Image preprocessing study on KPCA-based face recognition

This paper presents a novel Gabor-based kernel Principal Component Analysis (PCA) method by integrating the Gabor wavelet representation of face images and the kernel PCA method for face recognition. Gabor wavelets first derive desirable facial features characterized by spatial frequency, spatial locality, and orientation selectivity to cope with the variations due to illumination and facial expression changes. The kernel PCA method is then extended to include fractional power polynomial models for enhanced face recognition performance. A fractional power polynomial, however, does not necessarily define a kernel function, as it might not define a positive semidefinite Gram matrix. Note that the sigmoid kernels, one of the three classes of widely used kernel functions (polynomial kernels, Gaussian kernels, and sigmoid kernels), do not actually define a positive semidefinite Gram matrix either. Nevertheless, the sigmoid kernels have been successfully used in practice, such as in building support vector machines. In order to derive real kernel PCA features, we apply only those kernel PCA eigenvectors that are associated with positive eigenvalues. The feasibility of the Gabor-based kernel PCA method with fractional power polynomial models has been successfully tested on both frontal and pose-angled face recognition, using two data sets from the FERET database and the CMU PIE database, respectively. The FERET data set contains 600 frontal face images of 200 subjects, while the PIE data set consists of 680 images across five poses (left and right profiles, left and right half profiles, and frontal view) with two different facial expressions (neutral and smiling) of 68 subjects. The effectiveness of the Gabor-based kernel PCA method with fractional power polynomial models is shown in terms of both absolute performance indices and comparative performance against the PCA method, the kernel PCA method with polynomial kernels, the kernel PCA method with fractional power polynomial models, the Gabor wavelet-based PCA method, and the Gabor wavelet-based kernel PCA method with polynomial kernels.

In the recognition of digital modulation signals, extracting the characteristics that more easily distinguish the source signals, and have better performance of the signal, the source signals can be identified by using these characteristics. This paper optimized the original 20 features using orthogonal experiment method, and then identified the signals by the neural network, finally compared its results with that of PCA(principal component analysis) and KPCA(kernel principal component analysis) methods. Experimental results show that orthogonal experiment method in Gaussian and multipath environment can optimize the selection of the features to achieve higher recognition rate than the original features. Orthogonal experiment method has a better ability than PCA and KPCA methods in the optimal choice of these 20 characteristics.

Kernel principal component analysis (KPCA) as a powerful nonlinear feature extraction method has proven as a preprocessing step for classification algorithm. A face recognition approach based on KPCA and genetic algorithms (GAs) is proposed. By the use of the polynomial functions as a kernel function in KPCA, the high order relationships can be utilized and the nonlinear principal components can be obtained. After we obtain the nonlinear principal components, we use GAs to select the optimal feature set for classification. At the recognition stage, we employed linear support vector machines (SVM) as classifier for the recognition tasks. Two face databases were used to test our algorithm and higher recognition rates were obtained which show that our algorithm is effective.

Machine learning and pattern recognition recently become a hot topic in computing world. This is due to the fast-growing of resources as well as techniques that make it easier to solve machine learning and pattern recognition problems. Problems that require machine learning solutions may be very simple for humans but actually can be very complex for machines to solve them. Face recognition is amongst those problems. Almost all human can easily recognize others without require specific knowledge to do it, different from machines which require its. This paper discussed face recognition task using machine learning strategies which involved Kernel Principal Component Analysis (KPCA) and Support Vector Machine (SVM) to identify person. KPCA extracted features from 2D image input and produced the important features of an image input. The extracted face features are recognized by SVM by classifying human face according to their stored identity in a database. SVM, which was basically a binary classifier worked by using one-against-one strategy to compare the face feature vector of a single test image to the stored face image in a face image database. Experiment results on grayscale images with size 92x112 pixels gave 96.25% of accuracy rate. Hence, KPCA and SVM for face recognition is a robust machine learning method.

Face recognition is among the most productive image processing applications and has a pivotal role in the technical field. In the recent time automated face recognition has become a trend and has been developed very much, this is mainly due to two reasons first it is due to availability of modern technologies and second is due to the ability to save time using face recognition in the process of taking attendance of students. Its usage will grow vast in the future as it saves a lot of time. It consumes a lot of time to take attendance manually and few might also fake the attendance, in order to prevent time consumption and avoid faking the attendance. Face recognition is used to identify the person present in the class and mark their attendance , this is done with the help of image or video frame. We proposed an automatic attendance management system using techniques such as PCA algorithm. The face detection and recognition will automatically detect the students in the classroom and mark the attendance by recognizing the person. The traditional process of making attendance and present biometric systems are vulnerable to proxies. This paper is therefore proposed to tackle all these problems. The proposed system makes the use of Haar classifiers, KNN, CNN, SVM, Generative adversarial networks, and Gabor filters. After face recognition attendance reports will be generated and stored in excel format. The system is tested under various conditions like illumination, head movements, the variation of distance between the student and cameras. After vigorous testing overall complexity and accuracy are calculated. The Proposed system proved to be an efficient and robust device for taking attendance in a classroom without any time consumption and manual work. The system developed is cost-efficient and need less installation

<p>Visually impaired has the limitation in interacting with another human. They usually use the sense of hearing and touching their face to recognize human. Face recognition is a technology that can be used to solve this problem. This paper develops a smart cane function by integrated face recognition feature on the cane using Haar-Like features and Eigenfaces. This paper proposed a portable, real time, and wearable product. Raspberry Pi supports portability that affects the delay and computing speed of face recognition algorithms. Utilization of Raspi camera on the eyes glasses is for wearable purposes. Voice output provides information on whether the face is caught on camera or not. This prototype works well during the face detection and recognition process. It needs 3 seconds for one-face recognized in range 0.25 until 1.5 meters from the camera, until the sound and information are generated. It needs is me 5 second for two faces recognized and 10 seconds for 3 faces recognized by a system in the same range between face and the camera. The accuracy reaches 91.67% for the up-right position face but for other position the accuracy is only 18% until 32%.</p>

