Imaging and applied optics: introduction to the feature issue.

To establish a 3D ultrasound imaging system based on pulse-triggered image acquisition using the linear probe on the VerasonicsTM vantage 128 platform and evaluate its performance in scanning standard phantom and human carotid artery. The 3D ultrasound imaging system included 3 modules for probe motion control, image acquisition and storage, and 3D image reconstruction and display. To improve the precision of image acquisition, we used fixed frequency pulses to control the external trigger function combined with mechanical scanning. Voxel-based 3D reconstruction was used for image reconstruction and display. The user interface was designed to allow direct operations of the platform. We carried out scanning tests of standard ultrasound phantom and human carotid artery to evaluate the performance of this imaging system. We successfully constructed a 3D ultrasound imaging system based on pulse-triggered image acquisition. The results of standard phantom and human carotid scanning tests showed that each module of the system was fully functional. The self-designed user interface of this ultrasound imaging system allowed full control of the system functions for original image acquisition, 3D image reconstruction, and display of cross-sections in 3 different views. This 3D ultrasound imaging system achieves high-quality 3D ultrasound imaging and provides the basis for further study and clinical application of 3D ultrasound imaging.

1 - 3D Echocardiographic Image Acquisition, Display, and Analysis

Accurate Transrectal Ultrasound (TRUS)-guided prostate needle biopsy requires registering preoperative 3D TRUS or MR image, in which tumors and other suspicious areas are visible, to intraoperative 2D TRUS images. Such image registration is time-consuming while its real-time implementation is yet to be developed. To bypass this registration step, robotic needle biopsy systems can be used to place the US probe at the same position relative to the prostate during the 3D and 2D image acquisition to ensure similar prostate deformation. To have such similar deformation, only visual feedback is not sufficient as such feedback can be used to only guarantee that the whole prostate is within the field of view irrespective of the probe's orientation. As such, contact pressure feedback can be utilized to ensure consistent minimum contact between the probe and prostate. A robotic system is proposed where a TRUS probe with pressure sensor array is used. The contact pressure can be measured during imaging and used to provide feedback in conjunction with an optimization algorithm for consistent probe positioning. The robotic system is driven by the feedback to position the probe such that pressure pattern of the sensors during 2D image acquisition is similar to the pressure pattern during 3D image acquisition. The proposed method takes into account the patient's body movement expected during image acquisition. In this study, an in silico phantom is used where the simulated contact pressure distribution required in the optimization algorithm is obtained using a prostate finite element model. Starting from an arbitrary position where the probe contacts the phantom, this position was varied systematically until a position corresponding to maximum pressure pattern similarity between contact pressure patterns corresponding to the 2D and 3D imaging was achieved successfully. Results obtained from the in silico phantom study indicate that the proposed technique is capable of ensuring having only minimal relative prostate deformation between preoperative image acquisition and intraoperative imaging used for guiding needle biopsy, paving the way for faster and more accurate registration.

This paper presents a novel 3D display using a new principle which has the features of both Integral Imaging (II) and volumetric display. The proposed display consists of one 2D display and two lens arrays, a convex lens array and a concave lens array. The two lens arrays are placed between the 2D display and the observer. When the observer watches the 2D display through the two lens arrays, he feels that the image displayed by 2D display is reproduced at the position which is different from the position of the 2D display. Furthermore, by changing the position of the 2D display, the image is reproduced at the different position than before. Therefore the various depth images are reproduced by moving 2D display. This is how the proposed display reconstructs 3D space. Here, we simulated this display with ray tracing and checked its validity.

Real-Time Three-Dimensional Transesophageal Echocardiography Is Useful for the Localization of a Small Mitral Paravalvular Leak

