Identification of nonlinear dynamic systems classical methods versus radial basis function networks

The paper demonstrates that radial basis function network (RBFN) with adaptive centers and width can be used effectively for identification of nonlinear dynamic system. The proposed RBFN is trained by hybrid learning algorithm, which uses conjugate gradient optimization algorithm to obtain the center and width of each radial basis function and the least squares method to obtain the weights. To avoid capturing a local optimum, regularization error energy function is used and the centers of basis functions are initialized using a fuzzy C-means clustering method. Simulation results reveal that the identification schemes based on RBFN gives considerably better performance and show faster learning in comparison to previous methods

This article presents a theoretical framework for the identification of nonlinear dynamic MISO systems with orthonormal base function models on fundamental basics of the Volterra theory. In the past the Volterra theory was used for the identification of nonlinear dynamic SISO systems (e.g. Hammerstein and Wiener models). In principle it is possible to extend these approaches to systems with more than one input (i.e. MISO systems). In former times this failed due to a lack of computational performance. In this paper an approach is presented which allows the identification of arbitrary coupled Hammerstein and Wiener models with multiple inputs. Some fundamental considerations for the identification of MISO systems based on arbitrary coupled Hammerstein models are made and extended to MISO systems based on arbitrary coupled Wiener models. This extended Volterra theory results in equations where the unknown parameters can be separated of the input values in a linear manner. In order to approximate the truncated impulse responses of the linear dynamic systems and to reduce the number of unknown parameters orthonormal base functions (OBFs) are introduced. As an example the proposed identification method is applied to a MISO system based on forward and backward coupled Hammerstein and Wiener models.

Teaching Aids for Modeling and Control of Hybrid Systems (CAMCHS)

In this paper, the use of radial basis function network (RBFN) for simultaneous online identification and indirect adaptive control of nonlinear dynamical systems is demonstrated. The motivation of using RBFN comes from the simplicity of its structure and simpler mathematical formulation, which gives it an advantage over multi-layer feed-forward neural network (MLFFNN). Since most processes are nonlinear, the use of conventional proportional-integral-derivative controller is not useful. Most of the time plant’s dynamics information is not available. This creates another limitation on the use of conventional control techniques, which works only if plant’s dynamics information is available. The proposed controller is tested for parameter variations and disturbance effects. Simulation results showed that RBFN is able to capture the unknown dynamics as well as simultaneously able to adaptively control the plant. It is also found to compensate the effects of parameter variations and disturbances. The comparative analysis is also done with MLFFNN in each simulation example, and it is found that performance of RBFN is better than that of MLFFNN.

Three learning phases for radial-basis-function networks

Diagonal recurrent neural network based identification of nonlinear dynamical systems with Lyapunov stability based adaptive learning rates

In this paper, nonlinear dynamic system identification by using multiobjectively selected RBF network is considered. RBF networks are widely used as a model structure for nonlinear systems. The determination of its structure that is the number of basis functions is prior important step in system identification, and the tradeoff between model complexity and accuracy exists in this problem. By using multiobjective evolutionary algorithms, the candidates of the RBF network structure are obtained in the sense of Pareto optimality. We discuss an application to system identification by using such RBF networks having Pareto optimal structures. Some numerical simulations for nonlinear dynamic systems are carried out to show the applicability of the proposed approach.

A method for identifying nonlinear dynamic systems with noise is proposed by using probabilistic universal learning networks (PrULNs). PrULNs are extensions of universal learning networks (ULNs). ULNs form a superset of neural networks and were proposed to provide a universal framework for modeling and control of nonlinear large-scale complex systems. But the ULN does not provide any stochastic characteristics of the signals propagating through it. The PrULNs are equipped with machinery to calculate stochastic properties of signals and to train network parameters so that the signals behave with the pre-specified stochastic properties. On the other hand it is generally recognized that there exists an overfitting problem when identification of nonlinear dynamic systems with noise is done by neural networks. In this paper, it is shown from simulation results of identification of a nonlinear robot dynamics that PrULNs are useful for avoiding the overfitting.

A procedure based on the use of artificial neural networks for the identification of nonlinear dynamic systems is developed and applied to the damped Duffing oscillator under deterministic excitation. The “generalization” ability of neural networks is invoked to predict the response of the same nonlinear oscillator under stochastic excitations of differing magnitude. The analogy between the neural network approach and a qualitatively similar nonparametric identification technique previously developed by the authors is illustrated. Some of the computational aspects of identification by neural networks, as well as their fault-tolerant nature, are discussed. It is shown that neural networks provide high-fidelity mathematical models of structure-unknown nonlinear systems encountered in the applied mechanics field.

Nonlinear dynamic systems are characterized with uncertainties in terms of structure and parameters. These uncertainties cannot be described by deterministic models. The modelling and identification of nonlinear dynamic systems through the measured experimental data is a problem in engineering and technical processes. Therefore, field of system identification have become an important area of research. Fuzzy technology is an effective tool for dealing with complex nonlinear processes that are characterized with uncertain factors. In this paper, a novel approach based on Local Linear method learning in dynamical filter weights neurons for the identification of non-linear dynamic systems is presented. The fuzzy wavelet neural network combines wavelet theory with fuzzy logic and neural networks. Learning fuzzy rules and parameter update in fuzzy wavelet neural network is based on gradient decent method. The proposed approach is said to be Fuzzy Local Linear Wavelet Neural Network based model. It has been explained through examples. The structure is tested for the identification with both wavelet neural network and Fuzzy Local Linear Wavelet Neural Network that shows the comparative performance.KeywordsSystem IdentificationNon-linear SystemWavelet Neural NetworkFuzzy Wavelet Neural NetworkLocal Linear Wavelet Neural NetworkFuzzy Local Linear Wavelet Neural Network