Aimed at the nonlinear properties of analog circuits features , kernel Principal Component Analysis(KPCA) combined with Support Vector Machine(SVM) based diagnostic method for faults of analog circuit was proposed in this paper. Here, uses KPCA to reduce the irrelevant features. The KPCA method is used to extract the initial features. The SVM is then applied to the circuit after features extraction. It can be used as a new idea for Fault Diagnosis of Analog Circuits. To better verify the superiority of the proposed method, KPCA+SVM classification results were compared with the results of PCA+SVM. It is concluded that KPCA+SVM classifier achieved a better performance than PCA+SVM in the terms of the accuracy.

Fault discriminant enhanced kernel principal component analysis incorporating prior fault information for monitoring nonlinear processes

Face recognition on mobile phones is gaining increasing attention due to the great variety of applications it can offer. In this paper, a fast recognition system on mobile phone is presented. First, Haar-like features with AdaBoost is used to detect face in pictures taken from phone camera. Second, in order to detect the eyes of face, we use a fast and effective method - eyes template matching in specific regions of the face, and then the local binary pattern (LBP) is adopted for fast face recognition. The experimental results demonstrate that the system introduced has a good performance in terms of recognition time and rate. Besides, various optimization techniques to speed up the face detection and recognition process are discussed.

From the past two decades, various spheres of activity are in the aspect of ‘Face recognition’ as an essential tool. The complete series of actions of face recognition is composed of 3 stages: Face Detection, Feature Extraction and Recognition. In this paper, we make an effort to put forth a new application of face recognition and detection in education. The proposed system scans the classroom and detects the face of the students in class and matches the scanned face with the templates that is available in the database and updates the attendance of the respective students.

Traditional face recognition methods such as Principal Components Analysis(PCA), Independent Component Analysis(ICA) and Linear Discriminant Analysis(LDA) are linear discriminant methods, but in the real situation, a lot of problems can't be linear discriminated; therefore, researchers proposed face recognition method based on kernel techniques which can transform the nonlinear problem of inputting space into the linear problem of high dimensional space. In this paper, we propose a recognition method based on kernel function which combines kernel Fisher Discriminant Analysis(KFDA) with kernel Principle Components Analysis(KPCA) and use typical ORL(Olivetti Research Laboratory) face database as our experimental database. There are four key steps: constructing feature subspace, image projection, feature extraction and image recognition. We found that the recognition accuracy has been greatly improved by using nonlinear identification method and combined feature extraction methods. We use MATLAB software as the platform, and use the GUI to demonstrate the process of face recognition in order to achieving human-computer interaction and making the process and result more intuitive.

In this paper, we are going to propose an online radial basis function (RBF) neural network algorithm without any preprocessing step. Then a kernel principal component analysis (KPCA) is coupled with the proposed online RBF neural network algorithm. Indeed, the KPCA method is used as a preprocessing step to reduce the feature dimension which fed to the RBF neural network. Reducing memory requirements of the models makes RBF neural network training efficient and fast. These two proposed algorithms are applied, with success, for identification of a mobile robot position. The simulation results present that the used sigmoid function as a kernel, compared to other kernel functions, which gives an excellent model and a minimum mean square error.

This study proposes a diagnosis method for IGBT open circuit fault and sensor drift fault in CRH2 through ensemble empirical mode decomposition (EEMD) and an improved kernel principal component analysis (KPCA) way. EEMD is modified to reduce noise in the current and voltage signals. Subsequently, an improved KPCA method using weight matrix to highlighting fault information is developed to detect and diagnose the composite fault. Then the three-phase current averaging method is applied to perform fault location. Numerical simulation results verify the validity and availability of the composite fault detection method.

This paper presents a novel face recognition method by integrating the Gabor wavelet representation of face images and the enhanced powerful discriminator, complete Kernel Fisher Discriminant (CKFD) with fractional power polynomial (FPP) models. The novelty of this paper comes from (1) Gabor wavelet, is employed to extract desirable facial features characterized by spatial frequency, spatial locality and orientation selectivity to cope with the variations in illumination and facial expressions, which improves the recognition performance; (2) a recently proposed powerful discriminator, namely CKFD, which enhances its discriminating ability using two kinds of discriminant information (i.e., regular and irregular information), is employed to classify the Gabor features; (3) the FPP models, are employed to CKFD analysis to enhance the discriminating ability. Comparing with existing principal component analysis, linear discriminant analysis, kernel principal component analysis, KFD and CKFD methods, the proposed method gives the superior results with the ORL, Yale and UMIST face databases.

Abstract— In this digital era, face recognition system plays a vital role in almost every sector. Face recognition is one of the mostly used biometrics. It can used for security, authentication, identification, and has got many more advantages. Despite of having low accuracy when compared to iris recognition and fingerprint recognition, it is being widely used due to its contactless and non-invasive process. Furthermore, face recognition system can also be used for attendance marking in schools, colleges, offices, etc. This system aims to build a class attendance system which uses the concept of face recognition as existing manual attendance system is time consuming and cumbersome to maintain. And there may be chances of proxy attendance. Thus, the need for this system increases. This system consists of four phases- database creation, face detection, face recognition, attendance updation. Database is created by the images of the students in class. Face detection and recognition is performed using Haar-Cascade classifier and Local Binary Pattern Histogram algorithm respectively. Faces are detected and recognized from live streaming video of the classroom. Keywords—Face Recognition; Face Detection; Haar-Cascade; Opencv :library are used in face recognition system.