Abstract. As remote sensing and variable-rate technology are becoming more available for aerial applicators, practical methodologies for effective integration of these technologies are needed for site-specific aerial applications of crop production and protection materials. The objectives of this study were to demonstrate how to integrate an airborne multispectral imaging system and an IntelliStar variable-rate aerial application system for site-specific management of the winter weed henbit. The airborne imaging system was used to acquire natural color and near-infrared (NIR) images of a fallow field near College Station, Texas, for mapping the infestation of henbit shortly before herbicide application. The images were then rectified, classified, and converted to a binary prescription map with the full application rate on infested areas and the zero rate on non-infested areas. The variable-rate aerial application system mounted on an agricultural aircraft was used to apply glyphosate over the field based on the prescription map. Airborne imagery was collected 14 days after the herbicide application. The as-applied map along with the prescription map and the post-application imagery were used to assess the performance of the site-specific application. Spatial and statistical analysis results showed that the imaging system was effective for mapping henbit infestations and for assessing the performance of site-specific herbicide application, and that the variable-rate system accurately delivered the product at the desired rate to the prescribed areas for effective control of the weed. The methodology and results from this study will be useful for aerial applicators to incorporate airborne imaging and variable-rate application systems into their aerial application business to increase their capabilities and profits. Keywords: Aerial application, As-applied map, Henbit, Imaging system, Prescription map, Variable-rate technology.

A survey is given of the major developments in three-dimensional velocity field measurements using the tomographic particle image velocimetry (PIV) technique. The appearance of tomo-PIV dates back seven years from the present review (Elsinga et al 2005a 6th Int. Symp. PIV (Pasadena, CA)) and this approach has rapidly spread as a versatile, robust and accurate technique to investigate three-dimensional flows (Arroyo and Hinsch 2008 Topics in Applied Physics vol 112 ed A Schröder and C E Willert (Berlin: Springer) pp 127–54) and turbulence physics in particular. A considerable number of applications have been achieved over a wide range of flow problems, which requires the current status and capabilities of tomographic PIV to be reviewed. The fundamental aspects of the technique are discussed beginning from hardware considerations for volume illumination, imaging systems, their configurations and system calibration. The data processing aspects are of uppermost importance: image pre-processing, 3D object reconstruction and particle motion analysis are presented with their fundamental aspects along with the most advanced approaches. Reconstruction and cross-correlation algorithms, attaining higher measurement precision, spatial resolution or higher computational efficiency, are also discussed. The exploitation of 3D and time-resolved (4D) tomographic PIV data includes the evaluation of flow field pressure on the basis of the flow governing equation. The discussion also covers a-posteriori error analysis techniques. The most relevant applications of tomo-PIV in fluid mechanics are surveyed, covering experiments in air and water flows. In measurements in flow regimes from low-speed to supersonic, most emphasis is given to the complex 3D organization of turbulent coherent structures.

Remote display and interaction of 3D reconstruction of medical images has been achieved utilizing VTK (the Visualization Toolkit) and HTML5. Aiming at the problem that the network coordination of the medical 3D reconstruction platforms are generally unsatisfactory, the feasibility of achieving multi-frames-based remote interaction of 3D reconstruction of medical images using Canvas and WebSocket in HTML5 has been discussed and verified by experiments. Furthermore, a method to display 3D images on pure Web client based on B/S (Browser/Server) framework has been put forward. The 3D reconstruction system with the application of this method has been proved to be effective in displaying and interacting on both PC and mobile platform with almost real-time effects. This feasible method has certain practical application in remote medical assistance.

Since our initial development of the 256-detector row CT scanner (256-row CT) for four-dimensional (4D) imaging of moving organs in 2003, the results of physical performance and those in animal and human studies have suggested that this scanner may be useful in the examination of moving organs such as the heart and lungs. We have now developed a second model of the 256-row CT with improved specifications, with a scan time of 0.5 s/rotation at the highest speed and real-time reconstruction and display of dynamic 3D images (4D images). Here, we investigated the image characteristics of the new model, including spatial resolution, noise, and low-contrast detectability, as well as the dose profile and its integral in stationary phantoms. One volunteer and one patient with lung cancer were scanned, and their images were evaluated. The results show that all characteristics have been improved compared with those of the first model, with a remarkable improvement in the low-contrast detectability and slice sensitivity profile. In a contrast study, coronary arteries were clearly visualized in the normal heart without electrocardiographic gating. Movement and deformation of the tumor in the patient with lung cancer was captured in a study of a single breath cycle. The second model 256-row CT with improved characteristics may be beneficial in imaging of moving organs such as the heart and lungs, and may enable cerebral perfusion studies of the whole brain.