In this paper, a novel radial basis function (RBF) neural network is proposed and applied successively for online stable identification and control of nonlinear discrete-time systems. The proposed RBF network has one hidden layer neural network (NN) with its all parameters being adaptable. The RBF network parameters are optimized by gradient descent method with stable learning rate whose stable convergence behavior is proved by Lyapunov stability approach. The aim of construction of the proposed RBF network is to combine power of the networks which have different mapping abilities. These networks are auto-regressive exogenous input model, nonlinear static NN model and nonlinear dynamic NN model. In simulations, the proposed network is applied for the direct inverse control of one benchmark nonlinear functioned system and Van de Vusse reaction in a CSTR discrete system even there exist large disturbances. From simulations, it is seen that the RBF network with stable learning rate identifies and controls nonlinear systems accurately.

Discovering nonlinear PDEs with sparse identification of nonlinear dynamical systems (SINDy) is hindered by high dimensionality, noise, and expensive data acquisition. We propose the greedy sampling neural network for sparse identification of nonlinear PDEs (GN-SINDy), a three–stage framework that integrates strategic sampling, differentiable surrogate modelling, and sparse equation discovery. First, a two–way Q-DEIM–based greedy strategy selects maximally informative space–time samples from snapshot data, drastically reducing data requirements. Second, a deep neural network (DNN) is trained as a differentiable surrogate of the solution field, enabling noise–robust analytic derivatives via automatic differentiation. Third, sparse regression with sparsity–promoting estimators [Brunton, S. L., Proctor, J. L., & Kutz, J. N. (2016a). Discovering governing equations from data by sparse identification of nonlinear dynamical systems. Proceedings of the National Academy of Sciences, 113(15), 3932–3937; Rudy, S. H., Brunton, S. L., Proctor, J. L., & Kutz, J. N. (2017). Data-driven discovery of partial differential equations. Science Advances, 3(4), e1602614.] is applied to recover the governing PDE. Building on the DeepMoD paradigm, GN-SINDy embeds greedy sampling into data acquisition and stabilises coefficient estimation through neural–enhanced differentiation. We analyze noise robustness, structural stability, and QR–based sampling strategies to guide sampler and hyperparameter selection. Experiments on Burgers', Allen–Cahn, and Korteweg–de Vries equations show that GN-SINDy reliably recovers governing PDEs using under 1 % of the data, outperforming DeepMoD in efficiency, support recovery, and robustness to noise.

Radial Basis Function (RBF) Network is popularly used for solving pattern recognition problems. The training of RBF Network is faster compared to multi layer perceptron using error backpropagation. However, the RBF Network uses the pseudo inverse matrix to calculate weights from the hidden layer to the output layer. Thus calculation cost increases when the number of data and the number of hidden units increase. In addition, in RBF Network the decision of optimum number of hidden units is difficult. It is also more prone to overtraining, needing repeated train and test cycles to ascertain a proper number of the Network hidden units, so that generalization performance is good. In this work, we propose a technique to set up RBF network parameters which is fast, as well as the number of hidden units are automatically determined. We start with training a Self-Organizing Maps (SOM), which is a unsupervised training, though our samples are labeled. SOM can find the distribution of data in multidimensional space, and map it on a two dimensional display. The results of SOM network is used to calculate the RBF parameters. It is shown by experiments that using the proposed method, RBF network parameters can be determined much faster compared to existing technique. Moreover, the recognition rate for the test data was higher, showing better generalization performance.

An identification method of nonlinear dynamic system is studied in this paper. First, suppose that the original nonlinear dynamic system is described by Hammerstein model. Then, an intermediate model is generated. Next, Parameters of the intermediate model are obtained using a Bacterial Chemotaxis Optimization (BCO) approach. Finally, through the relationships of the parameters of intermediate model and those of Hammerstein model, we derive the parameters of the system. Consequently, the original nonlinear dynamic system is identified. The feasibility and efficiency of the presented algorithm are demonstrated using numerical simulations.

We propose a differential radial basis function (RBF) network termed RBF-DiffNet—whose hidden layer blocks are partial differential equations (PDEs) linear in terms of the RBF—to make the baseline RBF network robust to noise in sequential data. Assuming that the sequential data derives from the discretisation of the solution to an underlying PDE, the differential RBF network learns constant linear coefficients of the PDE, consequently regularising the RBF network by following modified backward-Euler updates. We experimentally validate the differential RBF network on the logistic map chaotic timeseries as well as on 30 real-world timeseries provided by Walmart in the M5 forecasting competition. The proposed model is compared with the normalised and unnormalised RBF networks, ARIMA, and ensembles of multilayer perceptrons (MLPs) and recurrent networks with long short-term memory (LSTM) blocks. From the experimental results, RBF-DiffNet consistently shows a marked reduction in the prediction error over the baseline RBF network (e.g., 41% reduction in the root mean squared scaled error on the M5 dataset, and 53% reduction in the mean absolute error on the logistic map); RBF-DiffNet also shows a comparable performance to the LSTM ensemble but requires 99% less computational time. Our proposed network consequently enables more accurate predictions—in the presence of observational noise—in sequence modelling tasks such as timeseries forecasting that leverage the model interpretability, fast training, and function approximation properties of the RBF network.