• Home
  • Search
  • Implementation of Traveling Wave Models of Grating-Based Integrated Optical Devices for Circuit Simulation
  • Cite Icon1
  • https://doi.org/10.1109/access.2023.3250611Copy DOI Icon

Implementation of Traveling Wave Models of Grating-Based Integrated Optical Devices for Circuit Simulation

Show More
  • Abstract
  • Literature Map
  • References
  • Citations
  • Similar Papers
Abstract

This paper presents the development and use of a traveling wave model of waveguide-based grating devices for use as a compact model in a circuit-level simulator. Both passive and active devices are modeled, with the grating being characterized by coupling coefficients for the two counter-propagating waves. It is shown how the implicit carrier frequency can be offset from the Bragg frequency using two possible methods: either by the static detuning of the model or introducing a phase modulation into the coupling coefficients. Other physical aspects of the model are addressed such as dispersion and energy conservation. A comparison to a 1D Yee-cell model is used to verify the applicability of the traveling wave model. As an example of the circuit simulation of a passive device, an optical code generating application is used and it is noted that for a passive device the interface between the compact model and the circuit simulator is not a concern. Using traveling-wave-based laser simulations of grating-based laser structures it is demonstrated that the model captures the complex behaviour of the devices. In particular the lasing frequency is naturally produced from the model and the introduction of delay elements into the structure can be used to restrict the laser to single mode operation. A number of examples are used to illustrate important aspects of its use as a compact model. Firstly, it is shown that an operating point for either of the laser configurations can be constructed and detuning used to produce an un-modulated output, allowing for much more efficient simulations. A final example uses a directly modulated laser to illustrate the effect of back reflection on the stability of the laser simulation.

Similar Papers
  • Research Article
  • Citations45

Qucs: A GPL software package for circuit simulation, compact device modelling and circuit macromodelling from DC to RF and beyond

  • Sep 05, 2008
  • International Journal of Numerical Modelling: Electronic Networks, Devices and Fields
  • M E Brinson +1
  • Research Article
  • Citations9

Monolithic integration of low-pass filters with ESD protections on p+ silicon/porous silicon substrates

  • Nov 27, 2015
  • Solid-State Electronics
  • Marie Capelle +4
  • Conference Article
  • Citations2

Integrated 1/spl times/2 loss-less Y-junction splitter on a passive active resonant coupler platform

  • Jan 01, 2000
  • S.S Saini +9
  • Research Article
  • Citations82

Recent progress on metamaterials: From effective medium model to real-time information processing system

  • May 23, 2019
  • Progress in Quantum Electronics
  • Xiaojian Fu +1
  • Research Article
  • Citations1

(Invited) The Compact Models and Parameter Extraction for Thin Film Transistors

  • Aug 18, 2016
  • Electrochemical Society Transactions
  • Michael Shur
  • Conference Article
  • Citations2

Compact modelling in circuit simulation: the general purpose analyser "OPTIMA 3"

  • Jan 01, 1994
  • J Ogrodzki +1
  • Conference Article

Neural Network-Based Compact Model for Multi-Snapback Behavior in ESD Devices

  • Dec 10, 2025
  • Fredo Chavez +1
  • PDF
  • Research Article
  • Citations17

A Generalized Workflow for Creating Machine Learning-Powered Compact Models for Multi-State Devices

  • Jan 01, 2022
  • IEEE Access
  • Jack Hutchins +6
  • Research Article

Analysis of the Application of Automation in Smart Industry

  • Jan 10, 2025
  • Applied and Computational Engineering
  • Shichen Ruan
  • Conference Article
  • Citations1

Coupled device, circuit and interconnect simulation

  • Sep 16, 2003
  • W Schilders +1
  • Conference Article
  • Citations1

An efficient algorithm for the incorporation of diodes into FDTD method

  • Jul 01, 2010
  • Hsin Hsiang Su +2
  • Conference Article
  • Citations7

Evaluation of Glob Top and Underfill Encapsulated Active and Passive Structures for Millimeter Wave Applications

  • Sep 01, 1997
  • G Baumann +5
  • Research Article
  • Citations6

A Compact Modeling Methodology for Experimental Memristive Devices

  • Nov 01, 2022
  • IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
  • Jesús Jiménez-León +2
  • Research Article
  • Citations15

A new bone conduction hearing aid to predict hearing outcome with an active implanted device.

  • May 03, 2019
  • European Archives of Oto-Rhino-Laryngology
  • Andrea Canale +6
  • Conference Article

CRLH unit cells — The key for new design methods of distributed active and passive microwave devices and circuits

  • Oct 01, 2016
  • Stefan Simion +1
Cactus Communications logo

Copyright 2026 Cactus Communications. All rights reserved.