Laser three-dimensional (3D) image is a novel non-cooperative target 3D image acquisition technology, and the improvements in detection capability and imaging accuracy of the system are critically dependent on efficient echo-signal processing technique and 3D reconstruction method. The registration process is an essential step in array 3D imaging laser point cloud data processing. Registration of point clouds is an effective method that solves the problem caused by the target self-occlusion in the laser 3D imaging system. The accurate registration result will help provide better support for subsequent applications, such as object reconstruction and target recognition. In this study, a set of thresholds in the iterative closest point (ICP) algorithm is analysed on the basis of the characteristics of the laser array 3D imaging system and is combined with the range error and visual lateral resolution of the system, which are both important parameters in the imaging system. To improve the accuracy and speed of registration, the stop threshold of the iterative algorithm and the corresponding point-distance threshold in the algorithm are established in a novel way based on the range error and visual lateral resolution of the system. This forms the foundation, based on which an adaptive threshold ICP algorithm is proposed. The principal idea of the algorithm is to improve the threshold set that has a considerable effect on the accuracy and speed of registration. At first, the characteristics of the imaging point clouds of the laser array 3D imaging system are analysed in the algorithm. Based on this analysis, the distance between the two point clouds and corresponding points with ideal registrations are estimated theoretically, according to the range error and visual lateral resolution of the system. The simulation results show that the theoretically estimated results and actual results have the same variation tendency, thus providing a theoretical basis for subsequent improvements. Next, the estimated results are added according to the iterative closest point algorithm. This implies that the registration thresholds are capable of changing and adapting under different iterations and imaging systems, thus improving the speed and accuracy of registrations. This phenomenon is not seen in other algorithms. Experiments involving laser array imaging of a point cloud and laser scanning of depth imaging data show that the algorithm is practical and effective for both imaging types of point clouds and can improve the speed and accuracy of registration notably. The effectiveness and feasibility of the proposed algorithm are thus verified. In addition, for its full consideration of the imaging system, the basic idea of the proposed algorithm can be used for designing future applications as required.

To design and implement a set of quality assurance tests for an innovative 3D volumetric display for radiation treatment planning applications. A genuine 3D display (Perspecta Spatial 3D, Actuality‐Systems Inc., Bedford, MA) has been integrated with the Pinnacle TPS (Philips Medical Systems, Madison WI), for treatment planning. The Perspecta 3D display renders a 25 cm diameter volume that is viewable from any side, floating within a translucent dome. In addition to displaying all 3D data exported from Pinnacle, the system provides a 3D mouse to define beam angles and apertures and to measure distance. The focus of this work is the design and implementation of a quality assurance program for 3D displays and specific 3D planning issues as guided by AAPM Task Group Report 53. A series of acceptance and quality assurance tests have been designed to evaluate the accuracy of CT images, contours, beams, and dose distributions as displayed on Perspecta. Three‐dimensional matrices, rulers and phantoms with known spatial dimensions were used to check Perspecta's absolute spatial accuracy. In addition, a system of tests was designed to confirm Perspecta's ability to import and display Pinnacle data consistently. CT scans of phantoms were used to confirm beam field size, divergence, and gantry and couch angular accuracy as displayed on Perspecta. Beam angles were verified through Cartesian coordinate system measurements and by CT scans of phantoms rotated at known angles. Beams designed on Perspecta were exported to Pinnacle and checked for accuracy. Dose at sampled points were checked for consistency with Pinnacle and agreed within 1% or 1 mm. All data exported from Pinnacle to Perspecta was displayed consistently. The 3D spatial display of images, contours, and dose distributions were consistent with Pinnacle display. When measured by the 3D ruler, the distances between any two points calculated using Perspecta agreed with Pinnacle within the measurement errorPACS number: 07.07.Hj, 87.55.Qr, 87.56.Da, 87.55.D‐; Radiation Treatment Planning

Dual-layer electrode-driven liquid crystal lens with electrically tunable focal length and focal plane

Line-scan hyperspectral imaging system for real-time inspection of poultry carcasses with fecal material and ingesta

Vertical-cavity surface-emitting laser diodes (VCSELs) provide extraordinary properties like sub-mA threshold current, multi-GHz modulation capability, or relative intensity noise close to the quantum limit. VCSELs have become a preferred light source for optical sensor technologies and imaging systems. The purpose is to review some recent developments with special attention to mass market employments and to reveal future applications.

Display of 3D Multimodality Cardiac Images With 2D Polar Maps: Simplicity Can Be a Virtue