach we have suggested is an important way to identify brain tumors.

Recent studies have demonstrated that a well designed deep convolutional neural network (CNN) model achieves competitive performances on detecting the presence of secret message in digital images, compared with the classical rich model based steganalysis. In this paper, we propose to investigate a category of very deep CNN model–the deep residual network (DRN), for steganalysis. DRN is suitable for steganalysis from two aspects. For the first, the DRN model usually contains a large number of network layers, which proves to be effective to capture the complex statistics of digital images. For the second, DRN's residual learning (ResL) method actively strengthens the signal coming from secret messages, which is extremely beneficial for the discrimination between cover images and stego images. Comprehensive experiments on standard dataset show that the DRN model achieves very low detection error rates for the state of arts steganographic algorithms. It also outperforms the classical rich model method and several recently proposed CNN based methods.

Polycystic ovary syndrome (PCOS) is a common endocrine disorder affecting reproductive-aged women, characterized by hormonal imbalance and ovarian cysts. Timely and accurate diagnosis of PCOS is crucial for effective management and prevention of associated complications. In this paper, we propose an automated diagnostic system for PCOS using deep learning and convolutional neural networks (CNNs). The dataset comprises ultrasound images of ovaries categorized into infected (PCOS) and not infected (non-PCOS) classes. Two CNN architectures, a deep CNN model and a CNN model with a last layer replaced by a support vector machine (SVM), are implemented and evaluated. Evaluation metrics include accuracy, precision, recall, and F1-score, demonstrating promising performance in accurately distinguishing between PCOS and non-PCOS cases. This automated diagnostic system offers a reliable and efficient approach for PCOS diagnosis, potentially reducing dependence on manual interpretation of ultrasound scans and improving healthcare outcomes for affected individuals. Key Words: Polycystic ovary syndrome (PCOS) , Deep learning, Convolutional neural networks (CNNs), Data augmentation, Ultrasound Scans